ThermoVision Labview Digital Toolkit for connection with a FLIR SC645 is not working

Can somebody help me?
I have troubles connecting my FLIR SC 645 with my Labview Software.
The “FLIR R&D Software” works fine I can make a connection with the camera over Ethernet, I can take images and read temperatures.
Now I want to use the labview toolkit to automate the measurement in a production process.
So the camera is connected over a Ethernet port directly to the PC.
I can see the camera in NI MAX under NI-IMAQdx Devices. If I try to snap a image a error occurs:
Error 0xBFF69031 The system did not receive a test pack from the camera.
The package may be to long or a firewall may be enabled.
When I dig in the libraries of ThermoVIsion I found the “ThermoVision Cam Ctrl.vit”. This program does work, it connects to the camera and I can do a internal calibration and some focusing but that is it. The examples from Thermovision does give me a black image and a Error -1.
Does anyone has some experience with this toolkit?
The main idée I had is to inport the image into a vision builder and their work with some intensity levels. Is this possible? And how do I connect with the camera?
Hendrikx Danny

Hello,
usually IR cameras have dfferent pallete displays (monochrome, rainbow, saturation, etc...). The default is probably monochrome, that is why you are seeing it. You should be able to change the output by sending the appropriate command to the camera.
Regarding the jumbo frames (I suggest that you leave this alone, if you get your camera working):
let me google it for you
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

Similar Messages

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

Hi, My Lightroom CC is showing waiting for connection and the mobile sync is not working. I have tried deleteing lrsync data, disabling firewall, checked host file etc. Still no luck.

I had the same problem. It fixed itself when I opened Internet Explorer (I don't normally use it). I was opening Support Portal to get some support help, but I'm not sure if it was the page or simply opening IE that did the trick.

ITouch 4 connect with USB/MIDI Music/keyboard not working .

!Sorry for my very bad english !!
hello ,
I have problem with connect my - iTouch 4 (os: 4.3.3 ) with AKAI musical keyboard
LPK25 / USB-MIDI controller - not working. not function. not sound ..
1/ when i use my LPK25 Midi Keyboard   connect with my PC   (WIN XP )
with standard cable USB - and Musical Software , it is OK. NO problem
USB/MIDI   interface LPK to PC ok. I play like piano ..synthe...
2/ when i use my iTOUCH4 ( os: Firm 4.3 )   connected with my Akai LPK25 Keyboard :
- cable : 30 pin (side iTouch4 ) and   miniUSB (side AKAI LPK25)
- Musical software Music Midi   iTouch : Music Studio, Nano Studio, or Soft SyntheStation *
Not function. NOT working. no possible play , not sound.
No possible use this keyboard in USB/MIDI connexion ,
I confirm : * this Apps : Music   are Itouch apps of ITunes Store WITH   function MIDI in setup !,
i active Midi in setup .... but never sucess..
QUESTION : wy iTOUCH4 not accept this connexion ?
Thank you for your assistance.

hi, thank you.
AKAI (manufacturer USB/MIDI Keyboard LPK25 ) web site AKAI   write " goto iTunes "
for download App SynthStation   Iphone/iTunes ..
but no function .
I have send mail to AKAI /Service !!!! no news ...
gertou

What is the driver name to be given for connecting with an MSAccess database?

I tried the 32bitODBC test on the MSAccess database. Works fine. My loaded java program trying to connect with the database is still not working. NullPointerException runtime error.
Maybe the driver that I've loaded is wrong viz. sun.jdbc.odbc.JdbcOdbcDriver.
What is the correct drivername to be given in class.forname("driverName")?
Any clues?

what u've given as the driver name is correct. The NullPointerException comes because of problems with passing parameters from the front end to the database. It's receiving null parameter values. Check the parameters u r passing to the database. I think this will solve the problem.

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

What cable type for connecting with gigabit port

What kind of lan cable that I should use for connecting with gigabit port from Time Capsule to get the fastest transfer rate. And what is the maximum rate MB/sec that could be?

You can use CAT5 or CAT6.
max transfer rate is:
Fast Ethernet has a theoretical speed of 100 Mbits/sec (12 MB/sec), while Gigabit Ethernet has a theoretical speed of 1000 Mbits/sec (120 MB/sec). That suggests a double speed advantage of Gigabit Ethernet over USB (60 MB/sec), but neither protocol hits its maximum. In reality, a typical USB connected disk is roughly equal to or lesser than the throughput of a shared drive attached over a Gigabit Ethernet network.
Over wireless network:
- 802.11b has a theoretical speed maximum of 11 Mbits/sec with a typical transfer rate of around 4.5 Mbits/sec (0.5 MB/sec) with an ideal signal.
- 802.11g has a theoretical speed maximum of 54 Mbits/sec, with a typical transfer rate of around 23 Mbits/sec (2.5 MB/sec) with an ideal signal.
- 802.11n has a theoretical speed maximum of 300 Mbits/sec, with a typical transfer rate of around 74 Mbits/sec (9.25 MB/sec) with an ideal signal.

My 4th gen. shuffle keeps on sending me an error message that it cannot connect with iTunes because it's not formatted properly.

Hi,
About two days ago my shuffle started to send me an error message that it cannot connect with iTunes because it's not formated properly.
So I've already updated the softwer, I tried to use it with every single USB port on my computer and searched for solutions on the net but couldn't find any useful information...
I literally see the following message: The iPod "194" cannot be used with iTunes because it is not formatted properly.
Any ideas?....
Thank you!

If you cannot access the iPad because of the passcode, you have no choice but to restore it using the same steps that you would use if you forgot the passcode.
iOS: Forgotten passcode or device disabled after entering ...

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

Kowhai wrote:
Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

HT201412 phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

ThermoVisi​on Labview Digital Toolkit for connection with a FLIR SC645 is not working

Similar Messages

Maybe you are looking for

ThermoVision Labview Digital Toolkit for connection with a FLIR SC645 is not working