Things to be need to taken care in Rollout
Hello Guru,
I am doing rollout for PM. I am aware of customizations required to do for PM but little bit confusing from accounting side. that how & which are the things we need to maintain related to accounting in PM so that we will get all accounting/costing related data from transaction.
Could you plz suggest me few tips/links which we need to taken care in rollout.
Thanks in advance.
Regards,
Amol.
Hi Sir,
Rollout you need to follow your template also the change must accommodate with global team.
related with CO should be Activity type & Cost center that assign to cost center.
Hope will help you.
Thank you.
Similar Messages
-
Help needed to take care of Duplicate Inserts
Hello,
I have one insert operation that takes place making use of the following structure,
INSERT INTO SOMETABLE (B, C, D)
SELECT A.ID, A.NAME, A.SOMEOTHERID
FROM TABLE1 A,
TABLE2 B,
TABLE3 C,
CONTAINSTABLE(TABLE2, COLUMN1, @SEARCHTERM) KEY_TBL,
WHERE A.MART_STATUS = 'SINGLE' AND
A.SEX = 'MALE' AND
C.ETHNICITY = 'SOMETHING' AND
C.ETHNICITYID = A.PATIENT_ETHNICITYID AND
A.ID= B.ID AND
B.SOMEID= KEY_TBL.[KEY]
Now as you can see, in the above query multiple records will be inserted into table SOMETABLE. Now I am facing the following problem, the above query is generated dynamically and is executed as EXEC @STATEMENT
The table SOMETABLE has composite key (i.e Columns B, C and D are primary keys together). Now if I do a multiple records insert in the SOMETABLE, and if records already exists, then it throws an error and aborts. I want the remaining inserts to carry on either by filtering the duplicate records or doing something else.
Can somebody please help me out with this. I facing an urgent issue which needs to taken care asap. Any help would be greatly appreciated. Thanks in advance!
Edited by: user8633848 on Oct 10, 2009 9:32 PMuser8633848 wrote:
But I dont think I was rude in any of my sentences. I think it would be good on your part to server others by helping rather than just replying with your sentences. While you may have had no intention of being rude, I was merely stating that calling an issue "urgent" in a forum of volunteers is considered bad etiquette.
And regarding the urgent issue, it is high priority one and that is the reason I am asking for help.If the issue is truly urgent and it needs to be solved now, you should investigate a paid support/consulting option. We, as a community of volunteers are in no way obligated to provide immediate support. However, we often try our best to help when we can.
So first please correct your understanding of English and then reply!I believe I have a satisfactory understanding of the English language, especially since it is my first and only language.
I would recommend that you read my original response again. It looks like the SQL you posted was something out of Microsoft SQL Server. I do not recognize any of the syntax as "Oracle SQL" syntax. Therefore my recommendation is to consult a Microsoft SQL Server forum.
Thanks and have a wonderful night! -
What are the steps need to be taken care for MM data sources while extrac
what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
RachaHi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328] -
What are the things taken care while using multiple suites?
Hi all,
I have created a plugin which sends the current file path to an url,
its working fine with debugging in Visual studio 2005 and while it is added to the Adobe Illustrator its works only once.
That is its sending the file path only for one file. While i tried for the second time its not working
I am using following suits in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I am using the "AIURLSuite" for calling the url and it is calling the url multiple times while its used alone, and its only working once with the multiple suites.
What are the things taken care while using multiple suites? , is it neccessary to release all variables and the suites after completing the task?
Should they released in the same order in which they are acquired?
Thanks in advance
Sreejesh K VHi,
The problem was with the "sAIDocument->GetDocumentModified(mod);"
The "GetDocumentModified" is crashing after executing once, i just removed that statement , and now
i am forcefully saving the document with out checking the modification status!
Its working fine now!
Could you please tell me how can we lock a plugin , or a particular function in a plugin.
There is any specific standard to use the GetDocumentModified function?
Thanks and Best Regards
Sreejesh K V -
Which r things need to take care during merging one plant to another plant
hello gurus,
which are the things we need to take care during merging of one plant into another plant.
here I listed few things, plz suggest me apart from this & correct me
1. PM Master data (Funct Loc, Equipment, MM of Spare material, BOM/Assemblies, Work Centers,Measuring Points/
counters, Class & Characteristics, etc)
2. PM Plans & Task lists
plz let me know any other things which i missed & need to take care.
thanks in advance...
Regards,
Amol.Hello Amol,
Take of of following things:
1. Structure indicator because two plants may have different structure indicator.
2. Also take care of planning plant assignment, depends upon the type of planning (central, local or partially central). 3. Assignment of planning plant to maintenance orders types.
4. Take care of locations and plant sections and their assignment
Merger is different from roll out. Here you will have to delete configurations rather than extention.
Regards,
Vaibhav Mishra -
What steps have to be taken care while Transporting.
Please search the forums before posting
Hi
Experts,
Once development is done, what are the steps and procedures should be taken care in order to move to
Maintenance.
Edited by: Arun Varadarajan on Jun 17, 2009 6:37 PMHi
Just make sure you collect all the dependents objects. For example if you are collecting the Infocube then the info objects should be collected along with the infocube or should have sent before sending the infocube.
In case of transformation, both data source and info cube should be transported before transporting transfomation.
In case of infocube the dependent objects are info objects. In case of transformation, the depenedent objects are data source and data target.
Go to Transport connector, to collect the objects in a request by selecting necessary objects option.
Hope it helps.
Regards
Sadeesh -
What are the main steps to be taken care while doing recording for LSMW
Hi,
I am facing problem in LSMW.
Can anybody suggest me that What are the main steps to be taken care while doing recording for LSMW for recording mm01 ?
thanks'
nareshHi,
Recording in LSMW is similar as SHDB.
in LSMW after you give Project-Subproject and Object.
1)Go to-> Maintain Object Attributes -> double click
2)Press Display/Change Button at top left to make editable mode.
3)Select radiobuton -> Batch Input -> Give Recording name say Z_mm01
4) Click the Recording Overview boton on right -> Give TCode which u want to record....
Rest refer the Document link attached.
Please find the links to various threads on the same.
Re: LSMW - Using a BAPI
BAPI, IDOC in LSMW
Upload the data in LSMW using BAPI
This one is the most complete document for the same
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://service.sap.com/lsmw.
Regards
Kiran -
HT201441 i forget the id and all things and i need to open my phone as a new one
i forget the id and all things and i need to open my phone as a new one
<Personal Information Edited by Host>Are you also having trouble with Find My iPhone Activation Lock? If so, you cannot bypass it. You will need Apple ID and password used to activate the iPhone originally. You can try this if you have forgotten: https://iforgot.apple.com/password/verify/appleid
-
Hi I'm from Australia.
If I buy an Apple Airport Extreme Base Station and I have an Optus Cable internet. Do I really need an Apple Care Protection? or I don't have to?Any specific recommendations for a standalone ADSL modem though?
Always a good idea to use the modem that your service provider supplies or recommends....often free....since you know that it will be supported in the event of connection difficulties.
I have made the mistake of choosing the "best" modem based on test reports....only to find out later that the ISP would not offer any support when I was having connection difficulties.
The ISP blamed the modem. The modem support folks blamed the ISP. -
I want to switch to a Smartphone and try things out, but need a phone with 32GB of memory and the G 2014 has a card for it.
When will the Moto G 2014 version be available for Prepaid plans?You can buy Applecare anytime before the 1 year warranty expires, so you could leave that to his discretion if you wanted, and he'd have 1 year to consider it.
You can save ~$30 on the mini if you qualify for an educational or corporate discount. Office 2004 costs ~$145 with educational discount. -
i tried purchasing an in app thing but i need to kno security questions but i dont remember ever setting any how to i check them?
Have you find out? I have same problem.....
-
What are the steps which we need to tack care to point XI 3.0 to BW PI 7
Hi Experts,
Need help please, right now we are sending data through XI 3.0 to BW 3.5 system, the scenario's is working fine. Now client wants to upgrade BW3.5 system to PI 7, XI system is same 3.0.
Now what are the steps which we need to tack care to point XI 3.0 to PI 7 to work existing scerarious.
Thanks,
Venkat.Hi Venkata,
When you say PI 7, do you mean BI 7?
Carlos -
How do I fix my iPad if it won't upgrade to iOS 5? I have iTunes on here and every thing else I need what do I do?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
Message " not taken care size (format) of image"
Hello,
I possess Aperture 3.5.1 and Mac OS X (mavericks) and plug-in Border fx, collection NIK softwave. (My camera is a Canon 6D). I use 2 Internet browser : "safari" and "chrome".
For several months, very often, when I move on miniatures, in particular after the use of Border fx, the image RAW becomes black with the message " not taken care Size(Format) of image ". I must to leave Aperture, to open him again, to open in full screen the image in error, so that it displays again.
Have you got a solution?
Thank you for your help.A quick update - I had a 28k jpg, which when saved to the database in the dodgy format is 33k. I found if extract this and save (via ImageIO.write) to disk as a PNG, it is now apparently a 'standard' format (also loads ok in web browser), however the size is 400k! If I load that png file (using ImageIO) off disk and save back (using ImageIO), the size is 33k again and it's reverted to the broken format! How is this so?
I've found if I load the png and save as jpg, both steps with the old JIMI api, it converts back to a 28k jpg which seems to be totally ok. (We use the Jimi api for conversion of .pict files.)
Any ideas what is going on? -
So my phone a 4s is less than two years old, the speakers do not work, and it will not connect to wi-fi, so my question is on the 1st of august why should I re-up my contract and purchase a phone that taken care of did not last the distance of a contract?
This is a user to user technical support forum. It is not our responsibility to convince you of anything.
Do you actually have a technical support question? If not, post your question on a blog or somewhere more appropriate.
Best,
GDG
Maybe you are looking for
-
I use Oracle 10g ....... but when I used that function in :- Oracle® Database PL/SQL Language Reference 11g Release 1 (11.1) B28370-02 September 2007 page 252 CREATE OR REPLACE FUNCTION compute_bonus (emp_id NUMBER, bonus NUMBER) RETURN NUMBER IS emp
-
"Permanent Error in BPE inboubd Processing" if payload is incomplete
hi all, I have an BPM scenario and when payload is wrong or some field in the payload is missing i am getting "Permanent Error in BPE inboubd Processing" error. I have searched on SDN for same and found two blogs which might be helpful /people/henrik
-
Episode of established podcast not showing up in iTunes. Why?
It usually shows up quickly, but today, nothing I do will make it show up. My feed is http://www.publishersweekly.com/pw/podcasts/pwcomicsworld/index.rss What's going wrong?
-
hi, I have small problem with ProgressMonitor. This is how I create it: progressMonitor = new ProgressMonitor(guiPool.getMainFrame(), message, note, 0, mediaIds.size()); progressMonitor.setProgress(0); progressMonitor.setMillisToPopup(100); progressM
-
Music bought from iTMS skipping
So, I bought an album on the iTunes Music Store. Two of the tracks suffer from skipping. I reported the error (there's even an option in the drop-down menu that says "This item sounds or looks bad"), and got the most useless customer service answer e