Thinkcentre A52 8327 Update Bios problem

Hi all
I have ThinkCentre A52 8327-75G.
My problem is. When i flash (update) BIOS from Windows Xp, first all is okay, but when start work i see in "Task Manager" it show only one thread (before i flash (update) BIOS from Windows it show me 2 threads)
Now have and error mesage "Invalid Machine type and Serial Number - Update Bios to correct this"
I update Bios because motherboard LAN not show in Device Manager and in BIOS show at MACAddres Invalid.
My CPU: Intel Pentium D 820 2.8 2M cache (duall core)
RAM: 2 x 1gb 667 and one 256 mb
My Question is: Is there have BIOS Repair or Recovery CD that can i use to fix this
I really need this pc to work .. HELP Pleace
Always seem to focusing only on the negative things, and now guess I can get out of here and say that done well as such. My friends have described me, so that it looked down from the other perspective. This is inspiring. This is my vocation, this is my job. This is what I love to do and will continue to do better. And with love every single day because these people counting on me and they love me for what I do.
Best regards *Lasoto - M.W.*
Solved!
Go to Solution.

okay i burn cd with Nero Boot working but result is same ... any other ideas ? 
BTW >>>...<<<<
The Standart PC Have 512 mb ram, Pentium 4 but i never change this cpu i get it like i have it now.
Before i update bios from os cpu has 2 core and system working well ...
My question is bios can set how much cpu to use OS ?
Sec. is there have a program that can change "ROM" file to my way ?
Here have something wrong with that bios, let lenovo dev revers it and see it.
I will buy IDA and revers it like my way. i don't see other way..
Always seem to focusing only on the negative things, and now guess I can get out of here and say that done well as such. My friends have described me, so that it looked down from the other perspective. This is inspiring. This is my vocation, this is my job. This is what I love to do and will continue to do better. And with love every single day because these people counting on me and they love me for what I do.
Best regards *Lasoto - M.W.*

Similar Messages

  • Updating bios problems k7n2-L bio= 3.0

    I have a k7n2-L board, bios 3.0
    how do i find bios write protection? wehre is it i kant find it - im having problems updating bios.
    thx
    stun

    With my older kt266a chipset and a 1700+ cpu, I had the regular cpu temp higher than case temp.
    But then I applied a patch that enabled the use of the CPU HALT command.  This effectively stopped the cpu completely when it wasn't doing anything.  The temps at 100% load did NOT change, but the temps at idle were dramastically different.
    Considering the effectiveness of todays heat sinks, it is not unbelievable for a cpu temp to be lower than a case temp, as long as the cpu temp is above ambient.  In my case, I have 2 7200 rpm hard drives, which have 2 80mm fans blowing on them.  There is also an nvidia gf4 4200 which puts off a good deal of heat.  If the mobo temp sensor is located in such an area that it picks up the heat from those items, and the cpu get's airflow that has not been heated by those items, then I can see how there would be a large difference in temperature from mobo to cpu at idle.
    at load, the cpu should be above mobo temps if you use a regular case and air cooling method.

  • Thinkpad t43p update bios, problem

    Hi forum,
    i've a T43p model 2668, Windows 7 Ult., EC 1.06, BIOS 1.27
    How to update BIOS to 1.29 (Windows 7)
    Solved!
    Go to Solution.

    I would be afraid to run the BIOS update for an older system from within windows 7. Maybe someone wi6th direct experience will post, but if I were doing it, I would do it from a bootable floppy.
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-59097

  • P965 Neo-F Updated BIOS Problem

    Hi,
    finally had chance to update my bios today (v1.6), worked fine, BUT;-
    when windows loads, the windows xp logo screen (with the blue horizontal thingy going left to right), hangs there for at least 15 seconds then carries on as normal? now i tried going back to v1.5 & v1.6F and the same problem on each, didnt happen before i updated.
    Has anyone else had the same issues and/or does anyone know how to solve this?
    Thankz you very much

    Quote from: pontyjon on 29-January-07, 21:45:01
    na if i do decide to update the bios, i think ill do it in dos. did try that 1st time round but couldnt fit both the flash utility and bios rom files on to floppy.
    I didn't have any problems with WinFlash in the past ... X years.
    WinFlash Russian Roulette become WinFlash the Great if you disable all the resident programs before flashing the BIOS.
    I mean: AntiVirus, AntiSpam, FireWall, the NVIDIA helper (if any), etc
    p.s.
    If you don't like WinFlash, why don't you use a bootable USB Flash Drive ?

  • MSI GT60 2PC Dominator BIOS Update RAID0 problem

    HI THERE , this is my first topic in msi forum and I hope you can solve my problem 
    I have the MSI GT60 2PC Dominator, my laptop came with FreeDOS with E16F4IMS.50Y non raid0 bios version (installed only one msata 128Gb), One day i upgraded my Laptop, I installed two more msata 128Gb. Now 384Gb Raid0 hard disk and i installed windows 8.1 64bit (Working UEFI mode).
    I flashed the bios yesterday to the E16F4IMS.515 which is the latest one but it seems that it doesn't support the RAID0, i didn't care about that, i installed windows 8 but everyday i'm getting several problems with GPU and that blue screen and its really annoying.
    So i tried to upgrade E16F4IMS.715 , But Flash_BIOS_by_UEFI_BIOS_Setup_Utility_e n.pdf this method not supported my laptop (Automatically restart after select bios file.), And i tried too EFI Shell mode bios update. But there is no Afuefix64.edi and FLASH.NSH files in New bios zip file. It has only E16F4IMS.715 file.
    Now my question is How can i flash the bios to E16F4IMS.715?
    Sorry for my bad English and i thanks for your corporation.

    Quote from: Nichrome on 04-November-14, 20:09:17
    Hello and welcome to the forum! 
    Sadly there is only 1 person that is able to help you with flashing procedure, but also directing you to the right BIOS file, and it's Svet. You might have to wait a little bit, as you may already know, it's users to users forum, and we come up when we can and if we actually want to.
    What way did you flash the BIOS?
    I used EFI BIOS utility method. I chose BIOS file and when i click OK button ,  it starts normally after 20-30sec. it doesn't update bios. How ever it works on E16F4IMS.515 (Non-RAID) bios updated successfully. But not working E16F4IMS.715 (RAID0) bios.

  • Bios update e430 problem

    Hi i have e430 , when i update bios win restarted and show black screen what do I do?

    Thanks for the good reply! Upon reflection I kinda thinking if the Phoenix WinPhlash will not even display itself properly, chances of it working properly are pretty slim. the only reason I was looking to update BIOS was for,
      (New) Update for the 3000 N100 (Windows XP Preload Models) BIOS Ver. 2.05 (61ET36WW) for the following updates.
    ***** IMPORTANT *****
    This BIOS contains a critical processor microcode update to improve system reliability. Lenovo highly
     recommends that you apply this BIOS update.
    I've always experienced "intermittant / random" hangs on boot and hangs on shutdown the entire time I've owned my laptop, not real bad, but frequent enough to make one say "huh, what up with dat". HOWEVER not one to jump out of a running airplane, and ever disobey the Cardinal Rule of "if it ain't broke, don't fix it" I thinking just let it ride may be a wise man's move. Any wise persons out there agree or disagree?
    Thanks much!
    Rick

  • GT-70 2OD Touchpad Problem (disabling button) after updating BIOS and EC

    Hi All,
    I was solving issues with random BSOD's (https://forum-en.msi.com/index.php?topic=176615.0), but now I got the button that Disables the Touchpad malfunctioning.
    I just updated BIOS and EC to 2014-01-17 Versions from MSI website.
    The button is not disabling the touchpad and also the LED is not working (well, it used to turn on when the touchpad was disabled), however the "touchpad enabled" picture is showing on the screen everytime the button is pushed.
    It's not a major thing, but you know how perfectionists are .... Any idea how to solve this? I'm just going to try updating the touchpad driver with latest from MSI website and let you know the result
    Thanks in advance,
    PS: Nice community. I just joined this forum and I received a lot of help already!!!!

    Quote from: darkhawk on 05-February-14, 01:00:21
    Did you perform the EC Reset procedure outlined on the website?
    Just to reiterate it:
    1. Turn off the laptop.
    2. Remove the Battery.
    3. Remove the AC adapter.
    4. Let the laptop sit there for 20 minutes.
    5. Install the Battery.
    6. Install the AC adapter.
    7. Turn on the laptop.
    This might help fix the issue.
    Yep, I followed step by step to update the EC.
    I just removed original synaptic driver for the touchpad and Installed latest from MSI website. The button doesn't work as before (I was able enable/disable at will), now its behavior is as follows (and I think it was made intelligently):
    You can't disable the touchpad if no other pointing device is present
    When another pointing device is present, the touchpad disables itself and the button LED is ON (as before). You can't enable the touchpad (before I was able to enable it) if another pointing device is present.
    For me, it's OK. BTW... had been about 22 hours without BSOD...
    Thank you guys!!!
    PS: I just realized that I re-connected my PS3 controller via USB (in the very same USB port that I use to connect it) and the laptop REINSTALLED drivers for it...

  • Problem updating bios

    Here is a question related for bios.  I have a ms6534 mother board which current has 1.1 version of bios on it.  In order for my prosscessor to work i need to put on 1.4 verison of bios on it.  I manage to get into the program to update bios and save the old bios.  But when a go load the new version into it, it start to over write bios, it comes up with an error that is "Flash ROM erasing error".  I have no clue what this means.  came someone because ecplain what i should do to update the bios.  Thank you!

    you sure award bios...
    Award and AMI both are different bios and are using a different flash utility...
    you are luck that your board still 'alive'...
    you confirm the board model number is ms6534...
    if yes, think you better contact your msi local distributor for help...

  • K8N Neo Series - update bios 1.4 to 2.1 - SATA problem

    - i have K8N Neo-FSR (7030) with two SATA ports.
    - i update bios from ver 1.4 to 2.1
    - after restart, my bios show FOUR SATA ports, and on welcome screen is write "K8N Neo Platinum"
    - difrent betwen K8N Neo-FSR and K8N Neo Platinum is in additive two SATA Ports
    - is this NORMAL???
    - how i can fix it?
    Thanks for solution

    Quote from: syar2003 on 29-April-06, 18:53:20
    BE careful in your statement Stick .
    Quite a few with K8N Neo Platinum (MS-7030) has gotten their board ruined (no-post) over the last weeks
    cause by LiveUpdate giving out a wrong MS-7030 bios .
    There is three 7030 which use different bioses and is identified on the bios extension name .
    MS-7030 versions 1.0 to 2.22 is for the 1'st generation (Neo Platinum and FSR)
    The other two have extension 7030.5xx and 7030.7xx and is for Neo-V and Neo V 2.0 .
    Think it's a really bad call from MSI to use the same MS number for seperate boards that completely
    rely on "their own" bios ,and at the same time autoprovide their bios files through the liveupdate server .
    do all of those BIOSes have the same BIOS string ID?

  • Please help me with Bios problem

    I have laptop toshiba Satellite L735-S9311D.
    I used windows service station and update bios to the latest version  during installion I forgot to unplug my external HDD.
    Error message appeared , Now no display on the screen.
    So, Please I need help to solve my problem.

    Please..............

  • Can not update BIOS R830-14U

    Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
    after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
    http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
    The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
    Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
    Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
    What else can I do to fix this problem?

    The problem is solved in complete restoration of the image of the disaster

  • Video signaling problem caused by 1.9, 2.0 BIOS (pointing out a BIOS problem)

    Hi, i have a problem with the video signal. At random times when i boot up my computer, the computer would power up but there is no signal to the monitor. there is no hdd activity (via the hdd led) and nothing seems to be happening just that the fans are whirring. i have to unplug the computer then plug it again then turn it up again which sometimes repeats the problem. This is very irritating! So i did a little bit of troubleshooting:
    1. I changed video cards. I used a SAPPHIRE ati radeon 9600XT fireblade and a LEADTEK GF4 ti4200. Both cards were causing the same problem and when i used both cards to another computer, there is no problem. = NOT A video card problem
    2. used differnt kinds of drivers Cat 3.10, 4.10, 4.20 (omega and official) does not seem to do anything (which also i believe the drivers are OS dependent and its the bios of the vid card that starts up the vid card)
    3. upgraded from 1.9 to 2.0 BIOS. still the same problem
    4. reverted from 2.0 to 1.7 BIOS. the problem ended.
    BTW, the board is 865PE-Neo2 - S. on a Intel 2.6Ghz C, 512MB TwinMos ram with m-tec chips, 80gb hdd, enermax 300w psu
    so ive' solved the problem, and i just wanted to point out that there is a problem with 1.9, 2.0 BIOS. (havnt tried the 1.8 tho)

    Wish I had seen this thread 2 weeks ago, but you did save me from buying a new graphics card.  That was the last step (before chucking this mobo completely) in my attempts to fix the same problem.  It didn't bother me too much, except I also couldn't get any DVD player (tried 3) to work.  Would boot sometimes and at others gave a blue screen video error.
    Flashing to bios 1.7 was the only thing that fixed it.  Tried different memory, updating software, various combinations of drives, etc.  For the record I tried bios 1.8, 1.9, 2.0, and 2.1.  Not sure what about those updates causes problems but there definitely is something wrong.
    Thanks.

  • Can't update BIOS?

    Am I to understand that I simply cannot update my BIOS, on account of that I'm using WinXP with NTFS and don't know anyone with 98/ME? I really hope I'm missing something here, because that sucks. I shouldn't have to rely on "friends" with outdated operating systems in order to keep my BIOS up to date.  
    I also don't usually keep a floppy drive in my computer. I had to install one specifically to flash my BIOS. Can't this be automated by Windows yet? Sheesh. A little help here?

    Do not flash your bios from a floppy diskette. it will fail.  If you will
    do a search of people who have done this they all have problems flashing from
    a 3 1/2 disk.  Flash from hard drive or cd rom as stated in flash procedures for
    you mobo.  Finally if there really is not a problem with your bios and hardware their is not good reason to update bios.  If its not broke don't fix it!!!!!!!!
    865PE Neo2-FIS2R Bios 1.3
    P4 2.80C & Zalman CNPS7000A- ALCU
    2 Crucial 256MB DDR PC3200 (1 Channel A & 1 Channel B)
    ATI ALL-IN-WONDER® RADEON™ 7500 64MB
    Maxtor 120 GIG DiamondMax Plus 8MB SATA
    MSI CD-R/RW 52-M
    MSI DVD DR4
    Antec Sonata 380 PSU 2 120mm fans
    Windows XP with current SP and updates
    H T enabled
    USR 56K internal modem
    Logitech Cordless Access Duo\ keyboard & mouse
    ViewSonic VX900 19" real cool

  • Is it Neccessary to update BIOS?

    I am inclined to always update everything (drivers, BIOS, etc) every chance I get, thinking there are fixes to various problems. However, I have read that it is best not to update BIOS if the system is working well.  In my case, although my computer is working with a BIOS dated April this year, I am never satisfied with my system speed and other issues.
    The new BIOS was just released Nov 1. I am on an 1155 platform Sandy Bridge, ASUS brand, with i7 procesor running Windows 7. I have several hard drives, RAID arrays and other components internal and external.

    Alex, I'm agreement with what others have said here but would like to add that you could also do some google searches on this particular new BIOS version to uncover any issues that people may be having with it.  Sometimes BIOS updates are not that well tested by the motherboard company and they have to be quickly followed up by another update to correct bugs.  Being that this new BIOS is a month old already gives some assurance but you should probably do some searches nonetheless.

  • Not able to update bios.

    My product number is showing up as "Product Number: PPPPPPP-CCC#MMMMMMMM" so when I try to update bios it states that it is not applicable. HP auto detect is also not able to identify my PC. I have a  HP A6750F Vista 64. Any help on how to fix this or atleast be able to update bios? Thanks for any help.

    I had exactly the same problem with the new BIOS flash and couldn't seem to install it either. A 'Google' search threw up these forums and I noticed the issue seemed to be fairly recent.
    So I did what the others suggested - downloaded the BIOS update 'exe' file and restarted my S10-3c and it failed to run!
    Spoiler (Highlight to read)
     Then I downloaded the same file and (erroneously I must add) I saved into the same folder as the earlier BIOS update file, which had similar problems.
    I didn't restart, just double clicked on the 'exe' file and voila! It WORKS!!!!
    The solution is to download the earlier "amifldrv32.sys" file, and follow the same instructions. The instructions are:
    1) Download the "amifldrv32.sys" file (a quick Google search will help you locate the file) 
    2) Save the file into a specially named folder (ex. BIOS Flash)
    3) Download the BIOS update 'exe' file from the lenovo site and save it in the same folder as the "amifldrv32.sys" file. 
    4) Follow the appropriate instructions on the download site to prep your machine for a BIOS flash
    5) Double click the 'exe' file and wait a moment or two - you'll see the utility pop up and begin its work
    6) On the restart, press the F2 key and you'll be able to see the new BIOS version / or restart and log in as normal and run the "msinfo32" command in the 'Run' box and check the system summary/BIOS version
    Oh! Don't forget to thank me
    Mod/Admin - if others respond that this solved the problem can we mark it as a 'Solution'?
    And how can the Lenovo folks know that the "amifldrv32.sys" is a problem they need to rectify for future updates?
    And all - compliments of the season, a happy new year and all that
    Lenovo S10-3c; Win7 and potential OpenSuSE 12.1 Live GNOME user

Maybe you are looking for