Thin blue line on Iphone 5 screen

Was wondering if anybody has any ideas as to why I would have a very thin blue line, running about three quarters of the way up my screen, about half a cm from the left. It's only noticable when the screen has a white background. Otherwise the phone is in perfect working order and is just over a year old. Any help would be greatly appreciated.

Hello there, SuePop.
The following Knowledge Base article gives us a few recommendations for troubleshooting issues with your display:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
If the issue persists, there are recommendations at the end of the article as well:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • I've just downloaded software -now have a thin blue line on my screen? pls. help.

    I have just downloaded some software...when my computer restarted, it now has a thin blue line on the screen.  What's happened?

    A: is it in all screens or just Chrome (unlikely)?
    B: reset SMC
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    C: Your LCD is highly likely NOT broken rather a signal feed hardware issue in the monitor cable that travels thru the hinge from the logic board.
    D: make a screenshot and verify if the screenshot shows the same or not.
    E: the LED backlighting is showing thru implying, of course, that the LCD feed for that vertical line is not being fed.
    Reset SMC and verify.
    if same, you have either bad monitor cable or connection of same at junction with logic board.
    At which point make appt. with Apple for diagnostic / service

  • HELP! my ipod has a thin blue line across the screen whenever i play videos

    i got my ipod a day ago. i havent dropped it or anything and when i play a video there is a thin, blue, vertical line on my screen. is it broken or what!?

    It could be a problem with the way the videos were encoded. Where did you get them from or did you encode them yourself.
    If you encoded them yourself, what program did you use?

  • Blue line scanning iPhone screen

    Hi! I have a strange problem with my iPhone 5. A transparent blue line of a half inch is scanning my screen from left to right. Not only it's weird but also it makes the running application crash! This problem occurred after iOS 7 and it did not go away with the update. Does anyone experience this problem ?

    Hi, Honeyatapple.
    Thank you for visiting Apple Support Communities. 
    Before processing any of these steps, make sure to backup your data. 
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    I would start with processing the steps for display issues in the link below. 
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    The last step would be to restore the device and test the results after the restore.  If the issue persists, see the last section labeled Issue not resolved in the article above. 
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Cheers,
    Jason H. 

  • A thin blue line on my iPhone 4S?

    Hi.
    Today I woke up to see a thin blue line on my iPhone 4S screen.
    I did not drop my phone, nor did I even charge it over night. I just left it on.
    The blue line looks like this:
    (I recreated the image, since it doesn't appear if I take a screenshot, meaning this is a screen problem.)
    I have tried restarting my phone, but that hasn't helped. The line appears all the time, no matter if I'm in an app or looking at the home screen.
    I'm not sure how this happened, as it just appeared all of a sudden, but I'm wondering if anyone knows a fix for this?
    My warranty for my phone has run out, unfortunately. =/
    Thanks.

    Did you also try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    You will not lose any data by resetting, but it can cure some glitches.
    If this does not help,and to rule out a software problem, setting it up as new device would be the next step:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If still no luck, the phone needs to be serviced, but since Apple does not offer to replace the screen for an iPhone 4s, you would have to pay the service fee to replace the whole device.
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • Why do I have a thin blue line running down the screen?

    There is a thin blue line running vertically down my imac screen a little to the right of the centre. It disappeared for a while - i think after I tapped a certain key - but then re-appeared and will not go away. What is it? How do I get rid of it? Mark

    Sounds like a problem with the display. Contact your local Apple Store or AASP and make an appointment to have the display looked at. > Apple - Support - iMac - Service FAQ

  • , I have a thin blue line appearing on my screen that wasn't there before - what is it and how do I get rid of it?

    I have a thin blue line appearing on my screen that wasn't there before - what is it and how do I get rid of it?

    Welcome to Apple Support Communities
    They are probably dead pixels or a signal of damaged GPU. If you can, connect an external display and see if the issue appears here.
    In both cases, I suggest you to take it to an Apple Store or reseller. It doesn't look as a software issue, and your display or GPU have to be replaced

  • My iphone has blue lines down the screen

    My iPhone 4 has blue lines down the screen which occasionally change colour. I've tried resetting it and restoring the settings but it is continuing to do this. please help....

    To rule out a software issue, set it back to factory settings without using the latest backup.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If still lines on the screen, this is hardware related and the phone needs to be serviced:
    iPhone - Contact Support - Apple Support
    Service Answer Center - iPhone

  • The Thin Blue Line? :-)

    My sons 17" iMac has developed a problem, in that two thin blue lines have appeared from top to bottom on one side of the screen. has anyone else had this problem and is it D.I.Y curable or is it an Apple Repair job? Thanks in advance

    Thanks for the update. The Intel iMac forums are here:
    http://discussions.apple.com/category.jspa?categoryID=189
    The Intel machines' hardware is so different from the G4 iMacs that blue lines could be due to a completely different reason.
    We've all complained about how this forum is labeled. After all, all iMac variants since the first one are "flat-panel iMacs" in spite of very different processor type and technologies. Most of the posts here are in the wrong place--not your fault!

  • A thin blue line has appeared on my ipod

    I have a new ipod touch 1 month old and a thin blue line has appeared on screen right down the middle.  how do I get rid of this?

    go settings and check genarel accessibility there you should switch off everthing and slowly check it out
    derek

  • HT2810 I have a thin blue line running down my 24" Cinema display, how can I remove it?

    I have a thin blue line running down my 24" Cinema display, how can I remove it? or is it a fault.

    It is a fault and the only way to fix it is to have the screen replaced.

  • My MacPro 10.6.8 has a thin green line on the screen.

    My MacPro is just over a year old now and I have a thin green line on the screen. I hooked it up to my TV and on the second window (the TV) the green line wasn't there. Whats the issue? How do I fix it?

    From what you are saying, sounds like a line of pixels out on the display.
    Did the TV use the same connector on the computer? If not, swap the display with the TV. If you still have the line, it is one of the items that you swapped across.
    Have you tried connecting the display to another computer? If so, is the line still there?
    What kind of display is it? Can you swap the data cable and try a different cable, could be a cable issue.
    Any adapters in use? If so, try swapping those to rule them out as a problem.
    Did the TV use the same connector on the computer? If not, swap the display with the TV. If you still have the line, it is one of the items that you swapped across.

  • I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out.  I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

    I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out.  I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET.  No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

    maahes wrote:
    did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
    For clarification: udev is in the mkinitcpio.
    I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
    My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
    linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
    Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
    As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

  • HT4044 I have a thin red line on my screen how can I remove it?

    I have a thin red line down my screen how can I remove it ?

    Have you tried this?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Why is there a blue line on my screen?

    why is there a blue line on my screen?

    Please post a screen shot of your display.  It will help to determine what needs to be done.
    Ciao.

Maybe you are looking for

  • Firewire drive cases

    The firewire ports on my External Lacie drive are not working anymore, and I called Lacie to find out what can be done, and they said I needed to get a new casing for the IDE drive that is inside. Can anyone recommend an external firewire case brand,

  • Dial up Connection using External Modem in Solaris Intel Version

    Hi How to Install a modem in Solaris 7 Intel version and how to make a Dial Up Connection Using this external Modem. Can any one Help me.... send your reply to [email protected] Thanks in Advance .... Vinod.

  • SOAP mapping error

    Hi Everyone, I created the following scenario SOAP> XI>IDOC. In the mapping, some of the fields are constant and other fields are mapped from the SOAP message. e.g. <constant> <constant> <constant> <Mapped from the SOAP message> <Mapped from the SOAP

  • Replace HTML tags in RTE

    Hi All,                I've requirement that I need to replace the html tags in RTE, I checked find and replace plugin, which only replace the text not the tags. The CQ.form.rte.SearchableDocument returns the plain text. Can anybody tell me how to re

  • Upgrading from WL6.1 to WL8.1

    We have an application that is setup OK in WebLogic 6.1sp3, TopLink 3.6.4, Win2k server, Oracle 8.1.7, EJB 2.0. The goal is to update to WebLogic 8.1. I did the WebLogic install and updated my XML persistence tags to reflect the examples I've seen. T