Think i have a problem with my Video card help ???

Hi Guys
Ok reason why i think this i currently have a black screen
I can still use the mac via screen share from my G5 so i know all is ok & i am currently making sure i'm backing up
I have tried to connect it to an external monitor but the mac doesn't register that there is one there
One other strange problem i can type ok but i cannot use my trackpad while i am in screen sharing mode
Any help would be great
Thank You

Well it's either your graphics card or the inverter for the screen I'd guess - either way the only people who can fix this for you are Apple.
The fact that it doesn't see an external monitor would suggest it's the card ...
I know this might sound like a dumb question but you have turned the brightness up fully and tried a PRAM reset haven't you ?
Parameter RAM reset - hold down command/option/p/r keys at start up and wait for three chimes before releasing the keys.

Similar Messages

I think I have a problem with Mavericks: can anyone help,please?

A couple of days ago I installed Mavericks on top of my existing Mountain Lion OS. Not before I backed up the ML version with Time Machine, though.... :-)
Initially I thought everthing was fine, but then started to notice a few things that bothered me, which have not gone away. In fact, I think this install is now a potential problem. Unlike many other people, elsewhere on this forum, I have not noticed the calamitous slowing down and general unusability of Mavericks. I'm using a prety new i7 iMac ( the new flat one) with 32 GB of RAM.Everytihng worked great with Mountain Lion. However, The following anomalies have cropped up: Mail is taking over 30" to send a simple email. In ML it was almost instantaneous. I feel that Mail is not performing as it did in ML, and the same goes for Safari. It "feels" odd and slow and can take an age to load up pages. In fact one particular page would not load properly at all, but worked fine in Firefox. In the end got it to work in Sfari, but ithis type of behaviour doesn't instill confidence. Things got wierder...
An update to iMovie got " stuck" in the dowload process,and was perpetually downloading in Launchpad. It kept oscillating from approx 61 MB to aprrox 84 MB of a 1.94 GB file. Then I did a disk utiltiy test of my system drive and it suddenly stated that the drive need repairing. I booted up in Recovery Mode and tested the drive, which came back all clear! I booted up normally again and now the disk utility won't even complete a full diagnosis of the drive!It will diagnos all my other drives fine though.... :-s It keeps getting stuck on: Checking Volume Bitmap, and won't go any further. So, I did what some other person did on another thread, which seemed to clear up his problems; namely: simply reinstalled Mavericks from Recovery mode. This did not improve anything for me. The same issues remain. In fact as I type this, I notice that I'm using nearly 23 GB of my 32 GB of RAM, and all I have open is Safari, Disk Utility and Mail ! To quote Hans Solo: " I've got a b-a-a-a-d feeling about this..."
So, this is my long-winded way of asking: what shall I do? I would like to boot in Recovery Mode and reinstall my back up from an external drive. Does anyone have any advice about this,please? If I restore from my backup, will I actually get the ML OS back on the computer, or will I be stuck with Mavericks trying to impose itself ,as some people reported? I do want to use Mavericks, but not in the condition it's in right now. Also, really don't want to perfom a clean install and migrate everything over from the Time Machine back up....
Thanks for any advice.

I don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck!

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No pr

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?

I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.

HT1918 i have a problem with my prepaid card

i have a problem with my prepaid card i put all the correct payment informations and have a message
your payment method declined please enter valid payment information
<Personal Information Edited by Host>

We are fellow users here on these user-to-user public forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove the card details from your post, but if you read this post within 15 minutes of your original posting time then you should be able to edit your post yourself. But as people subscribe to these forums you may find that your card gets emptied.

HT2534 Hello! I have a problem with a credit card. I bought one program, after that i wanted buy one more, but it wrote that with my card something wrong. After that i wanted change my card (VISA) on "NONE". But there no NONE! I can't download FREE apps!

Hello! I have a problem with a credit card. I bought one program, after that i wanted buy one more, but it wrote that with my card something wrong. After that i wanted change my card (VISA) on "NONE". But there no NONE! I can't download FREE apps! Than I wanted make new account and select NONE, but there no NONE, there only cards. Help, please!

Hey Shamannnig!
Here is an article that can explain a little more about this situation:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thanks for using the Apple Support Communities!
Cheers,
Braden

Hi, i have a problem with my credit card so want to use a card from another country but cannot change my country settings

hi, i have a problem with my credit card so want to use a card froma different country but cannot change my country settings

Hi balalbas,
If you are having issues changing the country associated with your iTunes Store account, you may find the following article helpful:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Regards,
- Brenden

I have a problem with my credit Card ...

when i want buy some apps from App. Store i have a problem with my Master Card , but in Paypal i havn't any problem ...
Could you help me ?
Thx

You don't say what the problem is with your card. If your card will not accept the charges, perhaps it is maxed out or suspended, then it would not be acceptable to Apple. I am pretty sure that Apple would clear cards and credit levels before accepting an account with you.
I also believe Apple does not take PayPal.
If the first situation is close to yours then you will have to find an alternate means of setting up an account.

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

Hello,i have a problem with my gift card here in switzerland,when i want to redeem the cod says that the code is not good for i tunes....and i buy the gift card from the shop...any idea? thx

I have one of these http://store.apple.com/us/personalize/itunes?product=M9949
but the credit on it is 30 chf....i try to reddem into itunes and after all the steps i recive a message that says"the serial code is not good...." i don t know why say this....

Strange problems with nvidia video card

Hi, I don't know if it's really a problem, but I suppose...
I had in the last days serious problems with the nvidia card and ubuntu (see ubuntuforums or askubuntu).
Resuming I couldn't boot ubuntu if the nvidia card was enabled...
Now I only use windows because of this problem but I have another doubt: why the power manager sometimes don't show me the GPU usage (see image)?
In any case the nvidia (I think) is always working (the external monitor plugged in the DisplayPort works... I think that's a confirmation)
Another question: at times when I watch video on youtube the nvidia is enabled at others not... is this a problem of optimus or not?
For me it's important that windows works (no problem if ubuntu doesn't works.. I posted the links of the problems with ubuntu just for information on what's happened before this problem with windows..

I'm using Firefox with html 5...
But I also tried also with chrome, in which the html 5 mode in youtube is not activate, and I have the same problem...
I find it strange because if i have the monitor plugged in the nvidia GPU is activated (of course) and if i'm whatching a video on youtube when i disconnect the monitor the GPU won't switch to the intel but it still remains the nvidia activated until i close this video..

I have a problem with my microphone, please help if you can

Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.

Originally Posted by tav2000
Hello everyone.
I have a problem with my microphone. After i bougth Creative's sound card "Sound blaster X-Fi Xtreme Audio" and installed it, everything was allright and my microphone was working great, but this was when I used Windows XP, when i started to use Windows 7, it suddenly was very weak and i almost didn't heard it.
Currently, I have bouth Windows XP and Windows 7 installed, so I know the microphone is working when I am switching up between the OS, because it still works good on Windows XP.
If you can help please tell me.
I am using Windows 7 64 bit, I made sure the flexijack settings in the Audio controll panel are set to microphone and not line in, in the Windows 7 audio controll I have set the microphone volum to maximum and made sure it is configured properly.
Thank you for helping.
Hi tav,
While waiting for other forum members to post..
Perhaps you havent installed the latest drivers yet? (link HERE)
Cheers!

I have major problem with my SL. HELP!

Hello I'm newbie here. I need HELP! When SL first time restart and when it start up... I notice that my clock on top right corner the ":" didn't flash. It shows like 12 34 56 not 12:34:56.
So I look up the system preferences and the checkmark is still there beside "flash between the time separators. I tried to uncheckmark it then checkmark, nothing success.
Also I notice that the network / internet disconnected often not like the Leopard. I had to turn the AirPort off and then turn it back on. I check on Network Diagnostics and the Internet / Server failed sometime. I have no problem with that when I was on Leopard in the same spot (wireless shows full bar) before I upgraded to Snow Leopard.
Sorry for my horrible english grammar. I'm deaf that's why.
Any help? I would be great appreciate your help. thanks!
Message was edited by: TexDeafy

When I upgrade, it remaining in English nothing changed. But the network connection still have issue and the suggestion in other thread still don't work. The flash of ":" won't flashing. It still off even the checkmark is still there. UGH I need HELP since no body respond to my help!

My name is Frank and I have a problem with seeing videos. They all come up with "Blocked Plug-in" in the middle of the screens.

I'm having a problem bringing up videos, they all have,"Blocked Plug-in" in the middle of the screens.

There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again.

Can someone check if they also have this problem with music videos?

I have converted a 1 hour music DVD using Videora and it plays fine as a movie. I only want to listen to it so in order to not have to have the screen on I changed the type to 'music video' using Get Info and specified artist and album names. This displays the DVD in the Music menu as well as the Music video menu.
When I play it from the music video menu it is ok but from the music menu I get regular pauses of about 1-2 seconds every 3 - 4 minutes when playing it.
I have tried different DVD's and also different dvd to ipod software.
I would appreciate someone else letting me know if they have this problem.
Thanks

Doh, thanks Lane, setting TV Out to ON fixes the problem for me.
I guess the iPod uses a different process (or cashing) for videos played from the music menu to when they are played from the Video menu.

Genius needs to help! problems with my video card and system

Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
MSI Neo2 LS 865PE.....MAT=Slow
Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
Radeon 9700NP.....stock speeds ~>1.7V
AlienX case with 2 fan400 watt power supply and 6 case fans
Zalman Alum/Copper heatsink fan
1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007 with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.
I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory ) but I'm not sure what to do at this point.
I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.
I'm trying to get more info on how to run my system at a 5:4 ratio, also.
If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.

Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
I returned the 3 KingMax I bought, and still keep my old stick just in case.
2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
MY 2.4C's FSB was raised to 250 = 3.0gig
AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
CPU voltage: 1.5500
Memory voltage: 2.75
Video Card voltage: 1.7
Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is? I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

Problem with nvidia video card GTX670 in PS CC

I have been using PE10, but have just installed Photoshop CC v. 13.1.2 x64. Although my video card (nvidia GTX 670, 2 gb RAM) is recognized by Photoshop, when I check "use graphics processor" under "preferences/performance" the converted RAW image is somewhat blurred at all zoom levels (except 100%) compared to when it is unchecked and sharp (for both Canon 1100D and 6D). The problem may possibly reside in the RAW conversion, because if I convert the file with "use graphics processor" unchecked, and then subsequently check it after it has been opened, the image is not blurry and I have access to all of the video card supported functions. Has anyone else experienced this problem, and found a solution? Thanks, artmar4 (intel i5-3670, 24 gb RAM, Windows 7, 64 bit).

artmar4 wrote:
I must admit it's not intuitve to me that the image would be somewhat blurred when clicking on "fit screen" and "fill screen" (but then what do I know.)
The GPU image-interpolation for display is more sophisticated than that of the CPU, but both methods cannot avoid compromising the image quality in some way in order to reduce the scale of an image. The GPU method can produce blurry results whereas the CPU method can produce ragged results.
Both methods produce very good results when the zoom is 100% divided by a power of two. However, "Fit Screen" and "Fill Screen" won't give a nice neat zoom level like that, except on very rare occasions when an image has a particular size relative to the screen.
Here's a (hideous) contrived example of the blurriness of GPU versus the raggedness of CPU. First is the image at 100% zoom. Then the doc on the left of each screenshot is being scaled by the GPU, the doc on the right by the CPU. Click the images to view without forum resampling!

Think i have a problem with my Video card help ???

Similar Messages

Maybe you are looking for