They Are Not Talking To Each Other

I just bought a new iMac. With the old iMac, every time that iTunes was launched, the computer would sync with Apple TV. This computer does not sync with the launching of iTunes. I found this out when I rented a movie last night and tried to watch it. It was there on the iMac but it did not show up on Apple TV. It was only then that I realized that the syncing was no longer happening. How can I get it to sync again?
Cheers
John

Let me just backtrack a bit here.
So I'm sitting on my sofa in front of the TV set and I fire up Apple TV.
From the Menu I choose
Settings
Computer
Add Shared iTunes Library
Connect to iTunes Window comes up with the following message
to stream iTunes content to your AppleTV, open iTunes and select AppleTV from the Devices list. You will need to enter this passcode
and then you're given a 5 digit code to enter. At this point I rush upstairs where my iMac is, open iTunes and yes, there is the Apple TV in the Devices list but there is nowhere that I can see for me to enter the 5 digit code. Ideally I should be seeing the AppleTV icon with the Click to Set up" next to it in the list as in these instructions
but all I see is a plain Apple TV icon so I am stymied. Maybe you should be renting movies via AppleTV and not on the iMac although I would have thought that with all the interconnectivity, a rental on any device can be viewed on any other.

Similar Messages

NetWeaver XI components are not talking to each other

I am an XI consultant, i dont have proper Basis support at my client, since they are fond of only ABAP stack.
They installed netweaver xi from the market place.
I am unable to import any SWCV (even SAP BASIS) from SLD to IR and IR menu is blank.
Unable to find list of adapters in Integration Directory.
RWB -component monitoring is blank .
SLD- creation of products,SWCV,Technical Sys,Buss Sys is possible.
In conclusion i can say that they all are not co-operative and not talking to each other
And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4

Hi Venkata,
Does the XI post Installation steps done by the team or not? It seems that there is some steps missing while doing the XI installation. Talk to to the BASIS team and tryu to find out the solution.
>>> Unable to find list of adapters in Integration Directory.
Check thisblog for it:
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
>>> And also i want to know wheather xi 7.0 is compatable to databases Oracle 8.0.3 and Oracle 8.0.4
In my view, yes. XI is compatible with all the versions of Oracle Database above version 8 but never tried it.
Reward points if helpful. *
Regards,
Subhasha Ranjan

With a wired keyboard and a 2014 iMac I cannot select multiple items which are not next to each other

I have recently changed from Windows 7 desktop to a new iMac running Mavericks. I have chosen a wired keyboard as I like the usual Delete key function.
I cannot find out how to select several items which are not next to each other (e.g. words in Pages). The well known method in Windows, which is repeated in the the Apple Finder Help screen, does not work. Would be grateful for advice

Hi JBowfin,
If I am understanding your question correctly, I believe that I have an article that will address this question for you:
Mac OS X 10.0: Use Command Key to Select Multiple Items in List and Column Views
http://support.apple.com/kb/TA20396
Take care, and thanks for visiting the Apple Support Communities.
-Braden

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
i have restarted my comp etc and reinstalled itunes... recurrent issue.
note - i wiped my ipod before this issue occurred, does this affect the problem?

I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Next see the the other actions of the following concerning the AMD
iOS: Device not recognized in iTunes for Windows

SOME SERVICES STOP AUTOMATICALLY IF THEY ARE NOT IN USE BY OTHER SERVICES OR PROGRAMS

I currently install a software that needs to have a services run in order to for the license to be detected.When i run the services manually i got this error message
'THE UBSLAN_LDR SERVICE ON LOCAL COMPUTER STARTED AND THEN STOPPED.SOME SERVICES STOP AUTOMATICALLY IF THEY ARE NOT IN USE BY OTHER SERVICES OR PROGRAMS'
What can cause this and solution please

Hi kuados ,
Thanks for posting here.
After reading your posting I understand that when you establish USBLAN_LDR service on windows server 2008, system prompt an error message.
According the information what you provided right now, it’s hard to determine what cause this issue, you may like to post more information about your environment
(Event log ,Other System prompting etc… ).
Please check if it worked with assign a Local System account instead of Local Service account to run this service.
Open service MMC snap-in.
Right UBSLAN_LDR service , and click “properties”.
Click “Log on” tab , and assign a local account for running this services.
Seems this issue related to a third party software, I suggest to consult software vendor for future troubleshooting.
Please understand that I don't mean to bounce you between different solution provider as I am fully aware how time consuming this can be. However, they really are
in a better position to be able to assist you with this issue as they may have experienced similar issues.
Thanks for your understanding.
Tiger Li
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT5621 My Apple ID on my iphone icloud is different to my apple id on my pc icloud. As a result, they don't talk to each other. My phone icloud account is for 25 Gigs. but my pc has 5 Gigs but none used.

My iPhone iCloud uses one of my Apple ID and the account is a 25 Gig storage. I tried to set up icloud on my pc and for some reason it seems to be linked to a different Apple id with a 5 Gig account. Obviously the two don't talk to each other but I don't know how to change one or other so they will sync.

Try the following....
Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.

When I downloaded I tunes and bought Match all 3 of my computers synced. Now I download a song from Amazon into Media player or burn a cd and they are not syncing with the other computers. I update match and have my boxes checked in preferences.

When I originally downloaded i tunes and bought match all 3 of my computers synced. Now when I download a song from Amazon into media or burn a cd into media they are not syncing. I go in and update match thinking that might work, it hasn't. I have all of my boxes checked in preferences on all 3 computers.

Yes i've tried all of that. I've turned it all the way on and off and erased all of my music and put it back on and nothing works. And with the breaking up CDs and putting into compilation categories i have already fixed all of that stuff. It's fine it just doesn't show up in the list of artists. I can find the album in the songs category and the albums category it's just it doesn't show tha name of the artist. All of the other albums that i downloaded before i updated my itunes to th most recent update are fine. It's just the two that i downloaded afterwards. Thanks for trying though.

Both my pc and android phone are synced to Firefox, but the devices are not syncing with each other

Each device (pc + android phone) is logged into Sync, but there is no sync sharing happening
<sub>edit: removed personal information for your protection. (philipp)</sub>

HI msknack,
Thank you for your question. I understand that both of the devices are not syncing to match. Can you please check the following:
*Are they on the same version of sync? (Android account should not list Firefox Sync (deprecated))
*Are the managed items checked to be synced in the sync options?
Posting back could help out other users as well.

Windows Vista & Palm Centro 690 not talking to each other

After my other phone went through the wash machine I changed to a this Palm unit. Activated it, came home and installed the sync software, worked fine. Couple of days later tried to sync again, no such luck. I have been working off and on for a couple of weeks trying to get it to work again!!! I have talked to the local Verizon office, they suggested I talk to tech support. Called them, spent over an hour on the phone with them uninstalling the software, again, download the new software, again, still nothing, did a reset and a format and again nothing. Have been using the Palm as a regular phone and it is fine. I have been unable to figure out what to do. I even talked to Hp tech support, not their problem!!! talk to the palm people. So here I am, I have looked through your forms but was unable to locate anything that is related to the Centro and Vista. I am almost willing to try anything that seems reasonable.
Post relates to: Centro (Verizon)
This question was solved.
View Solution.

From the bottom up.
Palmdestop 6.2, on a 32bit HP Pavillion a1740n, When I plug the usb cable into the phone I hear a "dull thud" like and error, then it just repeats it self. I was able to find this information the other evening:
Problem Event Name: - PnP Driver Not Found
Architecture: - x86
Hardware ID: - USB\VID_0830&PID_0061&REV_0200
OS Version: - 6.0.6001.2.10.768.3
Locale ID: - 1033
Hopefully this means something to you, as it doesn't to me. Additionally last night I was trying to install new drivers through device manager from the CD, but the machine reported that what I have is current, as well as the dialogue boxes go by so fast that it is next to impossible to do anything, such as change the path.
Thanks, for your response and I hope you come up with a solution.
KZ
Post relates to: Centro (Verizon)

Ios phone and Ipad are not syncing with each other

Both devices are set up to sync with same icloud account. ios phone is sending imessages from my email address, and when i try switching it in settings, it wont appear on my ipad messages stream.
Logged on to my iclous account and none of my phots/info is appearing there. made sure it is all set up to be backed up to icloud, but still not there/ It seems like the devices are not communicating with icloud...

HI msknack,
Thank you for your question. I understand that both of the devices are not syncing to match. Can you please check the following:
*Are they on the same version of sync? (Android account should not list Firefox Sync (deprecated))
*Are the managed items checked to be synced in the sync options?
Posting back could help out other users as well.

I have three different toolbars and want to change where they are in relation to each other

I want to move the swagbuck toolbar below the add this toolbar and ny bookmark toolbar. How do I do that?

Sounds like a driver issue. I never tested in bridge, so I could be wrong. But it sounds to me that when you are connected to that screen, your settings are not set to the full resolution of that screen.

How to select multiple nodes, which are not next to each other, in a tree?

The following code suppose to allow user select any combination of nodes (because of DISCONTIGUOUS_TREE_SELECTION), however, I can only select nodes which are next to each other. Can some one told me how to make this DISCONTIGUOUS_TREE_SELECTION work?
Thank you very much!
import javax.swing.*;
import javax.swing.tree.*;
public class TestTree extends JFrame {
public TestTree() {
super();
setBounds(0,0,500,500);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JTree tree = new JTree();
getContentPane().add(tree);
TreeSelectionModel model = new DefaultTreeSelectionModel();
model.setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
tree.setSelectionModel(model);
public static void main(String [] args) {
TestTree test = new TestTree();
test.show();

In Windows you hold down the Ctrl key while clicking on the nodes you want to select. Don't know the equivalent in other environments.

Classes are not visible to each other in a same package

Hi,
I have a question. How to make all classes in a same package visible to each other? For example, I have two classes below, T1.java and T2.java:
Below is T1.java
package thesis;
public class T1 {
     public T1(){}
     public void func1(){
          System.out.println("This is in T1 class");
Below is T2.java
package thesis;
public class T2 {
     public T2(){}
     public void func2(){
          System.out.println("This is in T2");
     public static void main(String[] args){
          T1 t1 = new T1();
          t1.func1();
          T2 t2 = new T2();
          t2.func2();
I create a directory named thesis and put T1.java and T2.java under this folder. But when I try to compile T2.java, it give me error message, seems that T2.java cannot recognize T1.class.
So, can anyone solve this problem for me. Thanks in advance.
jmling

Make sure your classpath env variable is set correctly!
to compile these classes you should have something like:
C: > javac thesis\T2.java
if your classpath is set up correctly (default is CLASSPATH=.) then the above command should work.
If your still having problems, try:
C: > javac thesis\*.java
or compile T1.java first.
Anthony

How do you setup a server to use multiple DNS servers that are not connect to each other?

Is there a way to setup a server that connects to two different domains to use the proper DNS server for name resolution?
Let say there are two DCs: serverA.subdomaina.domain.com and serverB.subdoamainb.domain.com. The domains are independent and not connected. Now you need a common server that is connected to both and need to resolve names from both
domains.
Is this possible?
I have setup a server in a workgroup. One NIC has the subdomaina.domain.com connection specific suffix and the other nic has the subdomainb.domain.com. Each NIC has the DNS server listed for the domain it is connected to.
This configuration will resolve FQDNs of one domain but not the other. This I believe is due to the fact the server only querys one DNS server and doesn't try the other DNS server.
Is there any way to make the server try another DNS server, if the first one doesn't have the entry?

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

They Are Not Talking To Each Other

Similar Messages

Maybe you are looking for