These power settings will kill your keyboard dock

This scenario will kill the power in your keyboard dock, rendering it lifeless:
* Go to the "Lenovo Settings" Windows 8 app
* Enable "30 Day Standby" (may not matter)
* "Battery Stretch" On or Off (doesn't matter)
* Go to "Battery Health Mode" and choose "Automatically optimize for battery life"
Leave your laptop plugged in for a few hours. Battery #2 (the keyboard portion of your Helix) will drain to 0%, and won't resume charging on its own.
At first, I thought my Helix keyboard had lived a really short life. But it turns out you can go back to "Battery Health Mode", change the option to "Always fully charge" and then close the lid to make the Helix sleep. Eventually, your Helix will recognize that Battery #2 is dead and start charging it again.
This is obviously a problem with the software, and should be able to be resolved easily by Lenovo once they see this message. Please comment on this post to draw attention to the matter.
Thanks!

Hi,
We are aware of this problem where the setting for "Battery Health Mode" does not work in the following case:
1. the setting is changed while the system is undocked
2. then, the system is docked.
The dock battery will not know that the setting for "Battery Health Mode" has been changed.
The work-around is to toggle the setting for "Battery Health Mode" while the system is docked, as you noted.

Similar Messages

Any one had problems with IPOD Nano getting wet from sweating while exercising. It will kill your Ipod so beware.

Ipod nano will stop operating if it gets wet from sweating while exercising. Beware, sweat will kill your nano and apple will not cover it under warranty. So don't let it get wet.

Sweat bands works!

Power Nap and Safe Sleep "incompatibility" will KILL your SSD ?!

Hi!
This is a common pmset -g output from a ivy bridge Retina 15':
Barfly-i7:~ syd$ pmset -g
Active Profiles:
Battery Power -1*
AC Power -1
Currently in use:
standbydelay         4200
standby              1
halfdim              1
hibernatefile        /var/vm/sleepimage
darkwakes            1
gpuswitch            2
disksleep            10
sleep                10
autopoweroffdelay    14400
hibernatemode        3
autopoweroff         1
ttyskeepawake        1
displaysleep         5
acwake               0
lidwake              1
Barfly-i7:~ syd$
PREAMBLE:
I was trying to figure out (like many others on the net) the real difference between "standbydelay" and "autopoweroff delay" and I made some test that showed something that could be a SSD-Killer bug for many mac owners. (please note: I still don't fully understand why you need the 14400 delay if the standby one comes firsts and does same thing). (note 2: Mr. pmset man page editor, is very "funny" to read "For your sake and mine, please don't use anything other 0, 3, or 25." in an official man page but you are not explaining the relevance of bits 3 and 4 with hybernate mode 25 and the use of them combined).
THE PROBLEM:
Because of "Safe Sleep" even when RAM is still refreshed when mac enters Stanby ( from Sleep mode also called Stop in the GUI - more mess ) the contents of the ram are written to disk in /var/vm/sleepimage. So when a power faiure happens ( low batt, batt is removed, etc.) nothing is lost. In theory if you don't lose your power source you will always resume from RAM.
Problem starts if you enable Power Nap / Darke wake. As you might have noticed when the mac wakes up every hour, every software was running is resumed ( not only apple specific tasks ). So you might find some trace in your syslog of programs not finding the net, for example.
During this period of time the file system will be written by softwares and they internal state will be modified, so every hour the sleepimage file HAS TO be updated and rewritten not to create a dicrepancy between filesystem and memory after wake up from disk.
by issuing this command, before closing my lid, I had the confirmation about that:
Barfly-i7:~ syd$ while true; do sleep 120; stat /var/vm/sleepimage; date; done > AppleSleepIsMess.log
that is the output:
Barfly-i7:~ syd$ cat fuckSleepMess.log
Gio 23 Ott 2014 13:25:43 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 13:35:17 2014" "Oct 23 13:35:17 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 14:26:44 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 14:26:45 2014" "Oct 23 14:26:45 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 14:28:44 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 15:28:59 2014" "Oct 23 15:28:59 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 15:30:20 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 16:31:13 2014" "Oct 23 16:31:13 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 16:31:59 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 17:33:27 2014" "Oct 23 17:33:27 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 17:33:39 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 17:33:27 2014" "Oct 23 17:33:27 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 17:35:39 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 18:35:42 2014" "Oct 23 18:35:42 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 18:37:18 CEST
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 19:37:56 2014" "Oct 23 19:37:56 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Gio 23 Ott 2014 19:38:59 CEST
Barfly-i7:~ syd$ stat /var/vm/sleepimage
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 22:23:30 2014" "Oct 23 22:23:30 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
Barfly-i7:~ syd$ stat /var/vm/sleepimage
16777218 28067575 ---------- 1 root wheel 0 1073741824 "Oct 23 13:35:17 2014" "Oct 23 22:23:30 2014" "Oct 23 22:23:30 2014" "Oct 23 13:35:17 2014" 4096 2097152 0 /var/vm/sleepimage
So it confirms that EVERY HOUR, after every wake up, the content of your ram is written to disk!!! I will try also with AC connected later today.
NOTE3: the stat output is: date of creation, modification, accesstime (no atime mount for me), attributes modification but the output format IS NOT written in the stat command manual making the man page useless. (we have another man ed here!)
Thanks to the hilarious writer of the pmset manpage we know that Hybernate mode 3 is using bits 0 and 1 so without bits 2 and 3 set there should not be any page out for memory footprint before hynernating. My MBPr shoud write 16GB not 1.0 !
Any comment, please?
Alex

Hi,
We are aware of this problem where the setting for "Battery Health Mode" does not work in the following case:
1. the setting is changed while the system is undocked
2. then, the system is docked.
The dock battery will not know that the setting for "Battery Health Mode" has been changed.
The work-around is to toggle the setting for "Battery Health Mode" while the system is docked, as you noted.

Mountain Lion will kill your wifi connection

This sucker do recognise my WiFi???

Sorry but it is very hard to understand what you are saying. Your sentences do not make any sense.
If you have an issue describe it in more detail and maybe someone here can help you.
With 4 million downloads of Mountain Lion I suspect there are very few who are having problems.

Upgrading from FMS_4_5_0_r297 to FMS_4_5_1_r484 using ffmpeg will kill recording append ability

I would like to warn anyone using ffmpeg that upgrading to FMS_4_5_1_r484 will kill your append recording.
As discussed in http://forums.adobe.com/message/4280166 even fmle encoders are having problems appending recordings with absolute time enabled.
Reseting the recording with this query "adbe-live-event=croaporter&adbe-record-mode=record" or a change in your main.asc might be a solution for some but this will cause a disruption for clients connected to the stream.
For myself and I'm sure many others this is not a solution it seems like a bug. We need a solution that does not require a client to reset their browser page or client application which means overall disruptions in the viewer experience.
I can vouch that in FMS_4_5_0_r297 appending to a recording was done seemlessly on a 24/7 stream (and i have over 30 streams running). Sometimes for some reason an encoder will attempt to republish or will require a flush (forced restart) and with FMS_4_5_1_r484 this is not possible. Yes you can start a new recording but what happened to appending the recording, it was working.
I have tried to insert into the Event.xml a maxrestartage and removed absolute time code from Application but it will not work.
I dont know if FFmpeg has absolute time code implemented in the librtmp libraries to emulate fmle time synchronisation but even fmle users have this problem so I believe that this should be fixed in the next upgrade but for now I suggest all others who want to use a more efficient encoder such as ffmpeg as compared to fmle to be very careful when upgrading.
I did notice some new hls buffering issues that have arised from this new upgrade as well which 4.5.0 didnt have.
I am even willing to pay for support to solve this problem because 4.5.1 seems to have better monitoring in the administration console. But for now I am downgrading to FMS_4_5_0_r297 because it works.
Regards
Bashir

ffmpeg -i rtp://239.255.0.1:4444 -acodec libfaac -vcodec libx264 -vb 1124k -ab 128k -r 25 -async 1 -bf 4 -refs 2 -aspect 16:9 -g 45 -deinterlace -f flv rtmp://192.168.100.150/devtest/devtest1?adbe-live-event=devtest1
ffmpeg git:
ffmpeg version git-2012-02-14-f89f9bd
built on Mar 22 2012 15:57:58 with gcc 4.6.1
(source is mpeg2 - mpegts 720 x 576) with ffmpeg you can copy the mpegts timecode with the -copyts option but that didnt help and I also tried -timestap now but no luck.
Thanks for your response.

Kerning Caution! It can kill your Motion file.

Kern carefully. There is a bug that can render your motion file un-openable!
I will describe it in detail here to see if anyone else can reproduce it. I was able to reproduce it consistently, even with a new file.
I wanted to adjust the beginning of a text line to closely line up to another text member. There are many ways to do this. In this instance I chose to kern the space before the first character of the text line in order to shift the entire line.
Don't do this! It will kill your motion file.
When I tried to render a movie (Share/Export Movie...) after making this adjustment, here is the error message.
I saved the file, hoping that restarting Motion would fix the problem. But the project file will not open.
Luckily I had a backup of the file. I did a bit of trouble shooting after this and found that this type of kerning would consistently kill the project file. This is a very nasty bug. There may be more like this so proceed with caution when kerning.

Hope you have reported this to Apple Tracy via the Motion Help menu to http://www.apple.com/feedback/motion.html
I will stay away from kerning for now, thanks for the heads up!

Fix for "your computer's system firewall settings will prevent you...?"

I finally did the dreaded feat and performed an update - had all kinds of problems afterwards (repeating Network settings message error, unknown error -3256 error, etc.) that I have (I think) successfully fixed thanks to these fabulous forums. After getting the -3256 error I updated the firmware and software for my AE and applied the Apple support fix for -3256. Then I started getting a new issue - being the following message after opening my new i-tunes version 8.0.2 "your computer's system firewall settings will prevent you from using Airtunes". After going into the firewall settings and trying to modify the port number (which I found suggested here) that i-tunes would use to stream to my airport express in the edit pane for 'i-tunes music sharing'. I ended up creating a new port specification, which I called i-tunes 1 with ports 5000 - 6000 specified. Tried opening i-tunes again - but no luck, same error. Thinking that I'd done nothing to improve the situation, I deleted my new port specification in the allow pane under firewall - I noticed that the original spec was gone (because I had edited it?). Anyway, as soon as I deleted the spec that I had edited, airtunes started working beautifully! To check things - I closed i-tunes and re-started, then, got the same message ""your computer's system firewall settings will prevent you from using Airtunes" with the option to check my firewall settings - which I did. This time, I noticed that 'i-tunes music streaming' was again listed as an option under allow in my firewall. I selected and deleted it - then again, my Airtunes works perfectly.
I really have no idea what exactly occurs 'behind the scenes' so to speak when you delete this from the list - but - it seems to have fixed my problem. I'm guessing that I'll have to do that each time I open i-tunes. At least I got my airtunes back. I guess I'm a little worried that deleting this item presents some sort of risk or could lead to another problem and so if anyone can comment on this I would really appreciate it. Alternatively, if anyone has a solution that won't require me deleting this item each time I open i-tunes, I'd be glad to hear it.
Thanks!
Leigh-Ann

Leigh-Ann, you didn't say that Airtunes didn't work, only that you got that error. I, too, am getting the "Your computer's system firewall settings will prevent you from using Airtunes" message, but when I click "Ignore" I find that Airtunes works just fine.

My IPad1 has completely shut down. It has no power. I have tried a restart and a reset with no results. I have tried charging through the keyboard dock, the wall charger and my Macbook Pro with no results. Is this a complete battery failure?

My IPad 1 has lost complete power. I have attempted a restart and a reset without results. I have attempted to charge with the keyboard dock, the wall charger and connecting to my MacBook Pro. Again no results just a black screen. Is this a battery failure? I am in Mexico for another 6 weeks and hoping to find a solution.

Cathi-
How long did you have the iPad connected to the wall charger? A completely dead iPad battery may not work until it has been charged for some time - maybe a half hour or more. I suggest leaving it on charge overnight, and then trying the reset.
The MacBook may be able to charge the iPad if it doesn't go to sleep, but it will be extremely slow. the Wall charger is definitely the best way.
Fred

Trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings

trying to update apps on iphone and getting error message, there is not enough available local storage to download these items. you can manage your local device storage usage in settings. What am I to do?

The storage you purchased is in the cloud, and doesn't do anything with your pad. Your problem is simply that you have too much content on your pad. Go to settings, general, usage, and it will show you how much space you have avaliable on your pad. If you let the screen sit for a while, all the apps will be displayed, and you can see how much stuff you have associated with each.
You have to no option but to delete some of the content on your pad. Videos, comics, pitcures and some music files use a lot of space. The cloud allows you to leave stuff there, so you can get it when you need it.

Your computer systems firewall settings will prevent you from using AirTune

I haven't used my airport express in a while and I just opened itunes with my airport speakers and I got the error message Your computer systems firewall settings will prevent you from using AirTunes. How can I fix this?
Help!!

I have this same exact problem and it is driving me crazy. I am running on OS X 10.4.11 and only started having this problem when I started using the express to join another network. I had always used it as the base but when I joined the wireless network I created with an airport extreme (just bought it a couple of days ago) I can still use the internet fine, and I can print wirelessly, but when I try to use the speakers wirelessly from iTunes it gives me that warning. I'ce tried opening up a whole bunch of ports on my computer but I have no clue how to correct whatever else needs correcting on the extreme.
APPLE! We need your help!

SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.

Hi,
I have VS2013 update 4 and IE11 installed. When I try to sign in through VS I get the following error.
SP324081: Check that your Internet Explorer security settings will allow JavaScript and cookies. If enabled, please contact support.
I have checked and JAVASCRIPT and cookies are enabled.
Any help is appreciated.

Hi Sath12,
If possible, I suggest you reset IE settings.
Please lower the security level. Then I added the site like https://*.visualstudio.com/ to the trusted zones. Test it again.
I have met this issue before which was related to the IE settings or the account issue.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/290948f6-b4ca-41e3-9888-91fbbc71cdeb/cannot-register-sign-in-from-vs-express-2013?forum=visualstudiogeneral
A connect report still shared some information about it:
https://connect.microsoft.com/VisualStudio/feedback/details/811860/vs-express-2013-for-web-browser-is-security-restricted-or-javascript-is-disabled
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The iPad keyboard dock, will it work with the 3gs/iPhone 4 when iOS 4?

When iOS 4 comes out?
I don't know wether this is considered as speculation or not but it is not intended to be. I want to know wether someone can confirm this or not.
Thanks.

A more important question you should ask is why you would prefer this to a bluetooth keyboard that will definitely work once iOS 4 is released. The keyboard dock has a limitation of only allowing the device to work in portrait mode. I would find this a little annoying with an iPad and entirely unacceptable with an iPhone. I have used keyboards with Palm and Pocket PC devices before and there are definitely times that you would rather switch to landscape mode.

Using iPad/keyboard dock combo in your lap

Hello all!
My ancient Windows laptop that we use as our secondary computer is dying, and we are seriously considering replacing it with an iPad. Something like 95 percent of the time, this computer is used by my wife, sitting in the recliner in our office, for Web surfing and light email -- in other words, pretty much exactly what the iPad is designed for.
It would sometimes be useful for her to have a real keyboard, though, since she sometimes uses the laptop to take notes at meetings or write longer emails that might get frustrating using the on-screen keyboard (she is a touch-typer). I am wondering how awkward it would be to use the iPad with the keyboard dock not on a solid surface, but sitting in a recliner or on a couch. I know the iPad is quite light but because of the keyboard plugs in in portrait mode it looks like it would be somewhat top-heavy in that configuration.
I know I will get responses here telling me that the iPad is not a laptop replacement and blah blah blah, to which I say pre-emptively: YES, I KNOW THIS. Like I said, virtually all of the use that it would see would be just what it's designed for. I'm sure that using the plug-in keyboard in one's lap would be more awkward than using a real laptop; I'm just trying to find out if it would be doable, so that the iPad wouldn't be completely useless in those scenarios.
Thanks in advance,
Josh

The connector on the Apple keyboard is of bad design. The leverage that the iPad places agains the dock connector tab on the keyboard (because it only docks to the keyboard in the portrait mode) puts too much stress on that connector tab.
I have had to have two keyboards replaced, because the connector tab came loose, and they have only been used on my desk.
Apple should have put a dock connector on the landscape side of the iPad itself (too) so that you could put the iPad into the keyboard in the landscape position, which would put less physical stress on the keyboard connector tab.
I could never imagine using the thing on my lap in the current embodiment.
This keyboard connection makes it almost impossible to use on an aircraft as well, and should be redesigned.

[HELIX] Black screen with HDMI over keyboard dock

Hi everyone, I just came across a weird issue with my Helix: When I connect my Helix including keyboard dock via HDMI to my TV the screen stays black. I checked following things: - Sound is working over TV - Screen connection is detected by Helix and also by TV (otherwise screen would be blue) - HDMI connection is working if I directly connect the tablet with the same adapter to the TV - RGB adapter is working fine also inclunding the dock I have the current driver and BIOS updates installed. Does anyone encounter the same issue or knows how to solve it? Might be either a driver or HW issue with the dock I suspect. Thanks for any input on this! Markus

If I do not use the Win-P or Ctrl-F7 key combination to change it to Duplicate Screen, then it may go automatically to "Second Screen only" which seems to be occurring in your situation.
If the setting wont change after the screen goes blank, then it could b a driver issue. If you opted the latest device driver like I did, and this still happens, I'd say it is a driver issue. However, when I made a presentation to day, it automatically switch to the proper "Duplicate setting" screen option. So perhaps yours is an intermittent problem.
Go to control Panel, Power Options, then Click on Windows Mobility Center at the bottom of the page. You will displays and toggles for External displays and for presenter mode right there. Click those to see if you get any changes. You can see if your computer thinks a second screen is attached or not, and it you are in projection mode or not.
Does the computer go back to normal after disengaging the HDMI? If so, set it to duplicate screens and then re-connect it, if the screen goes dark there must be another setting that is off.
If you are using the WiDi software that might also be the culprit, check those settings. Hope this helps in some way.
I discovered on mine that I could run a Powerpoint presentation fine, but when I try to switch over into presenting a movie clip or website, it would only show my screen saver. I still needed to use the Win-P or Cntrl-F7 key toggle to send the signal for those applications. Just seems weird, it just an idiosyncrasy I gather.

[865PE/G Neo2 Series] Memory timings and power settings anyone?

I'm not very good with computers, so I've just played around with the timings on my memory, but have not found one stable setting as of yet.
The memory is brand new and I've tested it for errors on my brothers computer and there's nothing wrong there.
Intensive harddrive usage, dvd playing and intense downloading while listening to music are sure ways to crash my system. "..........Not less or equal" is the most common error message, but there are
many many more.
Oh, maybe I should point out that overheating's not an issue, cause I've good fans and run my computer without sidepanels.
I also like to say that I have the first generation of p4 with ht and 533fsb.
I'm sure there's something I forgot to mention but here below I'll paste the system summary that Sandra gave me.
Would be forever grateful if someone could help me out with the memory timings and power settings for my board. Setting it to "auto by spd" gives me a very unstable system, so no avail there.
I'm running the mem at 2.70 and sometimes at 2.65, since these two settings seem to be the ones with least crashes.
The Memory installed are 4*512mb ,kingston 512 kvr333x64c25 pc2700
The PSU is a Tagan "TG480-u01" 480w
Many many thanks in advance guys.
SiSoftware Sandra
Processor
Model : Intel(R) Pentium(R) 4 CPU 3.06GHz
Speed : 3.10GHz
Performance Rating : PR4118 (estimated)
Cores per Processor : 1 Unit(s)
Threads per Core : 2 Unit(s)
Internal Data Cache : 8kB Synchronous, Write-Thru, 4-way set, 64 byte line size
L2 On-board Cache : 512kB ECC Synchronous, ATC, 8-way set, 64 byte line size, 2 lines per sector
Mainboard
Bus(es) : ISA AGP PCI IMB USB FireWire/1394 i2c/SMBus
MP Support : 1 Processor(s)
MP APIC : Yes
System BIOS : American Megatrends Inc. V2.5
System : MICRO-STAR INC. MS-6728
Mainboard : MICRO-STAR INC. MS-6728
Total Memory : 2GB DDR-SDRAM
Chipset 1
Model : Micro-Star International Co Ltd (MSI) 82865G/PE/P, 82848P DRAM Controller / Host-Hub Interface
Front Side Bus Speed : 4x 135MHz (540MHz data rate)
Total Memory : 2GB DDR-SDRAM
Memory Bus Speed : 2x 168MHz (336MHz data rate)
Video System
Monitor/Panel : Iiyama A201HT VisionMaster Pro 510
Adapter : RADEON X800 Series
Adapter : RADEON X800 Series Secondary
Imaging Device : CanoScan FB630U/FB636U #2
Imaging Device : Video Blaster WebCam 3/WebCam Plus (WDM) #2
Physical Storage Devices
Removable Drive : Diskettenhet
Hard Disk : ST3160023AS (149GB)
Hard Disk : WDC WD1000BB-00CAA0 (93GB)
Hard Disk : WDC WD1200JB-00CRA1 (112GB)
Hard Disk : FUJITSU MPG3409AT E SCSI Disk Device (38GB)
CD-ROM/DVD : PHILIPS DVDR1640P (CD 63X Rd, 63X Wr) (DVD 8X Rd, 8X Wr)
CD-ROM/DVD : PLEXTOR CD-R PX-W4824A (CD 40X Rd, 48X Wr)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
CD-ROM/DVD : AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd) (DVD 4X Rd)
Logical Storage Devices
1.44MB 3.5" (A:) : N/A
Hard Disk (C:) : 149GB (101GB, 67% Free Space) (NTFS)
Xp (D:) : 112GB (2.1GB, 2% Free Space) (NTFS)
Big (E:) : 93GB (9GB, 10% Free Space) (NTFS)
Jimjimjim (F:) : 38GB (2.1GB, 5% Free Space) (NTFS)
Bologna_2 (G:) : 3.9GB (UDF)
CD-ROM/DVD (H:) : N/A
Bfv_3 (I:) : 486MB (CDFS)
Doom 3 roe (J:) : 650MB (CDFS)
Sims2ep1_1 (K:) : 650MB (CDFS)
Bf2 dvd (L:) : 1.9GB (UDF)
CD-ROM/DVD (M:) : N/A
Peripherals
Serial/Parallel Port(s) : 1 COM / 0 LPT
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D2
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D4
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24D7
USB Controller/Hub : Intel(R) 82801EB USB2 Enhanced Host Controller - 24DD
USB Controller/Hub : Intel(R) 82801EB USB Universal Host Controller - 24DE
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-rotnav (hub)
USB Controller/Hub : USB-enhet (sammansatt)
USB Controller/Hub : Stöd för USB-skrivarport
FireWire/1394 Controller/Hub : OHCI-kompatibel IEEE 1394-värdstyrenhet
Keyboard : Logitech HID-Compliant Keyboard
Keyboard : HID-tangentbordsenhet
Mouse : HID-compliant MX310 Optical Mouse
Mouse : HID-kompatibel mus
Mouse : HID-kompatibel mus
Human Interface : Logitech WingMan Force 3D USB (HID)
Human Interface : HID-kompatible konsumentkontrollenhet
Human Interface : HID-kompatibel enhet
Human Interface : Logitech Virtual Hid Device
Human Interface : Logitech Virtual Hid Device
Human Interface : Logitech USB MX310 Optical Mouse
Human Interface : Logitech WingMan Force 3D USB
Human Interface : USB HID (Human Interface Device)
Human Interface : Internet Keys USB
MultiMedia Device(s)
Device : Audigy X YouP-PAX A4 v1.00 Audio Driver(WDM)
Device : Creative Game Port
Device : Pinnacle PCTV Stereo PAL Capture Device
Printers and Faxes
Model : Microsoft Office Document Image Writer
Model : Canon PIXMA iP4000
Model : Adobe PDF
Power Management
AC Line Status : On-Line
Operating System(s)
Windows System : Microsoft Windows XP/2002 Professional (Win32 x86) 5.01.2600 (Service Pack 2)
Network Services
Adapter : Intel(R) PRO/1000 MT Desktop Adapter #2

Thanks for your answers.
Danny: 1. Yes, I've put my memory in my brothers computer, and ran memtest there, and it came out ok, but on mine it crashes almost instantly.
2. Yea, I have 2 fans blowing into the case and one out, so airflow is good, cpu is also cool and seems to be happy ;-)
Geps: I can't say I understand all these numbers but there are som specs here as an example, Tagan TG480-U01 480W ATX
I can't imagine that this psu ain't enough, and if so.....I've been had by the dealer.

These power settings will kill your keyboard dock

Similar Messages

Maybe you are looking for