Thin line at top of HD channels

When watching a number of HD channels, there is a very thin line above the picture box. The line looks like it is the bottom of the picture that was accidentally projected ontot he top of the picture.
I reset the reciever a few times and it goes away for a little while but seems to keep coming back.
Any suggestions?

This is a very common problem, it has to do witht he way your TV interprets and displays the digital signal. Sometimes it could be a bad HDMI cable. I had this problem with my 32" Samsung but haven't had it at all with my 47" Olevia using the same cable box. I had the same problem with Comcast using my 32" Samsung. I never tried this, but you might try modifying the output resolution and/or 4:3 override setting on the box through the settings menu and see if that clears it up.

Similar Messages

Print Apps won't print with C510a eStation. Prints thin line at top of page.

My C510a eStation printer will not print using the Print Apps. It just prints a thin line at top of page. Everything works fine until I print.
All other print functions work. It prints from computer via WiFi. It prints when I send an email to it. It copies via the Zeen. It just won't print using the Print Apps.
Does anyone else have this problem? What is the solution?
12/23/2010 3:00PM. I just got off the phone with an HP engineer. She said that the eStation is still in the TESTING phase and to call to report problems so they can improve the product. (I would have thought the product would have been fully tested before being released to the public!)
She had me reset the Zeen display by holding down the volume keys while powering up. This erased everything that had been done on the Zeen by me and resulted in no HOME screens, which will have to be set up by me. The only app at the bottom of the blank home page was Yahoo!. Even the printer app was missing. I had to move it from the app tray to the home page. Now, I have to spend hours, again, setting up the Zeen.
After the reset, the printer apps seem to work now. The Zeen will copy using the printer app. My computer still seems able to print and scan to/from the eStation.
The eStation C510a eStation printer and Zeen display are very exciting. However, they are not for someone not willing to spend the time to get it to work properly. If you have a cell phone, be prepared to use up a lot of minutes while on support.
The HP engineer said that it will soon have a new release of Android operating on the Zeen which will allow it to be faster.
This question was solved.
View Solution.

I have decided to return this printer to the store as it just has too many problems. HP has essentially told me they will not issue updates to solve the problems. I hate this, as I really loved the product.

I have an imac, intel 2 duo. OS 10.6.8. Suddenly my desktop is showing two thin lines running from top to bottom, each about 2" from either side. How can I get rid of them?

I have an imac, intel 2 duo. OS 10.6.8. Suddenly my desktop is showing two thin lines running from top to bottom, each about 2" from either side. How can I get rid ofthem?

That's strange...
Resetting PRAM might help: http://docs.info.apple.com/article.html?artnum=2238
If that doesn't help, I'd recommend contacting AppleCare.
it seem to be lcd problem

When I do apps expose there is a thin line on the tab of google chrome (top part ( )) is it normal?

There is a thin line in the google chrome tab when I do app expose.. is it normal?

Try uninstalling the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and the current version of Firefox.

Whats the easiest way to put a thin line around an image?

Can anyone tell me the easiest way to put a thin line around
an image? I'm also interested in the use of thin lines as part of
the graphic design on a page, how are they generated?
Thanks

.oO(cdeatherage)
>In Dreamweaver, you can set a border for each image but
be aware that some
>versions of some browsers may not display it.
This shouldn't be an issue in any used browser today.
>If it is a consistent look you're
>after, I'd say the most permanent thing to do would be to
edit the image in
>Photoshop or Fireworks. In Photoshop, e.g, I'd create a
background fill with
>the color I wanted the border, then add the image,
centered, in a new layer on
>top of that. Merge the layers, then save optimized for
the web.
Way too complicated. If you want to change the color or style
of the
border, you have to modify the image. With CSS you can
directly change
the line style in a much easier and faster way.
Micha

Drawing and some layout help for a simple control: thin lines and application start

I am trying to create a new, simple control. The control should act as a grouping marker much like that found in the Mathematica notebook interface. It is designed to sit to the right of a node and draw a simple bracket. The look of the bracket changes depending on whether the node is logically marked open or closed.
After looking at some blogs and searching, I tried setting the snapToPixels to true in the container holding the marker control as well as the strokewidth but I am still finding that the bracket line is too thick. I am trying to draw a thin line. Also, I am unable to get the layout to work when the test application is first opened. One of the outer brackets is cut-off. I hardcoded some numbers into the skin just to get something to work.
Is there a better way to implement this control?
How can I get the fine line drawn as well as the layout correct at application start?
package org.notebook;
import javafx.beans.property.BooleanProperty;
import javafx.beans.property.IntegerProperty;
import javafx.beans.property.SimpleBooleanProperty;
import javafx.beans.property.SimpleIntegerProperty;
import javafx.scene.control.Control;
* Provide a simple and thin bracket that changes
* it appearance based on whether its closed or open.
public class GroupingMarker extends Control {
private final static String DEFAULT_STYLE_CLASS = "grouping-marker";
private BooleanProperty open;
private IntegerProperty depth;
public BooleanProperty openProperty() { return open; }
public IntegerProperty depthProperty() { return depth; }
public GroupingMarker(boolean open) {
this();
setOpen(open);
public GroupingMarker() {
open = new SimpleBooleanProperty(true);
depth = new SimpleIntegerProperty(0);
getStyleClass().add(DEFAULT_STYLE_CLASS);
// TODO: Change to use CSS directly
setSkin(new GroupingMarkerSkin(this));
public boolean isOpen() {
return open.get();
public void setOpen(boolean flag) {
open.set(flag);
public int getDepth() {
return depth.get();
public void setDepth(int depth) {
this.depth.set(depth);
package org.notebook;
import javafx.scene.Group;
import javafx.scene.paint.Color;
import javafx.scene.shape.FillRule;
import javafx.scene.shape.LineTo;
import javafx.scene.shape.MoveTo;
import javafx.scene.shape.Path;
import com.sun.javafx.scene.control.skin.SkinBase;
* The skin draws some simple lines on the right hand side of
* the control. The lines reflect whether the control is considered
* open or closed. Since there is no content, there is no
* content handling code needed.
public class GroupingMarkerSkin extends SkinBase<GroupingMarker, GroupingMarkerBehavior> {
GroupingMarker control;
Color lineColor;
double shelfLength;
double thickness;
private Group lines;
public GroupingMarkerSkin(GroupingMarker control) {
super(control, new GroupingMarkerBehavior(control));
this.control = control;
lineColor = Color.BLUE;
shelfLength = 5.0;
thickness = 1.0;
init();
* Attached listeners to the properties in the control.
protected void init() {
registerChangeListener(control.openProperty(), "OPEN");
registerChangeListener(control.depthProperty(), "DEPTH");
lines = new Group();
repaint();
@Override
protected void handleControlPropertyChanged(String arg0) {
super.handleControlPropertyChanged(arg0);
    @Override public final GroupingMarker getSkinnable() {
        return control;
    @Override public final void dispose() {
    super.dispose();
        control = null;
    @Override
    protected double computePrefHeight(double arg0) {
    System.out.println("ph: " + arg0);
    return super.computePrefHeight(arg0);
    @Override
    protected double computePrefWidth(double arg0) {
    System.out.println("pw: " + arg0);
    return super.computePrefWidth(40.0);
     * Call this if a property changes that affects the visible
     * control.
    public void repaint() {
    requestLayout();
    @Override
    protected void layoutChildren() {
    if(control.getScene() != null) {
    drawLines();
    getChildren().setAll(lines);
    super.layoutChildren();
    protected void drawLines() {
    lines.getChildren().clear();
    System.out.println("bounds local: " + control.getBoundsInLocal());
    System.out.println("bounds parent: " + control.getBoundsInParent());
    System.out.println("bounds layout: " + control.getLayoutBounds());
    System.out.println("pref wxh: " + control.getPrefWidth() + "x" + control.getPrefHeight());
    double width = Math.max(0, 20.0 - 2 * 2.0);
    double height = control.getPrefHeight() - 4.0;
    height = Math.max(0, control.getBoundsInLocal().getHeight()-4.0);
    System.out.println("w: " + width + ", h: " + height);
    double margin = 4.0;
    final Path VERTICAL = new Path();
    VERTICAL.setFillRule(FillRule.EVEN_ODD);
    VERTICAL.getElements().add(new MoveTo(margin, margin)); // start
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, margin)); // top horz line
    VERTICAL.getElements().add(new LineTo(margin + shelfLength, height - margin)); // vert line
    if(control.isOpen()) {
    VERTICAL.getElements().add(new LineTo(margin, height - margin)); // bottom horz line
    } else {
    VERTICAL.getElements().add(new LineTo(margin, height-margin-4.0));
    //VERTICAL.getElements().add(new ClosePath());
    VERTICAL.setStrokeWidth(thickness);
    VERTICAL.setStroke(lineColor);
    lines.getChildren().addAll(VERTICAL);
    lines.setCache(true);
package org.notebook;
import com.sun.javafx.scene.control.behavior.BehaviorBase;
public class GroupingMarkerBehavior extends BehaviorBase<GroupingMarker> {
public GroupingMarkerBehavior(final GroupingMarker control) {
super(control);
package org.notebook;
import javafx.application.Application;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Label;
import javafx.scene.control.TextArea;
import javafx.scene.layout.BorderPane;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class TestGroupingMarker extends Application {
public static void main(String args[]) {
launch(TestGroupingMarker.class, args);
@Override
public void start(Stage stage) throws Exception {
VBox vbox = new VBox();
BorderPane p = new BorderPane();
VBox first = new VBox();
first.getChildren().add(makeEntry("In[1]=", "my label", 200.0, true));
first.getChildren().add(makeEntry("Out[1]=", "the output!", 200.0, true));
p.setCenter(first);
p.setRight(new GroupingMarker(true));
vbox.getChildren().add(p);
vbox.getChildren().add(makeEntry("In[2]=", "my label 2", 100.0, false));
Scene scene = new Scene(vbox,500,700);
scene.getStylesheets().add(TestGroupingMarker.class.getResource("main.css").toExternalForm());
stage.setScene(scene);
stage.setTitle("GroupingMarker test");
stage.show();
protected Node makeEntry(String io, String text, double height, boolean open) {
BorderPane pane2 = new BorderPane();
pane2.setSnapToPixel(true);
Label label2 = new Label(io);
label2.getStyleClass().add("io-label");
pane2.setLeft(label2);
TextArea area2 = new TextArea(text);
area2.getStyleClass().add("io-content");
area2.setPrefHeight(height);
pane2.setCenter(area2);
GroupingMarker marker2 = new GroupingMarker();
marker2.setOpen(open);
pane2.setRight(marker2);
return pane2;

The test interfaces are already defined for you - the 3rd party session bean remote/local interfaces.
It is pretty trivial to create implementations of those interfaces to return the test data from your XML files.
There are a number of ways to handle the switching, if you have used the service locator pattern, then I would personally slot the logic in to the service locator, to either look up the 3rd party bean or return a POJO test implementation of the interface according to configuration.
Without the service locator, you are forced to do a little more work, you will have to implement your own test session beans to the same interfaces as the 3rd party session beans.
You can then either deploy them instead of the 3rd party beans or you can deploy both the test and the 3rd party beans under different JNDI names,and use ejb-ref tags and allow you to switch between test and real versions by changing the ejb-link value.
Hope this helps.
Bob B.

I'd like to remove a thin line that is part of the page design in one of Aperture's photo books. I can't seem to make it happen. Any suggestions?

I'd like to remove a thin line that is part of the page design in one of Aperture's photo books. I can't seem to make it happen. Any suggestions?

The mouse that came with my Mac does not have a right click feature. When I try to highlight and click, it just opens the link I don't want anymore. What I want to do is remove unwanted links from the top bar. For example, I no longer use GoodSearch or myEarthLink, but I can't delete them. There are also some links that never should have found their way up there, and I don't know how they ended up there, and I can't remove them either. I've read through a ton of questions and answers, and I can't find one that addresses the problem. With my Safari browser, all I have to do to remove an unwanted link is to click and drag it to the trash. It doesn't appear to work that way with Firefox, to my chagrin. I hope this better explains my question. Maybe that will give you a better insight into a solution.

Gradient to transparent have thin line when stroke is 0 pt

I have a simple rectangle with a gradient that fades to white and has an effect of multiply and opacity set to 85%. Where it fades to white the background image meets the gradient so in effect the rectangle color fades to transparent.
However, even as I have no stroke, 0pt, and 0 opacity on stroke in the effects box there is still a thin line around the box, no matter what I do I can't seem to affect it.
My text is in a separate text frame in a layer on top of this gradient rectangle. This gives me solid color on the text.
How can I get rid of this line around the rectangle? What can give a thin line besides stroke?

No, "Stitching" was not it. Exporting to later pdf-versions didn't help.
When I revisited this problem as I resized the affected text box and the problem reappeared, I decided to cut out the text and delete the old box. Then I made a new empty text box and pasted the text into that. Problem gone!
I still don't know what the problem was as I could find no stroke nor any effects related to this box. I'm going to open the original file later and delete everything but the affected box just to see if there is some setting somewhere not so obvious.

Thin gray bars top and bottom

After a lockup where I had to hard reboot and restore, two thin gray bars appeared on screen, at very top and very bottom. They hid the small battery icon at top.
Called Apple and they will give me a new one. Could not find other topics online about this same hardware issue. Seems it was the screen board that was defective. This occurred only after about 6 weeks of use.

Yeah the thin lines were not there originally on the iPod Touch. They appeared suddenly and hid about 3/4 of the small battery icon right across the top and bottom, so definitely a defect. The lines would not flip when the iPod was placed in landscape mode. They were along the top and bottom only (portrait mode and did not disappear when placed landscape).
This was after my screen went completely WHITE and I couldn't return to normal until I pressed the power and mode buttons.
Must admit Apple was on the ball and gave me no hassle. They sent me a prepaid box within a day, in which I placed the iTouch, and I simply called UPS for pickup as pre-established in the instructions. Painless and free. All labels were preprinted.

Thin 'line' of light inside far left of earpiece?

Hey I have a 2G 8GB iPhone (I just got it yesterday) and realized that when the screen is on, there is a really thin line of light (from top to bottom) inside the earpiece on the far left side of it. When the screen turns off, the light inside the earpiece goes off too.
Is this normal? I've never noticed this before on friends devices.
Thanks.

I'm noticing the same thing with the black plastic piece on the back of mine. I have two small light leaks on the extreme right and left of the screen bewtween the screen and the ear phone. I wonder if this is something to do with the heat the phone gives off.

My PC has blue screened twice in the past week so I force quit it it came back on a few times after that it is now grey screening with inch wide blue lines from top to bottom the apple logo is there and it is trying to boot up but nothing happening

My Mac has blue screened a couple of times this week it started to work a couple of times after that but now it is grey screening with inch wide blue lines from top to bottom the apple logo is also there it is trying to boot up again but won't. Not sure don't know anything about how to fix things but I suspect the fan has stopped working as I can't hear one. The problem I have I now live in Turkey and I am 1000 km from the nearest apple shop which is in Istanbul I believe and I now live in Didim, Altinkum I don't trust the everyday Turkish shop to take it to as they will tell you they know how to fix it but will probably make it worse, typical in Turkey. Please can someone help as we use it for our business and obviously I need it up and running ASAP I am using IPad and iPhone at moment but can't access my files which are on PC.

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Is there a way to create a heading with shading behind the text and thin lines above and below?

I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!

I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel.

Safari 5.1 now is garbled with many of the sites having lines on top of each other. Is any one else having that issue? If so, how did you resolve it? Thanks in advance for any help.

Safari 5.1 now is garbled with many of the sites having lines on top of each other. Is any one else having that issue? If so, how did you resolve it? Thanks in advance for any help.

"Did you make the .psd file with a transparent background (checkerboard) in Photoshop? And when you placed it in AI did you choose the top option Convert Photoshop Layers to Objects?"
Yep, and it still didn't work.
But I figured what I did wrong: I was selecting both the text and the heart, and then I was doing the whole Object>Wrap Text>Make thing, as opposed to just selecting the heart and doing it. Once I did it, I moved the heart around on top of the text, and it "made room" for the pic, wrapping itself around the heart.
Thanks so much, and thanks A MILLION for being so patient.
Jeez, when can I get some textbook to learn all the intricacies of Illustrator?

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

I have Windows Vista and have tried everything! My Ipod Touch has Malfunctioned and cannot be recognized by Windows or Itunes! When I turn my Ipod on the white apple comes on and the 15 seconds or so after that a thin line comes on the screen above it.

A thin line appears above the logo then the loading sign pops up and then the whole thing freezes! I read somewhere to hold the home button and then plug in the usb will help it be recognized by Itunes or help to restore it! I tried that it didn't work.I tried uninstalling Itunes and then re-installing it. I have the newest version of Itunes and don't know what else is left to do? can someone please help?
Thank you for reading!

Try placing the iPod in recovery mode (I think that is what you were try to do) and then try to restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Thin line at top of HD channels

Similar Messages

Maybe you are looking for