There was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found

I get error on Windows startup. I have iCloud installed as well as other apple software.
error:
there was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found.

Similar Messages

RUNDLL There was a problem starting Appdata/Roaming/Wisdl.dll The specified module could not be found.

Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard

Every time I start my laptop, this message box pops up.
RUNDLL
There was a problem starting _____ Appdata/Roaming/Wisdl.dll
The specified module could not be found.
Other then being a pain in the neck it does not seem to cause any performance problems. I can not find any internet help in fixing this issue.
Thanks for any help
Richard
Richard
It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions database. I suggest you, firstly, download and
run the free Malwarebytes' Anti-Malware from
http://www.malwarebytes.org/free/ to ensure that you are completely clean. If you then restart the computer and the message is still appearing try one of these, but it is prudent to create a system restore point before you change the registry in (1) below
by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab > Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other ‘autorun’ keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and
type the rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.
Ninety-nine per cent of politicians give the rest a bad name.

C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found."

Recently, when I reboot/start up my Windows 7 HP laptop, an error pops up: "There was a problem starting C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found." How do I fix this?
I have already run the Malwarebytes Anti-Malware program to remove all "threats", "viruses"; etc.

Recently, when I reboot/start up my Windows 7 HP laptop, an error pops up: "There was a problem starting C:\Users\..\AppData\Roaming\lprers.dll; The specified module could not be found." How do I fix this?
I have already run the Malwarebytes Anti-Malware program to remove all "threats", "viruses"; etc.
Very few authentic dll files reside in that folder. It sounds as though you’ve had a recent infection and one of your ‘anti’ programs has removed the malware files, or some of them, but missed the entry in the registry, possibly due to an out-dated definitions
database.
Try one of these, but it is prudent to create a system restore point before you change the registry in (1) below by going to Control Panel > All Control Panel Items > System > System Protection (in the left pane) > System Protection Tab >
Create and make sure you give it a meaningful name.
1. The entry is probably in one of the \Run keys, but as the rascal could be hiding in a number of other keys, it’s quicker to search the whole registry. Open a Run window (Windows Logo key+R), type regedit and press Enter. Click Edit > Find and type the
rogue’s name, put ticks in Keys, Values and Data, then click Find Next. When it’s found in the right pane, right-click it and delete it. There should be only one entry but press F3 to continue searching, just to confirm there are no more.
2. If you’re concerned about making registry changes disable the entry using the system configuration utility, but bear in mind that you’re disabling the entry not deleting it as you would in (1) above. Open a Run window (Windows Logo key+R), type msconfig
and press Enter. Go to the Startup Tab and remove the tick alongside the rogue’s name. Click Apply, OK, etc. and restart the computer. When it restarts, put a tick in ‘Don‘t show this again‘ as you‘re effectively doing a selective start up.

Error message @ Win 7 Pro start up "There was aproblem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."

Error message @ Win 7 Pro start up "There was a problem starting C:\programdata\ofpviaowu.dat - The specified module could not be found."
This error message appears every time I start (boot) my computer and windows starts (Firefox is not running at start up). Firefox 15.01 functions properly otherwise.
This started after I installed the 15.0.1 patch.
I uninstalled and reinstalled Firefox but the problem remains. Google search for "ofpviaowu.dat" came up with "2012-08-29 Firefox Release 15 Startup Crash Report" as the only listing.
Is this a Firefox issue?

hello QAMgr, i'm not aware of this file being a part of firefox & also find it slightly suspicious that there are no more google search hits. maybe this is malware related... could you do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes]?
[[Troubleshoot Firefox issues caused by malware]]

Error message (The Specified module could not be found) how do I fix the problem?

I have Windows 7 and Photoshop Elements 10. I went to install brushes by going to computer->OS(c:)->program files(x86)->adobe->pse10->presets->brushes. After I installed the brushes I could not open PSE, I would just get this error message.How do I fix the problem?

ok, I did not find anything that refered to PSE. I did find a red icon on this. It did not let me paste this in so I am typing it.
Description:
Event filter with query"SELECT*FROM__InstanceModificationEventWITHIN 60 WHERE TargetInstance ISA "Win32_Processor"AND TargetInstance.LoadPercentage>99"could not be reactivatedin namespace"//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
hope this helps
Kaarin

{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL

I keep getting this error message.....why? "
{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL
This question was solved.
View Solution.

I understand you are getting an error message relating to a runDLL.
What is the product number of the notebook? This can typically be found on a label on the underside of the notebook or in the battery compartment. This label should also contain the serial number.
NOTE: Do NOT provide the serial number.
What OS is the system using? For example, Windows 7 or Windows Vista.
Did this happen after a particular program was installed or uninstalled?
RunDLL errors can be the result of malware. Have you scanned the system for malware using an updated anti-virus program?
Does it happen in a clean boot state? This document details how to enter a clean boot state.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Error: A user with the specified SID could not be found in the domain.

Hi All,
I am getting a error as below,
A user with the specified SID could not be found in the domain.
Check the spelling of the account name 'domain\usersAMAccountName' and try again.
-    at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(String strAccountName, SID_NAME_USE[] IntendedAccountType, SID_NAME_USE& sidUse)
   at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(String strAccountName)
   at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(UserProfileApplicationProxy proxy, Guid partitionID, String strAccountName, Boolean isWindowsAccount)
   at Microsoft.Office.Server.UserProfiles.UserProfile.set_SID()
   at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAccountName, String strPreferredName)
   at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateUserProfile(String strAccountName, String strPreferredName)
   at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateUserProfile(String strAccountName)
Any help?
Thanks,
Mohakk

Hi,
Per my understanding, the code should be OK, I have two suggestions as below:
1. Please ensure that the account of that user is valid in your production environment;
2. Try other accounts in the CreateUserProfile() funciton to see if it can work.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

When Starting the computer A small screen appears with the message: RUN DLL Problem stating: \3\LXCGtime.dll..The specific module could not be found

I am an old lady...please e-mail me in understandable talk for me..I do not know too much about computers.
Would like to eliminate this small box when starting up the
computer....HELP

Hello! That DLL may be related to your Lexmark printer. You may need to remove and reinstall the software to fix that issue. Do you still have your disk for it?

Getting error message: "Run DLL" There was a problem starting. C:\users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

Keep getting the error message below every time I start my computer:
Run DLL
There was a problem starting
C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
The specified module could not be found.

RunDLL is a legitimate Windows file that executes/loads .dll (Dynamic Link Library) modules which too can be legitimate or sometimes malware related. A RunDLL "Error loading... message usually occurs when the .dll file that was set to run at startup in the registry or as a scheduled task has been deleted. Windows is trying to load this file(s) but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry still remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads.
To resolve this, download AutoRuns and save it to your Desktop from this site:
http://technet.microsoft.com/en-us/sysinternals/bb963902
and follow these Steps
* Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
* Open the folder and double-click on autoruns.exe to launch it.
* Vista/Windows 7/8 users right-click and select Run As Administrator.
* Please be patient as it scans and populates the entries.
* When finished scanning, it will say Ready at the at the bottom and list all entries under the Everything tab.
* In the top menu, click File > Find... and type the file name (backgroundcontainer.dll) related to the error message, then click Find Next.
* Alternatively, you can scroll through the list and look for any entry related to backgroundcontainer.dll and conduit.
* If found, right-click on the entry and choose delete.
* Exit Autoruns and reboot your computer when done.
'''An alternate method to resolve this issue is as follows:'''
1. Go to Start > Control Panel > Administrative Tools.
2. Open Task Scheduler and click on Task Scheduler Library.
3. Look through the list for an entry related to BackgroundContainer.
4. If found, right-click on it and select Delete.
5. Exit all programs and reboot the computer when done.
Also Scan your system with the tools listed in this Article:
[[Troubleshoot Firefox issues caused by malware]]

Error message at start up - there was a problem starting.....adobe\wnbqc.dll

there was a problem starting.....adobe\wnbqc.dll The specified file could not be found
I recently updated adobe reader and while the program is working fine, I continue to get this pop up when starting my computer. What can I do?

Among many things, I do see the adobe mentioned above with unknown listed as the manufacturer. Should I disable it? Remove it? Norton tech help says it is not a virus.

"There was a problem starting C:\Windows\System32\LogiLDA.dll"

Message said that specific mode cannot be found.

I can't imagine why you are asking about a specifically Windows problem in an Apple forum, but possibly the comments in this page may assist you.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/specified -module-could-not-be-found-logildadll/9c227c15-d0d6-4e24-946f-ac0dbbbb10d1
If they don't then Google may lead you to an answer: these Apple Discussion Communities are fairly unlikely to.

There was a problem starting C:\Program

Just used the Lenovo update gadget.
During reboot I get this message several times.
There was a problem starting C:\Program
HELP!

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

There was a problem starting C:\Program Files (x86)\Think Pad\Utilities\PWMTR64V.dll

Getting this error on every reboot: There was a problem starting C:\Program Files (x86)\Think Pad\Utilities\PWMTR64V.dll Cannot uninstall Lenovo Power Power Management Drive All on Windows 10 64bit. Lenovo Twist. Had installed the latest version (1.67.10.15).

There are 2 separate things here:
1. Lenovo Power Management Driver - this is supported on Windows 10 but needs to be updated to a recent version: http://support.lenovo.com/us/en/downloads/migr-4gxpeg
2. Power Manager - this is not supported on Windows 10 and should be uninstalled.
So have you uninstalled "Power Manager"? The PWMTR64V.dll file comes from Power Manager

There was a problem starting C:\Program Files\HP\HP Deskjet 3050A J611 series\bin\HPStatusBL.dll

The module could not be found.
I am running windows 7 64bit
Uninstalled a printer. Now my computer is complaining that the file is no longer there. It is trying to detect this at startup every time I turn on my computer. How do I get my computer to stop looking for this at startup?

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

There was a problem downloading "A Time for Us / Much Love... / Barratt Waugh". You do not have enough access privileges for this operation.

There was a problem downloading “A Time for Us / Much Love... / Barratt Waugh”. You do not have enough access privileges for this operation.
Please check that the connection to the network is active and try again.
What does this mean?

P.S the error message i got during the download is (err = - 5000)
Thanks in advance

There was a problem starting c:\users\tom\appData\local\Apps\Apple Computer\xvgtv.dll The specified module could not be found

Similar Messages

Maybe you are looking for