Things have been running a bit slowly on my mac of late, several months after having installed 8 gig of fresh ram
Good evening, folks.
I'm running with a 13 inch 2011 macbook pro. Some months ago, I upgraded from 4 to 8 gigs of ram. Things were snappy and running very smoothly, however, over the past several weeks or so, I've noticed a decline in efficiency. I do run my chrome browser constantly, usually itunes is open, but beyond that my applications are open only when they are in use. I do have usually 2-3 spaces available as organization of my display. I've ran an EtreCheck report, however, I don't know how to interpret it. Any help?
Problem description:
recently installed 8 gigs of ram on my macbook pro, worked excellent for some time….i seems like however now it’s running on only 1.46 gig ‘wired’ ram. Not sure what’s up.
EtreCheck version: 2.0.7 (93)
Report generated October 29, 2014 at 8:43:57 PM CDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 10 days 16:39:25
Disk Information: ℹ️
ST9500325AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Logrus (disk0s2) / [Startup]: 499.25 GB (25.18 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Splashtop Streamer.app
[not loaded] com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) Support
[not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[invalid?] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] com.splashtop.streamer-for-root.plist Support
[loaded] com.splashtop.streamer-for-user.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.splashtop.streamer-daemon.plist Support
[loaded] com.splashtop.streamer-srioframebuffer.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.splashtop.streamer-for-user.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uTorrent UNKNOWN (missing value)
MediaLinkHelper UNKNOWNHidden (missing value)
Dropbox Application (/Applications/Dropbox.app)
MediaLinkHelper Application (/Library/PreferencePanes/MediaLink.prefPane/Contents/Library/LoginItems/MediaL inkHelper.app)
Remote Mouse Application (/Applications/Remote Mouse.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.1.0 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
MediaLink Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
The Pattern [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
17% WindowServer
9% iTunes
5% Google Chrome
2% hidd
2% opendirectoryd
Top Processes by Memory: ℹ️
266 MB Remote Mouse
196 MB iTunes
172 MB Google Chrome
77 MB Google Chrome Helper
69 MB WindowServer
Virtual Memory Information: ℹ️
65 MB Free RAM
1.41 GB Active RAM
1.36 GB Inactive RAM
1.59 GB Wired RAM
35.66 GB Page-ins
545 MB Page-outs
The uptime of your Mac is more than 10 days. How about a simple reboot?
Similar Messages
-
About a month back I decided to uninstall some applications to make room on the PC (Windows 7 64 bit). Mow when I open the Creative Cloud panel I just get a blank box with no app and no headings. I uninstalled the extra applications with windows 7. How cam I get my creative cloud back?
Hi David,
Please refer to the threads below where this issue has been addressed:
New Creative Cloud App unusable: it's blank!
creative cloud is blank window why?
Cloud Desktop App is blank?
Re: Creative Cloud app opening blank
Regards,
Sheena -
Updated TorBrowserBundle and none of my settings, bookmarks,preferences,and add-ons were migrated to the new version. Have you had trouble with this before? I did not replace my older version, so can I migrate these settings and add-ons like is possible with the bookmarks HTML file export?
We are currently running 10.8.5 with Workgroup manager 10.8 and Server App 2.2.5
My question is, would there be any modifications i would need to make to your instructions for them to work on the above os and app version? -
Thanks so much for your recommendations! Mary
Hi Ned.. thanks taking the time to reply.. but, unfortunately, I got the same error message. BTW, I found it interesting that my serial number did NOT work in the downloaded version, so I selected the trial, which resulted in the same error message: Your installation encountered errors, Please try restarting your system and installing again. Inconsistency in the installer database. Please restart your computer and install again. I am open to other trouble-shooting ideas!
-
I have a PowerPC G5 quad core Mac with a pre-intel chip. I have been running Firefox successfully for over five years and have used every version in operation during that time. Tonight, I received notice that the latest version of 3.6 was ready to install and that I needed to restart. I did that and was taken to a page telling me that 4.0 was available for downloading and use. So I downloaded the new 4.0 and tried to install it in the typical Mac fashion. After clicking on the dmg, I dragged the icon into my applications folder and onto the dock. But when I click on the icon on the dock, I get the message: The application cannot be launched. 10661
When I try to launch by double clicking in the applications folder, I get the message: You cannot open the application Firefox because it is not supported on this system.
I had to go to your site using Safari of all things! I tried re-installing it with another download, and that one misbehaves in the same way. By the way, in case it matters, I still have 42 GB available on my hard drive and 5 GB of RAM.
There is one other funny thing. The Firefox icon from the disk image has a white circle with the slash through it on top of the fox and world symbol. That is what appears in my applications folder and in my dock. It appears to be saying NOT FIREFOX, as it would indicate in a NO U-TURN sign. What is this all about?I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6. -
I have been running firefox now for about 4 years and love it. Recently I tried signing on and it just runs a blank page. I uninstalled it and re installed it to no avail. I have it on my allow list for my fire wall , and have tried all the fixes that i can. can you please help. I use your program as it runs my different web sites so much better than chrome or internet explorer. attached is a picture of what I encounter when I try to sign on. than You in advance. Colleen
Hi Colleen, assuming it isn't an external software issue, then the next few things to try are as follows:
'''Firefox's Safe Mode'''
This is a standard diagnostic tool to deactivate extensions, hardware acceleration, and some other advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
If the menus are operable, you can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
If the menus are not operable, exit/crash Firefox and hold down the Shift key when starting it up again. A small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Can you load any pages?
If you have the same issue, it could either be something in your settings or in Firefox's program folder. These approaches test those possibilities.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
''Don't delete anything here.''
Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like Dec17, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
Can you load any pages in the new profile?
If so, it sounds like a settings problem. If not, it could be corruption of Firefox's program files. See the "Clean Reinstall" section below.
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.
To keep the new profile and migrate data, check out this article: [[Recovering important data from an old profile]].
Or as an intermediate measure, you could go back to your regular profile and try the Reset/Refresh feature. This article describes what is kept and lost in that process: [[Reset Firefox – easily fix most problems]].
'''Clean Reinstall'''
(1) Download a fresh installer for Firefox 34 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox.
(3) Rename the program folder
''(32-bit Windows folder names)''
C:\Program Files\Mozilla Firefox
to
C:\Program Files\OldFirefox
''(64-bit Windows folder names)''
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
When starting Firefox, you may need to use the profile manager to switch back to your regular profile.
Any improvement?
Note: Some recently installed plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* \OldFirefox\Plugins
* \OldFirefox\browser\plugins -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
I own Final Cut Pro 6 and have been running it on an older G4 tower. I upgraded to a MacPro tower and the app will not install. I get a message "Not supported on this computer" cannot believe this. Help anyone.
Here are the min. system requirements.... it looks like you meet them.... but I may have missed something...
Final Cut Studio 2 (Including Final Cut Pro 6)
• A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
• 1GB of RAM
• An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
• A display with 1024-by-768 resolution or higher
• Mac OS X v10.4.9 or Mac OS X v10.5.5 or later
• QuickTime 7.1.6 or later
Additional Recommendations
• 2GB of RAM when working with compressed HD and uncompressed SD sources
• 4GB of RAM when working with uncompressed HD sources
• A display with 1280 x 1024 resolution or higher
Additional Requirements for Motion
• A standard or built-to-order system configuration with a NVIDIA GeForce 5200, FX Go5200, FX 5200 Ultra, 6600, 6600 LE, 6800, 7300, 7300 GT, 7800, 7600 GT, 8600, 8800 or Quadro class graphics card.
• A standard or built-to-order system configuration with a ATI Radeon 9800, 9700, 9600Pro, 9600XT, 9700Pro, X800, X1600, X1900, or X2600 class graphics card; or a ATI Mobility Radeon 9700 or 9600 graphics card.
• For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM.
Additional Requirements for Color
• The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac, or 2.5GHZ or faster Power Mac G5 Quad:
• ATI Mobility Radeon X1600
• ATI Radeon X1600
• NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6800 Ultra DDL, 6800 GT DDL, 660, or Quadro FX 4500.
• For 32-bit rendering: a graphics card with at least 256MB of VRAM.
• A display with 1680-by-1050 resolution or higher (excluding 20" iMac); dual displays are highly recommended.
• A three-button mouse for full functionality
Apple article on Final Cut Studio 2: http://support.apple.com/kb/SP535 -
How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.
Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem. -
I have a desk top which has Windows Vista. On this computer I have been running Itunes for a long time. My new computer is a Lap top and it runs Windows 7.
I recently loaded Itune on the new computer. I attemted to use Easy Transfer to transfer my Music but was unable to connected the two computers so I transferred my music to a external hard drive and loaded the music on the new computer. I have the folders and files carefully and they appear to match. When I try to run Itunes on the new computer I am unable to access the new music. Itune always goes to the sample music. The only difference I can come up with is Windows Vista and Windows 7. Does anyone have any suggestions?Hi,
Are you trying to use the Help -> Updates method?
Both those patches need to be manually applied to PSE 9.
Brian -
CS6 Camera Raw - I can now only crop using aspect ratio in the custom crop setting rather than being able to set the dims in cm and inches? anyone know how to revert? ever since installing new mac operating system things have been strange!
Hi Kglad.
I have looked at all of my settings both in Bridge and CS6 Photoshop regarding Camera Raw. I am at a loss how to set the crop tool in cm or inches as I once did - now the only option is to crop using ratios of 1:1 etc etc - This is infuriating as lots of my square crops I could set at 10" x 10'' specifically to print one to one to fit frame and mount size -
Now if cropping using bloody aspect ratio of 1:1 (square) the actual dims of the crop are roughly 4.25 inches x 4.25 inches. this means I then have to open the whole image in photoshop in order to crop at the dims I have set! It was so much quicker in terms of batch cropping in camera raw being able to set dims in centimetres and inches but they have gone and mucked around with it, with the new bloody update! Unless you are an absolute genius and know how I can go back to having an option of CM, Inches and aspect ratio within the custom crop settings? (Please say you do)
here is the new tutorial for CC - my guess is they have scrapped the control we had over the custom crop settings
Cropping Images In Adobe Camera Raw 8 -
I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor
I'm keen to know if you get a response to this. I've been running Elements 12 for a year now, and suddenly my Editor is not working. I'm running Windows 8.1 and just get a message that says "The Editor is not working". Not very helpful.
-
Monitoring user issued queries...and how long queries have been running.
soalris 9
oracle 9i and 10gr2
I am trying to get the user issued query and how long it has bee running.
I was trying to test on test database running a query under scott schema with
1.5 million records which is almost taking more than 5 minutes and trying to
see If I can see the query and how long it has been running.
I ran script(show.sql---from Ask tom) got it from NET and i see session status as INACTIVE while query was still running. And I do not see the query in output.
I could see the show.sql query in output.
Why is it showing session status as INACTIVE when the sql is still running.
Could you please provide me sql that will show user issued quries and how ong they have been running
Message was edited by:
user539835
Message was edited by:
user539835Go to Morgan's Library at www.psoug.org and look up "DBMS_APPLICATION_INFO." This built in package has a procedure named SET_SESSION_LONGOPS that may help you.
-
Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Restore new iPad Mini from iPad 1 backup. Ican update new apps from Apple store but most of my apps have been showing the Waiting status for over 12 hours. Store shows them as installed. What gives?
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.
Maybe you are looking for
-
Loading (point) features takes MapViewer 20 times sql exec time?
I have a map which contains only one theme which shows 14500 point geometries stored in a table (accessed via a view). Rendering the map takes a long time, more than 22 secs. Looking at the log from MapViewer it seems like the sql execution time is n
-
On my new laptop FF won't open my homepage until I sign in to yahoo
FF goes to the correct address, but a box comes up that says ff will not allow the page to load. There is a sign in box for me to sign in to "my,yahoo.com" and then it goes to the homepage. The address for my homepage is correct, but will not load un
-
Create New Variable for COPA Drilldown Reports in KE3E
Hi, How can we create a formula variable for COPA Drill down reports in KE3E? In standard global variables formula variable is not avaiable, I need to create a formula variables like ...from period, to period, last fiscal year and next fiscal year..
-
Linked Server "Could not open a connection to SQL Server [1909]" after reboot
We have two production servers, with RCP [out] enabled linked servers set up back and forth between them. When they are rebooted at the same time one of the linked servers will throw this error: Named Pipes Provider: Could not open a connection to SQ
-
File to IDOC 4.6c (ORDERS05.ORDRSP) PI 7.11
Im reading a file through the PI file adapter and writing it to the IDOC adapter into 4.6C. I have overwritten MESTYP in mapping in the EDIDC40 to (ORDSP) but when the IDOC is received in 4.6 the message type displays as ORDERS not ORDRSP and so the