Thin driver for Access Database

Hi Guys,
I want to know the exact thin JBBC driver for access database,
For oracle we have "jdbc:oracle:thin:@host:port:sid" driver, I need the similar type of driver for Access,
Where can I find
Thanks

let me be a bit more descriptive..
there's no free, publicly available type 3 or 4 driver for Access.
However, if you want to buy one, take a look at this URL: http://industry.java.sun.com/products/jdbc/drivers .
It'll help you identify third-party vendors who sell what you're looking for...
Larry

Similar Messages

JDBC thin driver for oracle 7.1.3

Hi,
we r using Oracle 7.1.3. i would like to know where i can get the
thin driver for java compatible with the oracle version 7.1.3 so
that i need not install an oracle client in the clients pc.
thanks
veera
null

Jay (guest) wrote:
: BUBBA (guest) wrote:
: : Veera Nagendran (guest) wrote:
: : : Hi,
: : : we r using Oracle 7.1.3. i would like to know where i can
: get
: : the
: : : thin driver for java compatible with the oracle version
: 7.1.3
: : so
: : : that i need not install an oracle client in the clients pc.
: : : thanks
: : : veera
: : Thedatabase you're using went out of support over 2 years
ago.
: : oracle doesn't provide jdbc drivers for anything less than
: : supported version 7.3.4.
: So why does Oracle make this claim
: "The Thin driver does not require Oracle software on the client
: side. It connects to any Oracle database of version 7.2.x and
: higher. The driver requires a TCP/IP listener on the server
: side. " ???
: Jay
re-read my earlier reply -- the comment was :
Thedatabase you're using went out of support over 2 years
ago. oracle doesn't provide jdbc drivers for anything less
than the minimum supported version ---> 7.3.4.At no time did i refer to the client s/w being required !!
also it was not tested against unsupported version of the
rdbms ...
also rdbms 7.1.3 isn't y2k compliant.
use it at your own risk..
what "claim" are you saying oracle made ??
null

Performance problems using WLS6.1 with the thin driver for Ora9i from OTN

Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses. It works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

I had done this from the very beginning, but I was still getting very bad performance under
concurrent accesses. I even followed Sree's instructions and removed the old thin driver from
weblogic.jar, but this didn't help. I am now trying to get the OCI driver for 9i running and hope
this will solve the problem.
Samuel
Tamilselvan Ramasamy wrote:
You have to use Oracle's Oracle 9i thin driver .
put this driver infront of the classpath i.e before weblogic_sp.jar and
weblogic.jar
/selvan
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]..
The BEA driver is available in WLS6.1SP2 which is GA.
hth
sree
"Samuel Kounev" <[email protected]> wrote in message
news:[email protected]..
Hello everyone,
Has anyone been experimenting with the thin driver for Oracle 9i under
WLS6.1. I got it running, but
I get extremely bad performance when having multiple concurrent accesses.
It
works more or less in
single user mode. Also it seems not to support XA transactions?
When could we expect the driver from BEA to be out?
Thanks in advance!
Samuel Kounev
TU-Darmstadt, Germany

JDBC Thin Driver for Tomcat 6

I just upgraded to Tomcat 6. For older version of Tomcat I was using ojdbc14.jar and for Tomcat 6 I am still using ojdbc14.jar.
Everything is working but wanted to know if there is a newer version of the Oracle Thin Driver for JDBC?

There is one version per release of the database (with sometimes minor releases for bugfixes released later. which will have the same filename but different internal version numbers).
Only exception I know of is Oracle 11 which ships with both 1.5 and 1.6 compiled drivers.

Oracle JDBC Thin Driver for oracle 9.2.0.4

Hi,
It would be nice if someone please guide me to the download of Oracle JDBC Thin Driver for oracle 9.2.0.4.
Thanks in anticipation

user566773,
As far as I know, all Oracle JDBC drivers are meant to be backward compatible.
According to the table on the following Web page, the latest Oracle JDBC driver can be used with Oracle 9.2.0.x DBMS.
http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Good Luck,
Avi.

Java.sql.SQLWarning: [Microsoft][SQLServer 2000 Driver for JDBC]Database

HI!
I am updating a table in sql server 2000 using PreparedStatement but as im trying to updateit. SQL is giving error or rather we can say warning.
java.sql.SQLWarning: [Microsoft][SQLServer 2000 Driver for JDBC]Database changed to BRSHere BRS is my database name.
no error is generated .all the PreparedStatement is executes normally.
Can any one tell me anything about this

All the PreparedStatement is executes normally.But data is not updated in the database.

Thin driver for SQL server 2000

Hi,
Is there a thin driver for SQL server 2000?
If so where can i find it?
I searched the net but in vain.
thanx in advance
Partha

Did you try the search engine available at the java soft site
http://industry.java.sun.com/products/jdbc/drivers
I used this engine some time ago and found that the thin driver at http://www.inetsoftware.de was the best fit for our project.
hope this helps.
regards,
Abhishek.

Migrating music to an external hard drive for access by Windows

Existing discussion thread link: https://discussions.apple.com/thread/1715002?start=0&tstart=0
Hi,
I have a large (~212GB) iTunes music library that was created using iTunes on Windows. All music files, etc are held on an external drive. Now I want to be able to access my existing music library from my MacBook Pro running iTunes on OS X. When I launch iTunes I hit the key so I can select which library file it should use. I'm not currently able to select my iTunes library on the external hard disk.
I've tried following the steps covered in an existing discussion thread that I have found, Migrating music to an external hard drive for access by Windows & Mac, but that hasn't worked for me unfortunately. The linked post suggests renaming the library file (.itl) to remove its extension but the library is read-only. I've also tried doing the same when the external hard disk is connnected to my windows laptop and then switching back over to my MacBook Pro. But this has also not worked yet.
Any suggestions? Thanks.

Existing discussion thread link: https://discussions.apple.com/thread/1715002?start=0&tstart=0
Hi,
I have a large (~212GB) iTunes music library that was created using iTunes on Windows. All music files, etc are held on an external drive. Now I want to be able to access my existing music library from my MacBook Pro running iTunes on OS X. When I launch iTunes I hit the key so I can select which library file it should use. I'm not currently able to select my iTunes library on the external hard disk.
I've tried following the steps covered in an existing discussion thread that I have found, Migrating music to an external hard drive for access by Windows & Mac, but that hasn't worked for me unfortunately. The linked post suggests renaming the library file (.itl) to remove its extension but the library is read-only. I've also tried doing the same when the external hard disk is connnected to my windows laptop and then switching back over to my MacBook Pro. But this has also not worked yet.
Any suggestions? Thanks.

I want JDBC driver for Sybase database...

Hi All:
Can any one help me with JDBC driver for Sybase database ? I have surfed the net, but not able to find a Sybase driver that works correctly.
Also, can you please let me know if anything special needs to be done in case of Sybase database connection, apart from what we normally do to connect to a database like "Oracle" or "MS SQL Server".
Thanks and Regards,

And why do you think someone using Oracle might know the Competitor's drivers?
Having said this: you should give jTDS a try:
http://jtds.sourceforge.net
Also, can you please let me know if anything special
needs to be done in case of Sybase database
connection, apart from what we normally do to connect
to a database like "Oracle" or "MS SQL Server".It's all in the docs of the driver

How to set oracle thin driver for jdbc2.0 in WLS6.1?

I want to use oracle thin driver for jdbc2.0 in WLS6.1.
I just set it like what it look in jdbc1.2.
In my code, I import the classes under package oracle.sql.* and oracle.jdbc.*.
When I cast the connection from (DataSource)ctx.lookup("myPool").getConnection();
to oracle.jdbc.OracleConnection,
it raise the exception java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection.
Can any one tell me how to solve it? Thanks

Hi Andy,
You can not cast a connection returned from datasource
to oracle.jdbc.OracleConnection as it's a kind of an RMI
stub thus has nothing to do with oracle. Could you tell us
what you're going to acomplish? We'll try to offer a solution.
Regards,
Slava Imeshev
"Andy Qiu" <[email protected]> wrote in message
news:3d74787c$[email protected]..
>
I want to use oracle thin driver for jdbc2.0 in WLS6.1.
I just set it like what it look in jdbc1.2.
In my code, I import the classes under package oracle.sql.* andoracle.jdbc.*.
When I cast the connection from(DataSource)ctx.lookup("myPool").getConnection();
to oracle.jdbc.OracleConnection,
it raise the exception java.lang.ClassCastException:weblogic.jdbc.rmi.SerialConnection.
Can any one tell me how to solve it? Thanks

Is this possible to already reserve 2 TB of space on a data drive for one database

Is this possible to already reserve 2 TB of space on a data drive for one database.
Please suggest how to do this.
Best regards,
Vishal

You can either change the current filesize of current files in your database or add new file(s) whose current size is 2TB by using the ALTER DATABASE command. If you don't have instant file initialization, adding 2TB to data files can take a long time.
If you are adding 2TB to log files that can take a long time whether you have instant file initialization or not. For info on instant file initialization see
http://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx
and
http://sqlblog.com/blogs/tibor_karaszi/archive/2009/03/09/do-you-have-instant-file-initialization.aspx
In addition, there are several good links in the comments to Tibor's blog entry, especially the links to Paul Randal's blog.
Tom

Migrating music to an external hard drive for access by Windows & Mac

Hey folks
I recently migrated my collection of music to an external hard drive by:
1) changing the iTunes music folder location from the default (Music/iTunes/iTunes Music) to my external hard drive through iTunes Preferences.
2) Selecting "Consolidate library" from the Advanced drop-down menu.
Afterwards, I moved my library file to the same parent directory I put my iTunes music folder in on the external (in fact, I moved my entire iTunes folder excl the music folder which was obviously already on the hard drive). When I restarted iTunes I held down OPTION and then chose the library file on my external as the iTunes library file to be used. This was all done on a Mac.
No problems - all swell. But... I moved the library file to the external because I want to be able to use the external with multiple computers from which I can import music that will automatically be copied to the same folder (the music folder on my external) and managed accordingly. When I tried to open the library from my Windows laptop at home nothing happened. The library file I copied from my Mac had no extension, so I renamed it .itl so the Windows version of iTunes would pick it up, but selecting it as the new library did nothing.
Q1: Are iTunes library files (I assume always .itl's?) interchangeable between Mac and Windows? If not this might explain why the library didn't load up.
Q2: Is my method wrong? Is there a different procedure for getting multiple copies of iTunes on different computers and operating systems to all use the same library, saved on an external hard drive, which itself references music from the same external hard drive? Is this goal even possible?
Q3: Is it possible to have 2 or more libraries for a given installation of iTunes?
Bonus Q4: How is the album artwork saved? When I consolidated my music on the external, did this move the artwork across with it (integrated with each music file?) or was it still sitting on my Mac hard drive in the Album Artwork directory? I have since moved this folder to my external as well, when I moved the entire directory including library file across, and album artwork is visible when the library is open on my Mac, but I don't know whether its getting the images from the hard drive or the external hard drive.
Okay last one - I swear! Q5: When I couldn't get the laptop version of Itunes to open my Mac library file, I imported all my music into the default laptop library which references the music files still all located on the external. Considering the 130GB of music I'm dealing with, this took a while, but what took even longer was "Processing album artwork", which dragged on for ages. What is actually happening during this procedure - is iTunes accessing an online database to find the artwork, or is it working with the artwork already processed and saved in the album on the external?
Thanks very much in advance! Sorry for all the questions but I'd like to crack this thing once and for all.

The procedure for sharing a library between a Mac and Wintel PC on an external drive is quite simple. I did this myself so that I would have my music available to me when I worked in my lab.
First before you transfer anything to your external hard drive, the music library on your Mac should already be consolidated. Once that is done, transfer the iTunes folder (./Music/iTunes) to the external drive. Unless your music files are in a folder outside the iTunes folder—for instance, my music files are on a separate, larger volume on my Mac from the iTunes folder that is on the boot volume—copying your iTunes folder will put everything that iTunes needs onto the external drive.
Now you have two options for using your library on two machines. The first, which I prefer, is to leave your Mac’s iTunes library in place and use the external strictly for the Wintel PC. In this instance, you would need to add the .itl extension to the iTunes Library database file. When you attach your external to the Wintel PC at work and choose the library, your should be taken into iTunes with your music library intact.
In this instance, your external drive can also serve as a backup of your iTunes library because it is highly improbable that both your external drive and Mac Pro’s iTunes folders will go bad simultaneously. For backup purposes, you will need to place another copy of your iTunes Library database file on the external drive, without the extension, for your Mac; I have had issues with Macs recognizing .itl files. Of note, the content of your library on the external drive will be the same if you need to recover from the external drive, but as the Wintel PC will not update the database file without the .itl extension, any settings you change or playlists you add in Windows will not be transferred to the Mac unless you recover the Mac’s library from the iTunes Music Library.xml file that the PC would have kept current.
In the second instance, if you wish to run your library off of the external drive for both your Mac and Wintel PC, you would follow the same procedure described above, but you would need to have both an iTunes Library (Mac) and iTunes Library.itl (Windows) database files. Effectively, this would mean that once a change is made on either system, it will not be reflected on the other. As you are most likely to add new songs via your home computer, you will need to replace the .itl file with a copy of the Mac database file whenever you add music, playlists, etc.
Given the storage capacity of my Power Mac G5 and the logistics involved in managing a library stored solely on an external volume going between a Mac and PC, I find the second option to be more trouble than it is worth. For me, it is easier to maintain my Mac’s iTunes library then copy the iTunes folder over to the external drive overnight when I wish to make any updates (e.g., new content, playlists, etc.) available to my work computer. In the morning, I just add the .itl extension to database file before disconnecting the external drive and taking it to work.
Now that your first two questions are answered, yes you can have more than one library, but doing so is poor database management. You should have all of your content in a single database and use iTunes to separate content. iTunes already separates music, movies, podcasts, audiobooks, etc., but further division of content is up to the user. iTunes has had playlists and folders for a few versions now, so it is quite easy to organize your library’s content in as simple or complex a folder/playlist structure as you please.
How album artwork is saved depends on how you acquired your music. Music you purchase from the iTunes Store has its artwork placed into a separate artwork database built in the Album Artwork folder in your iTunes folder. I believe that the same occurs if you allow iTunes to find and import album covers. If you rip CDs or acquire music from other sources, you manually add the artwork, in which case the images are stored in the music files.
Lastly, when iTunes has to build a library it can take a while. Your library is twice as large as mine and on a slow(er) laptop drive the time to built a library will be excessive. Unless iTunes is crashing or freezing, let it runs its course until the library build is completed. Also, if you have copied your music files to your laptop’s internal hard drive, you should not leave iTunes referencing the external drive. In the worst case, you would want to copy your iTunes folder from the external to the laptop’s internal drive’s default iTunes folder location. Remove the iTunes Library file and allow iTunes on your laptop to rebuild the library from the XML file.

JDBC Driver for Progress Database

Hi experts,
We need to connect our SAP PI 7.0 which is running on Windows 2003 Server x64 bit Standard/Enterprise Edition SP1 to a progress database 9.1D version on Unix. The problems are
1. What JDBC driver should I use?
2. We tried to copy progress JDBC driver jar files from the progress database installation directory into my windows machine and tried to run it, it fails to run. It gives the following error
Error during database connection to the database URL 'jdbc:JdbcProgress:T:156.5.31.65:inodbc2' using the JDBC driver 'com.progress.sql.jdbc.JdbcProgressDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL 'jdbc:JdbcProgress:T:156.5.31.65:inodbc2''
3. Does anyone know what connection architecture should I use to run under such environment?
Thanks
Charu

Hi,
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
Thanks,
Satya Kumar
Reward Points If it is Useful..

Compatibility of Weblogic 6.1 Oracle Thin Driver for Oracle 9i. - URGENT Reply Needed..Thanks.

Hi, We are using Weblogic 6.1. We are currently using JDBC Oracle Thin Driver (ClassName
: oracle.jdbc.driver.OracleDriver) that is built into Weblogic 6.1 (weblogic.jar).
Our database is Oracle 8.1.7.4. We want to upgrade to Oracle 9i (Oracle version
9.2.0.4). I would like to know the compatibility of this built-in Driver for Weblogic
6.1 with Oracle 9i (9.2.0.4) and can I continue to use the same JDBC driver. Also
we have plans to upgrade our Weblogics to 8.1 version. Can we continue to use
the same Oracle Thin driver that comes as part of WLS 8.1, for Oracle 9.2.0.4.
I need this reply ASAP. I appreciate any help in this regard.
Thanks, Venkatesan.

Thank you very much for your reply.
Joe Weinstein <[email protected]> wrote:
Hi. The driver we shipped will still work with the later DBMS, but there
have been many improvements and fixes to Oracle's dirver since then,
so I highly recommend that you download Oracle's latest appropriate
thin driver, and make sure it gets into the -classpath argument that
the weblogic startup script creates for the server.
Every release of weblogic will tend to include the latest oracle
thin driver available at the time, so the 8.1 will contain a newer one
than
the 6.1.
Joe
Venkatesan wrote:
Hi, We are using Weblogic 6.1. We are currently using JDBC Oracle ThinDriver (ClassName
: oracle.jdbc.driver.OracleDriver) that is built into Weblogic 6.1(weblogic.jar).
Our database is Oracle 8.1.7.4. We want to upgrade to Oracle 9i (Oracleversion
9.2.0.4). I would like to know the compatibility of this built-in Driverfor Weblogic
6.1 with Oracle 9i (9.2.0.4) and can I continue to use the same JDBCdriver. Also
we have plans to upgrade our Weblogics to 8.1 version. Can we continueto use
the same Oracle Thin driver that comes as part of WLS 8.1, for Oracle9.2.0.4.
I need this reply ASAP. I appreciate any help in this regard.
Thanks, Venkatesan.

Oracle 8 JDBC thin driver for tomcat

Hi all,
I have tomcat3.3 installed on HP UNIX with java version "HP-UX Java C.01.18.05"
I need to connect to an oracle 8 database using a Oracle JDBC thin driver. Where can I obtain this driver? How to install and configure it for the tomcat application?
Thanks for your help.
Regards
Shriram

If you go to the link which the last person posted, http://technet.oracle.com/software/tech/java/sqlj_jdbc/content.html, there is no indication for HP-UX. The only OS it lists are NT and Solaris. Does anyone know if these versions will work on HP-UX?
Please help.
Thanks,
Sam

Thin driver for Access Database

Similar Messages

Maybe you are looking for