Think I figured out the Ducking bug

As I continued to work with my project to get ducking to work across adjacent clips, I figured something out. Ducking across adjacent clips does not work if there are certain transitions between those clips. When I remove the transitions, the ducking works as intended. The only transitions that do work with the ducking are the Fade thru Black and Fade thru White, these are the only ones you can use when ducking across adjacent clips, or no transition at all.
Hopefully this will be resolved soon.

Hey Renesis9k,
I'm getting a similar problem here. We have an iMac 24" loaded up with iMovie 08 and ducking is buggy. For our problem, we had placed transitions after every clip (30 seconds - 1.5 minutes) and ducking only seems to work for every other clip. However, as we significantly reduce the amount of transitions to between chapters and use sparingly, the problem goes away. So I would also say that the transitions seem to be the source of the problem. iMovie 08 makes creating movies very quickly easy, but its quite buggy to the point of annoyance at times. I like but don't like iMovie 08.
Hopefully a fix will occur in the new year that will bring back a lot of the manual features that made the previous version nice to work with, such as audio controls and the ability to create markers. I'm constantly going back and forth between programs in iLife 08 to make the changes I want, instead of editing in one nice program. iMovie 08 is in its first iteration, there are definite growing pains, so I hope it gets better.

Similar Messages

I think I figured out the problem uploading iMovies to YouTube.

When using an iPhone, iPod, or iPad to record video, YouTube basically treats it like any mobile to social networking post--you hit share, choose YouTube, and that's it whether you're loading from the Camera Roll or iMovie. But if you shoot with something other than a mobile device's camera and have difficulty uploading to YouTube it seems the problem isn't Apple, but rather a simple change you need to make to your YouTube account.
Simply: Add a Channel That's it, the whole solution.
Now the only thing you need to be aware of is, despite the fact that your Apple device with Retina display can play video in greater than 1080p, YouTube doesn't recognize any mobile device's ability to do this. So if you upload a video in 1080p, it will only be viewable via YouTube on a desktop computer. 720p however is just fine.
So if you shot your video in 1080p, but you want it to be viewable on mobile devices using YouTube, go into iMovie and upload the video in 720p.
That's it. Please feel free to shoot down my theory and make your own suggestions.

Hi,
I am trying to display an RSS feed on my website as well. I
haven't figured it out.
Can you help?
Thanks,
H.J.D.
[email protected]

I think I figured out the answer to my question above. (I hope.)

.
Message was edited by: Lorna from Hawaii

I like to give credit to where credit is due, thanks again, hopefully this helps others out there too cause apparently many others are having the same problem

I think I figured out the half-speed song problem

Steve, my songs only play at normal speed if I'm logged onto a webpage with a flash player. Any toughts as to why this is the root of the problem?

Flash projects typically use an audio sample rate of 22,050Hz. Your audio device sample rate is reset by Flash and is (likely) not informing Audition (by way of the ASIO driver, or within the wrapper) of the change. Audition is still pushing 44,100 samples for each second of audio, but your device is only playing back 22,050 of those per second giving you the half-speed effect.
I don't recall what audio device you were using, though I know you mentioned it in another thread. The best solution for this issue would be to find an ASIO driver for your device, if one exists. If not, you can try using the ASIO4ALL driver, from www.asio4all.com which acts as a go-between for ASIO programs and WDM-devices. This driver might better recognize changes in hardware settings that don't get reported by the Windows audio driver.

Unable to figure out the classnotfoundException

Dear Members,
I have an applet on which I want to show images. I have put .class and .html in the same directory and the images in the images directory.
I'm usong Tomcat 5.5.4.
Note: I have created certificates and also policy files for the applet.
When I run the same code using eclipse, the code is working fine.
And when I try to run in the browser its throwing the following Exceptions.
java.lang.NoClassDefFoundError: AdminApplet1$1
     at AdminApplet1.init(AdminApplet1.java:74)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source) Where AdminApplet1 is my applet.
Following is the code written in the .html
<applet codebase="http://localhost:8080/project/"
        code="AdminApplet1"
        archive="SAdminApplet1.jar"
        height=400
        width=600 >
</applet>where SAdminApplet1.jar is signed jar.
I'm trying to figure out the problem since last 2 days. If you want more details about the problem please let me know.
I have referred http://java.sun.com/developer/technicalArticles/Security/Signed/
for creating the certificates
If you think I've gone wrong while creating the certificate then please show me a way.
I'm looking forward for the helping hands.
Thanks.

Please put all the class files in the jar.
Considor this example:
import java.applet.*;
public class test extends Applet {
     public void start() {
          System.out.println("this is start");
          try{
               System.out.println(System.getProperty("java.version"));
               (new subTest()).printSomething();
          }catch(Exception e){
               e.printStackTrace();
     public void init(){
          System.out.println("this is init");
     class subTest{
          void printSomething(){
               System.out.println("something");
}compiling with javac test.java gives me:
test.class
test$subTest.class
When I remove test$subTest.class and open the applet with a html page I get:
java.lang.NoClassDefFoundError: test$subTest
(looks familiar?)

I need help figuring out the best way to convert analogue video to DV so that I can edit it.

I have a large number of VHS and hi8 tapes that I want to convert to high quality DV.
I have a couple of options. One is an Elgado Video capture system.
The other is a Sony Digital Media Converter Box (DVMC-DA2).
I have tried a few of the less important tapes using the Elgado Video Capture system. It only allows you to convert to MPEG4 or H.268. It is not very good quality, especially for archival items or items I would later wish to edit.
I also have the Sony Digital Media Converter Box. I have heard that this is a superior option. So far, though, I have only been able to figure out how to import using an old version of iMovie HD. This makes a large imovie project file (approximately 6.18GB for a 28:30 clip vs a 348.9MB for an MPEG4 using delgado.
On top of that to convert the file from an iMovieProject file to DV is an additional step that so far looks like will take a half an hour at best.
Is there any way for me to import VHS/hi8 tapes using the Digital Media Converter Box to creat high quality DV files directly? If so, where can I find this info? What steps should I take and what are the settings I should use.
I have a lot of tapes so I want to figure out the right and most efficient way to do this because I will be repeating it a bunch of times and would hate to have to start over again.
I should also mention that I am using a Mid 2010 MacBook Pro, with OSX 10.9.1
I'm sorry in advance if this seems like an obvious question, but I have been googling and looking at tutorials on the site and just have not found the answer. There are a lot of ads for expensive low quality services to do this converting for you, so maybe the answer I am looking for is burried in all that advertising.
Thanks

Thanks Biggles and Gotz. I just couldint find capture, but now I can! (It was right under my nose too).
I'm trying it now and it appears to be working. Do you have any other recommendations for capturing from hi8 video source as far as setting go? I am using DV to capture. Are there any other settings I should pay attention to?
There is an extra line of video noise at the bottom, but when I google it, it sounds like it won't show on most standard tvs and if I want to fix it for online, that I should mask it after the fact vs scaling up the video.

Is there a way to figure out the name behind an Apple ID?

Is there a way to figure out the name behind an Apple ID? My oganization uses an iPad as a kiosk. Somone accessed the iPad, changed the Apple ID associated with iTunes, downloaded a game and set a password to lock up the whole iPad. We had to completely restore the iPad in order to access it. When I tried to upload a new app, a different Apple ID popped up, and I'm assuming it was the person who locked the iPad and downloaded the game. I would like to figure out who owns that account, just so we can not allow that person access to the iPads anymore.
Is there a way to do this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Perhaps with a court order because the person committed a criminal act. Otherwise it is doubtful that Apple would violate the privacy of a client/account holder just on your word.

Is there a way to dynamically figure out the FIRSTROW & LASTROW using Bulk Insert?

I noticed most of my files follow a certain convention, so I can use Bulk Insert with this:
FIRSTROW = 2, LASTROW = 224
However a few files have many more records. I'd like SQL Server to dynamically figure out the first and last rows with data, but I don't know if that's possible. Can someone confirm?
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Nope, you would need read the files from some program. Could be a CLR stored procedure if you want to do it from SQL Server. But from BULK INSERT alone, no.
Erland Sommarskog, SQL Server MVP, [email protected]

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

How can i figure out the answers to my security questions if i forgot the answers

how can i figure out the answers to my security questions if i forgot the answers

Welcome to the Apple Community.
Start here, and reset your password, you will receive an email with your new password, then go tomanage your account > Password and Security and change your security questions.
If that doesn't help you might try contacting Apple through iTunes Store Support

My iphone got stolen. how do i figure out the emei number?

my iphone got stolen. how do i figure out the emei number?

Here is what you should do:
http://support.apple.com/kb/HT5668
And here is how to report the theft:
http://support.apple.com/kb/HT2526

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page. I can't figure out the rename function either. Help?

My MacBook pro mid 2012 doesn't seem to have a "save as" function, so I can't seem to save multiple page pdf's together after moving thumbnails into the sidebar. It only saves the first page.
I do have a 2008 version of Microsoft Office installed to save money, but that shouldn't affect things. I can't figure out the "rename" function either. Help?

Oh, and I also reset my NVRAM, my computer hasn't frozen again yet, so I'm not sure if it has made a difference.

HT204053 Help me figure out the restrictions passcode

Help me figure out the restrictions passcode i need to get on to restrictions

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
6. Restoring iPod touch after forgotten passcode
7. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode

I Ipod class wont play TED and other video podcasts. The genious bar could not figure out the problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem.

My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts). The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem. This problem is not isolated to a single computer. Secondly, the convert to ipod version feature in Itunes does not resolve the problem. Lastly, I tried restoring the ipod to no avail. I've heard this is a video codec problem.

See this extensive older thread on the issue.
https://discussions.apple.com/thread/2813428?start=45&tstart=0
B-rock

Help! I figured out the problem - sort of.

So I posted my problem two days ago. I found that only some of my pages were loading in Firefox 3. I didn't know why (see below for original posting).
With a little experimenting, I have found that republishing the pages that "work" actually causes them to no longer work. I'm pretty sure I published these pages that worked with previous versions of iWeb. Now that I'm using the latest version of iWeb, any new pages (blogs) cannot be viewed by Firefox 3.
Is there anyone out there with a work around? Solution? Anyone?
HERE IS THE ORIGINAL POST:
HELP- Take a look at my pages- What's wrong?
Posted: Nov 19, 2008 3:19 PM
Reply Email
Here are links to my pages: the first link doesn't load in Firefox 3. The second link loads fine. I can't figure out the difference between the two pages. Any web gurus out there that can determine my problem? I really want people using firefox to be able to view my site.
THANKS!!
LINK 1:
http://web.me.com/reeldamian/DAMIANDP.COMNYO/COMMERCIAL_REEL/COMMERCIALREEL.html
LINK 2:
http://web.me.com/reeldamian/DAMIANDP.COM_NYO/FX/FX.html
Message was edited by: 3pointer

I installed oracle apps 11.5.10.2 using steps given in thread and I didnt have any problems. I then installed it on my friends laptop and it worked fine. but recenly it stopped working in my laptop, i was not able to open login page from main url (http://www.msb.ora:8000) it gave error : page cannot be found
So i reinstalled it on fresh system again.. but since then it not working. I have tried atleast 9-10 times and everytime it ends up with same error "jsp is not responding", I am able to open the rapid install main page but I am not able to open login page. it says page cannot be found. i followed all the steps suggested by you guys in this thread to solve this error, but still have no luck.
I have tried following steps to solve the issue
1) As its recommended to installed apps on fressh os without jdk i did the same, as i didnt worked i tried installation with jdk preinstalled,
2) i have tried on both windows server 2003 and win xp professional
3) I tried to change the jdk path in jser.properties file
I will really appriciate any help to solve this problem. Below is system details:
os: windows server 2003
ram : 1gb
processor: 1.83ghz core 2 duo
Oracle apps 11.5.10.2
java version: 1.4.2_04 ( installed by rapidwiz)

Think I figured out the Ducking bug

Similar Messages

Maybe you are looking for