There was a problem starting C:\Program Files (x86)\Think Pad\Utilities\PWMTR64V.dll
Getting this error on every reboot: There was a problem starting C:\Program Files (x86)\Think Pad\Utilities\PWMTR64V.dll Cannot uninstall Lenovo Power Power Management Drive All on Windows 10 64bit. Lenovo Twist. Had installed the latest version (1.67.10.15).
There are 2 separate things here:
1. Lenovo Power Management Driver - this is supported on Windows 10 but needs to be updated to a recent version: http://support.lenovo.com/us/en/downloads/migr-4gxpeg
2. Power Manager - this is not supported on Windows 10 and should be uninstalled.
So have you uninstalled "Power Manager"? The PWMTR64V.dll file comes from Power Manager
Similar Messages
-
The module could not be found.
I am running windows 7 64bit
Uninstalled a printer. Now my computer is complaining that the file is no longer there. It is trying to detect this at startup every time I turn on my computer. How do I get my computer to stop looking for this at startup?Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I get this error from my pc stating
there is a problem starting c:\program files\hp\hp deskjet 2510 series\bin\hpstatusbl.dll
Only after powering up this device the window prompt the above
OS: W8.1
HP 2000 notebook PCAnyone got answers or?
-
There was a problem starting C:\Program
Just used the Lenovo update gadget.
During reboot I get this message several times.
There was a problem starting C:\Program
HELP!Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Keep getting the error message below every time I start my computer:
Run DLL
There was a problem starting
C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
The specified module could not be found.RunDLL is a legitimate Windows file that executes/loads .dll (Dynamic Link Library) modules which too can be legitimate or sometimes malware related. A RunDLL "Error loading... message usually occurs when the .dll file that was set to run at startup in the registry or as a scheduled task has been deleted. Windows is trying to load this file(s) but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry still remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads.
To resolve this, download AutoRuns and save it to your Desktop from this site:
http://technet.microsoft.com/en-us/sysinternals/bb963902
and follow these Steps
* Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
* Open the folder and double-click on autoruns.exe to launch it.
* Vista/Windows 7/8 users right-click and select Run As Administrator.
* Please be patient as it scans and populates the entries.
* When finished scanning, it will say Ready at the at the bottom and list all entries under the Everything tab.
* In the top menu, click File > Find... and type the file name (backgroundcontainer.dll) related to the error message, then click Find Next.
* Alternatively, you can scroll through the list and look for any entry related to backgroundcontainer.dll and conduit.
* If found, right-click on the entry and choose delete.
* Exit Autoruns and reboot your computer when done.
'''An alternate method to resolve this issue is as follows:'''
1. Go to Start > Control Panel > Administrative Tools.
2. Open Task Scheduler and click on Task Scheduler Library.
3. Look through the list for an entry related to BackgroundContainer.
4. If found, right-click on it and select Delete.
5. Exit all programs and reboot the computer when done.
Also Scan your system with the tools listed in this Article:
[[Troubleshoot Firefox issues caused by malware]] -
there was a problem starting.....adobe\wnbqc.dll The specified file could not be found
I recently updated adobe reader and while the program is working fine, I continue to get this pop up when starting my computer. What can I do?Among many things, I do see the adobe mentioned above with unknown listed as the manufacturer. Should I disable it? Remove it? Norton tech help says it is not a virus.
-
Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
RichardEvery time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard
Richard
It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions database. I suggest you, firstly, download and
run the free Malwarebytes' Anti-Malware from
http://www.malwarebytes.org/free/ to ensure that you are completely clean. If you then restart the computer and the message is still appearing try one of these, but it is prudent to create a system restore point before you change the registry in (1) below
by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab > Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other ‘autorun’ keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and
type the rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.
Ninety-nine per cent of politicians give the rest a bad name. -
{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL
I keep getting this error message.....why? "
{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL
This question was solved.
View Solution.I understand you are getting an error message relating to a runDLL.
What is the product number of the notebook? This can typically be found on a label on the underside of the notebook or in the battery compartment. This label should also contain the serial number.
NOTE: Do NOT provide the serial number.
What OS is the system using? For example, Windows 7 or Windows Vista.
Did this happen after a particular program was installed or uninstalled?
RunDLL errors can be the result of malware. Have you scanned the system for malware using an updated anti-virus program?
Does it happen in a clean boot state? This document details how to enter a clean boot state.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanksHi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena -
I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.Can you drag it to the Desktop?
-
I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found. -
Unable to install itunes on windows 7. Gives message Error writing to file C:\Program Files(x86)\itunes\mozilla plugins\npitunes.dll and then starts rolling back.
If you uninstall your Firefox, and then try the install again, does the iTunes install go through? (If it does, reinstall your Firefox.)
-
"There was a problem starting C:\Windows\System32\LogiLDA.dll"
Message said that specific mode cannot be found.
I can't imagine why you are asking about a specifically Windows problem in an Apple forum, but possibly the comments in this page may assist you.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/specified -module-could-not-be-found-logildadll/9c227c15-d0d6-4e24-946f-ac0dbbbb10d1
If they don't then Google may lead you to an answer: these Apple Discussion Communities are fairly unlikely to. -
"There was a problem starting" MOZILL~1.DLL "nof found"
This shows when I first logon. I use WINDOWS7. Starting happening about two months ago. I always accept new updates from Mozilla. This error comes from WINDOWS7 startup - not when I start Mozilla. I get a WINDOWS7 information box display
Among many things, I do see the adobe mentioned above with unknown listed as the manufacturer. Should I disable it? Remove it? Norton tech help says it is not a virus.
-
There was a problem downloading song. The file seems to be corrupted.
Hi
I'm trying to download an album i purchased but i'm constantly getting the message "There was a problem downloading X. The file seems to be corrupted" for every song I try to download. Also if i try to stream the song it says "This computer is not authorized to play X. Would you like to authorize it". But my computer is already authorized and when I try to authorize it again, it says this computer is already authorized.
I've tried downloading them through the purchased section of the store (which causes itunes to crash 50% of the time) with no luck. I've also reinstalled itunes. This only started happening once I installed the latest version of itunes.
Any help would be appreciatedI'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)
Maybe you are looking for
-
Item Level Security not working with Tabs
I've Portal 9.0.2.2.22 This issue is with Item Level Security with Tabs. Here is what I've have: Page Group: MyPagegroup (Privs: portal => Manage All) Page: MyTestPage (Privs: portal => Manage All, testUser => View) There is a tab called MyTab on pag
-
Large Message Payload - Queue selection
Hi, I have one message with payload size around 105MB when I am trying to send through XI this message gets failed in the queue (inbound) of integration engine saying some memory problem to process the message. I have seen the queue it is picking
-
Hi, we are in big trouble here. On Mac OS X 10.4 it was no problem building PHP with additional modules. Unfortunately it´s not working this time. This is the error message i got when building php: checking for mSQL support... no checking for MSSQL s
-
I just got a TV because I have a large library of music (400 to 600 GB of Apple Lossless) plus a bunch of movies. I got the 160 because of the movies and I was told that I can stream and sync from the same computer. Is this true? If so, how? Thanks
-
Movies not showing up on movie sync screen??
I downloaded the digital copy of Harry Potter, and a special features "movie" came with it as well. Part one, part two and the special feature movie shows up in iTunes as movies, but when I try to sync them, the special features "movie" does not sho