TheThe "Zoom in" ( ) and "Zoom out" (-) buttons stopped working

The “Zoom in” and “Zoom out” buttons stopped working when I open a pdf file within Safari. I'd appreciate some direction as to what I should do.
Thanks,
Julio

Carolyn,
I downloaded and installed the Adobe plug in and it worked.
For those who may read this. I downloaded "AdbeRdr1013_en_US.dmg" from the link below:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5363/.
Have a nice day.
Julio

Similar Messages

HP Pro Tablet 608 - Windows 10 - Power and Volume hardware buttons stopped working - Driver Issue

I upgraded my newly received HP Pro Tablet 608 to Windows 10 and now the power and volume buttons don't work anymore. The single press of Power button doesn't turn off the screen or put the tablet to sleep, plus the Volume button doesn't do anything either. I noticed that there are two drivers in the Device Manager that have errors:1) GPIO Buttons Driver (msgpiowin32.inf)2) HID Button Over Interrupt Driver (hidinterrupt.inf) I have tried disabling and enabling and updating driver software (it says they are up-to-date) but to no avail. I also Refreshed the PC but still have the same issue. I used the "Hardware and Device troubleshooter" and it worked, until I restarted the tablet and then it stopped working again. And now even the Troubleshooter is not able to fix it anymore. Disabling the Windows Defender didn't help either. Under the Driver properties for both "GPIO Buttons Driver (msgpiowin32.inf)" and "HID Button Over Interrupt Driver (hidinterrupt.inf)", under Device status I get the message "This device cannot find enough free resources that it can use (Code 12). If you want to use this device, you will need to disable one of the other devices on this system". Does this provide a clue on how to fix this? I am getting very frustrated with these issues with the tablet, and hoping for some help before my return window for the tablet runs out. Please help!

Hey @cjdean1983 ,
Welcome to the HP Forums!
I understand the touch screen has stopped responding on your Omni 10 tablet.
If you have already performed a recovery and BIOS update the only option I can provide is to contact phone support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

DV7-1279WM microphone and quick launch buttons stopped working

For some reason my quick launch buttons and microphone have stopped working on my DV7 laptop. I know that I recently used the microphone on a Skype call, but believe since that time that Vista SP2 was installed. I am not sure when the quick launch buttons were not working, but have just literally (talking less than a week ago) got the laptop back from HP for a warranty issue with the display. A strange thing I noticed is that if i look under the settings in Skype, the microphone will record a level for a split second, but then go back to nothing again (someone I was trying to talk to said they could hear me for a second).
I thought it might be the same problems as in the 35 page thread on here, but I have sound, its only the microphone and quick launch buttons that are not working. So far I have rolled back, installed and updated sound drivers, BIOS and Quick Launch software, but no luck.
Any suggestions? Thanks.

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

★URGENT★ BLACKBERRY TORCH KEYBOARD TRACKPAD AND ALL OTHER BUTTONS NOT WORKING 9810

MY BLACKBERRY TORCH 9810 KEYBOARD AND CALL,ETC BUTTONS STOPPED WORKING.
My blackberry got ink at the top of the phone so I got a lightly wet tissue and cleaned the top part of the phone after I finished cleaning it, I recognised the keyboard stopped working. The touch screen still works but the physical keyboard and all other buttons have stopped working. Please help me, I really ened that phone for emergency uses, etc. I do not want to restore my phone so do not suggest that solution.
UPDATE: Right now I have my phone inside a bowl of uncooked rice.
UPDATE 2: 30 minutes later, I took the phone and rebooted it the keyboard still does NOT work but the trackpad can move up and down but when pressing it does nothing.
PLEASE HELP NEED URGENT HELP.

Hi and Welcome to the Community!
30 minutes is not enough...follow EXACTLY the instructions in this FAQ:
http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
Also, prepare yourself for the worst...the only thing that is predictable about moisture intrusion into a BB is that the results will be unpredictable. Since you have already re-applied power to the BB too soon, it is much more likely that you have totally fried something inside.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Home button stopped working after 1 week

I've had my new iPad mini 2 for a grand total of 1 week and the home button stopped working. Fortunately Best Buy exchanged it for me. Is this a common issue?

No.

Stopping Zoom in and Zoom out of pictures

I can't seem to find where I turn off the Zoom in and Zoom out features in iMovie related to pictures.
Where or what I have to do to turn this feature off..
Thanks

Hi Douglas,
Thanks for visiting Apple Support Communities.
It does look like this is the default behavior for imported pictures in iMovie 10, and can't be disabled from the iMovie preferences. The best workaround is to select all of the pictures in your timeline and turn off the Ken Burns effect using the Adjust menu.
iMovie Help
http://help.apple.com/imovie/mac/10.0/#mov26d3f6a6c
Modify a crop, rotation, or Ken Burns effect
In the timeline, select the photos you want to modify or restore to their original state.
Click the Adjust button in the toolbar.
The adjustments bar appears above the clip in the viewer.
To show the cropping controls, click the Cropping button.
In the cropping controls, change Style from Ken Burns to Fit to display the pictures in their original size. From there, you can crop them individually as needed.
Best,
Jeremy

How create zoom in and zoom out buttons in a JfreeChart

hi,
i want implements a "zoom in" and "zoom out" functionalitys form my Jfreechart. in a popupmenu this function there is, but i want create two buttons.
I don't know how implement this.
Can you help me???
Tanx
P.S. Sorry for my english :D

If you right click on any of the JFreeChart standard examples you will see buttons that allow you to zoom in and zoom out. Just follow the code that the examples use. This feature can be enabled/disabled using the parameters in the chart construction. Check the Javadoc.

TileLayout spark Item Renderer and Zoom in and zoom out

I implemented a spark ItemRenderer, which serves a DataGroup with TileLayout:
    <s:Border id="scrollView"
              styleName="scrollView"
              width="100%"
              height="100%">
        <s:filters>
            <s:DropShadowFilter inner="true"
                                alpha=".35"/>
        </s:filters>
        <s:Scroller id="continuousViewScroller"
                    height="100%"
                    width="100%">
            <s:DataGroup id="continuousView"
                         height="100%"
                         width="100%"
                         itemRenderer="PageRenderer"
                         dataProvider="{pages}">
                <s:layout>
                         <s:TileLayout columnAlign.OneUpView="justifyUsingWidth"
                         columnAlign.TwoUpView="left"
                         verticalGap="10"
                         horizontalGap.TwoUpView="10"
                         horizontalAlign="center"
                         verticalAlign="top"
                         useVirtualLayout="true"
                         clipAndEnableScrolling="false"
                         requestedColumnCount.OneUpView="1"
                         requestedColumnCount.TwoUpView="2"/>
                    
                </s:layout>
            </s:DataGroup>
        </s:Scroller>
    </s:Border>
I execute a zoom effect everytime some one pushes zoom in or zoom out buttons. The trouble is that zoom in and zoom out works fine. However, the gap between two item renderers increase, when I zoom out.
Is there a way that the gap remains fixed?

Zoom in means, within the PageRenderer, I use a Scale effect, which zooms in and out based on an event. The following code is for doing zoom in and zoom out for the PageRenderer. It works fine. However, the vertical/horizontal gaps increases once have a zoomed in and then try to zoom out incrementally. I want to keep the gap between elements same all the time.
If I run this same code, with VerticalLayout, It works great. However, this does not work with TileLayout.
The following link:
http://opensource.adobe.com/wiki/display/flexsdk/Spark+TileLayout
says:
"Note that justify only grows the columnWidth/rowHeight, so to handle cases where the size of the columns/rows has to shrink, the default column width/row height should set explicitly to zero."
Does anyone has any idea how to implement this?
Source Code for zoom in and zoom out:
<s:ItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:s="library://ns.adobe.com/flex/spark"
                xmlns:mx="library://ns.adobe.com/flex/halo"
                creationComplete="init()">
    <fx:Declarations>
        <s:Scale target="{this}" id="zoomPlayer" duration="150" />
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.core.FlexGlobals;
            import mx.events.EffectEvent;
            private var _zoom:Number=1.0;
            [Bindable]
            public function set zoom(value:Number):void
                _zoom=value;
            public function get zoom():Number
                return _zoom;
            private function init():void
                var proj:TestProject=FlexGlobals.topLevelApplication as   TestProject;
                proj.systemManager.addEventListener(ZoomEvent.ZoomChange, updateZoom);
            private function updateZoom(event:ZoomEvent):void
                if(zoom != event.zoom){
                    if(zoomPlayer.isPlaying){
                        zoomPlayer.stop();
                    zoomPlayer.addEventListener(EffectEvent.EFFECT_END, zoomEnd);
                    zoomPlayer.scaleXFrom=zoom;
                    zoomPlayer.scaleXTo=event.zoom;
                    zoomPlayer.scaleYFrom=zoom;
                    zoomPlayer.scaleYTo=event.zoom;
                    zoomPlayer.play();
                    zoom=event.zoom;
            private function zoomEnd(event:EffectEvent):void{
                zoomPlayer.removeEventListener(EffectEvent.EFFECT_END,zoomEnd);

What happened to zoom in and zoom out selection, so you could make the screen zoom in and out?

I added zoom in and zoom out to my yahoo toolbar and from one of the sites that let you pick buttons to add to your toolbar, and now it has disappeared. And I can not find zoom anywhere. Have you heard of this happening before? If so do you have a resolution for this? Thanks in advance. Dan

You seem to be using a Firefox 23.0a1 Nightly build.
Please update to the current Firefox 24 release.
*Help > About Firefox
*https://support.mozilla.org/kb/update-firefox-latest-version.
*https://support.mozilla.org/kb/Updating+Firefox
The Firefox version that you currently run is no longer supported with security updates.
*It is important to update Firefox and add-ons to the latest version to get all security fixes.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible.
*Firefox menu button > Options
*View > Toolbars (press F10 to display the menu bar)
*Right-click empty toolbar area
Use Toolbar Layout (Customize) to open the Customize window and set which toolbar items to display.
*if missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar setup
*https://support.mozilla.org/kb/How+to+customize+the+toolbar
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Zoom in and Zoom out

How to zoom in and Zoom out the particular area in
Graph

hi,
for zooming in & zooming out,you need to extend canvas class from AWT.Overide the method getPreferredSize() from component.Then attach this class to scrollpane.Add this scrollpane to container(Applet/Frame).Keep two button for zooming in & zooming out.when zooming in button is clicked increse the canvaswidth by amount you want,then say scrollpane.doLayout().This will create scrollbars to scrollpane.Try it out.If any difficulty then email me at [email protected]
cheers
dgk

How to open,view pdf document in a form with zoom in and zoom out functionality Please urgent

Hi
Anybody can help me with a sample code in c# to open a pdf document using forms and to give the functionality zoom in and zoom out with verticall and horizontal scroll bar. Please help
Regards
Pol
polachan

Hello polachan,
you can find two sample projects with code at
[1] and
[2].
[1]
http://www.codeproject.com/Articles/579878/MoonPdfPanel-A-WPF-based-PDF-viewer-control
[2]
http://www.gnostice.com/nl_article.asp?id=159&t=How_To_Create_A_PDF_Viewer_in_PDFOne_NET_v2_x
Regards,
Bo Liu
Developer-Hotline for MSDN Online Germany
Disclaimer:
Please take into consideration, that further inquiries cannot or will be answered with delay.
For further information please contact us per telephone through the MSDN-Entwickler-Hotline:
http://www.msdn-online.de/Hotline
For this post by the MSDN-Entwickler-Hotline the following terms and conditions
apply: Trademarks,
Privacy
as well as the separate
terms of use for the MSDN-Entwickler-Hotline .

Panel content zoom in and zoom out

I have created a panel by using flex 4.5.1.But while increasing and decreasing panel size content of panel also zoom in and zoom out respectively.But i dont want this functionality.Is there any way to overcome these problem?

thnx..
I have included above mentioned compiler argument but it works as before it work.There is no change in zoom_in, zoom_out functionality.

Mesh line artifact movement upon zooming in and zooming out of composition

I'm having a problem with my puppet tool in my After Effects composition–I'm getting this strange mesh line artifact. The layers have been imported from an Illustrator file. The boy has six puppet pin points. Hand, wrist, elbow, shoulder, neck and head. The actual animation of the puppet looks great, however, the problem arises with the zooming in and zooming out and panning over. I'm zooming in and panning over to the boy with a camera layer and null object layer before the puppet animation and then zooming out and panning away from the boy when it is over, and it's as if the mesh outline is following my null object layer during the pan and zoom... The boy is not on a pre-comp, and I tried to put in pre-comp to see if it made a difference but it does not. I also tried expanding the mesh but it doesn't work either. Any suggestions?

I'm having a similar problem. I have an illustrator file that I have a position and rotation change (to have the hand fly in), then the puppet tool mesh to have the pointer finger move to dial the numbers on the phone. I have tried non-pre-comped and pre-comped. Both produce the same results. In the first picture you can see that the mesh doesn't change position/rotation with the pre-comp. They seem to stay where I originally placed them. And where the hand flies in and moves over the mesh, that artifact is generated. I have tried expanding the mesh and making the pre-comp layer 3d.
It's rather frustrating, and I haven't found anybody solving this problem out here on the interwebs.
***OK OK. The only way I figured out to fix this was to make the illustrated hand the exact size I need it in Illustrator. Then I just don't make the layer "continuously rasterized".

How to Zoom in and zoom out

Hi All,
I am making a JFrame in which animation is shown. Balls are moving randomly on the canvas. I want to zoom in and zoom out the animation. How can i do that . Any source code or ant tip please.

AffineTransformya, or Graphics2D.scale

Zoom in and zoom out a image in a java applet

hello, i don't find any example of code of a java applet that zoom in and zoom out an image in jpeg format...
can you help me?
thanks

Crosspost (and other thread has started some answers):
http://forum.java.sun.com/thread.jspa?threadID=624295

TheThe "Zoom in" ( ) and "Zoom out" (-) buttons stopped working

Similar Messages

Maybe you are looking for