Thermocouple Node Part Numbers - Difference between programmable and non-programmable nodes?
Hello!
We just received our starter kit and nodes. When looking at the part number on the back of the programmable thermocouple node (with the starter kit), it is listed as "197085D-01L". There is no number that matches the Part Number listed on the website, such as 780998-02. The non-programmable thermocouple nodes also have this same "197085D-01L" part number on the back. Is there another way to determine which of these nodes have LabVIEW capability?
Thanks!
Garrett
Solved!
Go to Solution.
Hello,
There is a $300 difference in the list price for the programmable and non-programmable nodes which is the ballpark figure for the license. I have included the links below for the product pages below, but our Sales team would be able to assist you with the actual price. Purchasing and sales contact information are also listed on the product pages as well.
NI WSN-3212 4 Ch, 24-Bit, Programmable Thermocouple Input Node
http://sine.ni.com/nips/cds/view/p/lang/en/nid/207089
NI WSN-3212 4 Ch, 24-Bit, Thermocouple Input Node (Non-programmable)
http://sine.ni.com/nips/cds/view/p/lang/en/nid/206922
Best,
National Instruments
Applications Engineer
Similar Messages
-
Difference between configurable and non configurable finished goods master
Hi
Pl explain the difference between configurable and non configurable finished goods master data.
Thanks
kamalaHi,
Configurable material are used when you have a large number of combination of parts that go into a product. It means different combinations of the parts for same material. If you maintain a unique material code for each combination , you require a large number of material numbers. KMAT is used in such a case where you maintain just one generic product code. You assign class to this material having all variant characteristics.
A super BOM is maintained for such a material consisting of all possible alternatives. A super routing is also maintained consisting of all possible operations that could be used.
Typically configurable material is used in Made To Order (MTO) environment. However frequently ordered configurations may be planned with a material variant which needs to have a material master record. Thus Material variants may have stock and value. Depending upon characteristic values chosen at sales order entry Sales Order BOM is created. Routing operations are also chosen depending upon which BOM components are assigned to them.
Non configurable materials are like finish, semi finish materials having fixed BOM. A separate/single BOM exits for every finish material.
Revert back for more info.
thanks and regards,
Man -
What is the programming (ABAP) difference between Unicode and non Unicode?
What is the programming(ABAP) difference between Unicode and non Unicode?
Edited by: NIV on Apr 12, 2010 1:29 PMHi
The difference between programming in Unicode or not Unicode is that you should consider some adjustments to make on the Program "Z" to comply with the judgments Unicode Standard.
In the past, developments in SAP using multiple systems to encode the characters of different alphabets. For example: ASCII, EBCDI, or double-byte code pages.
These coding systems mostly use 1 byte per character, which can encode up to 256 characters. However, other alphabets such as Japanese or Chinese use a larger number of characters in their alphabets. That's why the system using double-byte code page, which uses 2 bytes per character.
In order to unify the different alphabets, it was decided to implement a single coding system that uses 2 bytes per character regardless of what language is concerned. That system is called Unicode.
Unicode is also the official way to implement ISO/IEC 10646 and is supported in many operating systems and all modern browsers.
The way of verifying whether a program was adjusted or not, is through the execution of the UCCHECK transaction. Additionally, you can check by controlling syntax (making sure that this asset verification check Unicode).
The main decisions to adjust / replace are (examples):
ASSIGN H-SY-INDEX TEXT TO ASSIGN <F1> by
H-SY-INDEX TEXT (*) TO <F1>.
DATA INIT (50) VALUE '/'. by
DATA INIT (1) VALUE '/'.
DESCRIBE FIELD text LENGTH lengh2 by
DESCRIBE FIELD text LENGTH lengh2 in character mode.
T_ZSMY_DEMREG_V1 = record_tab by
record_tab TO MOVE-Corresponding t_zsmy_demreg_v1.
escape_trick = hot3. by
escape_trick-x1 = hot3.
itab_txt TYPE wt by
ITAB_TXT TYPE TABLE OF TEXTPOOL
DATA: string3 (3) TYPE X VALUE B2023 '3 'by
DATA: string3 (6) B2023 TYPE c VALUE '3 '.
OPEN DATASET file_name IN TEXT MODE by
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING NON-UNICODE.
or
OPEN DATASET file_name FOR INPUT IN TEXT MODE ENCODING DEFAULT.
CODE FROM PAGE TRANSLATE a_codepage record by
record TRANSLATE USING a_codepage.
CALL FUNCTION 'DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'WS_DOWNLOAD' by
CALL METHOD cl_gui_frontend_services => gui_download
CALL FUNCTION 'UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
CALL FUNCTION 'WS_UPLOAD' by
CALL METHOD cl_gui_frontend_services => gui_upload
PERFORM USING HEAD APPEND_XFEBRE +2. by
PERFORM USING HEAD APPEND_XFEBRE +2 (98).
Best Regars
Fabio Rodriguez -
Difference between deamons and non deamons
Pls someone tell me wat is the difference between deamons and non demons and i know that deamons will run in the background..and pls tell me why they r used...
Actually it's "daemon" (mythologically speaking a little more benign than demons).
A Java program terminates when every non-daemon thread finsihes. Setting a thread to daemon mode simply says that it's ignored for this purpose. It's usually used with background activities that can be abandoned at the end of the program without any need to clean up.
(More widely, in unix, a daemon program is one that runs in the background all the time, from when you boot up the machine to when you close it down.) -
Difference between cumulative and non-cumulative key figures
Hi,
What is the difference between cumulative and non-cumulative key figures and under what conditions they are used. What is snapshort and where it is used.Hi.............
Basically the key figures are of two types cumulative and non cumulative.
Cumulative are the normal one which you use always and they always bring the new values of the key figures in the delta that is if suppose A has value 10 and after change the new value is 20 then you will use cumulative key figures there, and your delta( new value) will bring 20.
but suppose your key figures field only the change in the prior value that is in this case the delta in the key figure value will bring 10 (20-10- change of 10 )as new value in the key figure A then you will have to model it through the non cumulaitve key figures.
Now
1) Cumulative is for the first case that is if the key figure alwyas brings the new values of the key figure and not the change sin the key fiures value.
2)NCum. value with NCUM value change:
In this case ther is only one field which brings the changes for a particualr key figure and you ahve to define that key figure as non cumulative.
Ex: In case of stock only one filed brings both ingoing value and outgoing value so 10 ,-4,100,-34.....
In this case you will this option and use the key figure here in the space provided.
3) In this case you haev two separate key figures one for the inflow of stocks and one for the outflow of the stocks.
you use one key figure for the inflow and one key figure for the outflow.
The main key figure autiomatically takes care of the logic and gives the correct output upon the summation
net value of stocks( inflow- outflow).
Also do remember in this case the key figure for inflow and out flow are the basic key figures that is cumulative key figures.
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory. here the aggregation of key figure is based on the another info object
There are two different ways to define non-cumulative key figures:
Non-cumulative key figure with non-cumulative changes:
Before you can define the non-cumulative key figure, an additional cumulative key figure containing the non-cumulative change must exist as an InfoObject.
Non-cumulative key figure with inflows and outflows
There has to be two additional cumulative key figures as InfoObjects for non-cumulative key figures - one for inflows and one for outflows. The cumulative key figures have to have the same technical properties as the non-cumulative key figure, and the aggregation and exception aggregation have to be SUM.
Features of non-cummulative key figures
A non-aggregating key Figure.
Records are not summarized for Reporting
Exception Aggregation is being applied on these key figures on the level of one or more info objects usually with time .
Examples: Head Count, Account balance, Material stock
consider simple senario
Date Net Stock Quantity Sales Revenue
01.02.2005 40 1000
02.02.2005 50 2000
03.02.2005 25 3000
this is the query output if stock quantity has treated as cummulative and non-cummulative key figures
if stock quantity taken as a cummulative key figure
Date NET STOCK QUANTITY SALES REVENUE
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 100 6000
in the above result the key figure has aggregated to the total value that wont give sense to the net stock quantity
if stock quantity taken as non-cummulative key figure
Date Net Stock Quantity (LAST) Sales Revenue
01.02.2005 30 1000
02.02.2005 50 2000
03.02.2005 20 3000
RESULT 20 6000
Hope this helps you..............
Regards,
Debjani................
Edited by: Debjani Mukherjee on Sep 15, 2008 7:22 AM -
Difference between stock and non stock material
what is the difference between stock and non stock material. example of stock and non stock material?
Hello,
Stock Material
Material that is constantly kept in stock .A stock material has a material master record and is managed on a value basis in a material stock account.
Ex: Raw Material.
Non-stock Material
Material that is not held in stock because it is consumed immediately.
Ex: Office Stationary.
You need to create purchase order and accounting document for payment but the stock balance is always zero as it is issued out immediately to the various department.
Prase -
What is the difference between cumulative and non cumulative keyfigures?
Hi Friends
What is the difference between cumulative and non cumulative keyfigures, when we r using the cumulative and non cumulative
Regards
RavindraHi Ravindra,
Have a look at the help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Go through these.
Re: Types of non-cumulative keyfigures
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
See the following threads
non-cumulatives KF in reporting
Re: use of non cumulative keyfigure
Re: When do we use Non-Cumulative values?
Key figures:
1. Cumulative Vaules
2. Non Cumulative Values
Cumulative Values:
Cumulative Values are Keyfigures for which Keyfigure Values are must posted in every time unit that reported on (= time period specific Values).
Example:
Revenue
Non Cumulative Values:
Non Cumulative Values are Keyfigures for which KeyFigures are only evaluated for selected time Periods.
Cumulative Keyfigures With Exception Aggregation:
It's a 'normal' KF (with summation, min or max as aggregation behaviour), but you set some exception in this behaviour...for example, you can say that a KF, normally aggregated by 'summation', have to show the max value (or the average, or '0' or something else), that is the 'exception aggregation' when you use it in combination with 0DOC_DATE (or other char), that is the 'exception aggregation char reference'...in this case OLAP processor give to you the possibility to see your KF with different behaviour depending from you use 0DOC_DATE (in our example, MAX) or something else (SUMMATION).
Non Cumulative keyfigure with Associated Single Delta:
If you have a stock KF that is fed from only one (other) movement KF that can assume positive and negative sign.
KF1 (initial) STOCK (non-***.) = 100
KF2 flow = -30
KF2 flow = 70
KF1 (final) STOCK (non-***.) = 140
Non-cumulative key figure with associated in and outflow:
This is the case of 2LIS_03_BF KF stocks fields.
Here, we have the same situation in point 2, but you will have not only ONE flow KF, but TWO, one dedicated to in and another one dedicated to out !
You have to use this scenario if you have no KF that have positive and negative sign, but two KFs each one representing positive (in) and negative (out) logical sign!
KF1 (initial) STOCK (non-***.) = 100
KF2 (out))flow = 30
KF3 (in)flow = 70
KF1 (final) STOCK (non-***.) = 140
Website Addresses For Non Cumulative KeyFigures:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.html
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.html
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
http://help.sap.com/saphelp_bw32/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.html
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
Check this very useful docu.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
****Assign Points If Helpful****
Regards,
Ravikanth -
Difference between automatic and non-automatic page attributes
Hi,
Can anyone tell me difference between automatic page attributes and non-automatic page attributes?
and also difference between stateful and stateless mode with examples?
Thanks
NarendraHi Mullapudi,
If you mark a page attribute as u2018automaticu2019 (auto in the system), the attribute automatically gets its values via the calling URL or
via the navigation process from other pages.
This kind of attribute only has to be declared for one page.
It is identified by its name equivalence.
If another page uses a parameter with the same name,
at runtime that parameter automatically
gets the same values as the attribute.
Non-automatic page attributes
If you flag a page attribute as non-automatic, the attribute gets its values from the class attribute.
The visibility of page attributes when parameters are transferred between BSP pages depends on whether the navigation is explicit or implicit.
Explicit navigation
For example, if navigation->goto_page(page.htm)
Implicit navigation
With implicit navigation, the page attributes are transferred automatically from OnInputProcessing to OnInitialization, both in stateful and stateless mode.
The auto page attributes are refilled by the request, both in stateful and stateless mode.
Reward if Useful...
Regards,
Anita. B -
Difference between sticky and non sticky
Hi all,
what's the difference between
a) switchport port-security mac-address xxxx.xxxx.xxxx
b) switchport port-security mac-address sticky xxxx.xxxx.xxxx
Somewhere deep down in the documentation I find that you may use both, but should prefer the version without sticky. Why ? Is there a difference ? At a first glance, I don't see any.
Maybe "sticky xxxx.xxxx.xxxx" in a config is just an indicator to give you a quick visual indication that this mapping was learned and written to the config dynamically - opposed to static mapping without "sticky"? If so, what sense is behind doing static mapping and still be able to use sticky in combination with static mac-addresses like in version b) above ?
Later,
OliverI hope this helps:
"After you have set the maximum number of secure MAC addresses on a port,
the secure addresses are included in an address table in one of these
ways:
- You can configure all secure MAC addresses by using the switchport
port-security mac-address mac_address interface configuration command.
- You can allow the port to dynamically configure secure MAC addresses
with the MAC addresses of connected devices.
- You can configure a number of addresses and allow the rest to be
dynamically configured.
Note If the port shuts down, all dynamically learned addresses are
removed.
- You can configure MAC addresses to be sticky. These can be dynamically
learned or manually configured, stored in the address table, and added to
the running configuration. If these addresses are saved in the
configuration file, the interface does not need to dynamically relearn
them when the switch restarts. Although sticky secure addresses can be
manually configured, it is not recommended."
<http://www.cisco.com/en/US/products/...02c30 af.html>
The point is with using 'Sticky', this feature essentially is allowing you to set the maxumim number of DYNAMIC learned mac addr's (or nodes) that can tx/rx frames on this port. The the switchport port-security max command is a safeguard to prevent someone connecting a hub to the port for example. Or even a another switch. Without the switchport port-security command we would be unable to stipulate which node based on mac address ID, to allow to use the port.
Perhpaps the way to think about this, and to make it very clear is to imagine if you did not have this flexibility - what would be the drawbacks?
hth,
Ajaz
pls rate this post if it helped. -
Difference between Valuated and Non valuated Sale order stock
Hi All,
Can anybody tell me the difference between the above said subject with the steps involved in each scenario.
That is valuated sale order stock and Non valuated sale order stock in Product cost by Sale Order.
With Journal entries at each step and whether any WIP or variances at Production order level and sale order level and all the financial entries related to them
Thanks in Advance,
Ravi KumarHi Shail,
Thans for your inputs,
But I wanted to know it in more detail. In what scenarios they are used with financial entries in both the cases.
I will give you my scenario. It goes like this,
My client is in pipe coating business, who receives pipes from customers and does only coating work(which is considered as service) and despatches it to the customer. this process is carried on the basis of work order(Sale order).
Now Production order is created and work is done on that with reference to Sale order for that particular customer.
So the pipe which my client receives should be non valuated stock as it will not be a raw material to them and the cost incurred on it is booked on production order like chemicals as raw material consumption, activity cost etc.
now in this scenario just tell me how and at which stage FI entries get generated at Production order and Sale order level, and also at wat level Standard cost estimate should be created i,e at production order level or sale order level(sale order cost estimate).
Will there be any entries at goods isssue and GR against production order. If no then how the COGM account will get hit.
Please tell me this scenario in both cases Valuated sale order stock and Non valuated sale order stock with financial entries in Sale order costing.
Thanks & Regards,
Ravi Kumar -
HT3939 difference between G and non-G phones
What is the difference between the 3G & 4G phones vs, the non G versions?
as G is not used in the article you came from I'm assuming you see it from various 3th party sellers
this is the list of all ios devices ever made
https://en.wikipedia.org/wiki/List_of_iOS_devices
but various resellers could use other names
G mean generation
in the gase of the iphone3g and 3gs it's because they were the first to support the third generation cellphone network called UMTS https://en.wikipedia.org/wiki/Umts
the Iphone 5 and newer support the 4g cellphone network called LTE https://en.wikipedia.org/wiki/LTE_(telecommunication) -
Difference between usage and non usage of NWBC from GRC prospective
Hi
we have GRC 10.0 server. and i would like to know what is the difference between accessing GRC screens with NWBC, and from normal sap gui....
please post your comments.....
regards
KevinHi Kevin
My understanding is that no one will have access to SPRO other than administrator .So all GRC admin related activities will done by SAP GUI (SPRO ) and as administrator he will have access to NWBC also .
Where as other user like functional consultant , compliance officer etc need not to do any admin related task hence do need access to SAP GUI and can do their tasks from NWBC .
Thanks & Regards
Asheesh -
Difference between Deductible and Non Deductible tax
Hi All,
Could you please explain me the difference between deductible tax and non deductible tax and when to which type of tax. Also please kindly explain with an example.
I know that this would consume some valuable time of urs, but please kindly explain me this.
Thanks in advance
DSK.Hi
In some countries, u can take credit for tax paid i.e. Tax vatable/deductible - in this case the tax amount is debited to a asset gl account and then later set off with ur tax payable
and for some taxes it might be non-vatable/non deductible - in which case the same would then be added to the inventory/expense
The settings for this would be done under tax conditions in MM
Thank You, -
Difference between enjoy and non-enjoy transaction
hi
can anybody tell me the difference between enjoy transaction and non-enjoy transactions
for example ME21N is enjoy transaction and ME21 isnt
we can do a BDC for ME21 and not for ME21N
basically, is it all transactions finishing with 'N' is enjoy transaction?Hi sia,
1 can anybody tell me the difference between enjoy transaction and non-enjoy transactions
The main difference, bcos we cannot do bdc is :
a) The enjoy transactions are based on
GUI Control (eg. Grid control based on class)
which are instantiated/created
on the front-end machine.
Hence, they cannot be accessed directly by code,
running on the application server.
(instead their value is set on the front-end)
Hence, we cannot do bdc on them.
regards,
amit m. -
Difference between Merchandising and Non Merchandising Article ?
Pls tell me the difference between of Merchandising and Non Merchandising Article with reference to SAP IS Retail System.
RegardsHi
There is no any term called Non Merchandising Article in IS RETAIL
Any article data we create in retail in MM41 t code has to be assigned to a Merchandise category
Article master is the back bone of Retail and you cannot create any article without Merchandise category
Merchandise category is the grouping of articles of similar kind which is the same as material group in R3
Hope it clarifies your doubt
Pls repost if you have any specific doubts
Regards
Raja
Edited by: ramanathan raja on Nov 19, 2008 5:31 PM
Maybe you are looking for
-
HT2731 how can I change my bank account information on IOS on iphone4s
got a replacment phone and it wont accept my security code for my bank card i can't download anything
-
What happened to the "Group Gripper" in CC 2014?
This thing in the upper right hand corner of grouped panels used to let you move all the tabs at once time. It was super helpful for redocking a group of panels in a floating window into another window. Now if you want to dock the panels again you ha
-
I have recentley purchased a new imac. I have been trying to load my Photoshop v10 CS3 on to it, since i got it, however, once the I enter the CD, the Software shows up with all the relevant information to install! BUT the "SETUP" icon shows as a bla
-
Powershell: Empty Folder Cleanup of Multiple Accounts
My apologies if this is not the correct subforum. I work in a heavily automated environment that uses Exchange in its document processing tasks. Emails get sent to folders, then read from them and further processed, then archived. This results in
-
I want to skip some html code part when refersh the page, how can we know
Hi, i want to skip some html code part when refersh the page, how can we know when we pressed refresh button or F5 key thanks in advance....