Think Vantage System Update 4.0 Missing History of Installed Updates

When I did a clean install of Win7 on a new Lenovo 160Gb HDD, I downloaded TVSU 4.0 and proceeded
to download all applicable Lenovo Win 7 updates.  I also downloaded all the necessary Microsoft updates
as well.
When I go to review my installation history of installed updates from Lenovo the page is blank and shows none of the updates I have installed. 
I redownloaded TVSU 4.0 and did a repair.  Still no installation history.
Another puzzler is that the red up and down arrows in a circle Lenovo system  update logo shortcut on my desktop  has been replaced with a generic Windows shortcut logo which is still labeled system update.
Any suggestions?
Thanks,
Altoid666
T530,Core i7-3820QM,16GB Ram, Intel 530 SSD 240GB, Blutooth 4.0,Ultimate-N 6300, 15.6 FHD, Nvidia NVS 5400M., All software current.,
Windows 7 Ultimate x64 , SP1. Office 2013 Professional

What happens with me is that I get the history of what's installed/downloads, only nothing shows on the Start Menu in Win 7. No ThinkVantage group, nothing.
Ideas?
Presently with an X201 and a T500/T410 combo
I've owned everything from a 701c up to present which equal a ton of ThinkPads

Similar Messages

  • Think vantage system update problem

    I just installed the think vantage toolbox and the think vantage system update on my Z560, Windows 7 laptop......  but when i run the system update for lenovo updates, it gets to only  16% complete and  then tells me "there are no applicable packages found for your system".   My computer was purchased in January 2011 and I know from looking at the driver download page that there are all kinds of updates for my machine released in February 2011 which I  haven't downloaded yet.  So what should I do to get the system update working properly?????  I had thought that the system update tool was a godsend, because I am computer shy and somewhat afraid of completely messing up my machine by doing the wrong thing. So, I'd really like to get it working.
    And, if I can't do that, does it hurt to download any potentially relevant driver update (those noted as being for Z560s, that is)????   Thanks for any advice.
    Solved!
    Go to Solution.

    isn't the z560 a ideapad in that case thinkvantage software won't work
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    I started my update for ios 5.1for iPhone 4s and cancelled it have way through now it says it's downloaded but really it's not the update is still there and when I try to update it it says unable to install update : an error occurred installing iOS 5.1  ?

    See Here... Unable to Update or Restore...
    http://support.apple.com/kb/HT1808

  • Servers where patches will not install automatically or manually, Live updates are broken and when checking installed updates shows "NO UPDATES ARE INSTALLED ON THIS COMPUTER" SFC \SCANNOW will not run

    Hello, (Bit of a long one but please read)
    We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all built from the same standard
    image we use on hundreds of other computers, they have also been in production for different amounts of time and we started to see this behavior at different times with them: (Its odd they are all in the same site where there are also several other servers
    that are not effected, there must be a link ? )
    These servers are all missing several patches when checking our internal tool that reports from IBM endpoint management that we use to deliver patches (they are not all missing the exact same patches some ore or less than other), although
    SCCM (we used SCCM to deliver patches until around 6 months ago) and IBM EM are both running (some ptches hark back to the SCCM Delievry days) they are not patching and when attempting to patch manually by downloading the exact patch coresponding to the fixlet
    ID and the KB , the stanbdalone installer starts and after some time you receive an error message “The update is not applicable to yoru computer”. Windows update returns error 80070006 for all of the servers.
    it is worth noting that other applications and products also using the .MSU extension will insatll so it is not a problem with the installer service.
    The above led me to think a corrupt patch may have stopped the sequence of patching so I then looked in “Programs and Features” => “Installed updates” and this is blank for all of them returening the message:
    “NO UPDATES ARE INSTALLED ON THIS COMPUTER”.  (this I believe is a part of the fundamental issues and resolving this may resolve the patching)
    Another issue is that if you run  “SFC /SCANNOW” It starts the scan and then returns: “Windows Resource Protection could not perform the requested operation” (Also in safe mode and both from an elevated CMD and WMI is started as a service)
    The all three are probably related so I think fixing the “SFC and NO UPDATES SHOWN” issues will resolve the first.
    The things I have tried so far are:
    Running : wmic qfe list full /format:htable > c:\updates.htm             Should produce a list of updates but instead returns :  No Instance(s) Available (this is not hopeful)
    Fix: Ran the “SYSTEM UPDATE REDINESS TOOL” from  http://support.microsoft.com/kb/947821
    Result : Update Ran successfully but NO CHANGE
    Fix: Ran the automated and manual fix “RESET WINDOWS UPDATE COMPONENTS” here :
    http://support.microsoft.com/kb/971058/en then undated windows update agent.
    Result : All ran successfully and NO CHANGE
    Fix: Ran MBSA
    Result : Runs successfully and then stays at “Done downloading security update information” (Log gives no obvious information)
    Fix: Renamed the software distribution folder/restarted services (Various variations of this fix online, tried a few)
    Result: Runs as described in article with new Software distribution folder being created,
    NO CHANGE
    Fix: Create/Correct the  reg key for windows trusted installer located here HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version (several articles relating to this and the above issues)
    Result: the existing key was correct as should be from internal system information gathered , required in article.
    Fix: Ran the “Windows update trouble-shooter”
    as here :
    http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
    Result:  It detected and fixed error’s but still no change.
    The WMI Repository checks out on them all for both of the methods I know to verify “Get-wmiobject –list |measure” and ensure count is over 900 and also “C:\>winmgmt /verifyrepository” and the repository came back as “WMI Repository is consistent”. I guess
    this is not hard evidence the WMI is OK, but these are the only methods I know.
    I have also tried removing the server from its OU , running a GP Update and then rebooting and testing but to no avail (Bit of a longshot but tried to link the distinction between the three servers and the OU GP is one of them)
    I have tried a few other articles registering .Dll’s etc , but I did not take a note of links as I was at the start of this and didn’t expect it to go so long so please reply with anything you see not above im happy to try again.
    I have thought about removing SP1 and reinstalling it but this will require a major downtime and only possible if the backup files of SP1 have not been removed.
    Any help is apreciated !

    Hi,
    Please try to rebuil the WMI repository.
    For detailed information, please refer to the blog below,
    http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
    If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Installed Photoshop 12 on a new PC and when I tried to run updates it gave error message & wouldnt install updates?

    I am installing Photoshop 12 on a new Windows 7 based PC.  After installation, I tried to run the updates.  They gave an error message and would not install.  What to do next?

    update manually,
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • Cluster aware updating hotfix plugin succeeded with 0 installed updates

    we try to apply Hot fixes to Hyper-V 2012 Nodes using CAU
    we prepared every thing for using CAU Microsoft Hot fixes plugin
    then generate update preview list successfully 
    then Apply updates for cluster the log show succeeded operation 
    but when you Run report for applied updates it shows 0 installed updates
    can anyone help why 0 updates installed
    thanks
    Ahmed

    All recommendation applied and CAU working fine for WindowsUpdatePlugin 
    the problem only with  MicrosoftHotfixesplugin
    thanks
    Ahmed

  • Software Update no longer runs or lists installed updates :-(

    On a 20" and a 24" iMac (both in different locations and with Leopard installed from different discs) Software Update has not run (set to check daily and download updates in the background) since February.
    Also on both Macs SU does not list installed updates.
    On the 20" iMac I also got an error about no such files or directories when trying to download the new Airport patch. But Airport Utility was able to download and apply it just fine.
    SU is very badly broken and as is usual the AppleCare techs have no idea how buggy Leopard is in the real world.
    Regards,
    Jamie Kahn Genet

    Reset Ignored Updates is on the Software Update menu i.e. just right of the  Apple Menu. 
    Again if you don't have any joy then I suggest using Pacifist and your OS X install disc to re-install just Software Update.
    As SU seems to be having issues then replacing it should be the easy answer.
    kind regards
    mrtotes

  • Database update failed for some organizations when installing Update Rollup 1 for Microsoft Dynamics CRM 2013 Service Pack 1

    Hi, 
    We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
    Does anyone know how to fix this problem? 
    09:10:41|   Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115.  Continuing with other orgs.  Exception: System.ArgumentNullException: Value cannot be null.
    Parameter name: type
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.Activator.CreateInstance(Type type)
       at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
       at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

    Hi, 
    We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
    Does anyone know how to fix this problem? 
    09:10:41|   Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115.  Continuing with other orgs.  Exception: System.ArgumentNullException: Value cannot be null.
    Parameter name: type
       at System.Activator.CreateInstance(Type type, Boolean nonPublic)
       at System.Activator.CreateInstance(Type type)
       at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
       at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
       at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

  • HT4479 Mac app Store Issue: Trying to download the app store application so we can install recently purchased software update of 10.7 but unable to do so because we don't have updated software. Need assistance in installing update that's already been purc

    Trying to downloads App store application for the sole pupose of downloading a purchased OS update 10.7. We cannot download the app store until we have a software update but need the software update to download the app store.

    There is no Mac App Store app that you can download. The Mac App Store is installed with the update of previous installations of Snow Leopard to version 10.6.8. v1.1.
    Does your Mac have OS X Snow Leopard installed? If not, you have to install it before you may go further.

  • Patching - How to update the console product version when installing Update Rollup 5

    Hi,
    I just completed a patch to upgrade Service Manager to Update Rollup 5. I updated the data warehouse servers and management servers.
    When looking at installed programs in Windows it shows that Service Manager has the latest version 7.5.3079.315:
    However, when I look in the About Service Manager option in the console it shows a product version of 7.5.3079.0:
    How do I update the console product version so that it shows the 7.5.3079.315 version?

    Hi,
    This behaviour is expected. Unfortunately, Microsoft does not update the About Info screen of the SCSM console. Add remove programs shows version .315, which means the console was also updated.
    Make sure to also update consoles that your users are running on their computers.
    BR,
    Dieter

  • Think Vantage Update Failure to Install

    Are you experiencing "n Packages did not install" messages from Think Vantage System Update after
    it has completed updating your system with Microsoft Vista Update Modules (KB XXXXXX)?
    This has occurred more than three times after having installed Vista SP1.  It is troubling because it seems that System Update is failing to install necessary KB updates.
    The most recent failure followed an attempt to install three Update Modules.  I checked them out and found that they were pre-SP1 hot fixes.  For example, KB 932063 was a hot fix that Microsoft issued to fix five wireless issues in the pre-SP1 environment.
    This practice by Lenovo raises two questions:
    Why is Lenovo promulgating pre-SP1 hot fixes in a post-SP1 environment without giving notice to uses that the updates are not appropriate for SP-1 machines?
    Why does Lenovo promulgate for general installation hot fixes that Microsoft recommends be installed only upon the occurrence of certain symptoms?
    After the first occurrence of this type of System Update failure I phoned technical support.  The technician told me that I had to call the pay-per-visit support line.  When I told him that this was a new practice that was instituted after the particular Think Pad (a T60) was purchased, he argued with me.
    These practices are Lenovo management issues.  They should be remedied at once.
    slcastner

    I've had the same problem with trying to install SP1. Any 'pre-sp1' hot fixes are included in SP1 anyway, so I don't know why SP1 won't install. I have also tried to update some intel drivers and they failed, and the message said to contact my system manufacturer for the appropriate update. It's a tough way to do business.
    --Jim

  • Updating consignment Purchase Order history.

    Hi Gurus,
    I understand there's a constraint in SAP where a consignment PO history will not be updated at PO history during invoice settlements with the  vendor. Is it possible to do update a consignment PO history with invoice update? ..Are there any customization solutions implemented before? Kindly assist.

    Hi,
    Please try to understand that cosignment doesn't have invoice concept. Observe in cosignment PO there is no invoice tab. A fter consumption or transfer to our own stock will do settlement periodically in MRKO. This won't be upated in PO history. There is no cofig settings to update MRKO in PO history because it is not invoice. In PO history GR and Invoice related information will get update.You can see the seettled documents in MRKO itself by selecting settled docs.  I hope this will give you clarity. Thanking you.

  • HP Pavilion Windows 7 hanging on installing updates

    Desktop totally hung trying in install update 2 of 6. I let my pc restart for new updates but after downloading updates and system restart my pc is now hung installing updates. I can not get out of this situation. After hard power off and when I press F8 all that comes up is the Startup Menu. I do not see the option to boot in Safe Mode. When I exit the Startup Menu Windows resumes but then seconds later the screen shows installing update 2 of 6 appears again. It seems to be accessing the hard drive as the light continues to flash. After a few minutes the light stops flashing except for occasionally. Anyone have any ideas? Thanks!

    Update. Checked my October this morning and it was hanging in Shutdown mode. I waited a couple hours and decided to force a shutdown/power off. It seems to have passed where it had been hanging for 2 days and Windows started successfully. Running a full system virus scan now. So things appear to be improving.

  • Installing update 118833-23 Failed

    Hi All!
    118833-23 has a problem on Solaris 10 with zones:
    # init 6
    # svc.startd: The system is coming down.  Please wait.
    svc.startd: 80 system services are now being stopped.
    Installing update 118833-23 Failed
    > less disallowed_patch_list_report
    Patching zone zproxy
    Booting non-global zone zproxy for patching...
    Adding patches...
    Executing prePatch script...
    Checking installed patches...
    Executing prepatch script...
    Verifying sufficient filesystem capacity (dry run method)...
    Installing patch packages...
    Pkgadd failed. See /var/tmp/118833-23.log.5413 for details
    Removing partially installed patch
    Validating patches...
    Loading patches installed on the system...
    Done!
    > tail /export/zones/zproxy/root/var/tmp/118833-23.log.5413
    Installation of <SUNWnfsckr> was successful.
    This appears to be an attempt to install the same architecture and
    version of a package which is already installed.  This installation
    will attempt to overwrite this package.
    pkgadd: ERROR: unable to create unique temporary file </etc/fs/nfs/mount5Ia4ty>: (30) Read-only file system
    Installation of <SUNWnfscr> partially failed.
    > cat /etc/release
                           Solaris 10 1/06 s10s_u1wos_19a SPARC
               Copyright 2005 Sun Microsystems, Inc.  All Rights Reserved.
                            Use is subject to license terms.
                               Assembled 07 December 2005

    This patch has been obsoleted by 118833-24. Can you
    install the later revision and let us know if you see
    the same problems?turning back to the problem of 118833+zones: if I try to install the -24 or -23 in milestone single-user I have the old problem: pkgadd: ERROR: unable to create unique temporary file </etc/fs/nfs/mount5Ia4ty>: (30) Read-only file system in the zones. I assume, the patchadd starts the zones and not waits until the zone is online. On the old slow hardware it can bring this error message and, at least, the /etc/fs/nfs/mount will not be updated.
    The workaround is not to install this patch automatically, start zones with boot -s, wait, until they are ready and then apply this patch. It's probably not very bad idea to start all active zones first and then apply patches. It spares time on slow and not very slow systems.
    Tested on
    # prtdiag
    System Configuration:  Sun Microsystems  sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz)
    System clock frequency: 111 MHz
    Memory size: 512 Megabytes
    ========================= CPUs =========================
                        Run   Ecache   CPU    CPU
    Brd  CPU   Module   MHz     MB    Impl.   Mask
    0     0     0      333     2.0   12       1.3
    ========================= IO Cards =========================
         Bus#  Freq
    Brd  Type  MHz   Slot  Name                              Model
    0   PCI-1  33     1   ebus
    0   PCI-1  33     1   network-SUNW,hme
    0   PCI-1  33     2   SUNW,m64B                         ATY,GT-C
    0   PCI-1  33     3   ide-pci1095,646
    0   PCI-2  33     1   scsi-glm                          Symbios,53C875
    0   PCI-2  33     1   scsi-glm                          Symbios,53C875
    0   PCI-2  33     2   pci-pci8086,b154
    No failures found in System
    ===========================
    # cat /etc/release
                           Solaris 10 1/06 s10s_u1wos_19a SPARC
               Copyright 2005 Sun Microsystems, Inc.  All Rights Reserved.
                            Use is subject to license terms.
                               Assembled 07 December 2005
    # uname -a
    SunOS app02 5.10 Generic_118833-24 sun4u sparc SUNW,Ultra-5_10
    # smpatch analyze
    119252-13 SunOS 5.10: System Administration Applications Patch
    124171-01 SunOS 5.10: flash issue with SUNWscn-base due to broken package
    124327-01 SunOS 5.10: libpcp patch
    123252-01 SunOS 5.10: platform/SUNW,Netra-T2000 patch
    119280-07 CDE 1.6: Runtime library patch for Solaris 10Message was edited by:
    v0vik
    I tested the installation of 118833-24 with smpatch update; init 6 too.

  • How to manually install updates?

    I use Sun Update Manager and there are 110 updates available for now. Among the 110 updates, 37 updates that require manual installation are still on the available updates list after I click the 'Install Updates' button and restart the system. How do I install these 37 updates?

    There are a couple of things that could be causing this.
    Without more info, its hard to know what.
    There are some patches that genuinely require manual handling, but they're not common so 30 odd seems like too many.
    Your probably blocked on one manual patch, thats a prereq for the rest.
    What kernel level are you currently on. If 118833-36 show up in the list of patches to install then thats the one thats causing the problems. (Or 118855 in the x86 world).
    Try "smpatch add -i 118833-36"
    followed by a reboot. Sun recommends doing this in single user mode. I don't normally bother unless the machine is heavily used and/or critically important.

Maybe you are looking for

  • DataFlavors in java.awt.datatransfer

    Hello I'm in the process of developing an application that manages the clipboard . The program runs in the "SystemTray" using the java Toolkit , on the user's request the application takes the content of the clipboard and sends it to other computers

  • Changes in object spesific z attributes are not saved

    Hello experts, I'm trying to make a change in attributes I made in the object btserviceh: zz_created_by TYPE crmt_created_by zz_changed_by TYPE  crmt_changed_by zz_creation_time TYPE comt_created_at_usr zz_change_time TYPE comt_changed_at_usr The cha

  • Music skips and pauses during work out

    Ciao a tutti, I like to use my iPhone when I'm working, stapping it to my arm with an XtremMac SportWrap, and listening to my playlists. I'm running for about 40 minutes and usually about halfway through my workout, or towards the end, the music star

  • Last 36 months in Dashboard Prompt

    Hi Experts, Hi have requirement to show last 36 months in dashboard prompt. Please help me to achieve this. Thanks in advance

  • PSE8 Organizer won't display on monitor

    I have a really strange problem.  I have a new laptop running Windows 7.  I have a mouse, keyboard and monitor (among other things) attached to it via a port replicator so I can use the laptop as a desktop (whatever happened to good old docking stati