There was an error creating your disk image.

FCPX v 10.1 In exporting a completed project to a disk image, the following error message came up: There was an error creating your disk image. VIDEO_INPUT_READ_ERR
It only has occurred on one project (so far).
Has anyone encountered this type of error and found a suitable work around?

If it only happened with that one project, a reasonable guess is that the problem is in the media – either an original clip or a render file. Deleting the render files from the File menu for both project and events would be a good place to start. Turn off BG Rendring and without rendering, see whether a short selection will export as a master file. If it does, try the img again.
Russ

Similar Messages

Adding Picasa account: Android error - There was an error creating your account. Please try again.

I successfully synced with gmail (contacts, mail, etc.), youtube, as well as some other services. I am unable to create the account that accesses Picasa. Each time I try, I enter the email and userid for my account, and I get the same error message "There was an error creating your account. Please try again". I verified that the username and password are correct by signing into Picasa Web directly. A number of other people are experiencing this problem, as can be seen here: http://www.google.com/support/forum/p/Picasa/thread?fid=446b5bd3493325ff0004ad7d643c968c&hl=en
Does anyone know what to do to make this linkage work? I want to be able to use the integrated gallery to access my Picasa pictures.

Oracle forums: current quality level...

Netinstall error: There was an error creating the image

I am using Mac OS X Server 10.4.11 and trying to create a NetInstall Image using the System Image Utility 10.4.11. The .dmg image that I am using is a Mac OS X 10.5.6 version. After completing all the steps in Sys Image Itil it iteventually gives me the following error: There was an error creating the image.
And indicates: error creating image and when I use this NetInstall image the client goes in an eternal reboot.
It is very frusterating since I was able to make a netinstall image using a dmg from a Mac OS X 10.4 version and I was able to do a complete successful Netinstall. Anybody knows why and how to solve this error.

Hi
Mount the .dmg and launch SIU. If it's a valid image it should appear sandwiched between Sources and Workflows. Same process for a client mac connected via firewire or a bootable Installer Disk. Click on it and select NetInstall or NetBoot depending on what you want. You should be presented with Apple's EULA, click Yes/OK and save it to the appropriate folder assuming you've done the necessary in Server Admin. The Admin Manual is actually not too bad:
http://images.apple.com/server/macosx/docs/SystemImaging_and_SW_Update_Adminv10.5.pdf
No need to worry about index numbers either as it does it all for you. It's actually a lot easier than 10.4. Bear in mind if you want to customize the image you have to do it at this stage. You can't go back and edit/customize the nbi once it's created.
You might want to consult the other documentation available for 10.5 Server here:
http://www.apple.com/server/macosx/resources/
Tony

FCP X version 10.1.1. When Sharing to DVD I get the following alert " There was an error burning your discd. Not enough Disk Space in Target Folder" I have 700GB   free. Where is this target folder located? how can I fix this problem? not space prob

Sharing to DVD I get the following alert " There was an error burning your disc. Not enough Disk Space in Target Folder" I have 700GB   free. Where is this target folder located? How can I fix this problem? This is definitely not a space problem.
Since starting with FCP X, there has been tons of issues, now that the product actually works with the exception above, makes it impossible to share the production. Has Apple fixed this problem. is there a knowledge base article on this?
On another note, One reason I have not purchased support on FCP X is because you sold a product that never worked for almost an entire year or more.   Now I can finally finish my project, I cannot share it.....Really. This has to be fixed now, I am loosing money as I typed this.
Regards,
Rob Harris

Just curious, why would repairing permissions, rebooting ( rebooted 2 times already today) or creating a new user possibly fix this.
I cannot create a new user, that is way too much work. I will repair permissions again, I repaired permissions just a few days ago. Then I will reboot, login and turn off App Nap and rerun the Share DVD.
There must be something seriously wrong with the OS if your are suggesting creating another user.   WOW!
Rob H.

"There was an error downloading your purchased music. The disk could no..."

I am trying to download a Video from the new iTunes 6 and I do have an iPod Video, but for some reason everytime I check for purchases to download it, I get this error message: "There was an error downloading your purchased music. The disk could not be read from or written to."
For some reason the Apple Team cannot seem to help me with this, does anyone have any idea what is going wrong? I have purchased the video about 1 1/2 ago and no one has helped me from Apple yet. Please let me know....Thanks so much!
iPod Video 60 GB Windows XP Pro

I had this same issue today. I was able to download songs but not videos. It turned out that the machine that I was downloading on was my work machine and my music storage location was redirected to my company server. The path was
\\Rgafiles-2\bcross$\My Documents\My Music\iTunes\iTunes Music
I suspected that this redirection was an issue so I installed iTunes on another maching and was able to successfully download the song locally. I then copied the .m4v file to my original machine.
Dell Latitude Windows XP Pro

Publish Error: There was an error reading your iDisk quota

While trying publish to my .Mac account, iWeb gives me this message: Publish Error: There was an error reading your iDisk quota.
I published earlier to a group and it worked. I even went to my .Mac/iDisk system preferences on the web and alocated more space for my group site.
No Dice.
I just tried publishing to .Mac without the group.
No dice.
I even tried ellimanting some pages
No Dice.
Hmmm. Frustrating. It worked before, now what?

i followed these steps recommended by mac support and it solved my problem. try it.
We are currently investigating an issue affecting some users who receive an error message while trying to publish a page or site using iWeb. The error states: "There was an error reading your iDisk quota."
Before we proceed with the steps to resolve this issue, we recommend that you back up the iWeb data file. If you already have this file backed up, you may skip to "Resolving the issue" below.
To locate the iWeb data file:
1. From the Finder menu bar, select Go > Go to Folder.
2. Type (or copy and paste) ~/Library/Application Support/iWeb into the field and click Go. You should now see a file named Domain. This file may also appear as Domain.sites, but we will refer to it as Domain throughout these instructions.
If you have the Backup application that is included with .Mac, you can use this to back up the file to your iDisk, CD/DVD, or to an external hard disk.
Note: Though there is an iLife plan in Backup, it does not currently back up the files associated with iWeb. To back up iWeb files, you will need to use either the Custom or Home Folder plan.
If you do not have Backup, you can create a copy of the file and place the copy in a safe place. To duplicate the Domain file, click the file once to highlight it, then select Duplicate from the File menu. This will create a copy of the file named, "Domain copy." Move this file to the desktop or any other safe location.
Resolving the issue:
1. Quit iWeb if it is open.
2. From the Finder menu bar, select Go > Go to Folder.
3. Type (or copy and paste) ~/Library/Application Support/iWeb into the field and click Go. You should now see a file named Domain. This is a Mac OS X package file.
Note: A package is a relatively common type of document in Mac OS X; it is essentially a sealed folder. It contains individual items, but cannot be opened in the same manner as a folder.
4. To open the package, hold down the Control key and click on the Domain package file.
Note: If you have a two-button mouse, this step can be accomplished by right-clicking the Domain package file.
5. Select Show Package Contents from the contextual menu that appears.
6. A new window titled Domain will appear showing the contents of the package. Here you will see one file (or possibly two files) named "assets.<membername>.groups.<groupname>.plist" or "assets.<membername>.plist" where <membername> and <groupname> correspond to your .Mac member name and .Mac Group name.
Note: Your .Mac member name is the first part of your .Mac email address, before "@mac.com."
7. If you have either or both of these files, move them to the trash. Then close the Domain window.
8. Open iWeb and try publishing again.

Very Strange Error Message. "There was an error downloading your.......

There was an error downloading your purchased music. The disk could not be read from or written to.
Does anyone know what this means? I purchased 2 films and cant watch them ;( I wonder if I will be charged??????

I have the same problem, It says error(-50) right? but i tried to buy 3 diffrent songs to see if it would work on any of them but it didnt and i got charged for them.Whenever i go to "advanced" tool bars and click on look up purchased music it tries to repurchase my music but it never works.Can anyone help? = ]
-Riahx
Windows xp Windows XP

Now i get "There was an error reading your iDisk quota."

I have updated to 1.1.1 and while I had issues with publishing to my .Mac account, I never had the problem that was supposed to be SOLVED with this, not CREATED - I now get the infamous "There was an error reading your iDisk quota."
Am I the only one? Any solution? Yes, I have reinstalled, yes, I have created a new site and copied the material. I am out of of options here.

I, too, was getting the fatal "error reading your iDisk quota message" and I tried everything I could think of and every suggestion I could soak up here in these forums.
What finally resolved the issue for me was to open the domain.sites package contents (by shift clicking on the file which is located in ~/Library/Applications Support/iWeb) and to delete not only the typical .plist files, but also the "assets.<membername>.groups.<groupname>.plist" file, and the "assets.<membername>.plist" file.
This recommendation came to me by way of Artie from the .Mac Support Team, to whom I am forever grateful! I hope this works for you, too!
Powerbook G4 Mac OS X (10.4.7)

ITunes Error "There was an error storing your authorization information ...

I cannot play music downloaded from itunes. I have a dell computer with Windows XP Media with 4 users set up. One user has an itunes library that we downloaded music from itunes and got the following messages when trying to access the song.
1. open itunes and click on purchased song
2. the authorize computer pop-up window says this computer is not authorized to play "my doorbell", would you like to authorize it?
3. I enter the name and password and click authorize.
4. itunes tells me you have authorized 1 out of 5 machines.
5. I click ok and another pop-up box tells me "There was an error storing your authorization information on this computer. The required file was not found or has permission errors. Correct the permission problem and try again or deauthorize this computer if the permissions cannot be changed."
I followed the suggestions from a 3/21/06 posting on this matter, to the best of my ability, to no avail.
I've uninstalled itunes, run my disk cleanup utility to remove all unnecessary files (hoping to remove any orphan files) and re-installed itunes which did nothing. the 3/21 posting said to delete the library itl file and imported the library xml file (again). I am not sure what that means so I did not take this step.
Any help would be appreciated.-lpo
Windows XP

Hmmm... I know this issue as been covered before in these post by Katrina and B noir, try searching the post Im looking now to see if I can find it
OK I found it, go here and follow the link Katrina offers http://discussions.apple.com/thread.jspa?messageID=2160752&#2160752
Also make sure "Fast User Switching" is off for the 4 accounts you have on this PC and that the account you have downloaded content on is a adminisrtative one

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

I cannot get any help either. I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning). There appears to be no path to a solution. I have read all the forums and tried about 20 different suggestions all to no avail. Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL. On a macbook pro retina with 10.10.3. This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd. I have yet to be able to print from CS6 any more. This is a show stopper and my patience is wearing thin. And I'm tired of stupid questions like "is your printer powered on?" give me a break. This appears to be an adobe photoshop cs6 problem - as I can print from every other application. Anyone have any ideas? Adobe should have something?... Adobe system info below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Mac OS 10.10.3
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
Built-in memory: 8192 MB
Free memory: 4665 MB
Memory available to Photoshop: 7059 MB
Memory used by Photoshop: 70 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version:
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 2
Display Depth:= 32
Display Bounds:= top: 1072, left: 140, bottom: 1950, right: 1580
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 1050, right: 1680
Video Renderer ID: 16918311
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: 92629107631240972642
Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
KerrysHD, 232.6G, 19.7G free
Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set
Installed components:
   adbeape.framework   adbeape   3.3.8.19346   66.1025012
   AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
   adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
   AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
   AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
   AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
   AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
   AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
   AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
   AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
   AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201
   AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
   AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
   AdobeLinguistic.framework      17206
   AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
   AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
   AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
   AdobePDFSettings.framework   AdobePDFSettings   1.4
   AdobePIP.framework   AdobePIP   6.0.0.1654
   AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
   AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
   AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
   AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
   AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
   ahclient.framework   ahclient   1.7.0.56
   aif_core.framework   AdobeAIF   3.0.00   62.490293
   aif_ocl.framework   AdobeAIF   3.0.00   62.490293
   aif_ogl.framework   AdobeAIF   3.0.00   62.490293
   AlignmentLib.framework   xcode   1.0.0.1
   amtlib.framework   amtlib   6.0.0.75
   boost_date_time.framework   boost_date_time   6.0.0.0
   boost_signals.framework   boost_signals   6.0.0.0
   boost_system.framework   boost_system   6.0.0.0
   boost_threads.framework   boost_threads   6.0.0.0
   Cg.framework   NVIDIA Cg
   CIT.framework   CIT   2.0.5.19287   145486
   data_flow.framework   AdobeAIF   3.0.00   62.490293
   dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0
   dvacore.framework   dvacore   6.0.0.0
   dvamarshal.framework   dvamarshal   6.0.0.0
   dvamediatypes.framework   dvamediatypes   6.0.0.0
   dvaplayer.framework   dvaplayer   6.0.0.0
   dvatransport.framework   dvatransport   6.0.0.0
   dvaunittesting.framework   dvaunittesting   6.0.0.0
   dynamiclink.framework   dynamiclink   6.0.0.0
   FileInfo.framework   FileInfo   66.145433   66.145433
   filter_graph.framework   AdobeAIF   3.0.00   62.490293
   hydra_filters.framework   AdobeAIF   3.0.00   62.490293
   ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
   ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
   image_compiler.framework   AdobeAIF   3.0.00   62.490293
   image_flow.framework   AdobeAIF   3.0.00   62.490293
   image_runtime.framework   AdobeAIF   3.0.00   62.490293
   LogSession.framework   LogSession   2.1.2.1652
   mediacoreif.framework   mediacoreif   6.0.0.0
   PlugPlug.framework   PlugPlug   3.0.0.383
   UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
   wrservices.framework
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing.

Help please! I downloaded mavericks but the install failed. The message stated there was an error with the disk which required repairing. Using disk utility repair disk is not available ( greyed out) and verify disk stops and says disc requires repairing. So the online support page suggests I erase the disc and reinstall then back up from time machine ( I have a recent backup). But when I try to erase the Macintosh HD I get the message volume erase failed with the error couldn't unmount disk.
I'd be very grateful for any help anyone can give me.
I have a macbook pro 17" mid 2009- running on snow leopard 10.6.8 ... I lost the snow leopard disk so I don't know what to do from there ... I tried restarting by clicking SHIFT (safe mode) after the chime comes up, but It doesnt seem to make any difference ... please help !!
thank you sooo much
many many thanks for your hep guys !!

Whenever you install a new version of OS X being installed, the disk is checked just as if you were using Disk Utility checks the disk to see if the disk is damaged. And,, from what you report, your disk is damaged and needs to be replaced. This isn't a fault with Mavericks - your disk may have been failing for years.
It's a very good thing that you've a recent backup as you're going to need it. I would suggest that you evaluate what functionality that you need in a new disk and go shopping at OWC for a new drive - HGST (or any Hitachi), Seagate SSHDs or Toshiba drives are all good. Be sure that you buy an enclosure for the 'new' drive so that you can format it using Disk Utility before installing it into your machine - you can get one of those from OWC as well.
Good luck - call back with any questions...
Clinton

There was an error synchronizing your folder hierarchy. Error : 80041004

I have a brand new install of Windows 7 Ultimate 64-bit. New install of Office 2010 with Hotmail Connector.
I cannot receive emails to Outlook for my Hotmail account. I tried to delete then re-add the Hotmail account in Outlook. No luck.
Sync log:
9:12:12 Synchronizer Version 14.0.5139
9:12:12 Synchronizing Mailbox
'[email protected]'
9:12:12 Synchronizing Hierarchy
9:12:12
   1 folder(s) updated in online store
9:12:12 Synchronizing local changes in folder 'Contacts'
9:12:17
   32 item(s) deleted in online folder
9:12:17 Synchronizing local changes in folder 'Inbox'
9:12:17 Error synchronizing folder
9:12:17
[80041004-0-0-430]
9:12:17 Synchronizing local changes in folder 'Deleted Items'
9:12:17 Error synchronizing folder
9:12:17
[80041004-0-0-430]
9:12:17 Error with Send/Receive.
9:12:17 There was an error synchronizing your folder hierarchy. Error : 80041004.
9:12:17 Synchronizing server changes in folder 'Calendar'
9:12:17 Synchronizing server changes in folder 'Contacts'
9:12:18 Synchronizing server changes in folder 'Drafts'
9:12:18 Synchronizing local changes in folder 'Inbox'
9:12:18 Error synchronizing folder
9:12:18
[80041004-0-0-430]
9:12:18 Synchronizing server changes in folder 'Sent Items'
9:12:18 Synchronizing local changes in folder 'Deleted Items'
9:12:18 Error synchronizing folder
9:12:18
[80041004-0-0-430]
9:12:18 Synchronizing server changes in folder 'Junk E-mail'
9:12:18 Done
9:12:30 Network operation failed
9:12:30
9:12:30
*Request*
9:12:30 09:12:18:0309
9:12:30 POST
9:12:30
http://
9:12:30 sn127ds.mail.services.live.com
9:12:30 /DeltaSync_v2.0.0/Settings.aspx
9:12:30
9:12:30 <?xml version="1.0" encoding="utf-8"?><Settings xmlns="HMSETTINGS:"><ServiceSettings><SafetySchemaVersion>1</SafetySchemaVersion><SafetyLevelRules><GetVersion/></SafetyLevelRules><SafetyActions><GetVersion/></SafetyActions><Properties><Get/></Properties></ServiceSettings><AccountSettings><Get><Options/><Properties/></Get></AccountSettings></Settings>
9:12:30
*Response*
9:12:30 00:00:00:0000
9:12:30
9:12:30

Hi,
Is there any other older version of Outlook present on the computer?
Step 1: Try to remove and re-add the account in Outlook and check.
To remove the account.
Launch MS Outlook 2010 and click the Office button which is located in the top left corner, now under the Info category you will see the Account Settings option, click
the drop down button and choose remove account.
To add the account.
Launch MS Outlook 2010 and click the Office button which is located in the top left corner, now under the Info category you will see the Account Settings option, click the drop down button and choose Add Account.
In the next step, select Email Accounts, enter Your Name, Email Address, and Password and click next.
It will take a couple of minutes to complete the required configuration.
Click Finish and it will start downloading your emails.
Step 2: Create new profile and add the account and check.
To create new profile, follow this link:
http://support.microsoft.com/KB/829918
once you create new profile, add the account in Outlook by following the instructions in step1.
Best Regards,
Nick Wan
=============================
Come back and mark the replies as answers if they help and unmark them if they provide no help.

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

My iphone 4 with 4.3.3 upgrade to 5.1.1,it said to me I should active it,I buy a active-card but it say 'Your request couldn't be processed.We're sorry, but there was an error processing your request. Please try again later.' What's wrong with my iphone

my iphone 4 with 4.3.3 upgrade to 5.1.1,it said to me I should active it,I buy a active-card but it say 'Your request couldn’t be processed.We’re sorry, but there was an error processing your request. Please try again later.' What's wrong with my iphone

It sounds a lot like your phone was jailbroken or hacked to unlock it before you updated.
Was it?

There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
PS CC is up to date
Running OS 10.10.2
HP Printer updated
Help?

Have you printed to this printer from 10.10 before? If so, check your connections.

There was an error creating your disk image.

Similar Messages

Maybe you are looking for