Things to know before building a Mega 651 (and other things you should know afte
Okay, following hot on the heels of the "things to know" series on Mega 180 and 865, I thought I'd just chip in with this short post on what you should know before splashing out on a nice budget Mega 651
PROCESSOR SUPPORT:
The official list of supported CPUs can be found here:
http://www.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=431&kind=4
Basically the ageing SiS651 chipset does not support Celeron / P4 cpus above 533mhz, and does NOT support the newer "Prescott" core cpus
Celeron > 400Mhz FSB
P4 Northwood > 533mhz FSB (512kb L2 cache)
MEMORY:
Basically to add to what is listed in the 865 "things to know"; from my own experience of using MSI motherboards in the past, ALWAYS use good quality branded memory, as using cheaper "generic" types inevitably leads to major problems. I know for a fact that Crucial, Kingston and Samsung types work well in MSI motherboards, and you should be okay with other high-end brands like Corsair and Geil.
DRIVERS:
DON'T bother using MSI LiveUpdate! The drivers provided on the cd supplied will work, but if you wish to download the latest drivers, you will find them here:
http://download.sis.com/
Download and install the:
Chipset Software > SiS AGP (Gart) Driver
IGP Graphics Drivers > SiS650 and 740 series
http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
for Realtek AC97 Audio drivers
http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=1&famid=3&series=16&Software=True
For Realtek Onboard Network interface
The modem drivers supplied on the CD should work, I really don't know much about them as I have never used them (sorry). Failing that, if you are connected to the internet, Windows Update should be able to find them for you.
OPERATING SYSTEM SUPPORT
MSI state that only Windows XP is supported on Mega 651 (and other Mega barebones). Other versions of Windows (98, ME, 2000) will work provided you have drivers for hardware devices, all of which are provided on the install CD or from the links supplied above.
You'll find that earlier versions of Windows won't have the drivers for the built-in card reader, so you may have to do a "google" search to get them. On my Mega 651, they are listed in Device Manager as "OEI-USB" devices.
If you haven't already got Windows XP then I suggest you consider upgrading at the earliest opportunity; Microsoft themselves no longer support Win 98 / ME and most new software is being designed to work only with Windows XP
Please note that MSI do NOT supply or support drivers for Linux; if you wish to attempt to install Linux on a Mega 651 (or other Mega PC model) you will need to obtain drivers yourself. The remote and LCD display functions will also not be available under Linux, unless some clever bod has developed drivers to do so.
MEGA RADIO AND LCD DISPLAY:
Download the Mega LiveUpdate for Mega 651 from here:
http://www.msi.com.tw/program/support/software/swr/spt_swr_detail.php?UID=431&kind=4
This will update your MEGA Radio program, update the BlueBird HIFi module firmware and allow you to set a "greeting" displayed on the LCD display when you switch on HiFi mode. Apart from that the LCD display serves NO other purpose in PC mode.
After updating the firmware, you should power off your Mega 651, unplug the mains power cord for a few seconds then reconnect and restart for changes to take place.
OTHER MSI SOFTWARE:
If you REALLY must try out MSI Media Center III, it does work on the Mega 651, but I don't think the remote will work correctly.
Although PCAlert 4 has been reported to work on the Mega 651 - having read the numerous problems most users have, I don't advise installing it. If you do get it to work correctly, unlike on the Mega 180 and 865, it will not display temps or fan speeds on the LCD display, as this feature only works on the 180 and 865, as they use diferent LCD displays.
EXPANSION CARDS:
Same as with other Megas, you get 1 AGP and 1 PCI slot.
The AGP slot only supports up to 4x cards; a faster card will work, but only at 4x.
Space is limited, if you decide to fit a PCI TV tuner card, you will be limited as to which AGP card you can fit. A full length card is probably not recommended, and a model with a slimline (or even passive) heatsink would be best.
A better alternative would be to go for a VGA card with built in TV tuner, such as MSI TV5200-VTDF128 or an ATI Radeon All-In-Wonder card (ATI AIW is supported in WinXP MCE05)
ON-BOARD VGA
The SiS651 chipset is pretty old now, and the on-board SiS650 VGA is not up to playing any of the latest games, as it is only DirectX 7.0 compliant and does not support Hardware Texture & Lighting. However, it is adequate for playing back DVDs as it supports hardware acceleration (in PowerDVD for example), and general video output is decent. The maximum shared video memory size is 64mb.
The Mega 651 does NOT feature TV-out as standard. You can however either buy an AGP video card which includes TV-out feature, or the Mega TV-out card (availble in UK from www.dabs.com). Please note, this card is ONLY for Mega 651, and does NOT work with the 865 model. (The 180 does however, thanks to nforce2 chipset, support TV-out as standard)
ON-BOARD AUDIO
The Realtek ALC650 AC97 audio codec offers 5.1 surround sound (with suitable speakers of course ) as well as SP-DIF for digital output.
The sound quality is quite reasonable; i'm currently listening to MP3s through a set of Creative Inspire 5.1 speakers, and its certainly good enough for me.
There are three audio connectors on the rear, they default to:
GREEN - Front speakers
BLUE - Line In
PINK - Mic
To connect surround sound speakers correctly, you need to use the Realtek audio configuration tool (located in the Taskbar by the clock). Set the speaker config to 4 or 6 channel (5.1) and then click on the boxes to the right to configure the rear ports correctly
GREEN - Front speakers
BLUE - Rear Speakers
PINK - Subwoofer / Centre Speaker
NOTE: If you do decide you want to install a PCI soundcard, be aware that you will lose the Radio function in PC mode, and for audio output in Hi-Fi mode you will need to reconnect audio plugs from your soundcard to onboard sockets. The Hi-Fi mode and Radio only work with the onboard audio.
POWER SUPPLY
All the Mega series barebones come with a 200w PSU. Don't even think about upgrading to a higher output type, as the Mega PSU is a non-standard type. A standard ATX PSU will NOT physically fit inside the Mega case. Besides which, the Mega series have a special connector which powers the Bluebird hi-fi module and on-board sound when the PC is off. And there is a special Molex power connector for the CD/DVD drive, also for that to be used when PC is off.
WINDOWS XP MCE 2005
Media Center 2005 requires a DirectX 8.1 / 9.0 compliant video card with a minimum of 64mb RAM, 128mb RAM is recommended, however, for best performance. So you will need an AGP card, because SiS do not provide any MCE-compatible drivers. The TV@anywhere TV tuner (MS8606-10) and Mega TV Tuner (MS8606-40) are not supported by MCE05, because MCE2005 requires a TV card that will provide a direct MPEG2 stream, which a PVR card such as the Hauppage PVR MCE series can do (as a hardware card, MSIs card are software only and rely on drivers to do MPEG encoding), or a dedicated DVB-T card which receives an MPEG2 signal over the air.
MEGA 651 REMOTE
If you fit an MSI TV@anywhere card to your Mega 651, the Mega remote can be used to control the MSIPVS software, providing you use the remote receiver supplied with the TV@nywhere card. The Mega remote is designed to work natively with the MSI Media Center, and MSI Mega Radio programs only.
If you wish to program the remote to operate other programs within windows, then you will need a program called Girder, and the accompanying MSI plugin, kindly provided by nathan. please see his sticky thread for more info, about his plugin, and how to obtain Girder.
BROKEN HEATSINK MOUNTING CLIPS
https://forum-en.msi.com/index.php?topic=96148.0
Phew, thats about it. If any other Mega 651 users think I've missed anything out, please feel free to tell me.
For other general hints and tips, look through the "things to know" posts regarding the 865 and 180.
MEGA 651 =
Quote
PROCESSOR SUPPORT:
The official list of supported CPUs can be found here:
http://www.msi.com.tw/program/products/slim_pc/slm/pro_slm_cpu_support_detail.php?UID=431&kind=4
Basically the ageing SiS651 chipset does not support Celeron / P4 cpus above 533mhz, and does NOT support the newer "Prescott" core cpus
Celeron > 400Mhz FSB
P4 Northwood > 533mhz FSB (512kb L2 cache)
your processor is not supported. please start a new thread if you need help
Similar Messages
-
Things to Know Before Building Your Mega 180
Some people have asked me for a list of tips so here is my attempt---I'll ask Wonk to sticky it if it turns out OK....
Feel free to PM me with more tips---I'll add as necessary....
TIP SHEET FOR THE MEGA 180:
So you bought that new Mega 180 and the docs leave a lot to be desired......Don't panic!! Take a look at this tip sheet. Should save you a lot of hours!
RAM AND PROCESSOR:
Several things here.....If you are going to use onboard video----you should NOT use higher RAM than PC 2700----waste of money to buy higher as the Nforce2 18G "Crush" was only designed to run no higher than with DDR333 RAM (PC2700). Nvidia warns against it on their site. I have personally experienced a LOT of problems when you try to run the onboard at DDR 400 (PC3200)----trashed Bios in most cases. Also---the 18G and to some extent---"Dual Channel" is picky about memory----try to get a matched pair of DIMMS----and if you REALLY want to be on the safe side----go to Nvidias site and look up the page that lists known, compatable memory with the NForce2 chipsetNforce2 compatable memory. I use A-Data 512 sticks---but they are hard to find.
If you are going to use a Vidcard---then higher memory is just fine----but if you are NOT planning on overclocking-----there is really NO need for higher than PC2700 as the default bus for Barton 2800+ and below is FSB 166 (DDR333---PC 2700).
Alyways run your RAM (Synch) 100%---do not play with dividers if you are using the onboard video. If you have no clue what I just said----you are fine as the defaults will take care of this----this last was for overclockers.
Processor----I like the cost of the Barton 2800+ right now----fast, cheap and even using the onboard and no overclocking----you have a fast machine that can do anything. The 2800+ also leaves the door open for a slight overclock (I have not tried this yet) without too much stress on anything.
LCD PANEL:
Do Not----I say again----Do Not use the "welcome.exe" program----or ANY other program on ANY disk or the MSI website to do ANYTHING to your front panel. That program is for the Mega 651 model and WILL TRASH YOUR LCD. The LCD panel works just fine----it doesn't need any updating.
If this advice is to late, the firmware fix is in here:
https://forum-en.msi.com/index.php?threadid=46355&sid=
Do download and install the latest version of PC Alert MSI Mega 180 Downloads----works great with the front LCD panel and displays PC info nicely.
Use the EQ mode buttons while playing in the HiFi mode----changes the sound a lot and also the display changes------COOL!
OPTICAL DRIVE:
Use an MSI optical drive----basically anything from MSI will work fine---some other drives are reported to work fine like a NEC 2500A----but if you use an MSI drive----you can't go wrong. You might want to put the drive in another machine with a floppy first----and download and update that drive to the latest firmware (most will require a floppy to do that and the Mega 180 has none.)
CABLE MANAGEMENT:
Buy a dollar pack of cable ties and go to work-----make sure ALL cables are away from the front of the intake fan for the CPU----you want a very clear path to the cooler. Less clutter---better airflow. Better airflow----lower temps.
CPU INSTALL:
Get rid of the MSI thermal grease with some Goof Off or acetone-----and get some good Arctic Silver 3, AS5 or AS Ceramique. Clean both the chip top and the bottom of the HS with denatured alcohol before applying the thermal grease. You might also want to lapp the bottom of the HS which is not very well done----but I found it not necessary. The HS/Fan unit is very easy to install----just rotate your screw down points as perscribed by the sticker on the cooler----don't tighten one screw all the way down----then go to the next.
DRIVERS:
I found the drivers on the install disk to be non-functional---- get the latest drivers from the MSI website (you can use Live Update for this) or go to http://www.nforcershq.com and get the latest Nforce2 Driver Remix from Morpheus1 or Mwarhead.
DO NOT use the Nvidia SW IDE driver (say "No" when it asks you in the driver install) Only use the ITB (In The Box) IDE driver----it's the default driver. Your Optical device will probably not function correctly (eject, etc) with the Nvidia SW IDE driver.
Nforce2 SoundStorm Drivers are a tricky topic----there are TONS of versions out there.... I've had the best luck so far with Drivers 4.31 (Off Microsoft Windows Updates---it was a Driver Update) and Audio Control Panel 4.31. Nvidia has a driver update package now JUST for audio-----posted Here
If you are having problems with Media Center III crashing----it seems to be a conflict between the SoundStorm Drivers and Media Center III, Uninstall your Nvidia audio devices in the device manager (Three of them----there is one hidden---so go to view and "show hidden devices") then reboot and let Windows rerecognize your devices and reload drivers. This will solve most problems until Media Center II has another bad crash----in which case---you may have to do this procedure over again. You can tell if it's really hosed up because the radio sound will come on automatically at boot----or you will have lost the SoundStorm Control Panel Icon in the SysTray. I'm working on different versions of SoundStorm to see which works best---will update if I find anything new. (Update)----4.31 seems to be the best but I still can'ttotally eliminate the crashing in Media Center III.
Once you get your Lan device up and running (or your modem) Go to Windows Update and make sure you are completly updated with all latest window updates---If using WinXP-----you need to be at WinXP ServPack 1a when you are done.
Use Windows Cleanup and Defrag when you are done----ESPECIALLY cleanup---to get rid of any left over temp files in the Mega----To get the BEST and most optimised defrag----run windows defrag at least three times in a row----maybe more----it will REALLY optimise the drive.
TV CARD:
The main TV Card designed for the Mega 180 is the MSI 8606-40 Mega TV Card----be careful to get it vice the other version of the MSI 8606 which is the MSI 8606-10 TV@anywhere Master.
The Mega TV Card does not include a Radio while the 8606-10 DOES include a radio. Since your Mega 180 already has a radio----you absolutely don't need or want the 8606-10 TV@anywhere Master.
Do NOT use any drivers or software you receive with the Mega TV Card MSI 8606-40----just set the disks aside. You will ONLY uses the drivers off the Mega 180 Install Disk.
The Mega TV Card MUST be installed before the menu item for "Install TV Tuner Drivers" becomes visible on the Mega 180 install disk.
Make sure your TV Card is hooked into the line called "Remote Control" within the Mega 180 itself----there is a small 3 inch connecting wire in the TV card box.
The TV and Radio function well with the remote----but you must have MSI Media Center III installed. I could not get the TV or the Radio to work without Media Center III.
Upon initial setup of the TV within Media Center III---you may have to switch the source between cable and antenna to get the initial channels to auto scan. Once done auto scanning---switch back to cable as source (assuming you have cable).
Using the remote to force the TV screen to full screen: When you use the up/down arrows on the remote----watch the menu items on the screen----the various menu item buttons will highlight as you hit the arrows.
Once you have highlighted the little arrow button on the lower right of the screen----just below the TV display (it will turn green)----hit the ENTER key
It goes to widescreen----hit the ENTER key again------it goes to fullscreen
BTW, the remote works fine-----the trick is you HAVE to have Media Center III installed and available to be called for it to control the TV Card----Radio Etc. It will start up normally when you push the TV button on the remote.
BIOS SETTINGS:
The defaults will mostly work. One thing----to get BEST performance out of the NForce 2 Onboard video----set AGP to 128 and Set Frame Buffer to 128----I had crashes with almost any other video setting. I'm still playing with PCI clock, voltages, and some other settings to get better stability-----will let you know.....
6 CHANNEL SOUND
Use all three ports in the back of the Mega 180 and then configure it using the SoundStorm Control Panel----Use the "Speaker Setup Wizard". Check and adjust using the "Test Tone" button. I'm using an inexpensive set of Analog Altec Lansing 5.1s----the sound is excellent.
That's all for now----tell me what else you've found and I'll post.
JohnMy MSI MEGA 180 has a strange display on the monitor.
I opened the boxed removed all items.
Installed the CPU (supported on the CPU compatability list for the MSI MEGA 180), installed the heatsink & fan.
Installed the HD drive.
Installed the MSI DVD+/-RW
Installed 1 DIMM module of DDR RAM PC2700 333MHZ 1GB
Pushed the Power button for the PC and the desplay is corrupted.
I tried the 4 possible configurations for Jumpers 7 and 8 to alter the FSB speed with no luck.
I also tried the 4 different J7 and J8 configurations without having the HDD and DVD-RW drives connected - same result.
I also tried the 4 different J7 and J8 configurations with the Secondary VGA output connected to my monitor.
I also tried the 4 different J7 and J8 configurations with the S-Video output connected to my TV and no signal at all.
Both my monitor and HDD work fine with my other PC.
I noticed the jumper pins are not numbered - made the configuration job a bit more tedious.
Please note the LCD screen works correctly, however the redio tuner in HiFi mode doesn't pick up any local stations.
As I am a Software Test Engineer, I am 100% confident I have checked all possible configurations including clearing the CMOS, but the system simply will not display to the VDU. The POST should at least be visible when Power is turned on for the PC mode.
NOTE: I will update the RAM Brand as soon as I find out the title from the supplier, but I believe it is OEM.
NOTE II: this is the URL to the CPU used: http://www.excaliberpc.com/product_info.php?products_id=1798
PLeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesssss ssssssssssssssssssssssseeeeeeeeeeeeeeee eee help ease my pain!! -
I am fairly new to using Mac computers, I would like to know how to uninstall drivers, software and anything else I may install on my computer. With PC it's very easy, you go the control panel, locate what you want to uninstall and with a few clicks it's done. Can someone please help me? Thank you.
See these:
Switching from Windows to Mac OS X,
Mac Basics—Tutorials on using a Mac,
Mac OS X keyboard shortcuts,
Apple How-To Guides for Mac OS X,
Anatomy of a Mac,
MacTips,
Switching to Mac Superguide, and
Switching to the Mac: The Missing Manual, Mavericks Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist,
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac. -
My Wife got an iPhone at work. IT set it up the first time on another machine, they finally install iTunes on her machine but I don't know if she can sync without loosing Photos, SMS, and other things. She had six months of stuff on that phone?
The problem is she can't update to new software until she connect to iTunes, but she don't want to loose all that info.
My question is:
If she register her apple ID on that new computer, and sync the phone, will she loose everything? or iTunes will back up first (because apple id match) and then sync.
Otherwise, how can I do it? The closest apple store is 3 hours away. thanks!Before you connect to a new PC, make sure that autosync is disabled in Edit/Preferences/Devices, otherwise her phone will be wiped during the following sync.
If she has data on the phone she wants to save, back up manually:
Disable autosync in iTunes, connect your phone to her new computer and right click on it in the device list and choose backup. iTunes will backup your phone without syncing. Transfer the purchases the same way, choosing "transfer purchases" this time.
When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the phone for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Transferring data is also covered here: http://support.apple.com/kb/HT4137 -
what is the name of that thing that appears before a film, in black and white, with numbers counting backwards and with circle motion ?
Thanks a lot, not only I got what I needed, but also discovered a great site
thanks
fp -
Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.
Where are addresses kept on MAIL? I don;t like the new format at all. Frances
Begin forwarded message:
From: Frances Topping <[email protected]>
Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
Date: August 25, 2014 at 9:46:01 AM EDT
To: discussions-replies <[email protected]>
Old Entourage is POP and new Mavericks MAIL is IMAP I believe. I don;t know how to export in the forms you mention. Frances -
I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?
Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format. -
Everytime I click on something whether it's on Google or opening an Email etc.. I get a pop up ad appear in another tab. I have tried everything to stop this increasing the pop up blockers and other things it still happens. I don't know what i can do to fix this?!
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/ -
What to do to back Clear private data and other things I loose?
It has about 15 days ago, it appear window Firefox on my desktop, to download 3.6.13 version. Inside this window wrote "URGENT" in yellow color, and attention, "computer online attack". When I finish to install this Firefox, I saw that I loose Clear Private Data and other things I had in the first line, on the top of computer (sign of mail etc.), and things where is the star and flash. 1. Was it yours or send it to me someone else...? 2. Does this 3.6.13 include Clear private data? 3. What to do to have again Clear private data? Please, wrote step by step, 4. What to do to back other important things I loose?
You may have picked up a malware infection by allowing that install.<br />
You should never respond to such unrequested pop-ups.
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
* [[Searches are redirected to another site]] -
Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.
The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.
-
I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.
Davin12 wrote:
I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.
Icloud or itunes backup, only backs up app data, not the app itself.
so if you restore as new, then there is no app data on your phone, you start out new... -
hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.
Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best. -
Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you
You need an Apple TV to be able to wirelessly send pictures etc. from iPhone.
However you can buy an adapter if you want to connect to a TV
http://store.apple.com/us/product/MC953 -
I am having trouble with my mac book air. I think I have a virus because everytime i click on a link it openes up popup windows and other things. How do I reset teh computer?
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply. -
When is Apple going to start working with ADOBE and let us enjoy some videos and other things on our beloved iPads and iPhones?
How totally clueless can one be?
Apparently not more than you.
Adobe has given up on mobile flash for any device. They announced this a while ago.
They admitted mobile flash is a disaster and are jumping on the HTML 5 bandwagon.
Adobe has moved on, why can't you?
http://www.technobuffalo.com/mobile-devices/adobe-announces-the-end-of-flash-pla yer-for-mobile-devices/
http://latimesblogs.latimes.com/technology/2011/11/adobe-to-end-mobile-flash-plu g-in-development.html
Maybe you are looking for
-
Going to Australia and need help with Power converters
Facts: US uses 110v on 60hz Australia 220v on 50hz Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save t
-
Firefox wont open for windows 7
I have downloader firefox installed and wont open the solution of the start task bar end processes will not work because it requires you to try and open again. wheni click on it it acts like it will load and nothing happens. new computer with regular
-
JBO-35007: ready to go postal....
Hi, ADF BC/Faces 10.1.3.4 Error: JBO-35007: Row currency has changed since the user interface was rendered Two pages with editable table connected by command link including set current row with key on the link for detail page. Back button is not bein
-
Presentation Director loses settings when switching between Chinese and English
I've done the "Install files for East Asian languages" and then set the "Language for non-Unicode programs" to "Chinese (PRC)". I do this for our presales people so they can show our prospects that our software is translated (for those that have plan
-
hi , i am working on creation of Zshipment idoc , which resembles the same as shipment05 idoc but i have added some zsegments in the custom idoc . My question is whether i can continue using the standard messge type or shall i create an Zmess