Thesis Help components.tld

I am just trying to be a JSF writer, and my thesis is a DoubleTab just like the format in apple.com
I use the samples SUN supplied.Jsf-components.and there is a sample could be used, but I dont know the reason that component.tld is not registered in the web.xml ,but it still works.
Ｎｏｔ　Ｆａｍｉｌｉａｒ　ｗｉｔｈ　ｉｔ．ｔｈａｎｋｓ.

You may want to go thru just once..
http://www.samlsecurity.com/components.html
.tld files are put under WEB-INF directly so need for registering them in web.xml

Similar Messages

Dissertation/Thesis Help Writing Service(+91-9999076997)

Dissertation Help , Thesis Help, Research work assistance, Dissertation Writing Service, UK,US, Australia Research Projects, UK Dissertations/Assignments. Fast, Cheap, Help from India Contact +91-9999076997.

best help for dissertation

Are these help forums still available to us once our 1st year, post-buy of Dreamweaver CS-5 expires?

Might anyone here know if these help forums are still available to us once our first year, post-purchase of Dreamweaver CS-5, has expired?

The forums are free public user-to-user forums for anyone to use.
They have nothing to do with Adobe CS Live Services for which Adobe is trying to get some traction in the marketplace by offering free 12 month subscriptions to CS5 customers
http://www.adobe.com/products/creativesuite/cslive/
I've never used CS Live. Don't know if I will.
By contrast, I've used these forums for many years and will continue to do so.

Help- Components Throwing Compile Errors

Thank you for reading my issue. I am using Flash CS3.
Recently, all my projects began throwing compile errors for
standard component AS3 code.
UI Component, FLVPlayback.
I have uninstalled and reinstalled Flash CS3, but to no
avail. Problem persists
I keep getting errors involving "QNAN", which I think
involves trapping for a non-numeric value, or something.
As a test, I created a new Flash doc, placed an instance of
FLVPlayback on the stage, pointed it to a .FLV file in the same
directory.
Errors on compile:
1093: Syntax error.
1084: Syntax error: expecting rightparen before QNAN.
1093: Syntax error.
1084: Syntax error: expecting rightparen before QNAN.
And so on, I get 5 sets of the same errors for different
functions.
The first offending function above reads:
function queueCmd(param1:VideoPlayerState, param2:Number,
param3:Number = 1.#QNAN) : void
if (param1.cmdQueue == null)
param1.cmdQueue = new Array();
}// end if
param1.cmdQueue.push(new QueuedCommand(param2, null, false,
param3));
return;
}// end function
I get similar errors from my UI component AS3 as well.
I have not touched the shipped AS3 for these components. What
gives?
Any ideas?
Thanks
Tim

Thanks, by the way to everyone who has offered thoughts so
far.
xchanin - I've encountered issues with the FLVPlayback
component as well as various of the UI components.
I tried some example applications (from the web) not too long
ago and this issue popped up shortly there after.
But, I'm having issues with even a simple Flash with a single
FLVPlayback instance and one .flv.
There is nothing in the class path for my test file and the
root .as files open from the Flash install when I click the compile
errors in the output window.
So, it really looks like I somehow corrupted those files. I
read a post somewhere that someone had "strange invisible
characters" show up in their .as that were throwing errors.
I thought a clean install would do the trick.
I may completely isolate the example files I was using and
try another reinstall... that's about all I can think of at the
moment.
This has been a couple week search for a solution. I have a
real project coming up an need to solve this.
Thanks for any input! (I assume I can't call Adobe for an
assist as I'm still on CS3 ;)
Tim

So cannot load websites that other programs can includes Mozillas help pages!!! my first issue was with Linked IN but now these help pages dont work either

I cannot log in to LINKED IN via firefox . however I can with IE8. why? also when I click teh Firefox wont open pages that other pbrowsers will I get a firfox cannot open the page message. I hope this is a joke!!! Hah hah

When this occurs it's usually because a proxy is set in the Network preference pane when one isn't needed or vice-versa.
Firefox uses its own proxy settings and as such doesn't rely on the settings in System Preferences.

Still e mails after i clicked to stop these HELP

I ticked the box not wanting to receive any email still I got flooded with Emails How is that possible?
If you stopped wanting to receive emails is there a time delay? I am gettin overflown while I do not want that !

I have finally figured out that you have to go to your profile and ther I found the option to cancel all mail.
The selection I have filled in earlier did not work and I am very sad about that.Your advices make no sense why should one take his e-mail account of line? Certainly not me as I receive other messages than from Apple form.I have used this medium before and everything was all clear and easy to find.Why there are different places to cancel mail notices is not clear to me.To just state
quote.
You can set to receive messages manually when you want them. Mail>Preferences>General.
unquote.
No mentioning about where you mean and I now discovered it is to your PROFILE.
Why you did not mentioned that is unclear to me.But I regard your advise as far below the good standards I received from others in the past.
quote
You can set to receive messages manually when you want them. Mail>Preferences>General.
unquote.
This is the limit Who can be so I do not say the word to advise like this.
Glad that I found it all out myself.
Clogz14 very happy to be relieved from this silly flood of messages I could not stop .
Very sad this forum has become very unclear wher to go and how to do.
FROFILE is the place to cancel all messages and YOU DID NOT know!
clogz14

Help! Why am i getting these JavaScript errors in Dreaweaver and how can I fix it???

This only happens whenever I try to access code view, and it won't allow me to add any more code. This is the error message I get:
"While executing DWMenu_View_Text command in menus.xml, the following JavaScript error(s) occurred:
Exception thrown in native function"
A third party tried to access my site, but the page froze, with an error message:
"Script error on line........."
I'm not sure if this has something to do with FileZilla, but now when I try to open it, I get number of error messages about, "failed to write xml file" and "Application Data\FileZilla\filezilla.xml (error 5: access is denied.)"
I've tried deleting the WinFileCache from Dreamweaver and disabled all extensions, but none of these helped.
Please help. does anyone know what's going on?

I've never heard of a Filezilla DW extension, but this is the KB article for you:
http://kb2.adobe.com/cps/405/kb405604.html

DID YOU KNOW?? - ABOUT ADVANCED COMPONENTS IN THE PALETTE??

 
Hi All,
DID YOU KNOW??
The IDE ships with the following Advanced Components in the Palette.
These advanced components are a set of JavaServer Page markup tags for advanced users. The components have no visual appearance and are useful to developers with experience in JSP and JavaServer Faces technologies.
* Encoding
* Faces Action Listener
* Faces Converter
* Faces Validator
* Faces Value Change Listener
* Faces Verbatim
* Link
* Load Bundle
* Markup
* Meta
* Parameter
* Script
Lets look at MARKUP component in more detail.
The MARKUP Component
You can drag the Markup component Markup component icon from the Palette's Advanced category to the Visual Designer to create a standard HTML tag. The Markup component enables you to insert HTML elements into the JSP page in places that HTML is not permitted.
When you drop this component on a page in the Visual Designer, you cannot see it on the page until you set the tag property. You can see it in the Outline window and you can select it there to edit its properties in the Properties window.
Use the tag property to specify the type of HTML element to insert. For instance, to insert an <hr> tag, set the tag property to hr with no angle brackets and select the singleton property .
To provide compliance with XHTML, if the HTML element you are inserting is a singleton element, you must specify the singleton property, which causes a trailing /> to be generated in the rendered HTML. For example, the element is a singleton element that must be rendered as
to make it XHTML compliant.
If you want to specify HTML attributes in addition to id and style for the element you are inserting, use the extraAttributes property.
Learn more :-
http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/help/2update1/components/advanced_list.html
We would like to know the following from you :-
1) Are you using these Advanced Components in applications you are building? If so How and Where?
2) Did you face any challenges while using them?
3) Did you find any special usages/scenarios for using these components?
Thanks for all your inputs and for joining in the discussion.
K


What would you like in the documentation? Do you have specific questions about particular components? Do you want examples? What's missing from the online help at http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/help/2update1/components/advanced_list.html?

Issue with SSIS Custom Components - 64 bit SQL 2012

Hello All,
Our SSIS packages built on SQL 2008 R2 make use of some custom components. These custom components are installed as part of an MSI. The dll's are copied over to the Windows/assemble [GAC Folder] and also to the Program Files(x86)/SQL Server/110/DTS/* folder.
The installation does not copy the dll's to the 64 bit program files folder.
X:\Program Files\Microsoft SQL Server\110\DTS
These packages are executed via SQL Agent jobs on a 64 bit SQL server and there does not seem be any issue.
Now we are upgrading our servers to SQL 2012 and we have a new installer for the custom components as well. The new custom components use .NET Framework 4.0 and when installed the dll files get copied over to the Ms.NET 32 bit runtime GAC folder and also
to the SQL Server DTS Folder in x86. The upgraded packages work only when we set the runtime mode to 32 bit. The packages successfully executes within the 32 bit dtexec utility, but when we try to run the same package using a 64 bit dtexec utility the
process errors out with a component failed to load message. The package moves data between two SQL Server instances.
The custom components have always been built for 32 bit runtime. I can run a older package through the dtexec utility (from the 64 bit folder in program files) and it does work without any issues. After the upgrade the package will only execute on
a 32 bit utility. can someone help me understand this issue?
Regards, Dinesh

Thank you Arthur.
i think we got the answer as well, as the .NET framework 3.0 installer copied the files over to the C:\windows assembly the dtexec utility [32 bit/64 bit] was able to load the components.
Now with the new installer the files are copied to specific runtime gac folders as Arthur has mentioned. The 64 bit utility does not find the dlls in the GAC whereas the 32 bit version will find them.
Regards, Dinesh

Every time I open iMovie, the program doesn't respond. The Wheel comes up and I have to force quit. Can anyone help me figure this out so I can work on projects? if it helps, I'm running OS 10.5.8

Hi, My iMovie program stops responding upon opening. I can't figure it out. I haven't really used it in the past but I would like to start. My Mac is one of those aluminum Macbooks that look like a macbook pro and were on the market for a little bit. I'm running OS 10.5.8 and its on the most recent update for the operating system. I don't know how to correct the glitch. Any help would be great! Thanks
-E

OK, you have iMovie 08, which is also known is iMovie Version 7.1.4. It has been a few years since i used this version, so this is based on memory.
The only components you must have in the Library/QuickTime folder are the AppleIntermediateCodec.component and the AppleMPEG2Codec.component.
All the others could potentially be causing problems. I would drag the DivX components, the Flip4Mac components, and the Google Camera components to the Desktop temporarily, so nothing is left in this folder except the two Apple components.
Then restart your Mac and start iMovie. If it works, yay!
If you still need these other components for some other app, you can probably get updated DivX components for free at Perian.org.
You can get updated Flip4Mac components by running WMV Player and updating. It should prompt you to update automatically.
I am not sure about the Google components, but if you are running something that needs them, it should prompt you to install the current versions.
If none of that works, post back.

How do I properly setup pin and gate swap groups on new components?

Hi,
I've looked for some documentation explaining exactly how the pin and gate swap functionality works but I have not been successful.
I am trying to get pin and gate swapping working correctly on some digital logic components that I have created (side question - why no modern 74 series logic components like LVC?) as well as RPACKS and some connectors.
Is it a requirement to create a multi-section symbol to enable gate swapping? I can't seem to get it to work unless the symbol has multiple sections. It doesn't work by default for the RPACKs included in Multisim. If it's possible to do gate swapping by putting the pins of each gate in their own gate swap group I would really like to understand what I'm doing wrong.
In the Component Properties 'Footprint' tab you can define the 'Pin swap group' and 'Gate swap group' settings. I have not seen any documentation explaining this and frankly, I'm quite confused by it when using existing 74 series parts as examples. The single section symbols don't have any pin swap or gate swap groups defined and the multisection symbols have only one gate swap group and then put all inputs in one pin swap group and all outputs in another pin swap group.
I would really appreciate it if someone could point me to documentation that explains how to do this. The help files are quite poor in my opinion - they seem to only be able to point out the obvious. The 'Getting Started,' 'Fundamentals,' etc. type guides don't mention this stuff at all. The 'User Guide/Manual' (both of which appear to be outdated?) do not explain this and frankly don't have very much information about pin and gate swapping at all.
I'm hoping I'm just missing something obvious.
On a related note - I'm having some trouble working with some of these multisection components. When I want to change the footprint or update the component after making a change to the component in the database I can't seem to find a quick way to do this. It seems that I always have to go through a drawn out process of 'Replacing' each individual symbol section. Is there a faster way to do this?
Thanks,
Kleven

Hi Pat,
I'm working with some SAMTEC connectors. I don't expect you guys to have these built by default in the library - they are somewhat custom. But just so you can consider it, we are using the TFM and T2M family of connectors and I'm adding them as additional footprints for the standard dual row headers. I'm having some trouble with the footprint for the TFM screw-down option since it is a very odd footprint, but I'm going to start a seperate thread discussion for that since I really just need to understand how to manipulate Ultiboard to get the desired result and it's really a different discussion.
As for RPACKs, I'm a little confused about how Multisim currently supports these. The Value tab in the properties dialog only lets you set the resistance. Why isn't this more like the resistor value tab? Since the Value tab is modified like a virtual component it's disappointing that it doesn't offer more capability like the other virtual passives. In my limited experience I've seen the isolated-4 resistor pack used the most, but like I said, that is limited experience. It would be nice if some surface mount footprints were added to the master database for RPACKs in the future. 4x0402, 4x0603, and 4x0805, concave and convex, seem like pretty common footprints as best I can tell.
Virtual components work great in a purely physical design because you can easily change the footprint in the 'Value' property tab. With the provided RPACKs and LEDs you can't do that, so I had to create new components in the User/Corporate database. Of course, the LED can't be copied so I had to create it from scratch. But the RPACK could be copied even though it had a modified Value tab, implying it is a virtual component, if I understand correctly. Maybe these distinctions and limitations are well defined but I found it somewhat confusing that there were several common parts I had to either copy and modify or build from scratch.
Since I created those parts, we updated to the PowerPro version and though I'm not certain, I think I can change the footprint in the spreadsheet view. But in the standard version, I didn't see a way to change the footprint without replacing the component.
Also, it seems like changing the footprint does not behave quite like I would expect. If I have a database part which has multiple footprints mapped already, I would expect to be able to choose between those footprints already supported by the database part when I try to change the footprint using the Properties->Value tab or the spreadsheet view. If I need to change to a footprint that currently is not associated with the component in the database, I would expect to have to edit the database part, add the footprint, map the pins, re-save the component, then update the component in the schematic.
Is my thought process making too many assumptions here? I understand that I am one person creating one design in one specific way. So I'm sure I'm missing some usage cases or intended uses of the tool, especially since I haven't taken any training for this software and have tried to teach myself how to use it over the last 9 months. And I have noticed that even for virtual resistors and capacitors, the footprint selection dialog is the same - a selection from the database and setting up a new pin mapping.
As for 74 series parts, seeing the LVC family would be very nice. This is 3.3V-2.5V and seems like the next logical step for lower voltage support. It would also be nice to see some surface mount footprints with the 74 series parts. This isn't a big deal though - it didn't take me long to create the parts I needed by copying and editing from the Master database. And since I'm not using the simulation models, that made it even easier. Since I haven't looked into the models at all, I don't know if that would have taken longer to convert to the LVC family.
I've probably rambled enough for now.
Thanks!
Kleven

When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)" I have installed the latest version of iTunes but still get this message. Can anyone help.

When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?

Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M.

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o SAP Logon Control
o SAP Function Control
o Librfc32.dll
o Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
 'SAP Logon control - object for creating connections to an SAP system
 Dim objSAPLogonCtrl As Object
 'SAP connection object
 Dim objConnection As Object
 'Object that will represent the SAP function called
 Dim objSAP As Object
 'SAP function control object - object factory for creating other SAP function objects
 Dim objFuncCtrl As Object
 'Create instance of an SAP logon conrol
 Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
 'Create a connection object
 Set objConnection = objSAPLogonCtrl.NewConnection
 'Define connecion parameters
 objConnection.ApplicationServer = "sapvm"
 objConnection.SystemNumber = "00"
 objConnection.Client = "800"
 objConnection.User = "iissap"
 objConnection.Password = "tstadm"
 objConnection.Language = "E"
 objConnection.TraceLevel = 10
 'call the logon method of the connection object
 If objConnection.Logon(0, True) = False Then
 MsgBox Error
 Exit Sub
 End If
 'Create an instance of the SAP Function control object
 Set objFuncCtrl = CreateObject("SAP.Functions")
 'Set the function control connection object
 Set objFuncCtrl.Connection = objConnection
 'Function name to be generated and called
 Dim strFunction As String
 strFunction = "ARCHIV_PROCESS_RFCINPUT"
 'Create an instance of the function defined in strFunction
 Set objworkflow = objFuncCtrl.Add(strFunction)
 If objworkflow Is Nothing Then
 MsgBox "Could not create object " & strFunction
 Else
 MsgBox strFunction & " object created."
 End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed


Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

Help required in exploring collaboration feature

Hi All,
I am a newbie in oracle BPM, wanted to explore collaboration feature in oracle soa suite 11.1.1.7 version.
followed the document as on http://www.oracle.com/us/products/oracle-bpm-11g-report11117-1908473.pdf
I need help in exploring the feature as per the screenshot on page no 12 on the above document.
feature: the left dashlet where written: *"Members, James Cooper Participant ..."*.
Please help.
Thanks in advance

Hi Siva,
Firstly get the complete details of the collabration ,what it does ,why it is used and how the configurations are made ,i am provding you the maximum information hope it would help you any more queries get back with reply.
Collaboration Launch Pad (CLP) allows portal users to manage their contacts and launch services for collaboration. Users use a link in the tool area of the masthead to launch the CLP,then activate clp and Activate the technical component Real-Time Collaboration (RTC).
RTC provide the standard services instant messaging and application sharing.
With these technical components, you also activate the Real-Time Messaging Framework (RTMF). In the portal, the RTMF is the technical infrastructure for transferring real-time event between servers and clients.
so, After installing the Collaboration component in SAP NetWeaver, you need to complete a number of configuration steps in order to fully implement Real-Time Collaboration (RTC) in the portal. RTC provides both application sharing and instant messaging in the portal.
for the steps You can look into these steps which would help you :
http://help.sap.com/saphelp_nw70/helpdata/en/07/3d9b40e8192a54e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/07/3d9b40e8192a54e10000000a1550b0/frameset.htm
Thanks&Regards,
Aswinchandra Girmaji

How to deploy a simple .jar (containing Helper classes) in Weblogic?

Hi,
I have created multiple .jar files.
1) MDB.jar containing all my MDB classes.
2) Bean.jar containing all my Session Bean classes.
3) Utility.jar containing remaining Helper,utility classes.
I had deployed MDB.jar, Bean.jar by using Weblogic Console, under 'Deployments'-> 'EJB Module'. How can i deploy Utility.jar ? First of all, do i need to deploy Utility.jar? Only EJB JARs need to be deployed?
If we do not deploy a non-EJB JARs, how this code will be available and is executed?
Thanks in advance.

I'd recommend you deploy these 3 components together in an EAR file. THe utility jar file could go in APP-INF/lib, or you could reference it via manifest class-path entries.
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/

Thesis Help components.tld

Similar Messages

Maybe you are looking for