Thin White Lines - I can't get rid of them! Help!

I have a project in InDesign and whether I print directly from InDesign or export and print from PDF the thin white lines appear.
I have attempted all the solutions from this page Thin white, dark lines (stitching) | Export to PDF | InDesign CS2 and later,
but haven't had any luck.
One layer are colored circles with affects and the top layer is text.
Please help!
Thanks in advance!

What export settings are you using? In my experience, letting Acrobat do the flattening is more reliable than if ID does it, but there's no guarantee that you won't see stitching on any particular printer unless you eliminate transparency from the design.

Similar Messages

  • Vertical lines appear in every photo taken w my 3 yr old Power Shot A470.Can't get rid of them.Help?

    in the midst of photo shoot yesterday, this vertical line pattern appeared in every photo and can't get rid of it. Triple checked all my settings, nothing's changed about how I take my photos. 
    Through the viewfinder when I prefocus I see the result of what my photo should look like after the shot, but after I take it, the shot is 50% lighter, with a horrible pattern of lines. Has my camera totally died? Does anyone know what I can do to fix this? I cannot take photos anymore with this all time favorite camera of mine

    First try a complete reset if possible, I can't see it being the memory card but if you have a spare one try that.
    One cause could be the sensor or the display itself, I've had faulty ribbon cables  going to the display on TV sets causing similar problems.
    I take it they are in the same place on every shot.  What does a good photo show  up like, i.e., one prior to this fault showing? This would point to the sensor or display, since the photo was taken previous to the fault it 'would' eliminate the sensor as this is only used when taking photos and not when 'viewing'.
    Pity you couldn't post a sample as it *may* help.
    Davy

  • I somehow managed to add lines on my master slide and can't get rid of them.  I now have a useless rectangle on the left half of many of my slides.  How do I remove this?

    I somehow managed to add lines on my master slide and can't get rid of them.  I now have a useless rectangle on the left half of many of my slides.  How do I remove this?

    Select the master slide,
    copy any objects you want to keep,
    Select all, (command A), and press delete key.
    Paste back the items to retain (Command V)

  • Line I can't get rid off

    There is a line I can not get rid off. I turned all the layers off and it is still visible if I turn all the layers on it is also visible. I can't select it and I can't erase it because it's in none of the layers.
    Does anyone has an idea of what it could be and how I can get rid of it?
    Looking forward to your answer!

    Hi,
    You're in the wrong forum.You should be asking over in either the Photoshop Windows or Photoshop Mac forum.
    http://forums.adobe.com/community/photoshop
    I believe I know what the answer is though. It looks like you've drawn a rectangle with the rectangle tool with the path option selected. To get that to go away, you'll need to deselect the path.
    There are several ways to deselect the path so the line goes away.
    1. Grab one of the path tools...pen tool would be a good choice; hit ESC key.
    or
    2. Open paths palette and click in the blank area...under work path. Note: You don't have to have a path tool selected to use this method.
    or
    3. Grab the direct select tool; click in the document...anywhere but on the path; hit ESC
    There are other ways to deselect a path but any of these three will do the trick.

  • ITunes on iCloud has created unwanted multiple playlists. How can I get rid of them?

    iTunes on iCloud has created unwanted multiple playlists. How can I get rid of them?

    Hi, if this is in regards to your library simply open up itunes and do the following steps:
    Click File
    Scroll down to "show duplicates"
    A list will then appear of your duplicate song titles.
    Be sure to CAREFULLY review each song to make sure it is a duplicate ( as I have some music that is the same song but live, acoustic etc...)
    Proceed to manually delete each song from the list and leave alone any song that you wish to keep.
    For playlists, you will need to hit the name tab so that your doubles line up, from there you will have to manually delete them, it helps to hold the Control button to select multiple songs as a time ( they will be highlighted) then when your done selecting the songs you wish to delete, right click your mouse and select the delete option from the window tab.
    Best of luck, please rate my response for help!
    Cait

  • When I open on Mozilla Firefox, several identical items open on bar at bottom of page, when only one is needed, and I can't get rid of them apart from closing the whole lot.

    Different tabs used to appear at the top of the page (Yahoo), which I could easily close. This has stopped. When I click on Mozilla Firefox on my desktop, about 6 little boxes appear at the bottom of my page, at least two of them being mozilla, and I can't get rid of them except by closing down the internet. If I go through Talk Talk, (a second email address) and get to Yahoo this way, this doesn't happen, but I always prefer to use Mozilla Firefox.

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • I synched my iphone4 on my wife's imac to down load pics but got 700 unwanted contacts.  How can I get rid of them without doing one at a time?

    I synched my iphone4 with my wife's imac with the hope of  uploading pictures from my phone.  Instead I now have 700 plus contacts on my phone I do not want. How can I get rid of them except one ata time?

    iTunes does not handle the import of photos/videos from the iPhone's Camera Roll.
    If this is not the computer you sync your iPhone with, you should have been provided a warning message that your iPhone is associated with an iTunes library on another computer and when trying to transfer any iTunes content from a different computer, a warning message is provided indicating that all iTunes content on the iPhone will be erased first.
    When connecting an iPhone to iTunes on another computer, none of the options under the various tabs for the iPhone sync preferences with iTunes are selected automatically. This means you had to select Sync Contacts under the Info tab for your iPhone sync preferences with iTunes on your wife's computer.
    Assuming you are syncing contacts with a supported address book app on your computer, connect your iPhone to Tunes on your computer and without syncing, under the Info tab for your iPhone sync preferences below the Advanced section, select Contacts for replace info on this iPhone followed by a sync.
    For importing photos/videos from the Camera Roll which can be done with a computer that is not used for syncing the iPhone since syncing with iTunes is not involved.
    http://support.apple.com/kb/HT4083

  • Installed office for mac (trial version). now I got 2 excel files, which cannot be deleted. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion(with win 7 parallel)

    now I got 2 excel files, which cannot be deleted on my desktop. I can't open them, either. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion (with win 7 parallel)

    The people who make that stuff have their own forums you can also search/ask in:
    http://answers.microsoft.com/en-us/mac/forum

  • ClamXav detecting phishing email (can't get rid of them)

    I received an email from my wife that she did not send me. It was an email that made no sense. It just had a bunch of words in a very long document. I assumed that her email program (Mac Mail) must have become infected with something that sent this email out to everyone in her address book. I deleted the email and downloaded ClamXav to check my system and make sure everything is ok.
    Whenever I run ClamXav, it detects 8 files with the following infection name: (Heuristics.Phishing.Email.SpoofedDomain)
    I ask ClamXav to quarantine the files, then I go into that folder and delete them. But if I run a check later, those 8 files are back. I can't get rid of them.
    I'm wondering if they are reinfecting my Mac Mail program via Apple's mail servers. I'm not sure if all my mail messages are kept on Apple's server, and them somehow these malware files get re-downloaded to my computer. I tried to figure out if there is a setting in my mail program that allows me to uncheck a box that says, "save mail files on server".....but I can't find any such setting. I thought I remember seeing something like that in the past.
    Does anyone have any idea what is causing my computer to be continuously reinfected and what I should do about it? I don't notice any problems with my computer, but obviously these files that I can't permanently delete has me worried.

    Randall Olson1 wrote:
    Whenever I run ClamXav, it detects 8 files with the following infection name: (Heuristics.Phishing.Email.SpoofedDomain)
    I ask ClamXav to quarantine the files, then I go into that folder and delete them. But if I run a check later, those 8 files are back. I can't get rid of them.
    First, I would encourage you to come to the ClamXav Forum to more quickly and efficiently answer questions such as this.
    My standard guidance for handling reported e-mail infection is as follows (pay particular attention to #6):
    Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
    So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
    When possibly infected e-mail files are found:
    Right-click/Control-click on either the infection or file name in the ClamXav window.
    Select "Reveal In Finder" from the pop-up menu.
    When the window opens, double-click on the file to open the message in your e-mail client application.
    Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
    If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
    If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
    To fix corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

  • I am getting a weird alert I can't get rid of. Help! I have amber and gov alerts turned off. All other alerts turned off I think it may be a sever weather alert but can't find it!

    I am getting a weird alert I can't get rid of. Help! I have amber and gov alerts turned off. All other alerts turned off I think it may be a sever weather alert but can't find it!

    That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

  • Hi, incorrect previously used e-mail address suggestions keep appearing in my Yahoo! ID box when signing in & I can't get rid of them.

    Hi, incorrect previously used e-mail address suggestions keep appearing in my Yahoo! ID box when signing in. I can't get rid of them. I've tried clearing the cache and cookies. I couldn't find an option to clear private data, don't know if that would work. My Yahoo password is not saved and my password is not the problem. I just want to know how to delete previously used emails from logging in suggestions so they stop appearing, hope you can help, cheeeers - Dave.

    Thanks very much for the response Sandee. I tried your suggestion of the  Annotation option and this worked! - wonderful.. altho this test now works for me I'd still love to get it working from InDesign.
    What I'm trying to achieve... my client had 5 powerpoint presentations that need updating with new branding (totally about 160 pages - with about 20 basic animations - i.e. flashing lights on products etc).
    I sold him on the idea of using InDesign/PDF rather than powerpoint - but am needing to find an easy solution for the animations. So I've been working on this test file. Have self taught myself on a basic flash animation (from Lynda.com)... and tried importing both SWF and QT .MOV into InDesign and then exporting to PDF and when it loaded up in Acrobat it would always "unexpectedly quit" upon opening... even after trying different versions of PDF compatibility and restarting etc.
    Is there something obvious that I'm not doing right?
    Also if I get it to work, does that mean that my client and all their staff around the world will need to be Acrobat Reader 9?
    Thanks again for your time and help
    R

  • I tried to move my photos to MY PASSPORT and they populated all over my screen; I can't get rid of them.  HELP!

    I tried to move my photos to MY PASSPORT and they populated all over my screen - I can't get rid of them.  HELP!

    This problem sounds like a missed target and too many files: user meant to drag and drop files to the WD My Passport icon on the Desktop but dropped files on the Desktop instead. If so, there could be thousands of files on the Desktop; Finder is trying to create icons for every dropped file--and one day Finder might finish--but the Mac is essentially stuck till those files leave the Desktop.
    Various solutions exist, with increasing levels of difficulty:
    1. In Finder, hit Cmd-N to open a "list" display window of the Desktop, then move files from this window to a new folder--or, as others advise, Cmd-drag files to the WD My Passport  (easy, but given the bogged-down system, probably not an option).
    2. From the Finder menu, Go > Desktop to get to a "list" display rather than an "icon" display window, followed by drag/drop clean-up to a new folder or Cmd-drag files to the WD (again, easy, but also perhaps not possible).
    3. Start in Safe Mode (http://support.apple.com/kb/HT1564) and then move the excess Desktop files to a new folder or Cmd-drag files to the WD. (Safe Mode loads only essential graphics routines, so the Finder may be more snappy even with an overloaded Desktop).
    4. Boot from the installation DVD and then navigate to the overloaded Desktop to move the photo files to a new folder or Cmd-drag to the WD.
    5. Use a second Mac to connect in Target Disk Mode (http://support.apple.com/kb/ph3838) to clean up the messy Desktop.
    6. Use Terminal and unix commands to clean the Desktop. Try the easy ways first.

  • I have an amazing number of duplicates - not photo - but other.  How can I get rid of them?   Virtually all kinds if data is duplicated often 20- to 50 times. The duplicates are bot restricted to any one kind of data.

    I have an amazing number of duplicates - not photo - but other.  How can I get rid of them?   Virtually all kinds if data is duplicated often 20- to 50 times. The duplicates are bot restricted to any one kind of data.

    https://discussions.apple.com/message/25888564#25888564

  • Can't get rid of the help screen

    CC2014. I can't get rid of the help screen because the links at bottom are gibberish. See screen shot. What font am I missing?

    Man, logging into Adobe is a major hassle. Anyway, I reloaded Tahoma and Lucida. But I don't see any delete or do not display.

  • HT201302 I put some pictures from my PC  onto my IPad  and now can't get rid of them.is there some way to delete syncs  pictures?

    I got some pictures from my PC onto my iPad and now can't get rid of them.

    gdxn wrote:
    I have taken all my photos off the PC and delegated all the pictures I can from the iPad and did a sync and the photo album that I want rid of is still on my iPad.
    You don't take the pictures off the PC you leave them there and tell iTunes that you don't want them on the iPad (by unchecking them) and then sync. That will delete the pictures from the iPad.

Maybe you are looking for

  • Problem in file2IDOC scenario

    Dear all, I am using File adapter on the receiver side and IDOC adapter on the sender side. I am using delete option for processing mode. The file is getting deleted in the source directory but i don't find the IDOC at all in the IDX5 (XI). I have ev

  • Reg database logical locks

    hii all,      I want to keep locks(logically) to the existing database records as my ztables(3 tables with 1 parent table,containing header data and 2 line item tables having the foreign key relationships with header table) are accessed at time by ma

  • MDM Workflow (no Properties pane in MS Visio)

    Hi, I am using SAP MDM version (5.5 SP5) (5.5.41.70) and workflow and MS Visio 2003 Professional. When we go to MDM Data manager and create a new workflow and then click on "Microsoft visio document", system take me to MS visio screen but not show me

  • How can i simulate a decaying sine in multisim

    I'm gonna be glad if some one can help me to simulate a decaying sine signal in multisim 10, best ragards, Aldapool

  • Issue with Epson RX500 - scanning

    So I tried scanning some stuff today using image capture on and it worked great the first two times. After that it would scan but then not show anything in image capture and the program would freeze up. It wouldn't lock the program but you couldn't s