There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

Hi
While trying to perform the operation 'Annul All Below' in DRM 11.1.2.1, I received the following error: There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.
Has anyone seen this error before, and does anyone know what the fix is?
Thanks,

Just giving my view on this.
When you try to restore a Version backup file, you get this error.
This is a known defect. The problem is caused by missing values in properties like AddedOn, AddedBy, which may occur when a version is copied with 'Clear Changed Properties' selected.
this is a known bug
but to workaround - Blend the affected version into a new, empty version, which will populate the 'ChangedOn' properties. You can then back up this version and it will restore.
Thanks,
~KKT~

Similar Messages

TS3694 I have a brand new iPad 4. I plugged in and it told me that there was new software available. I went to update it and now it tells me "unknown error 1656". Now the pad is in permanent recovery mode and I can't do anything with it. Any info?

I have a brand new iPad 4. I plugged in and it told me that there was new software available. I went to update it and now it tells me "unknown error 1656". Now the pad is in permanent recovery mode and I can't do anything with it. Any info?

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

I am importing videos from my canon sl1 to my macbook when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item 'MVI_1040

I am importing videos from my canon sl1 to my macbook air when i use iphoto is says "iPhoto cannot import your photos because there was a problem downloading an image." and when i use image capture it says "An error occured while importing. The item ‘MVI_1040'' Thanks in advance

Can you access the images on the phone with Image Capture (in the Applications Folder) ?

Lost my iphone dont know my IMEI number tried to get it from ituens about and clicking the Control key but there is one imei and i have 2 phones backed up on my ituens is there a way to know which one is the right one?

Lost my iphone dont know my IMEI number tried to get it from itunesby clicking about and the Control key but there is one imei and i have 2 phones backed up on my itunes is there a way to know which one is the right one? and is there another way to find my phone and its offline so i cant use find my phone! Help

Other ways? Check the box? Call your carrier?

HT3823 I looked at an album and at the bottom there was a digital booklet and it said "album only" so I bought the album, but then I didn't get the booklet. What do I do? (iPad 2)

I looked at an album and at the bottom there was a digital booklet and it said "album only" so I bought the album, but then I didn't get the booklet. What do I do? (iPad 2)

Hi OverratedBacon,
Thanks for using Apple Support Communities. I would first try downloading the songs from your past purchases by following the appropriate steps here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you're still unable to receive your preorder, you may want to report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari

Error trying to get LiveCycle ES up and running with JBoss/SQL Server

I am having an error trying to get LiveCycle ES Trial up and running with JBOSS and SQL Server. The LiveCycle ES and JBOSS engines are running on Windows Server 2003 SP #2 under VMWare Server with 2 vCPUs/1 GB vRAM. The SQL Server database is SQL 2005 x86-64 with SP #2 on a separate server. I have carefully followed all of the instructions for setting up jboss, modifying all of the appropriate XML files, downloading the SQL JDBC drivers and putting it in the %JBOSS_HOME%\server\all\lib directory, etc. I tried both the SQL JDBC 1.1 and 1.2 drivers and they both fail. The error I get is on startup of jboss using cmd /c start /low run.bat -c all (and yes I also just tried run.bat -c all) it runs along file until it gets here 2008-06-18 16:00:03,123 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=IDP_DS' to JNDI name 'java:IDP_DS' 2008-06-18 16:00:03,123 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=EDC_DS' to JNDI name 'java:EDC_DS' 2008-06-18 16:00:03,373 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=JmsXA' to JNDI name 'java:JmsXA' 2008-06-18 16:00:03,373 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=adobe_JmsQueueXA' to JNDI name 'java:adobe_JmsQueueXA' 2008-06-18 16:00:03,389 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=ConnectionFactoryBinding,name=adobe_JmsTopicXA' to JNDI name 'java:adobe_JmsTopicXA' 2008-06-18 16:00:03,482 INFO [org.jboss.resource.connectionmanager.ConnectionFactoryBindingService] Bound ConnectionManager 'jboss.jca:service=DataSourceBinding,name=DefaultDS' to JNDI name 'java:DefaultDS' 2008-06-18 16:00:03,514 WARN [org.jboss.resource.connectionmanager.JBossManagedConnectionPool] Throwable while attempting to get a new connection: null org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Failed to register driver for: com.microsoft.jdbc.sqlserver.SQLServerDriver; - nested throwable: (java.lang.ClassNotFoundException: No ClassLoaders found for: com.microsoft.jdbc.sqlserver.SQLServerDriver)) at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnecti on(LocalManagedConnectionFactory.java:164) [ lots more error scrolls ] this repeats multiple times I can see that it does acknowledge that I put the sqljdbc.jar file in the appropriate directory from the boot.log <snip> 15:59:44,856 DEBUG [SARDeployer] deployed classes for file:/C:/jboss/server/all/lib/sqljdbc.jar <snip> please help!

APJ We ran into many issues setting up a very similar environment. In the end we had to use a specially configured JBoss, supplied by Adobe, to make a connection with the SQL database. Since you have SQL w/ SP2 on it, you will need the 1.2 driver for sure, but you may want to talk to Adobe support about obtaining the version of JBoss they supplied us with. The Adobe Support Reference Number is: 1-52422366. Even with the alternate JBoss we had to perform the following steps to get the configuration right: 1. Install Livecycle from the installation DVD. Follow the instructions for installing LiveCycle supplied by Adobe, including all pre-installation instructions. Make sure NT service is installed with parameters, and dont run Configuration Manager. 2. Rename %LIVECYCLE_INSTALL%\jboss to %LIVECYCLE_INSTALL%\jboss_orig 3. Extract the zipped new, good instance of JBoss (supplied by Adobe) to the %LIVECYCLE_INSTALL%\ folder 4. Go to the %LiveCycle_Home%\deploy folder and make a copy of the file adobeimport_SQLServer.jar file. Rename the copy of the file to aadobeimport_SQLServer.jar. There seems to be a bug in configuration manager that looks for a file with the extra a appended to the beginning of the file name, where that file normally isnt there. Make sure that the adobeimport_SQLServer.jar file is still in this folder as well. 5. Edit the data source file (%JBOSS_HOME%\server\all\deploy\ adobe-ds.xml) to point to the correct database for the LiveCycle Server. a. Update the <connection-url>, <user-name>, and <password> tags with the correct database connection information. b. If BAM is to be used on the server (this should be done on the Production server) then delete both lines that state Remove this line, if BAM is used. 6. Go to the login configuration file (%JBOSS_HOME%\server\all\conf\login-config.xml), and edit the section labeled <application-policy name = "MSSQLDbRealm">. a. Change the Principal, UserName, and Password options to point to the correct database. These will be the same as what was changed in the adobe-ds.xml file from the step above. 7. Edit the system variables on the server. Add to the Path variable %JBOSS_HOME%\bin, and add the variable JBOSS_HOME with the path to the JBoss folder on the server. (D:\Adobe\LiveCycle8\jboss for example) 8. From windows services start the JBoss for Adobe LiveCycle ES v8.0 service. Review the JBoss server log (%JBOSS_HOME%\server\all\log\server.log) to verify that JBoss starts without throwing any exception errors (A document timeout exception is the only acceptable exception for starting the service). 9. Run the LiveCycle Configuration Manager (%LiveCycle_Home%\ConfigurationManager\bin\ConfigurationManager.bat). a. Select to Not Upgrade fromLiveCycle 7.x. b. Check all boxes on the Solution Component Selection screen. c. For the Task Selection screen check all the boxes except for the Import LiveCycle ES Samples into LiveCycle ES if on the production server. d. Run through the rest of the configuration manager interface to setup the LiveCycle server with the new application server. Follow the steps supplied by Adobe for this. 10. Once configuration manager has completed, reboot the server, and verify that JBoss starts up again without any exceptions or errors (again a document timeout exception is an acceptable exception. Look at the server log to verify this (%JBOSS_HOME%\server\all\log\server.log)).

Getting "The remote server returned an error 503 server unavailable" in azure web jobs

I have created one web
job - on demand schedule under azure web site. This web jobs contains .execmd(i.e.)
Console Application.
I am retrieving the data from SQL Azure database and uploaded the data in sharepoint online lists. (i.e.)I have uploaded the data to several(7) lists in each subsites. I have 3 subsites.
I am getting this error "The remote server returned an error 503 server unavailable", while uploaded the data into lists.
Full Error Message:
Message - The remote server returned an error 503 server unavailable.
StackTrace - at System.Net.HttpWebRequest.GetResponse()
> cc525c: INFO] at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute()
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientRequest.ExecuteQueryToServer(ChunkStringBuilder sb)
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientRequest.ExecuteQuery()
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientRuntimeContext.ExecuteQuery()
> cc525c: INFO] at Microsoft.SharePoint.Client.ClientContext.ExecuteQuery()
This is not occur every time. Some time i didn't get any error data successfully uploaded in share point online list.
Totally 4 hours taken uploaded the data into list for completed all 3 subsites.
If anyone know how to resolve this.
Thanks,
A.Ramu

Hi,
Per my understanding, there is an issue when uploading data from SQL Azure database to a SharePoint list in Online environment.
For narrowing down the issue, I suggest you create a Console Application in Visual Studio without accessing the SQL Azure database and upload some sample data to the same SharePoint
list to see if the issue still occurs intermittently.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Form Based Authentication in SharePoint 2013: Getting The remote server returned an error: (500) Internal Server Error

Hi
I configured forms based authentication mode in Sharepoint 2013 site. When i tried to log in with windows authentication prompt it throws the following error
The remote server returned an error: (500) Internal Server Error
[WebException: The remote server returned an error: (500) Internal Server Error.] System.Net.HttpWebRequest.GetResponse() +8548300 System.ServiceModel.Channels.HttpChannelRequest.WaitForReply(TimeSpan timeout) +111 [ProtocolException:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first
1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
How to fix this issue?
Regards,
Siva

Did you create a new web application or modify an existing web application?
I would start by checking the ULS logs, maybe there is an incorrect setting within one of the web.config files, or SQL permissions.
Also, as suggested above, check application pools are running.
This blog post is a great guide for setting up FBA, check it through to make sure you haven't missed any steps:
http://blogs.technet.com/b/ptsblog/archive/2013/09/20/configuring-sharepoint-2013-forms-based-authentication-with-sqlmembershipprovider.aspx

MERGE error : unable to get a stable set of rows in the source tables

Hi,
For an update, the following MERGE statement throws the error-unable to get a stable set of rows in the source tables:
MERGE INTO table2t INT
USING (SELECT DISTINCT NULL bdl_inst_id,.......
FROM table1 ftp
WHERE ftp.gld_business_date = g_business_date
AND ftp.underlying_instrument_id IS NOT NULL) ui
ON ( ( INT.inst_id = ui.inst_id
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.ric = ui.ric
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.isin = ui.isin
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.sedol = ui.sedol
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
OR ( INT.cusip = ui.cusip
AND g_business_date BETWEEN INT.valid_from_date
AND INT.valid_to_date
WHEN MATCHED THEN
UPDATE
SET INT.inst_id = ui.inst_id, INT.ric = ui.ric
WHEN NOT MATCHED THEN
INSERT (inst_key, ......)
VALUES (inst_key, ......);
To determine the existence of a record, first check if any match is found on the first key, if not then search for the second key and so on.
Now two records with differenct first key, i.e. inst_id, can have the same ric(second key). On a rerun, with the target table already populated, the code fails. The reason is it finds duplicate entries for the second key.
Any suggestions on how to make this work?
Thanks in advance.
Annie

Annie
You've spotted the problem (that two records have the same RIC). MERGE doesn't allow that; each record in the data being updated is only allowed to be updated once.
Is there a PK column (or columns) that we can rely on?
What you can try is to outer join FTP to INT. Something like:
MERGE INTO INT int1
USING (
    select columns_you_need
    from (
        select ftp.columns -- whatever they are
               , int2.columns
               , row_number() over (partition by int2.pk_columns order by int2.somecolumns) as rn
        from   ftp
        left join int int2
        on (the condition you used in your query)
    where rn=1
) s
WHEN MATCHED THEN UPDATE ...
WHEN NOT MATCHED THEN INSERT ...So if you can restrict the driving query so that only the first one of the possible updates actually gets presented to the MERGE operation, you might be in with a chance :-)
And of course this error is nothing to do with any triggers.
HTH
Regards Nigel

Hi, I recently received an email which I believed to be from my bank but it turns out it was from someone trying to hack my bank account. I accessed the email on my phone and I wanted to know if I need to restore my iphone back to default settings?

Hi, I recently received an email which I believed to be from my bank but it turns out it was from someone trying to hack my bank account. I accessed the email on my phone and I wanted to know if I need to restore my iphone back to default settings? I am a bit worried about losing everything on my phone if I do this but at the same time I don't want them to get any other information. Any ideas?

Did you log in with your bank account via the link included with this email?
If not, you have nothing to worry about.
Accessing or viewing the email alone can't provide your bank account info or the log in for your bank account.

I am so angry - there has to be a misundering. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone

I am so angry - there has to be a misunderstanding. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone number for security and the dingbat girl who I'm emailing send me a link that does not work. And I am extremely frustrated. Please help. I need a phone # to contact security.

Contact Apple Support here:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

2nd day w/my ipad2. Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started." I get music symbol when click ipod

2nd day w/my ipad2. Have spent 5 hours trying to get my ipod music to play on the ipad..it has been downloaded and synced. When I click on itunes , I get a window that says "Apple mobile device service is not started." I get music symbol when click ipod.

http://support.apple.com/kb/ts1567

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

Hi Djmontanalv,
Please go through the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Regards,
Anand

There was an error trying to get the status of the job. 1: The server returned an error processing CloseJob: Stack empty.

Similar Messages

Maybe you are looking for