There was an error during the save process

Hi All,
When I try to save the data in a form, I got the following error but data was saved. Remaing forms are saving the data without any error.
There was an error during the save process
I found the log
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:30 PM]: Rebind at: Sat Jul 04 16:24:30 GMT+03:00 2009
[Jul 4, 2009 4:25:30 PM]: Rebind at: Sat Jul 04 16:25:30 GMT+03:00 2009
[Jul 4, 2009 4:26:30 PM]: Rebind at: Sat Jul 04 16:26:30 GMT+03:00 2009
[Jul 4, 2009 4:27:30 PM]: Rebind at: Sat Jul 04 16:27:30 GMT+03:00 2009
Thanks & regards,
Sravan Kumar.

Hi John,
I customized the standerd Transfer BR according to my requirement. And I am using the customized form.
I tried to change the Action in (Action is smart list) in the form, it is getting saved but with the error There was an error during the save process.
My requirement is Action updated through BR only. But it is not updating. Previously the same BR worked fine.
Is there any relationship between the error and the Action was not updating?
Thanks & Regards,
Sravan Kumar.
Edited by: Kumar1899 on Jul 6, 2009 6:29 AM

Similar Messages

Error during the save process with Planning data form

Hi,
When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.

Hi,
I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
Cheers
John
http://john-goodwin.blogspot.com/

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting". How do I fix it so that it'll burn?

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'.

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

HI
in sharepoint 2013 WFE servers event viewer i receive following error many times
Log Name: Application
Source: Microsoft-Windows-IIS-W3SVC-WP
Date: 4/14/2015 2:23:56 PM
Event ID: 2303
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: TSharepint2013.test.com
Description:
There was an error during processing of the managed application service auto-start for application pool: 'SecurityTokenServiceApplicationPool'. Some application services may not have been processed correctly. Please check the configuration for application
service auto-start for the application(s) assigned to this application pool. The data field contains the error code.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
<EventID Qualifiers="32768">2303</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-04-14T11:23:56.000000000Z" />
<EventRecordID>183840</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security />
</System>
<EventData>
<Data Name="ApplicationPool">SecurityTokenServiceApplicationPool</Data>
<Binary>02000780</Binary>
</EventData>
</Event>
adil

When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.

When saving iDVD to disk image the following message appears: "Error during rendering/codification. There was an error during rendering/codification of menus/slide presentation. The recording process was canceled.
What am I doing wrong?

Read and answer the questions posted by Bengt Wärleby in this thread: Cant burn my idvd project to...: Apple Support Communities
OT

HT1645 whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

whether i use a DL DVD or just a DVD R, it tells me there was an error during multiplexing. I have tried changing every setting, best performance, professional quality, etc. and still get the same error message every time i try to burn to dvd.

Welcome to the forums.
Looks like that error message does refer to encoding (see http://support.apple.com/kb/HT1645) but a problem could be that your video has to be reloaded into iDVD if you started the encoding process and then switched settings. You could start a new iDVD project, or try deleting encoded assets.
Let's start from the beginning -- what length of video are you trying to fit on the DVD? (this will indicate what encoding options you have). Double layer DVDs can be finicky and are used for video more than 2 hrs long.
Use good quality media -- Verbatim is often recommended around here, and I've used Sony DVD-R with good results.
For a detailed treatise, see: https://discussions.apple.com/thread/3926901?tstart=0
John

I need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul

i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009".
and after they said "we could not complete your request. There was an error in the App Store. Please try again later (null)".
COMPUTER DETAILS: MacBook Pro 13-inch, Mid 2012 OS X Version 10.9.5; Processor 2,5GHz Intel Core i5; Memory 4 Go 1600 MHz DDR3.
Thanks beforehand!!!

Error
what is error code 1009?

HT204406 Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process

Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process (Gathering information about your Itunes library)?

JohnCullison wrote:
For the last few weeks, the iTunes store has been displayed with empty graphic rectangles (with a blue box containing a white question mark centered in the rectangles), bits of text, and some buttons. The page extends quite a ways, including what I assume would be all the links to all the music...
If all you are trying to do is buy music, you can easily buy MP3s at any online music download store (e.g. amazon.com) and add them to your iTunes library.

My iDVD always says "it was an error during the movie encording" and it suddenly stops burning idk what to do!

Ok so i'm trying to burn a short 10-min-long film to a DVD via iDVD.... i've worked with it before and never had any trouble.
But i havent used it for 3 years now probably, and as i made the DVD menu and sub-menus for this project i worked normally
as i always did, it was easy and everything worked just fine.
The only difference this time is when i click "burn" it starts processing the menus but when it's done, instead of going to the next step which is
processing the slideshows, it automatically stops the burning and it says "there was an error during movie encording" idk why it always comes out,
what i'm doing wrongor if it just doesnt work anymore :S it also opens a new mini window that says "you have insterted a blank DVD.
Choose an action: (open finder) (open iDVD) (open iTunes) etc" so this tells me it's reading it...
i've picked all the options and it still doesnt work with any of those at this same point. I've also tried changing the preferences, the screen mode,
the video quality, EVERYTHING! nothing works! DX
anyone knows how to fix this?
it'd be truely appreciated!!!
Yours Truely, DANIELLA.

So today, I deleted that original file (this gave me the ~18.5 GB free) off my internal HD and tried to burn the project.
So the DV file iMovie is using is on the external again? If so I assume iDVD knows that...
Have you tried making a disk image?
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
You could go to the iDVD 5 group and search the group for that error code. There was plenty of those there. Not much here.

Netinstall error: There was an error creating the image

I am using Mac OS X Server 10.4.11 and trying to create a NetInstall Image using the System Image Utility 10.4.11. The .dmg image that I am using is a Mac OS X 10.5.6 version. After completing all the steps in Sys Image Itil it iteventually gives me the following error: There was an error creating the image.
And indicates: error creating image and when I use this NetInstall image the client goes in an eternal reboot.
It is very frusterating since I was able to make a netinstall image using a dmg from a Mac OS X 10.4 version and I was able to do a complete successful Netinstall. Anybody knows why and how to solve this error.

Hi
Mount the .dmg and launch SIU. If it's a valid image it should appear sandwiched between Sources and Workflows. Same process for a client mac connected via firewire or a bootable Installer Disk. Click on it and select NetInstall or NetBoot depending on what you want. You should be presented with Apple's EULA, click Yes/OK and save it to the appropriate folder assuming you've done the necessary in Server Admin. The Admin Manual is actually not too bad:
http://images.apple.com/server/macosx/docs/SystemImaging_and_SW_Update_Adminv10.5.pdf
No need to worry about index numbers either as it does it all for you. It's actually a lot easier than 10.4. Bear in mind if you want to customize the image you have to do it at this stage. You can't go back and edit/customize the nbi once it's created.
You might want to consult the other documentation available for 10.5 Server here:
http://www.apple.com/server/macosx/resources/
Tony

GRRR! "There was an error during movie encoding"

I can't seem to compile and burn a DVD to save my life with iDVD. I have a video that I created and exported using iMovie and two shorter ones created in Photoshop CS6 — all three are the same encoding: 1920 x 1080, H.264, AAC, Color profile: HD (1-1-1). The one exported with iMovie is a .mov file and the other two are .mp4 files — none of them with any sort of copyright/permissions protection on them.
iDVD previews them all just fine, but EVERY SINGLE TIME I go to try and burn a DVD it gives me the above error message, "Encoding Video: There was an error during movie encoding" which tells me absolutely nothing. This might not stress me out so much if it were just a personal project, but rather it's for a friend's wedding that I shot and iDVD's failure to do a basic thing like encode video is really ticking me off.
I tried to localize the issue by trying to burn just the .mov file and then just one of the .m4v files — and have found it chokes on m4v files. Why is this so??
If I'm doing something wrong, the error message should give me a little more feedback than just "oh there was an error."

Hi
We are only Users - trying to help other users - rarely Apple or program developer drop in for a look so I would send feedback here
• www.apple.com/feedback/idvd.html
BUT as Apple discarded the product in all - can not even be bought any more - any further development is most certainly never to be.
But what You feed iDVD matters and - You and so many more has the idea that .mov or .m4v etc are movie formats/codecs - they are not - only containers - so to figure out what You give iDVD You need to find what's in them. I do like this
• Open them in QuickTime Player
• here open Inspector [cmd+I]
• read - Video Format/Codec: nnnnnnn
What does it say and in what frame rate (fps) ?
iDVD can only do good (very good) DVDs when feed
25 or 29.97 fps
interlaced SD-Video
So by feeding it 1920x1080 24fps - to make a NTSC (29.97fps) DVD - result will be very BAD. Conversion is of need. I use following programs to do this
• Frame Rate - JES_Deinterlacer
• MPEG Streamclip
• QuickTime 7.6 + Pro-upgrade
Yours Bengt W

Error while saving Adobrforms: There was a error reading the document(26)

Hello,
Am not able to save the pdf form.
Error : "The document could not be saved.There was a error reading the document(26)."
Can anyone please tell me why i am getting this error.
Thanks,
satheesh

Hi Satheesh,
Can you give more details about your scenario..
Regards,
Ravi

I cannot to download from the mac app store (There was an error in the App Store. Please try again later. (20))

I cannot to download from the mac app store (There was an error in the App Store. Please try again later. (20))
I traied to remove cookies and still don't working.

Regretably, none of the above solutions has resolved this problem for me.
Whenever I try to perform updates (in my case, Xcode and iPhoto both want to update), I receive the following error:
An error occurred during purchase.
(of course, I am not trying to purchase anything, it is a free update)
If I press Retry, the above repeats until I press Cancel, then I see:
We could not complete your request.
There was an error in the App Store. Please try again later. (20)
I have been "trying again later" for three weeks now, with no resolution in sight.

I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later." and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

Hello, constance132.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I could recommend when receiving error -50.
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista:  \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7:  \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP:  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Cheers,
Jason H.

"There was an error opening the pdf. File cannot be found" Message

I am creating an Adobe PDF file using Save As in FrameMaker 7.0. (I have Acrobat Standard 8). The PDF creates fine, but I used to get the pdf to immediately/automatically open. Now I get the message "There was an error opening the pdf..."
I did select the option to automatically open the pdf in File > Preferences but it doesnt do it, Any suggestions?
Thanks.
Beth

Hi John Paul,
Do you get any error code associated with this error message.
Does this happen with other pdf files too or with that specific pdf?
In case it happens with that specific pdf, please get another copy of that pdf because the current copy might have got corrupted.
Regards,
Rahul Tyagi

There was an error during the save process

Similar Messages

Maybe you are looking for