ThinApp factory, Create workpool image with Win7 32bit ISO fails.

Hi
I,m trying to deploy an Windows 7 32bit enterprise image in a workpool.
It wont even start the process in vCenter and fails almost instant.
In catalina.out i can see an error..
13:42:55,460 ERROR akka:event-driven:dispatcher:default-16 workpool.VmImageInstanceImpl:141 - Installation was unsuccessful - VIException :
args = ('No vim.Datacenter named 172.16.253.62',)
The IPadress is pointing to our VC and we get the same error using DNS name..
Anyone got any idees?
I think i tried "everything" already and i,m realy stuck.
Thanx!
/Zeilon

I have the same problem , workaround was to deploy workpool and clone existing VM

Similar Messages

Creating an image with a Cloud Effect

Can someone please tell me how I can create an image with a
cloud effect like the photo located at the link below:
http://www.arizonamedicalclinic.com/
Thanks in advance for all of your help.

Nessa wrote:
> Can someone please tell me how I can create an image
with a cloud effect like the photo located at the link below:
>
>
http://www.arizonamedicalclinic.com/
>
> Thanks in advance for all of your help.
Draw a cloud shape. Fill it with white and add a black inner
glow.
Position the cloud shape over the photo. Press Shift and
select both the
cloud shape and the image. Choose Modify > Mask > Group
as Mask.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Can't create disk image with Disk Utility

I just upgraded to OS X Mountain Lion and i can no longer create disk images with Disk Utility in order to store encrypted data.
The operation fails and ends with the post :
Failed to create disk image, error:
hdiutil: create failed - Resource busy
I use three Macs with Mountain Lion, and this problem occurs only on one of the three.
I check the disk, repair permissions and did a reset of the PRAM. I even did a reinstall of Mountain Lion, without success.
But curiously, using a new user account, I was able to create a first disk image. But no one after.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Create an image with ActionScript

How do you create an image with ActionScript? The image is
located at an url that is not guaranteed to be on the same server.
I would prefer something that is compatible with previous
versions of the Flash player.
If you could point me to some tutorial or show me how it is
done.
Thanks

This is suuuuuuuuuuuuper basic, you just have a movieclip on
the stage and the URL of any image on the internet/local computer
function loadImage(imageUrl:String,
holder_mc:MovieClip):Void{
holder_mc.loadMovie(imageUrl);
Fill the two parameters with the 1. image url and 2.
movieclip that holds the image
It will load the image into it. Much more in depth tutorials
and stuff can be found all over the place, just google it.
Sam

Webcam doesnt work on my Satellite A300-243 with Win7 32bit

I have A300-243 PSAG8E, after installed win7 my webcam DONT WORK.
it had been worked before with VISTA AND spype.
I upgraded the bios and updated drivers.
Webcam is not listed driver of win7 32bits of A300.
As it suggested in one of the forums i downloaded other driver from A500/ A350 ect non of them worked.
displayed on the screen:
"Webcam is either disabled or has failed. Please check your webcam settings" also Camera is not listed in Device Manager." imaging not listed.
I restarted and used cccleaner after my attemps and nothing succeded.
What else I could do.
PLEASE HELP ME.
ORNA

I have an A 300. I just fixed this problem by replacing the cable. It took me 3 hours to disassemble the laptop (clean it) and put it back together again. Now it works like New! The spare part number of the cable is V000932480.
In my case:
- camera stopped suddenly for no apparent reason.
- I didn't upgrade my OS or anything
- it beep every time I closed the screen
- It didn't show on device manager (only at 45dg position but I couldn't do anything anyway)
- camera software crashed every time, and said; Camera not found, restart or install.
In my opinion, after some time, the wire got damaged just by the hinge, although I couldn't see anything broken.
If you have the same issue and you are used to open the laptop then don't look on SW issues... just change the cable. If you are not sure then just buy an external web cam. it wont solve the problem but it would be much easier.
I hope it helps someone as other posts helped me. Good luck

Creating javaFX Image with InputStream

Hi,
I have dataset(Medical Image data), i want to build a javaFX Image,
Can some one help me how can i construct the image from this.
is there any way creating a image other than using url?
Thanks....

Try this:
var stream = A.class.getResourceAsStream( "lion1.png");
Stage {
    title: "Image from stream"
    width: 250
    height: 280
    scene: Scene {
        content: [
            ImageView {
                image: Image {
                    impl_source: stream
}

How do I create an image with a transparent shape?

Hi
This should be easy -
The end result I want is this:
a png which is mostly black (or any colour) but with a defined shape in it which is transparent.
I have the shape. I select it. I seem to be able to make a mask from this (a selection which I can copy and move about). But what I can't figure out how
is how to create a new image which is filled except for this masked area.
Any help gratefully received.
Thanks
--Justin Wyllie

Open a blank, new file with foreground color green
Type text
Open effects palette, and in the drop-down go to bevels, then select "Simple Emboss" - it is the second one in my program. Apply
Still in he effects palette, in the drop-down, go to visibility, select "Hide". Apply
Double click the f icon on the text layer in the layers palette to bring up the Style settings dialog, and add a small stroke to better define the letters.

How to create an image with a transparent shape

Hi
This should be easy -
The end result I want is this:
a png which is mostly black (or any colour) but with a defined shape in it which is transparent.
I have the shape. I select it. I seem to be able to make a mask from this (a selection which I can copy and move about). But what I can't figure out how
is how to create a new image which is filled except for this masked area which is transparent
Any help gratefully received.
Thanks
--Justin Wyllie

Open a blank, new file with foreground color green
Type text
Open effects palette, and in the drop-down go to bevels, then select "Simple Emboss" - it is the second one in my program. Apply
Still in he effects palette, in the drop-down, go to visibility, select "Hide". Apply
Double click the f icon on the text layer in the layers palette to bring up the Style settings dialog, and add a small stroke to better define the letters.

What is the most efficient way to create an image with no background?

When I create, or use, a logo, or type, or any graphic image,in a design, I want to import it to InDesign with no background - "transparent", if you will.
The steps involving importing from PShop seem convoluted, at best, with bitmap, greyscale and eps files... I know I am on the wrong track with this process, since it never seems to work.
Also, wish to import from Illustrator and sometimes Painter12.
Is there a quick'n'dirty way, or a best way, to do this?
Thanks, forum people!

First, it's OK to combine responses into a single post. Everything goes to the forum, not the individual, so we all see it all,so to speak.
Double clicking the background or duplicating it are just different paths to the same end, and you pick one based on what you are doing, as much as anything. "Background" in Photoshop is locked for transparency, so if you need a tranparent background you MUST do something. If I know I'm not going to need to do other stuff, I probably would double-click and convert the layer just for convenience and to reduce the file size, but if it's a client file or I know I may need to add adjustments and so forth, I usually will duplicate the background (even if I don't need transparency) and turn off the original. This gives me an untouched backup position and a source for making more copies, if necessary. I don't like doing any sort of destructive edit without using a copy of the original data.

Can't create cd image with any CD

Hi,
I'm having trouble creating a CD Image in Disk Utility. I insert the CD and then open Disk Utility. I then highlight the CD drive and click on New in the menu. The problem is that the "Disc Image from Device" option is greyed out. Does someone know why this option can't be selected?
This happens with any cd
Thanks,
Roby

If you are going to burn copies of the CDs, use the "Importing" pane of iTunes' "Advanced" preference to import using AIFF or Apple Lossless Encoder, so you don't reduce the audio quality. Also check the box to use error correction.

OSD - Creating 1 Image with choice of Software & Driver Packages

I am kindda new to SCCM 2012. I was wondering if it is possible to have like 1 Windows 8.1 Image and when it is being deployed we get a prompt for choice of Driver and Application Packages. The reason is that we have different kind of laptops and different
requirements for software. It would be good to have a prompt where you can choose which Driver Package to deploy based on the hardware and choice of software package that depends of the user's department.

Retrograde_PAK, a good majority of our software deployments occur based on our computer naming convention so having a decent naming convention would
be very helpful. I also create collections for all(most) of my software packages and am able to pull device records into their deployment collections based on membership queries again typically I leverage our naming convention but you could use any number
of things... AD location... Installed OS... basically anything that sccm has stored in its db for those records. then those collection are populated automatically based on those queries and the package is installed.

Create an image with 100% height?

Hi,
I am working on a project and require an image to stretch to
the full height of the table cell.
The width will be fixed at 40 pixels, but I require the
height to always be 100% of the cell.
I have tried simply adding the height tag as 100%, but this
proves inconsistent in various browsers.Is there a way in which I
can achieve this, so it will work consistently on all browsers and
platforms?
Many thanks

Make it a background image and let it tile to fill the space.
Or just use
an HTML color background.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"TangentGraphic" <[email protected]> wrote
in message
news:euftp1$d1s$[email protected]..
> Sorry in delayed response - Adobe server down...
>
> The image is a flat coloured gif - image distorsion is
not an issue. Are
> you aware of my best way to achieve its 100% height?
>
> Thanks

Best Practice: Working with Win7 32Bit & 64Bit Versions in MDT 2012

Whats the recommended way for producing bootable media using MDT2012 that would support 32 and 64 bit versions of Windows 7?
Should I have 2 deployment shares or do I import the 2 operating systems source dvd's into the same deployment share?
is it possible to create 32 & 64Bit bootable media from 1 deployment share and if so what settings would I need to modify in the task sequence & advanced configs to allow me to do so?

No problemt to run both x86 and x64 in the same deploymentshare.
Yes you can create both 32 and 64 bits boot media (winpe) in one deployment share.
In the properties of you deploymentshare, general tab you choose if you want to support both x86 & x64.

HOWTO and script: create and burn an UDF image with 4+GB files

Most people think, creating UDF images with files bigger than 4GB or even 1GB is impossible, however it's not true! You just need udftools. Also you need to load loop and udf modules. There's a good howto by grigio, I also created an (admitably pretty poor) script to do it automatically, since grigio's howto doesn't include real dvd sizes:
UDFPATH=$HOME
echo -e "By default the udf image will be placed into your home directory. \n Do you want to enter an alternative one? (Enter y or n)"
read yesorno
if [ $yesorno == y ]; then
echo "Please enter the directory you want to use: "
read UDFPATH
if [ -d $UDFPATH ]; then
echo "Using $UDFPATH"
else
echo "Creating $UDFPATH" && mkdir -v $UDFPATH
fi
fi
if [ $yesorno == n ]; then
echo "Using default directory"
fi
if [ $yesorno != y -a $yesorno != n ]; then
echo "Incorrect entry, aborting..." && exit 0
fi
if [ -e $UDFPATH/udf.iso ]; then
mv $UDFPATH/udf.iso $UDFPATH/udf.iso.bak-`date +%y.%m.%d-%H.%M` && echo "udf.iso already exists! Backing up..."
fi
echo -e "Please enter your type of disk: dvd5p, dvd5m, dvd9p or dvd9m:\n(5/9 stand for normal/double layer disk and p/m for +/-)"
read type
if [ $type == dvd5p ]; then
echo "Creating a 4,7 GB DVD+R image..."
dd if=/dev/zero of=$UDFPATH/udf.iso bs=1024 count=4590208
fi
if [ $type == dvd5m ]; then
echo "Creating a 4,7 GB DVD-R image..."
dd if=/dev/zero of=$UDFPATH/udf.iso bs=1024 count=4596992
fi
if [ $type == dvd9p ]; then
echo "Creating a 8,5 GB DVD+R image..."
dd if=/dev/zero of=$UDFPATH/udf.iso bs=1024 count=8347648
fi
if [ $type == dvd9m ]; then
echo "Creating a 8,5 GB DVD-R image..."
dd if=/dev/zero of=$UDFPATH/udf.iso bs=1024 count=8343424
fi
if [ $type != dvd5p -a $type != dvd5m -a $type != dvd9p -a $type != dvd9m -a $type != cheat ]; then
echo "Wrong type entered, aborting..." && exit 0
fi
mkudffs $UDFPATH/udf.iso
echo -e "UDF image created in $UDFPATH/udf.iso. Want to mount it right now? (Make sure udf and loop modules are loaded)"
read yesorno
if [ $yesorno == y ]; then
echo "Please enter the directory you want to use for mounting: "
read MOUNTPATH
if [ $UDFPATH = $MOUNTPATH ]; then
echo "You can't mount the image to the directory it exists in!" && exit 0
echo -e " Mount it yourself with 'sudo mount -o loop,user,uid=`id -u` -t udf $UDFPATH/udf.iso targetdir\'"
echo " Afterwards copy your files, unmount the image and burn the dvd."
echo -e " For burning you may just use 'cdrecord -eject -dao -dev=/dev/sr0 $UDFPATH/udf.iso'\n (the path to your DVD burner may vary!)"
fi
if [ -d $MOUNTPATH ]; then
echo "Using $MOUNTPATH"
USERID=`id -u`
sudo mount -o loop,user,uid=$USERID -t udf $UDFPATH/udf.iso $MOUNTPATH
echo "Copy your files, umount the image and burn the dvd."
echo -e "For burning you may just use 'cdrecord -eject -dao -dev=/dev/sr0 $UDFPATH/udf.iso'\n(the path to your DVD burner may also vary)";
else
echo "Creating $MOUNTPATH..." && mkdir -v $MOUNTPATH
USERID=`id -u`
sudo mount -o loop,user,uid=$USERID -t udf $UDFPATH/udf.iso $MOUNTPATH
echo "Copy your files, umount the image and burn the dvd."
echo -e "For burning you may just use 'cdrecord -eject -dao -dev=/dev/sr0 $UDFPATH/udf.iso'\n(the path to your DVD burner may also vary)";
fi
fi
if [ $yesorno == n ]; then
echo -e "All right, then mount it yourself with 'sudo mount -o loop,user,uid=`id -u` -t udf $UDFPATH/udf.iso targetdir'\nAfterwards copy your files, unmount the image and burn the dvd."
echo -e "For burning you may just use 'cdrecord -eject -dao -dev=/dev/sr0 $UDFPATH/udf.iso'\n(the path to your DVD burner may also vary)"
fi
if [ $yesorno != y -a $yesorno != n ]; then
echo "Incorrect entry, aborting..."
echo -e " Mount it yourself with 'sudo mount -o loop,user,uid=`id -u` -t udf $UDFPATH/udf.iso targetdir\'"
echo " Afterwards copy your files, unmount the image and burn the dvd."
echo -e " For burning you may just use 'cdrecord -eject -dao -dev=/dev/sr0 $UDFPATH/udf.iso'\n (the path to your DVD burner may vary!)"
exit 0
fi
EDIT: Some major mistakes solved.
Last edited by ku (2009-04-23 19:02:41)

See the second article for how to look through a list of files in a folder.
http://stackoverflow.com/questions/7854727/loop-over-video-files-in-folder-to-ge t-video-length

Crashes with Premiere CS4 under Win7 32Bit

Hello, since a few months, I work with Premiere Pro CS4 4.2.1 on an ASUS based PC (Striker II Mainboard 4 Cores and 4 GB RAM). I also use an external Video RAID 0, connected via a eSata controller card. All application like Photoshop and Aftereffects run correctly and stable. When I cut videos on Premiere Pro in HD or SD, I often have undefined crashes with Premiere Pro CS4. Sometimes the application quits itself, sometimes I get no response from the GUI, or while Rendering a message appears that the is no enough systemspace. I have Terabytes Spaces and I can't imagine that this should be the problem. The mediacache is also routed to the video drive. Those crashes happens 7 times or more a day. I tried several codecs and it makes no different whether I use the connected Blackmagic Design Eclipse Interface or not.
With Driver Genius Pro I searched for the latest mainboard and graphic drivers, but without any changes in result. Do you have expirience with Win7 32bit and ASUS Striker II Maninboard. Is it a good idea to buy a new 64 Bit PC and an upgrade to CS5? May this solve hanging problems? What could be the reason for Instability?
Thanks for answers.
Sincerely
André

André,
I cannot address your MoBo question, but have some articles that might offer a few tips. The first ARTICLE is on setting up one's computer for a video editing session, one of the most intense operations that one can subject a computer to. For Win7, please look down to the last addenda, as there is a Win7 specific link to Black Viper's page.
The next ARTICLE is on finding clues as to what is happening, when the program crashes or hangs.
The last ARTICLE is a link to general troubleshooting tips for PrPro.
With Driver Genius Pro I searched for the latest mainboard and graphic drivers, but without any changes in result.
I'd take this one step further, regarding your video card's driver. Note the exact card that you have, its driver info, and go to the mfgr's. site. Find the very latest driver, and compare with what you have installed. Too many of those all-in-one updaters will stop far short of getting the very latest driver. I have seen systems, using similar, where the video driver was 3 years old, and showing as "most recent." For nVidia, or ATI/AMD, that will be ~ 30 driver versions behind.
Just some thoughts, and good luck,
Hunt

ThinApp factory, Create workpool image with Win7 32bit ISO fails.

Similar Messages

Maybe you are looking for