There was an error during initialization. Failed to load an application resource (internal error).

I get this error 4 times when I open reader and can;t repair or uninstall it 11.0.06 (Mircrosoft windows search filter host needs to be closed).
Windows 7

I haven't installed any third-party plugins. However, looking at the list of plugins, I see that there are two copies of ECMAScript: EScript.api dated 12/18/12, and EScript_AVG_RESTORED.api dated 1/21/13. So my bet is this is a side-effect of my anti-virus blocking the JavaScript security hole that was fixed by Java 7 Update 11. I deleted escript*.* from C:\Program Files (x86)\Adobe and the errors have gone away.

Similar Messages

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Failed to load an application resource (internal error) - error message when previewing pdf in program

Hi,
I keep getting this error message when trying to Preview PDF in program "Failed to load an application resource (internal error)". I haven't changed anything in LiveCycle, so not sure why this is happening. Have had this issue for the past few months. I've been working around it, but it's kind of a pain. Would prefer to view forms in program. Suggestions to fix this?
Thank you!
Stacy

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Failed to load an application resource (Internal Error)

Hi,
Running Leopard MAC OS/X 10.5.6 and Adobe Reader 9.1.0. Is anybody going to fix this problem???? Which happens when you try to run Preferences. I won't even mention the fact that I cannot print either. Ooops, I just mentioned it...
Thanks.
Susan

The same problem occurs for me.
The error Failed to load an application resource (internal error) appears when viewing preferences inside the application.
Like wise, when printing a similar error message is shown.
I have uninstalled the application, all adobe products on the system, removed application support files, preferences, PDF preferences and reinstalled. The problem still exists.
I installed the same version (v9.1.0) on another mac that had never had Acrobat installed before and the problem does not exist. I am able to view preferences and print.
Both are intel based Macs running 10.5.6.
Given that it works on one mac and not the other, what would be causing this?
Also is there an uninstall tool for Adobe Acrobat Mac from Adobe?

Failed to load an application resource (internal error) win XP

I am
trying to correct the problem of not being able to open .pdf files from internet websites.
This is the error that I get when I go to edit
- preferences in adobe reader. Anyone have any advise? Greatly appreciated. Windows XP

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Reader 10.1 "Failed to load an application resource"

Hi
I upgraded from Reader X (10) to 10.1. Since then every time I start it, whether as a standalone or plug-in, I get one or more instances of an error message which says "There was an error during initialization. Failed to load an application resource (internal error)." I also note that there is no plug-ins menu.
This is getting annoying, to say the least. I am running Windows Vista SP2. Googling produced nothing relevant.
Does anyone have any ideas?
Thanks
Luke

Thanks.
Both. In Vista Add/Remove Programs gives a "Change" rather than a repair option but it runs the repair either way, says everything is ok, but it isn't.
Screenshots below
Luke

There was a problem during installation of blackberry messenger. Please try again

There was a problem during installation of blackberry messenger ( any application). Please try again, this is the message i get anytime i try to download or upgrade any application on my blackberry bold 9870. pls i need your help
Thanks
bellokeshi

bellokeshi wrote:
Blackberry appworld version: 4.0.0.63
OK, that is almost the latest version... .65 is later.
You can upgrade your AppWorld from using your BlackBerry browser to go to www.blackberry.com/appworld
After you upgrade, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
IF then you don't see or can't find the AppWorld icon, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

?¿There was an error during muxing preparation (project conversion).?¿

*There was an error during muxing preparation (project conversion).*
can anyone elaborate on this?

Same thing just happened to me. I re-output my quicktime movie with chapter markers turned off. You probably have a chapter mark set too close to the beginning, end or near a transition. I didn't have time to futz with the markers so I just turned them off.
Muxing stands for multiplexing. It's when iDVD takes all the data layers, video, audio etc. and multiplexes them into one data stream. When you play the dvd in your player that one data stream is DE-Muxed back into the original layers.
When you give iDVD a quicktime movie with chapter marks it encodes those chapters as separate mpeg 2 clips. When it muxes it combines everything into one stream. If there are any inconsistencies then muxing fails.
DVD Studio pro gives a more detailed log when muxing fails. It usually involves problems with chapter marks.
Message was edited by: Daniel Nocera

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

I had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.

i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe

Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe reader installation error. null. tried using adobe cleaning tool. using XP sp3. seems that adobe 11 is not completely uninstalling. this is because when adobe reader 11 is removed from add/remove program. when pc is rebooted, adobe reader 11 entry comes back but it is like false entry as no size given. please help to succesfully install Adobe Reader 11. also tried:
1. uninstalled, rebooted, reinstalled 2. installed from different locations 3. removed adobe key from
local machine and tried to install

Seriously, I do not understand what is going on - I have never seen this before!
The MSI installers are usually used in corporate environments to roll out installs on multiple machines. However, you can use it like a normal (EXE) installer; it will just go through fewer steps than the EXE. Not sure if it will improve the situation, but it's worth a try.
Another thing to try is to uninstall these remaining entries using Microsoft Fixit: http://support.microsoft.com/mats/Program_Install_and_Uninstall - also no guarantee, but also worth trying.

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

There was an error during initialization. Failed to load an application resource (internal error).

Similar Messages

Maybe you are looking for