There was a problem starting C:\Program
Just used the Lenovo update gadget.
During reboot I get this message several times.
There was a problem starting C:\Program
HELP!
Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
Getting this error on every reboot: There was a problem starting C:\Program Files (x86)\Think Pad\Utilities\PWMTR64V.dll Cannot uninstall Lenovo Power Power Management Drive All on Windows 10 64bit. Lenovo Twist. Had installed the latest version (1.67.10.15).
There are 2 separate things here:
1. Lenovo Power Management Driver - this is supported on Windows 10 but needs to be updated to a recent version: http://support.lenovo.com/us/en/downloads/migr-4gxpeg
2. Power Manager - this is not supported on Windows 10 and should be uninstalled.
So have you uninstalled "Power Manager"? The PWMTR64V.dll file comes from Power Manager -
The module could not be found.
I am running windows 7 64bit
Uninstalled a printer. Now my computer is complaining that the file is no longer there. It is trying to detect this at startup every time I turn on my computer. How do I get my computer to stop looking for this at startup?Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
there was a problem starting.....adobe\wnbqc.dll The specified file could not be found
I recently updated adobe reader and while the program is working fine, I continue to get this pop up when starting my computer. What can I do?Among many things, I do see the adobe mentioned above with unknown listed as the manufacturer. Should I disable it? Remove it? Norton tech help says it is not a virus.
-
Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
RichardEvery time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard
Richard
It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions database. I suggest you, firstly, download and
run the free Malwarebytes' Anti-Malware from
http://www.malwarebytes.org/free/ to ensure that you are completely clean. If you then restart the computer and the message is still appearing try one of these, but it is prudent to create a system restore point before you change the registry in (1) below
by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab > Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other ‘autorun’ keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and
type the rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.
Ninety-nine per cent of politicians give the rest a bad name. -
Keep getting the error message below every time I start my computer:
Run DLL
There was a problem starting
C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
The specified module could not be found.RunDLL is a legitimate Windows file that executes/loads .dll (Dynamic Link Library) modules which too can be legitimate or sometimes malware related. A RunDLL "Error loading... message usually occurs when the .dll file that was set to run at startup in the registry or as a scheduled task has been deleted. Windows is trying to load this file(s) but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry still remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads.
To resolve this, download AutoRuns and save it to your Desktop from this site:
http://technet.microsoft.com/en-us/sysinternals/bb963902
and follow these Steps
* Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
* Open the folder and double-click on autoruns.exe to launch it.
* Vista/Windows 7/8 users right-click and select Run As Administrator.
* Please be patient as it scans and populates the entries.
* When finished scanning, it will say Ready at the at the bottom and list all entries under the Everything tab.
* In the top menu, click File > Find... and type the file name (backgroundcontainer.dll) related to the error message, then click Find Next.
* Alternatively, you can scroll through the list and look for any entry related to backgroundcontainer.dll and conduit.
* If found, right-click on the entry and choose delete.
* Exit Autoruns and reboot your computer when done.
'''An alternate method to resolve this issue is as follows:'''
1. Go to Start > Control Panel > Administrative Tools.
2. Open Task Scheduler and click on Task Scheduler Library.
3. Look through the list for an entry related to BackgroundContainer.
4. If found, right-click on it and select Delete.
5. Exit all programs and reboot the computer when done.
Also Scan your system with the tools listed in this Article:
[[Troubleshoot Firefox issues caused by malware]] -
{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL
I keep getting this error message.....why? "
{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL
This question was solved.
View Solution.I understand you are getting an error message relating to a runDLL.
What is the product number of the notebook? This can typically be found on a label on the underside of the notebook or in the battery compartment. This label should also contain the serial number.
NOTE: Do NOT provide the serial number.
What OS is the system using? For example, Windows 7 or Windows Vista.
Did this happen after a particular program was installed or uninstalled?
RunDLL errors can be the result of malware. Have you scanned the system for malware using an updated anti-virus program?
Does it happen in a clean boot state? This document details how to enter a clean boot state.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found. -
I get this error from my pc stating
there is a problem starting c:\program files\hp\hp deskjet 2510 series\bin\hpstatusbl.dll
Only after powering up this device the window prompt the above
OS: W8.1
HP 2000 notebook PCAnyone got answers or?
-
"There was a problem starting C:\Windows\System32\LogiLDA.dll"
Message said that specific mode cannot be found.
I can't imagine why you are asking about a specifically Windows problem in an Apple forum, but possibly the comments in this page may assist you.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/specified -module-could-not-be-found-logildadll/9c227c15-d0d6-4e24-946f-ac0dbbbb10d1
If they don't then Google may lead you to an answer: these Apple Discussion Communities are fairly unlikely to. -
"There was a problem starting" MOZILL~1.DLL "nof found"
This shows when I first logon. I use WINDOWS7. Starting happening about two months ago. I always accept new updates from Mozilla. This error comes from WINDOWS7 startup - not when I start Mozilla. I get a WINDOWS7 information box display
Among many things, I do see the adobe mentioned above with unknown listed as the manufacturer. Should I disable it? Remove it? Norton tech help says it is not a virus.
-
Lightroom 5.6 would not open. I only get a flash picture then I get an error message. See below message: [Window Title] Adobe Photoshop Lightroom 64-bit [Main Instruction] Adobe Photoshop Lightroom 64-bit does not work more [Content] there was a problem making the program no longer work properly. The program is closed and there is a notification if a solution is available.
I may have just solved my own problem. Right after posting this I googled bezel lightroom and found this: Flickr: Discussing The word 'bezel' appears in the taskbar. in Adobe Lightroom
I changed the setting in the view menu and now everything appears to be working fine. I cannot explain why it stopped working before because I hadn't made any previous changes to the view options.
Still am curious about the memory usage, though. -
Using Firefox 4 & Windows 7. Everytime I start Firefox from a shortcut to a website it comes up with the following error 'there was a problem sending the command to the program'. The requested website does load after this. with no problems.
If a shortcut is used while Firefox is already open the error does not occur.As reported in earlier replies, the annoyance disappeared after I upgraded to Roboform 7.5.6, from 7.5.4.
Regards, Steve -
Word2007 in windows 7 -There was a problem sending the command to the program!
I just bought my new HP laptop with windows 7 Home premier edition, and then I installed windows office 2007 suite. It's ok if I only open the word without any existing word file. But if I open word with a word file, it says " there was a problem sending
the command to the program". I try this action under safe mode, it's no problem, I can open an existing word file. If I open the winword.exe and use menu "file-open" to open a word file, it's alright. But If I double click a word file, it shows that error.
I tried to change the registry information according to the solution on internet, but it doesn't work. I checked the compatibility mode, it says run in "windows XP sp3", and it is grey, I can't uncheck it.
Anyone got any idea to fix this problem?
Thanks a lot.Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, This sounds like a problem with the file associations in Windows.. If there is any misunderstanding, please feel free to let
me know.
The first thing to check is to make sure that the file extensions are correctly associated with Word.
1.
Click Start > type or copy following command to the Search box
"C:\Program Files\Microsoft Office\Office12\winword.exe" /unregserver
2.
You should then, immediately, use the following command:
"C:\Program Files\Microsoft Office\Office12\winword.exe" /regserver
Re-associate the Word file manually:
Please go to
Start \Control Panel\Programs\Default Programs\Set Associations.
Locate the files .doc, .docm,.docx, .dot, .dotm, check if there are associated with
Microsoft Word. If not, highlight the file and click the
Change Program button. Choose Microsoft Word from the list. If you are unable to see Microsoft Word from the list, click the
Browse button. Browse to the folder: C:\Program Files\Microsoft Office\Office12, and choose
WINWORD.EXE.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
When I Open Mozilla browser it pops up with Do you want to allow program: (x86) mozillafirefox/firefox/exe. I say yes and it pulls up the internet but says there was a problem. Happens everytime i open Mozilla. I've rebooted, opened in safe mode/
Nothing makes it go away.This is a brand new installation of Firefox? I don't know whether there is a troubleshooting article on this scenario.
Can you start up in Firefox's [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]? Hold the Shift key when double-clicking the Firefox program icon to start up in safe mode. You can ignore the checkboxes and just Continue in Safe Mode.
Maybe you are looking for
-
Artist search is broken for MP3 files in iTunes 11?
I am having a first world problem. I am using iTunes 11.01 on 2 Macs - an old 2006 iMac running 10.7.5, and a new MacBook Pro running 10.8.2. Both exhibit the same odd behavior. If I add new MP3 files to iTunes (such as tracks from Amazon), artist na
-
New to servlet http status 404 ::((((
Hello I am writeing my first servlet and have problem to run it using Tomcat. How??? In webapps i made new folder in folder i made web-inf folder in that folder i made classes folder and put web.xml. In adress bar i put localhost:8080/name_folder_in_
-
hey i have so me on my account and my dad wants me to switch over to his iTunes. so would my money transfer or would i just have to buy as much stuff as i can if it doesn't.
-
Transfer of the account --- I lost my e-mail and Internet connection
I wanted to transfer our residential DSL account that was under my husband's name to me. They told me that I could keep my old Verizone-mail account, but when they did the transfer, my e-mail account got disconnected. Moreover, presumably since I hav
-
Hi, I'm using an ejb in a loop with some 1000 calls. It's possible to do this a second client, but the third hangs. It's also not possible to start a simple jsp or servlet on this server during this time.