Theres a Boot Camp partition, but it's not bootable

Hi, so I made a boot camp partition and then my computer restarted, and opened the windows installer. Me being stupid, I realised that I had forgot to put some drivers onto my USB. So, I went back to OSX (by quitting out of the installer and pressing OPTION while booting up) to get those pesky files.
Then I went into System Preferences to boot of Boot Camp, and Lo Behold! No bootable Bootcamp. It only shows my original hard drive and my Windows CD.
I am using OSX Mavericks and a early 2010 MBP.
Proof of my partition:
Proof of no bootable partition:
Note: Same thing happens when I restart my computer while holding OPTION, not bootcamp.

first one setup the partition for bootcamp then one install windows on the partition
did you install windows from dvd or usb stick ?
if not then you will not be able to boot from the bootcamp partition as it would not have an operating system installed on it

Similar Messages

  • Boot Camp partition moved to external:"No bootable device found"

    I have just installed a new SSD, moved my old OSX partition to the new drive and am currently using the old hdd in an enclosure as an external hard drive.
    I can access all my files on my old OSX partition and my bootcamp partition when connected to my laptop. However, when i try to boot from my old bootcamp partition i get the "No bootable device found -- insert boot disk and press any key" message. That is when i boot from Startup Disk and target the bootcamp partion.
    When restarting my computer with the external harddrive connected and pressing the option key i only get "SSD" and "Recovery" as options, it does not recognize the external harddrive as a startup option at all.
    Is there anything i can do to use my old boot camp partition again? It worked perfectly fine before being external to the computer.
    My computer is a 2011 mbp with Mavericks, my boot camp patition is installed with windows 7.

    Microsoft requires that the partition for Windows be on an internal disk. It will not see an external drive as bootable.
    Allan

  • Boot Camp partition missing, VMware Fusion not working

    I'm using OS 10.10.2
    Windows 7
    Fusion 7.1.0
    Winclone 3.7
    I've been sharing a boot camp partition with Fusion for a while. I don't know when it happened but when I recently tried to log in using Boot Camp, the partition didn't show up in Apple's start up screen or in the Finder even though I could see it in Fusion.
    I needed to expand the partition so I backed it up with Winclone changed the partition from 40 to 75 gig and reinstalled the Winclone file.
    Now I'm unable to boot into Windows using Fusion and I still can't see the Boot Camp partition when I start up.
    Fusion said
    so I did.
    The new virtual machine said
    and
    Now it wants me to upgrade Windows.
    Please help.

    I saw R.NTFS so I started on the Windows DVD and ran Repair.
    Unfortunately I still can't get Boot Camp to do anything beside give me a flashing cursor on a black screen.
    What else can I do?
    This is from the terminal screen after I did everything above. It still says R.NTFS
    Last login: Sat Mar 14 01:30:47 on console
    Bruces-MPB:~ bruce$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
    Password:
    00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
    00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 58 c8 6f  |........?....X.o|
    00000020  00 00 00 00 80 00 80 00  ff 0f a8 04 00 00 00 00  |................|
    00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
    00000040  f6 00 00 00 01 00 00 00  c9 3e 83 34 55 83 34 4e  |.........>.4U.4N|
    00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
    00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
    00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
    00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
    00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
    000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
    000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
    000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
    000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
    000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
    000000f0  68 07 bb 16 68 70 0e 16  68 09 00 66 53 66 53 66  |h...hp..h..fSfSf|
    00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
    00000110  28 10 b9 d8 0f fc f3 aa  e9 5f 01 90 90 66 60 1e  |(........_...f`.|
    00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
    00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
    00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
    00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
    00000160  0e 16 00 75 bc 07 1f 66  61 c3 a0 f8 01 e8 09 00  |...u...fa.......|
    00000170  a0 fb 01 e8 03 00 f4 eb  fd b4 01 8b f0 ac 3c 00  |..............<.|
    00000180  74 09 b4 0e bb 07 00 cd  10 eb f2 c3 0d 0a 41 20  |t.............A |
    00000190  64 69 73 6b 20 72 65 61  64 20 65 72 72 6f 72 20  |disk read error |
    000001a0  6f 63 63 75 72 72 65 64  00 0d 0a 42 4f 4f 54 4d  |occurred...BOOTM|
    000001b0  47 52 20 69 73 20 6d 69  73 73 69 6e 67 00 0d 0a  |GR is missing...|
    000001c0  42 4f 4f 54 4d 47 52 20  69 73 20 63 6f 6d 70 72  |BOOTMGR is compr|
    000001d0  65 73 73 65 64 00 0d 0a  50 72 65 73 73 20 43 74  |essed...Press Ct|
    000001e0  72 6c 2b 41 6c 74 2b 44  65 6c 20 74 6f 20 72 65  |rl+Alt+Del to re|
    000001f0  73 74 61 72 74 0d 0a 00  8c a9 be d6 00 00 55 aa  |start.........U.|
    00000200
    Bruces-MPB:~ bruce$

  • Uninstalled Boot Camp partition but did not recover full hard drive space

    I used Boot Camp Assistant to uninstall my Windows 7 partition, but in the middle of the uninstall we had a power outage. When I restarted the computer, the Boot Camp drive image on my desktop was gone, but when I checked the storage, it only showed 697GB storage, not the full 1TB that should be there. When I checked the Boot Camp Assistant again, the only option it gave me was to download the software or install Windows 7 or later. I probably need to do a system restore (I do have my system backed up with Time Machine on an external drive) but if there's another way to get back that 300GB space, I'd appreciate some guidance.

    Yosemite with CoreStorage adds to complications.
    Can you post the output of the following Terminal commands. For "sudo" commands, enter your password, and it will not be echoed back to you.
    diskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo fdisk /dev/disk0

  • How to clone Boot Camp partition when Winclone does not work

    The hard drive in my MacBook Pro is failing. It has 2 partions, one for Apple and the other is a Bootcamp with Windows 7.
    I tried repairing it with Disk Utility, which did not work. I also ran DiskWarrior, which resulted in the error message: "Directory cannot be rebuilt due to disk hardware failure". I was able to copy my Apple files through DiskWarrior although there were a couple of errors.
    My question is how to clone my Bootcamp Partition. I tried making an image with Disk Utility but it failed. I also tried using Winclone and it failed indicating there were hard drive issues.
    Is there another way to try to copy the Bootcamp partition? I can boot to Apple so running a program/app or trying UNIX commands might work.
    Thank you in advance.

    Some previous forum comments I have collected regarding backup of BootCamp.
    Acronis 2011 w/ plus pak, didn't work well previously
    Ghost 15 - probably not
    Casper 6 works for Windows on Boot Camp only
    CopyCatX is more lengthy and sector copy so takes the longest.
    Paragon Hard Drive Suite 2011 because it works great and they have CampTune
    Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
    I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
    I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
    Paragon HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
    I tried the native Windows backup utility.  It worked to backup and restore my Windows partition, but I noticed a "bad" side effect.  When I would restore a Windows Backup to my HD, it would corrupt my MacOS boot partition, so I would then have to restore the Mac partition as well.
    Winclone allows you to migrate your Bootcamp partition from one Mac to another Mac and make sure Windows will boot. However, if the processor (for example, Core Duo or i7) is a different type, the restored version of Windows may not be supported or be able to run on the new Mac. If you are migrating between Macs that are the same type (MacBook Air to MacBook Air, for example), you will have the greatest chance of success. You can try to restore Winclone images between different types of Macs (for example, a Mac Pro to a Mac Mini), but be aware that if Windows boots but does not reach the desktop, it is probably not an issue with Winclone, but rather the change in processor type.

  • Boot Drive fixed but now is not bootable

    First let me say DiskWarriar is an amazing program.
    I had some major issue with my boot drive and DiskWarriar fixed the structure so now I can access the files etc.
    However, the drive is no longer bootable.
    Any suggestions what I should do from here?
    I can see my user folder etc.
    Is there a way to make the disc bootable and all will be as it was before?
    If not, am I going to need to back up certain files and then erase the drive and reinstall the OS?
    Any help would be appreciated.
    Dwaine

    Try resetting your parameter RAM, by following these instructions (instead of typing mac boot):
    http://docs.info.apple.com/article.html?artnum=42642

  • Boot Camp partition created but W7 did not install?

    On a late 2009 MB running Lion 10.7.2 with 2.26 Intel Core Duo I used Boot Camp to partition the drive and tried to install Windows 7 Enterprise w/SP1 (x64 and x86).  The computer restarted in Lion and I can see the Boot Camp partition but I do not think W7 installed.  When I restart and hold the option key there are only the MB and Restore drives available.  Can I install W7 Enterprise?  If so, any suggestions on how to proceed?
    I found this:
    These Macs can use 64-bit editions of Windows Vista and Windows 7 Home Premium, Windows 7 Professional, or Windows 7 Ultimate:
    MacBook (13-inch, Late 2009) and later
    But I have never seen W7 Enterprise listed on either a compatible or incompatible list.
    Thanks in advance,
    Kyle

    Thanks Hatter,
    Actually figured it out and got it installed last night.  Using Explorer now.  What I ended up doing was inserting the W7 disk while in Mac.  Then restarted the computer.  At the chime I held the option key until MAC and Restore and W7 disk appeared.  I selected W7 and Enter.  It installed on the partition as intended.
    I'm not sure why the Windows Installer didn't do this automatically?  And, everytime the INSTALL rebooted the machine I had to hold the Option key to drive it to restart in Windows but that was it.  And, when asked, I selected BootCamp partition, Format, and installed the x64 (not x86).
    When the Windows Install completed I made a few tweaks in preferences then inserted the driver disk I burned during the Boot Camp partitioning process.  There was an executable on it that I OKed and all my drivers were installed.  Video, mouse, wifi...everything works like a champ.
    I partitioned out 50GB because I wasn't sure.  That's at least 10 and maybe 20GB more than needed.  I don't intend to store much on this partition, just need it for access to some work sites and to try to teach myself C# (we'll see how that goes, the last programming I did was in Turbo Paschal).
    I still haven't been asked for product keys.  I assume that is coming after some period of time.
    Thanks for the reply.
    Kyle

  • Recover Deleted Boot Camp Partition

    Hello,
    A week ago I tried to delete Ubuntu from my Windows 8 Boot Camp partition on my MacBook. However, after the process I couldn't boot Mavericks anymore. When I finally got Mavericks to boot, my Windows partition became unbootable. After running the repair disk, I accidentally ran the "clean" command using Diskpart and COMPLETELY wiped my computer of everything - even my Mac OS X partition. The only way I could get my computer to become usable again was to add a partition using the Internet Recovery Disk Utility tools (there were 0 partitions) and fresh-install Lion.
    However, I had all of my important files and apps on my Windows partition and my last backup of it (using Winclone) was outdated. I am not very familiar with this sort of situation, so I was hoping for some help. Currently, I have not attempted to add another Boot Camp partition, but I'm not sure if adding the Lion partition (to make my Mac usable) would make the Windows partition unrecoverable. Also, should I update to Mavericks and then take further action?
    I would sincerely appreciate it if I could receive some assistance.
    MacBook Pro 13-inch, Late 2011
    Processor  2.4 GHz Intel Core i5
    Memory  4 GB 1333 MHz DDR3
    Software  Mac OS X Lion 10.7.5

    Sorry for the late reply!
    I've found the NTFS partition with the right size capacity, 136 GB. However, when I press "p" to list files, the only directory folders that show up are .Trashes and System Volume Information. The partition also appears to be resized (it may have accidentally happened?) because its size is shown as 146 GB/136 GB.
    How would I restore the NTFS partition so that I could fix it with a utility (because I think it's been accidentally resized)? As I'd said above, I deleted my Mac partition too and I had to install a new Lion partition. However, this new Lion partition takes up all of the partition space because there is currently only one, so would I have to re-partition it before I can restore the Windows partition?
    Thanks again!

  • Can you create a boot Camp partition on a Fusion Disk?

    Can I install a BootCamp partition on a fusion disc?
    Can I install a BootCamp partition (Wndows 7) on a 1 TB on which OSX mac Yosemite or Mavericks has been installed first? I have a 2012 MacBook Pro, that already has a 400 GB Boot Camp partition, but I am considering replacing it with a fusion disc or an SSD since I shall have to install a windows compatible medical dictation application that could use a speedier disc. Will Mac OS and Windows interfere with each other on the SSDpart of a large fusion disc ( 1 TB) if I switch back and forth from rebooting on Mac OS , then on Windows and vice-versa? Does the SSD part of the fusion disc get confused, and will the fusion disc tolerate the installation pf a Boot Camp partition in the first place, or just give a stretch of plain 5400 RPM disc without the SSD part ?Can I

    1. On single-disk Macs, you can use an SSHD (as a single physical disk), but not an SSD/HDD. There is a no single physical unit which is a Fusion drive. A Fusion drive consists of a physical SSD and a physical HDD. MBPs on which the Optibay has an SSD/HDD and main bay with SSD/HDD will support a Fusion (aka CoreStorage volume). Yosemite supports a Fusion drive, which has an internal SSD and and external HDD (the reverse makes no sense, but is possible).
    2. On newer Macs, with 1TB PCIe flash, you have an SSD as your whole drive.
    3. The two environments, OS X and Windows are self-contained,  on separate partitions. The underlying hardware is common.
    4. On a Mini, which supports two drives, I have a 256g SSD/1TB HDD, in a DIY Fusion drive, with Windows on the SSD part. Bootcamp Assistant does not support this, but third-party tools can be used. The other option is to install OS X and Windows on a SSD, and later add an HDD and include into a CS volume. This is what I would recommend for you.
    5. The 13-in 2012 MBP will allow you use a USB installer, without the need for an Optical drive, so it is possible to replace the Optibay with an HDD, create a Fusion drive. If BCA is used, it will put Windows on the HDD on this specific machine if the Fusion drive is created first.

  • Help with boot camp partition on leopard!

    So I wanted to increase my partition disc size, because I ran out of space. So I restored it and started the whole process over again, using like 75 out of the 102 gigs of free space. This time, something went wrong. I window came up and said:
    "The disk cannot be partitioned because some files cannot be moved. Back up the disk and use the disk utility to format it as a single Mac OS Extended(journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    All I want to do is repartition it... I need help plz, thanks. Oh and I assumed the big files were obstacles so I deleted some 1-6 gig stuff I used to use not anymore(not any system stuff either) but that didn't work. Help!

    I bought a new MacBook today with Leopard. I tried to install Windows XP (with service pack 2). I chose 32GB for windows. When I clicked start installation the screen went white, the windows CD was ejected and nothing else happened.
    I had to switch it off manually and then I tried to restart the MacBook. The screen was just black.
    I just read this:
    +This means that the Windows partition is not bootable, usually because of a formatting problem. The Boot Camp Setup Assistant creates the Boot Camp partition, but the Windows installer must format it. Boot back into Mac OS X and re run the Boot Camp Setup Assistant. Remove the partition and re create it. Then install Windows again, this time allowing Windows to format the partition. Refer to the "Boot Camp Installation & Setup Guide" PDF document for more detail on installing Boot Camp.+
    I couldn't reboot it into the Mac OS X so I went back to PC World and created merry ****.
    They blamed me and I blamed them and said there was a formatting problem. I left the MacBook with them and they said they would try and install windows XP for me. I collect it today.
    What do I do if they can't get windows on there as I don't really understand what I read above so will need something a bit clearer....step-by-step.
    Can anyone help me please?

  • Creating and restoring a Boot Camp partition using Paragon

    I am trying to restore a clone of the Boot Camp partition that's on my MacBook Air (Snow Leopard) to My MacBook Pro (Lion).
    I was told I could do this without requiring the Windows 7 installation disk by using Paragon Hard Disk Manager.
    I downloaded the Paragon Hard Disk Manager on the MacBook Air in the Windows partition and followed the steps the Wizard told me. I chose back up. I successfully backed up the Boot Camp partition but noticed that the amount of disk space on the back up external drive was about 8GB, but the amount used up by Boot Camp was 16 GB.
    When I went into the new computer and tried to create a Boot Camp partition, I am not able to do this without installing Windows software.
    When I plugged in the external drive which had the back up on it, it just has some files and no Wizard I can use to restore the Windows partition.
    So I think I've done it wrongly.
    When I first started the wizard, there was a choice of making an image. I did choose this initially and a message came up and said I had done this but there was nothing else - no information about where this image was and what I should do with it. So I chose "Back up" and that is where I am.
    Even if I do manage to create an image that contains everything, the operating system and the files, how can I restore that to the newly created Boot Camp partition on the other computer if in order to create the Boot Camp partition I need to install a Windows 7 disk?
    It's not that I don't have a valid Windows 7 installation disk, I do but I have to call telephone support to install it because the activation is tied to the first laptop which has issues and needs to be repaired and that's why I am doing the migration of the data. And it's inconvenient to do the telephone thing because it's after hours now and I want to get the clone of the Windows partition before I send off the computer for repairs which I am supposed to do tomorrow morning.
    Plus, I am not sure by using the Windows 7 installation disk and migration of data method that I will have the partition looking exactly the same as before, and that's very important for me because I do internet banking with a foreign bank and it took ages for them to set up the internet banking on my computer, and I am worried that internet banking won't work if I do not have an exact clone of the Windows partition.
    I can go back again and try making an image disk but I still have the problem of using the Paragon program which is a Windows program on the Mac operating system, which I have to use when I am creating the Windows partition. Is there other software from Paragon that I am supposed to get?

    Paragon didn't work for me and their support is quite lousy. I think I just threw $50 away.
    I didn't need another activation key to install Windows 7 on the second computer (MBP). The boot camp installation went smoothly. Once in Windows, I downloaded the software again, Paragon Hard Disk Manager, and then chose "restore". It didn't recognize the archive I had made on the external hard drive no matter what I did. I had to give up after a few tries.
    So I went to the Paragon website to look for answers in the support section.
    They do not respond to emailed support questions for up to three days after you send in the question even if you are a new customer.
    I am tempted to ask for a refund because they have false advertising claiming that their product works when it doesn't.
    The steps are not that hard to follow if you use their Wizard and the Wizard told me that I had done everything right and that I had created an archive and I named it and everything.
    When I went to restore it, nothing. I couldn't even eject the volume. Very strange.
    Their FAQ on Support site is unhelpful and full of technical terminology. Nothing pertains to my problem.
    I really don't want the headache. Besides if all I wanted was to do a backup I could have used the free back up and restore utility in Windows 7 which is meant to be excellent.
    Another Apple Support Discussion member  said they had a similar problem, a problem with the archives, and that even after working with Paragon for seven months, it was still not resolved.
    After a certain period of time after you've bought the product, you have to pay $50 to get support. It's not worth the bother.
    It's a German company and German companies in general are not big into service. I can tell that this is true with this company.
    So having been burned, I really do not want to keep going down this path. I really just want my money back.

  • The Invisible Boot Camp Partition

    Basically, my Windows partition does not show up on my Mac side of things.
    It shows up in Disk Utility as "disk0s3" but is not mountable. It cannot be mounted if I use the MacFuse and NTFS-3G solution. It cannot be mounted with Paragon's NTFS for Mac OSX. If I open up VMWare Fusion it detects a Boot Camp partition but cannot run it saying instead there is not mountable device. Also, in System Profiler, the partition does not show up under the Serial-ATA section where my OS X partition does.
    That being said, Windows runs fine with no issues that I've found.
    The way I had to install it was via a work-around since I'm another one of those people who could not format my partition during the installation process. Instead I partitioned via Boot Camp, then used an Ubuntu disk to format the volume to NTFS and install Windows, which worked perfectly sans the OS X side of trouble.
    Does anyone know what I can do to fix this problem be it either reinstalling Windows another way or may figuring out why OS X can't see it?

    Solution: Remove the volume and reinstall windows via another method. Hopefully 10.5.2 will fix the Boot Camp issues...

  • Upgrading Operating System in Boot Camp Partition

    I am currently running Windows XP in my Boot Camp partition. I want to upgrade to Windows 7 when it comes out in October. Can I so this with the upgrade version of Windows 7 without removing the Boot Camp partition? I understand that you can't install an upgrade version of an operating system when you create a boot camp partition, but I'm wondering if you can do so if you are upgrading an existing operating system?

    Only Vista, and you would need NTFS and do clean install.
    http://windows.microsoft.com/en-US/windows7/products/home?os=win7
    http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=977 3778#9773778

  • I had to replace my iMac due to hard drive and Logicboard failure, so I want to reinstall Windows 7 on a Boot Camp partition. Will there be a problem reactivating Windows 7 Home Premium?

    I had to replace my iMac due to HDD and Logicboard failure, so I want to reinstall Windows 7 on Boot Camp partition. Will there be a problem reactivating Windows 7 Home Premium?

    Hi,
    should be no problem.
    Best case is you can activate online via Internet.
    Worst case is you have to call Microsoft and explain that it is the same computer after a mainboard failure.
    Regards
    Stefan

  • HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

    On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

    Yes, purchase Paragon Camp Tune for the job.

Maybe you are looking for