Thermal Noise Source - white noise sample file

Hello!
I just used a sample multisim file and there is a problem I cannot solve and I neither found a solution here.
I use Multisim 12 for school and I am experimenting with the multisim sample file WhiteNoise.ms12
from the directory
National Instruments\Circuit Design Suite 12.0\samples\Educational Sample Circuits\Miscellaneous
(you can open it by menu File/Open Samples)
Now here is what i did, I opened the file and replaced XSA2 (a spectrum analyser) for an oszilloscope
to watch the voltage at the resistor R2. Now I start the simulation and double click on the oszilloscope
and I can see the signal and the white noise. well, so far so good. now I stop the simulation and
double click on the Thermal Noise Source to edit some properties or in fact you do not have to change
anything, just close the window with OK (not cancle!) and now simulate again: the noise is gone!
Can anyone help me with this problem? I can't get back the white noise.
(I worked with a copy of the sample file, so I did not destroy anything.)
Thank you very much for your help!
Mathias

Hi Mathias,
I see the problem and this is strange. After you open the white noise properties dialog then close it, when looking at the model in the background the noise settings are empty, that’s why you see a square signal source. In the attached circuit, I replaced the noise source with one from the current database and it does have the same problem.
Tien P.
National Instruments
Attachments:
WhiteNoise_a.ms12 ‏244 KB

Similar Messages

[svn:osmf:] 15952: Attempting to fix server build ( missing source path to sample plug-in), take 2.

Revision: 15952
Revision: 15952
Author:   [email protected]
Date:     2010-05-07 10:07:24 -0700 (Fri, 07 May 2010)
Log Message:
Attempting to fix server build (missing source path to sample plug-in), take 2.
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/OSMFPlayer-build-config.xml

Joey,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop.
Next, go to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as described above to get to the correct Library Folder.
Restart using a Safe Boot, and after the Safe Boot is complete startup normally and test Calendar for functionality.

[svn:osmf:] 15951: Attempting to fix server build ( missing source path to sample plug-in).

Revision: 15951
Revision: 15951
Author:   [email protected]
Date:     2010-05-07 09:57:57 -0700 (Fri, 07 May 2010)
Log Message:
Attempting to fix server build (missing source path to sample plug-in).
Modified Paths:
    osmf/trunk/apps/samples/framework/OSMFPlayer/OSMFPlayer-build-config.xml

Joey,
Try removing the com.apple.iCal.plist file from your Macintosh HD/Users/yourusername/Library/Preferences Folder. To find that Library folder, use Finder>Go Menu>Depress the "Option" key>Library. Drag the .plist file to your desktop.
Next, go to your Macintosh HD/Users/yourusername/Library/Calendars Folder and remove any files with "Cache" as a part of the file name. Use the same method as described above to get to the correct Library Folder.
Restart using a Safe Boot, and after the Safe Boot is complete startup normally and test Calendar for functionality.

Dreamweaver CS6 Sample file

Dreamweaver CS6 Sample file,
jQueryMobileLocalMultiPage Original Source file (img, xml, html...)
Where is this?

Can you provide us with more context for your question - a link to the document that you are looking at or a screenshot of what is being displayed on your computer?
Thanks,
Preran

Bad Sample Files or I'm intoxicated

I believe you guys may have some miss information in your sample files or the beer I have consumed this evening has comprised my comprehensionfaculties.
I'm trying to test out the TLF sample files in Flex 3.2 and 3.3 however I am getting compiler errors. I may be missing a .swc that the instructions didn't mention or you may have some outdated references in your sample code.
The sample files I downloaded and readme are here:
http://opensource.adobe.com/wiki/display/tlf/Text+Layout+Framework
The readme suggest that the samples are compatible with Flex 3.2 and indeed give instructions for how to get it working. However, after following the instructions (and figuring out a few of the ambiguous steps) I was able to get almost everything working except a few small things like compiling and actually running the sample. =)
When I try to compile I am getting the following errors from the SimpleEditor example (the only project I am using):
Unable to find:flashx.textLayout.conversion.TextConverter
(is this file in another .swc the instructions missed or perhaps it is Flex 4 class and therefore not compatible with Flex 3.2-3?):
Undefined method:_textFlow.interactionManager.selectRange
(has this been changed to setSelection I wonder?):
Undefined event: StatusChangeEvent.INLINE_GRAPHIC_STATUS_CHANGE
(could be a typo in your sample code *INLINE_GRAPHIC_STATUS_CHANGED* <--- NOTE: The added “D”
Any help and guidance would be much obliged.
PS. you have some hardcoded paths in your sample files that make running the samples a tad vexing.
-erik

I have tried downloading the samples and I am able to run them without any issues, may be you have an older version of tlf swc. To get the latest swc and the sdk you can download the source of sdk and swc from svn. Visit the following URL to get the instructions on how to get the source, http://opensource.adobe.com/wiki/display/flexsdk/Get+Source+Code.
Hope this helps.
Thank You
Chetan Sachdev
http://www.riageeks.com

How to get the source code in PAR file

Hi All,
I used the PAR migration tool to migrate from PAR to EAR file. When I imported the EAR into NWDS 7.3, I was just able to see the structure and jsp files and could not find the java source code files. I would requires the java source code to make modifications so that deprecated APIs can be replaced and to also make the code compatible with JDK 1.6.
I think the original 7.0 PAR file itself does not contain the source code. I decided to use the "Include source code" option when exporting the 7.0 PAR.
I have the portal application DC project in my NWDS 7.0. However, when I try to export the PAR file using Export --> PAR File -- > Next... I am unable to select any project from the list. The list appears blank with disabled Next & Finish buttons.
I also noticed that in the portal DC application structure, there is a .sda file under /gen/default/deploy. Also there is no PAR folder under /gen/default/public.
How do I include the source in the PAR file so that I can edit the same after migrating to EAR format ?
Regards,
Melwyn

DC and PAR/EAR stuff are different formats, SC/DC is an archive type used by NWDI, if I got it right.
How do I go about generating the PAR file (with source) ?
In fact through including the seources while creating the PAR/EAR in NWDS, but: no need to do that, you can also depack SDA (rename it to zip). If you wanna just see the Java sources you will find them there, otherwise decompile as Vijay already sad.
cheers

Opening plug in settings, sample files, loops, effects, etc

What application do I need to use to open the plug in settings, sample files, loops, etc.? Some open with quicktime, however, most all of them are pst files. I am new to this and have no idea what that is. The files are there, they just won't open, even if I change them to open with quicktime. Any help would be appreciated.
Garage band v1.1.0 (26) Mac OS X (10.4.8)

I've tried opening them from within garageband, no success. I went through finder just to see what type of file they were compared to the ones that would open. the ones that will open open with quicktime and are .aif files. The other ones won't open even if I select quicktime as the application to open them with. I know I sound stupid, but I'm kinda new to the digital recording. Am I missing an application or driver or something? Thanks for responding.
Mac OS X (10.4.8)

Source Directory same in FIle to IDOC

Hi Friends
Can we have a same File Name and same Source Directory for 2 different scenarios?
Means in my communication channel i am putting
this
Source Directory : /POS/input/test
File Name: *.DAT
for one let us say ABC file to xyz-iDOC scenario
and same Source directory and same file name for
another scenario say hgf file to uio-iDOC scenario
Will it work or do i have to change the name of the file or something?
Please guide
Thanks

Swarup,
I've some doubts.
>It will definately work provided you have not marked any action such as archive or delete file after processing in sender communication channel.
Ok, I agree to this point. If you give TEST mode then obviously it will work. Provided there is atleast some time gap between these communication channels polling time. For example Channel1 Polling time 60 seconds, Channel2 Polling time 60 seconds. For example if he activate the first channel at 10:00:00 AM, then he need to activate the other channel 10:00:30 AM( hh:mm:ss). But I always need to make sure, re-activating again it's big pain we need to check at what time the first channel is activated based on that u need to re-activate the next.
>If suppose you need to use the file for both scenarios then you could even use the common sender communication channel also.
Is it, are u sure? So u mean the same comm.channel can be assigned to different scenarios also is it? I mean for two diff.O/B Interface you can create two diff.sender agreements with same channele? Can you try this and let me know?
raj.

How to create source system for flat file loads

How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.

hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
           |---> context menu
               |--->create......
step:3 select your required source system Icon.
          (in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)

Acrobat Reader DC one source of pdf attached files

I have a MacBook Pro and found that since updating to Acrobat Reader DC there is one source of pdf attached files that do not open (I just get a black screen).
I do not have this problem with my iPad nor with an iMac also running the same reader.
I cannot find any 'switches' that will resolve this problem. I get an error message saying that Acrobat Reader DC could not open "File reference" because it is either not a supported file type or because the file has been damaged. This cannot be the case as this file opens on other computers so it has to be localised to my MacBook Pro. Other pdf files open normally and I am at a lost in deciding as to what is going wrong and how to rectify.

If the same attachment can be viewed successfully on other devices, then it must get corrupted during the download on that one machine.
People should really stop sending e-documents as attachments, it is much safer using a file sharing service such as Acrobat.com - upload and share the document, then send the download link via email.

Informatica - import data from line 6 in sample files in universal adapter

Hi ,
I am trying to extract data from R12 tables to sample CSV files provided by oracle in universal adapter CRM analytics.
As per oracle guidelines we are supposed to import data from line 6 as first five lines will be skipped during ETL process.
While importing the the target file in target designer ,I am entering 6 as value in the Lov box "Start import at Row".
Still Data is loaded from first line of the file and not 6 th line.
Please let me know more on how to achieve this requirement.
Thanks,
Chaitanya.

HI,
Please let me know the solution for this.It is very high priorirty for me now.
I want to extract data into sample files provided by oracle starting from 6 th line.
At present I am able to load from first line of the .csv file.
Thanks,
Chaitanya

Problem with sample file "SampleShapefileToJGeomFeature"

I download two zip files shape2sdojava.zip and sdo_java_040319.zip (http://www.oracle.com/technology/software/products/spatial/index.html) , because I want write java aplication that will work with shp files.
I tried to compile this example file "SampleShapefileToJGeomFeature.java", but i get error message:
Exception in thread "main" java.lang.Error: Unresolved compilation problems:
     DBFReaderJGeom cannot be resolved to a type
     DBFReaderJGeom cannot be resolved to a type
     The constructor ShapefileReaderJGeom(String) is undefined
     ShapefileFeatureJGeom cannot be resolved to a type
     ShapefileFeatureJGeom cannot be resolved to a type
     The method getShpFileType() is undefined for the type ShapefileReaderJGeom
     The method getMinMeasure() is undefined for the type ShapefileReaderJGeom
     The method getMaxMeasure() is undefined for the type ShapefileReaderJGeom
     The method getMinZ() is undefined for the type ShapefileReaderJGeom
     The method getMaxZ() is undefined for the type ShapefileReaderJGeom
     The method getMinX() is undefined for the type ShapefileReaderJGeom
     The method getMaxX() is undefined for the type ShapefileReaderJGeom
     The method getMinY() is undefined for the type ShapefileReaderJGeom
     The method getMaxY() is undefined for the type ShapefileReaderJGeom
     The method getShpDims(int, double) is undefined for the type ShapefileReaderJGeom
     at SampleShapefileToJGeomFeature.main(SampleShapefileToJGeomFeature.java:303)
So is this mean that this class DBFReaderJGeom does not exist in java.spatial.util?
Maybe this sample file is outdated, because class ShapefileFeatureJGeom is changed, now takes two parametars insted of one.
Message was edited by:
user547750

I found similar problem on this thread
Oracle Spatial Java API Problem
Is it possible for somebody to send me on mail these jar libraries from oracle database 10gR2?
And I dont know why this is not fixed yet on the oracle web site?
mail: konj_p @ yahoo.com
Thanks

How to save kontakt sample files in Logic Pro X project?

Hi,
I'm using Kontakt (Komplete, Native Instruments) as my samples for my midi in Logic Pro X, and my sample libraries are stored in an external hard drive which I bring around.
I need to send my Logic file over to another computer which will not have my hard drive that contains my sample libraries.
Is there a way to save my Kontakt Sample midi files together with Logic's folder, so when I open Logic without my ext Hard Drive, the midi can still be read?
I tried clicking Save As --> Organize my project as a "Folder", and ticked EVERYTHING --- Audio Files, EXS instruments and samples, Ultrabeat samples, Space Designer impulse responses, Movie file, Include Apple Sound Library Content.
But when I unplugged my external hard drive (which my sample files are stored), and clicked open that logic file which i saved, windows pop up saying it cannot locate my samples.
Is this a bug in Logic Pro X, or am I doing something wrong?
Or is it totally not possible to copy sample files over?

skylurker wrote:
I tried clicking Save As --> Organize my project as a "Folder", and ticked EVERYTHING --- Audio Files, EXS instruments and samples, Ultrabeat samples, Space Designer impulse responses, Movie file, Include Apple Sound Library Content.
<snip>
Or is it totally not possible to copy sample files over?
Hi
Logic will not copy over any 3rd party samples etc. If you really need to, you would need to copy the appropriate libraries manually, though with Kontakt, some libraries would need to be re-authorised.
CCT

Input Agent Sample File and mappings

Dears
I'm working on a project where I need Documents exported from OFR to be imported to IPM. I'm defining an input agent to monitor the input directory where exported files from OFR are located. I did all the configurations needed in EM,defined the agent in IPM, however, the input agent is not working.
I guess the problem is with the input agent definition, esp the sample file. I'm finding difficulty in understanding the "Sample File" (what does it represent, where shall it be located, to where the "file path" in it should be indicating).
Please advise

Hi,
For the sample file itself, it defines the format in which the input file would be setup for the input agent to import documents into IPM.
For the path of where the input file is present, log in to the em console and when you open the IPM managed M-beans you would have the path defined for the input file.
Check this out and you would be in a good position to understand input agents.
http://docs.oracle.com/cd/E23943_01/admin.1111/e12782/c09_input_agents.htm#BABBCBIC

Accessing OID in OBIEE VM Samples Files

I'm trying to set up access to the expanded OBIEE 11.1.1.5 Sample files, by loading the VM application. I've successfully set up the Virtual Machine and loaded the Sample App image and I'm trying to work thru the instructions to get all of the components in place. This is the document I am using to guide me:
[url http://www.oracle.com/technetwork/middleware/bi/downloads/sampleapp107-vbimage-deployguide-453583.pdf]http://www.oracle.com/technetwork/middleware/bi/downloads/sampleapp107-vbimage-deployguide-453583.pdf.
Right now I'm at Section 4.5 of the guide in the section called 'ACCESSING IOD'. It reads:
+'You can connect to the OID directory using the configuration in the image attached. From there, you can create or edit more OID specific users or attributes.'+
It then shows a screen print of a dialog box.
The instructions give me no clue as to how I would connect to OID using the configuration. My question: How do I connect to OID and make this connection?
I looked for a link to OID in the VM app but don't see anything. Honestly I'm not clear on what I will use OID for, but I imagine that it is necessary to take full advantage of the sample files. Note that I'm not interested in diving deeply into learning all about OID today. Rather, I just want to make the connection as per the instructions and move on to the next step in setting up the VM Sample App. Thanks for any help on this.

I'm trying to set up access to the expanded OBIEE 11.1.1.5 Sample files, by loading the VM application. I've successfully set up the Virtual Machine and loaded the Sample App image and I'm trying to work thru the instructions to get all of the components in place. This is the document I am using to guide me:
[url http://www.oracle.com/technetwork/middleware/bi/downloads/sampleapp107-vbimage-deployguide-453583.pdf]http://www.oracle.com/technetwork/middleware/bi/downloads/sampleapp107-vbimage-deployguide-453583.pdf.
Right now I'm at Section 4.5 of the guide in the section called 'ACCESSING IOD'. It reads:
+'You can connect to the OID directory using the configuration in the image attached. From there, you can create or edit more OID specific users or attributes.'+
It then shows a screen print of a dialog box.
The instructions give me no clue as to how I would connect to OID using the configuration. My question: How do I connect to OID and make this connection?
I looked for a link to OID in the VM app but don't see anything. Honestly I'm not clear on what I will use OID for, but I imagine that it is necessary to take full advantage of the sample files. Note that I'm not interested in diving deeply into learning all about OID today. Rather, I just want to make the connection as per the instructions and move on to the next step in setting up the VM Sample App. Thanks for any help on this.

Thermal Noise Source - white noise sample file

Similar Messages

Maybe you are looking for