Thinkcentre-edge-72 PCI communication PCI simple

thinkcentre-edge-72 PCI communication PCI simple where find this driver?
Solved!
Go to Solution.

Good day and welcome to the community.
I believe that device is supported via the Intel AMT and Management Engine Interface packages, which can be found on your support site: http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/thinkcentre-edge-desktops/thinkcen... in the Chipset section.
The AMT / MEI feature set is generally only useful for machines in an enterprise environment facilitating out-of-band remote management.
Hope this helps.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

Missing pci simple communications controller

missing pci simple communications controller for windows 8.1.

Hi:
You need this driver. Manually install it if the auto install doesn't work.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3459243&swItemId=vc_78668_2&swEnvOid=4053

PCI Simple Communications Controller Driver for Win7 (64-bit)

Hello,
I am reinstalling everything on my EB 8470p laptop (Windows 7/64-bit) and I am missing the following drivers,
1) PCI Simple Communications Controller:
PCI\VEN_8086&DEV_1E3A&SUBSYS_179B103C&REV_04
PCI\VEN_8086&DEV_1E3A&SUBSYS_179B103C
PCI\VEN_8086&DEV_1E3A&CC_078000
PCI\VEN_8086&DEV_1E3A&CC_0780
(2) Unknown Device:
ACPI\HPQ6000
*HPQ6000
Your help is greatly appreciated!

Hi,
Please try:
1. http://ftp.hp.com/pub/softpaq/sp46501-47000/sp46507.exe
2. http://ftp.hp.com/pub/softpaq/sp57001-57500/sp57318.exe
Hope they help.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

64 Bit Vista Driver for PCI Simple Communications Controller

I installed vista 64 and have everything working well, I think. Only problem is this driver. I assume it is the modem. But I cannot find a 64 bit driver and doing the search online doesn't work. Any ideas?
BTW it is a k100 57061330 machine
Message Edited by Kevin on 05-16-2008 08:12 AM
Kevin
New Lenovo user.

I upgraded to 64 bit and have three driver-less devices:
pci data acquisition and singal processing controller
pci simple communications controller
sm bus controller
other than that it's working quite well.
Lenovo 3000 K100, Core2Quad 2.4GHz, 4GB, 1TB, 512M ATI, Vista 64Bit SP1, 5.2 Windows Exerience Index

PCI Simple Communications Controller not working

PCI Simple Communications Controller not working on hp pavilliong6-1003tx

Hi
Download, save & install --
Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94322-2&cc=in&dlc=en&lc=en&...
Restart system after installation.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

PCI Simple communications controller driver suitable for Windows 7 x64

Hi,
I'm looking for a PCI Simple communications controller driver suitable on Windows 7 x64.
Does this have anything to do with Bluetooth? Because the Bluetooth is not working 100%, Nokia Suite does not recognize the Bluetooth device on my laptop.
The Bluetooth symbol is in the taskbar, but only when i use "fn"+f12(wireless com.) after startup
I have a HP envy 17 j009ed.
Kid regards,
NickdB

NickdB
Identical system, you find the drivers bios etc. here
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Windows-7-64bits-drivers-for-En...
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Lenovo 3000 K need PCI Simple Communications Contr. Driver update for Windows 7

PCI simple communications controller on my 3000 K series needs a driver update for the upgrade from Vista to Windows 7. I have a 64 bit system. I had no errors during my install,and Windows 7 has been working well. What can I do???
Solved!
Go to Solution.

hi ladyr1der,
Welcome to Lenovo Community Forums!
Please try installing this driver,
Intel Management Engine Interface
Restart the system after installation and check.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Unknown PCI Simple Communications Controller HP Elite 800 G1 win 7 x64

Hello, I need driver for the following device. PCI Simple Communications Controller PCI\VEN_8086&DEV_8C3A&SUBSYS_18E4103C&REV_04
PCI\VEN_8086&DEV_8C3A&SUBSYS_18E4103C
PCI\VEN_8086&DEV_8C3A&CC_078000
PCI\VEN_8086&DEV_8C3A&CC_0780 Please Support! thank youchristian

Hi, Please try: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63889.exe Regards.

Unknown PCI simple communications controller in B570e?

Hi. I have an unknown PCI simple communications controller on my Lenovo B570e. All other drivers are installed but this. Help me! coz i have an OCD to install all drivers.

Figured it out. Intel Management Engine Interface was not installed.

PCI Simple Communications Controller

Dear friends,
i'm using compaq Notebook 15-s008TU and product no. is J8C07PA#ACJ
i need driver software of PCI Simple Communications Controller for window 7 professional 32 bit.
Sathasivam

This driver should work: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134096-1&cc=us&dlc=en&lc=en...

After Upgrade (8.6.1), computer wants PCI Simple Communication Controller

After an 8.5.1 > 8.6.1 upgrade, the computer wants to install a "PCI Simple Communication Controller", but can't find anything to install. The PCI card (6221) and all ancillary stuff seem to works fine.
This issue has shown up a few times on the forum, but the posts are old. Has there been an official bit of advice published about this?
thanks
Richard

Hi Broken Arrow,
The PCI Simple Communications Controller is a generic name given by Windows to PCI boards installed in a PC when the drivers for the device are not installed. Try following the steps below to determine what this device might be:
From Device Manager, find the PCI Simple Communications Controller entry. Right-click on it and select Properties
Go to the Details tab. You should have an entry that looks something like the following: PCI\VEN_1093&DEV_70B8&SUBSYS_00000000&REV_00\4&5855BE9&0&10F0
VEN means vendor, and DEV means device. In my case, I have a VEN of 1093 and a DEV of 70B8
Once you have these two numbers, you can look up the device on www.pcidatabase.com
In my case, I receive the following result since my device is a Multifunction DAQ from National Instruments:
I suspect your device may be something else, such as an Ethernet Controller or a PCI modem. If the product is indeed National Instruments hardware and you need any help finding the right drivers don't hesitate to post back. If it is another device and you need help finding the right driver I would contact the vendor for assistance.
-John
Message Edited by John P on 04-16-2009 01:00 PM
John Passiak
Attachments:
pcidatabase.PNG ‏7 KB

Pci simple communication driver

hp nc 6220 need pci simple communication driver.
this is the actual wording against my one.
PCI\VEN_104C&DEV_8035&SUBSYS_0944103C&REV_00
PCI\VEN_104C&DEV_8035&SUBSYS_0944103C
PCI\VEN_104C&DEV_8035CC078000
PCI\VEN_104C&DEV_8035CC0870
Thats all the wording.
Can you help please. I am not very computer savvy but will try anything.
Thanks

Hi,
Download and install the driver on the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows XP, PCI simple communications controller, 3000 K100

I am trying to install Windows XP on my 3000 K100. So far I have been sucessfull with everything except a "PCI simple communications controller". I suspect it is an Intel ME, but have not found a driver that works. Any solutions from anybody?
Solved!
Go to Solution.

CarlRod am currently trying to install win xps2 on my lenovo 3000 k100 sys but each time i try booting it from the disc the blue screen of death come up and basically am stuck so if u can help me with it will be appreciated. thanks in advance

Windows 7 driver for PCI Simple Controller

I installed the Lenovo Windows 7 Professional upgrade on my R400 (7443-CTO) from Windows XP Professional. The ThinkVantage tools repeatedly shows I need a driver for the "PCI Simple Controller". I have been unable to find that driver on the Lenovo support site. Any assistance to help resolve this issue would be appreciated.
Solved!
Go to Solution.

To create shortcuts or folders under the startmenu in Win7 you can rightclick "All Programs" under the startmenu. Then you can choose "Open" or "Open all users". If you choose "Open" you will be able to change the startmenu for the current user account only and when you select "Open all users" you can change the startmenu for all user accounts on the computer. The startmenu in Windows is basically just folders and shortcuts stored in a folder on your computer. The startmenu for all users are stored under "C:\ProgramData\Microsoft\Windows\Start Menu" and for the current user under "C:\Users\<useraccount>\AppData\Roaming\Microsoft\Windows\Start Menu"
So let's say you want the "Thinkvantage" folder under the Windows startmenu where it should normally be after installing Lenovo toolbox and then the shortcut for Lenovo Toolbox under that folder. Then you can rightclick "All Programs" under the startmenu and select "Open all users" from the context menu. You should then see a explorer windows with the folder "Programs". If you open the "Programs" folder you will see the same contents as you see under the "startmenu -> All Programs". Since this is the area for the common startmenu for all user accounts there might be some more entries under the startmenu compared to what you see in this windows. By selecting "Open" instead of "Open all users" as explained above you should find the rest. So when you rightclicked, selected "open all users" and then doublecliked on "Programs" then you can rightclick somewhere in that window and choose "New -> Folder" from the context menu. Then you can give the folder the name "Thinkvantage". Then open the "Thinkvantage" folder and create a shortcut for Lenovo Toolbox. After you have done these steps you should find the Thinkvantage folder under "All Programs" and then the shortcut for Lenovo Toolbox under the Thinkvantage folder. This is how you can easily change the startmenu in Windows to add, remove or change entries under "All Programs".
Normally after installing Lenovo Toolbox it should be under "All Programs -> Thinkvantage" and not sure why that is not the case for you, but then you can add it manually like explained above. When i installed Lenovo Toolbox a shortcut and the Thinkvatage folder was created under "All Programs" during the installation. Also if you install the "System interface driver" and "Hotkey feature set" you can start Lenovo Toolbox by pressing the blue thinkvantage button on your computer. Unless you already installed "System Update 4.0" i would recommend to do so. System Update will find the drivers and software from Lenovo for your computer and give you a list where you can select those you want to download and install. System update will then download and install the drivers and software you selected and you don't have to download and install each one of them manually one by one. It will save you a lot of time. You can find system update for Windows 7 using the link below.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73695
User Access Control is a new feature of Windows that started with Windows Vista so therefore you won't find it in XP. Only Vista and Windows 7 got UAC.
Yes it's a bit late over here I'm sure i will enjoy the weekend and hope you will do the same.

Bricked ThinkCentre Edge?

Hi,
ThinkCentre Edge 91z, failed BIOS update, bricked. Power on results in fan spinning and no screen activity. I attempted resetting CMOS jumper, got beeps, no resolution. Attempted utilizing recovery CD to flash BIOS but the online documentation on this is pathetic. The best I can gather from it is "put CD in drive, shut down, switch jumper, reboot, wait". But I've done that and nothing happened. I've done that with the jumper in the normal position too.
Is there a way to force the machine to read from the CD on boot without having access to the BIOS startup flow? Basically I am in a critical recovery situation here and need some help.
Thanks.

Thanks -
Yeah, the HDD was already unhooked. I don't get any kind of video output when I boot. It just boots straight to a black screen. I am concerned that it is well and truly bricked here, but I was hoping that I would be able to somehow dropkick it into functionality.

Thinkcentre-edge-72 PCI communication PCI simple

Similar Messages

Maybe you are looking for