ThinkCentre M55 - Windows 7 sound problem.

I did a clean windows 7 install on my Lenovo ThinkCentre M55 8811, everything works perfect expect the fact that there is no sound whatsoever. I've tried plugging in all kinds of headsets/headphones but the computer doesn't recognize them. I looked around the internet and got told that i had to download audio drivers, but the problem is that there is none for the Lenovo ThinkCentre M55 8811 that support windows 7. Have i missed something or is there another solution? Please help.

http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/Windows-7-Audio-Drivers-M55/m-p/956811/h...
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/No-sound-after-installing-Windows-7-on-M...

Similar Messages

  • How to fix windows 7 sound problem

    Hello, I've been searching all over the internet for a solution on how to fix a windows 7 sound problem. I'm running it on bootcamp ,but There's absolutely no sound to it. Is there anyone that can please help me?

    Hi;I followed your instructions but still it is the same!
    Regards
          From: Pat Willener <[email protected]>
    To: Said Ahghari <[email protected]>
    Sent: Saturday, 10 January 2015, 3:58
    Subject:  How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
    How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
    created by Pat Willener in Adobe Reader - View the full discussionEven more strange!  The only thing I can think of is a complete uninstall/reinstall. Download, unzip, and run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7082910#7082910 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7082910#7082910 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
    Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • ThinkCentre M55 - no Windows7 sound

    Hi,
    I just performed clean install of Windows7 Ultimate on my ThinkCentre M55 (8811-FR9), everything works well except the audio, no sound comes out from the speakers.
    Looking at the Device Manager,"Digital Audio S/PDIF - High Definition Audio Device" is listed there but I believe S/PDIF port does not exist in the M55. Could it be the problem? I have tried to locate any sound driver for Windows7 in the lenovo.com with no success.
    Any help anyone can offer will be greatly appreciated.
    Thanks.

    All,
    I just stumbled on to a working solution. 
    Go to the Lenovo Support/Download site and download the Audio Driver for Vista.
    ADI SoundMAX High Definition audio driver for Windows Vista - ThinkCentre M55, M55p
    Version: 6.10.01.6100 Release Date: 2007/03/20
    The only tricky part is once it downloads the file V4aud05us17 and you run it,
    you will have to go to the /SWTOOLS/DRIVERS/Audio/v4aud05us17 directory and execute the "Setup" program.
    For some reason it doesn't auto run the program once the expansion job completes.
    Works like a charm, I de-installed, re-installed twice just to make sure it was a repeatable process.  Good luck...

  • Windows Vista sound problems on Qosmio F30

    Hi
    Ive recently installed windows vista on my Qosimio F30 and i have sound problems. Effects sound ok but speaking is really quite and distort. I have tried instaling a new driver for it but it gets to the end and says driver not installed properly.
    Please help!

    Hello
    What type of windows you installed? (Basic, home premium, business or ultimate)?
    make sure that you downloaded and installed this driver for f30:
    http://support.toshiba-tro.de/tools/qosmio/g30/vista/sound-vista-61053240.zip

  • Pp 2.0 and Windows 7 sound problem

    I received the error "The currently installed sound card driver does not support direct sound input. Recording is not possible." I tried many of the solutions offered on forums. This is what I found worked for me. (I have an HP with realtek hd audio)
    I plugged in external speakers.
    In adobe I went to Edit, Preferences, Audio Hardware, selected Pp windows sound, clicked on ASIO settings. For direct sound output ports I only have speakers selected and  "Yes" for sync reference. For direct sound input port I have stereo Mix selected and sync reference no. To the left I have "Direct Sound Output", "Full Duplex", and "Start Input First" selected.
    In my computers control panel under sound I have "speakers" selected as my playback and "stereo mix" selected as my recording.
    I hope this helps others who like me are not computer savvy.

    Thanks! Though I upgraded to solve the problem, this is good to know.
    Bob
    Date: Wed, 9 Nov 2011 04:45:42 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
    Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
    VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
    Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
    AND NOW YOU CAN USE PREMIERE PRO 2.0
    Enjoy
    Steve - Italy
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Resolve HP DC7600 Windows 7 Sound Problem

    If you are experiening the same problem then here is the right and simple solution.
    Log on to your HP Username and Password.
    Go to the URL: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=wk-786...
    or search: Realtek High-Definition Audio Driver for Microsoft Windows 7
    Download the file and run... Your driver is running...
    Thanks
    Ali Ayub

    which sound card do you have on lenovo 3000 ?
    ( press windows + r, enter "dxdiag", on the audio tab, post the device name )

  • HPProbook4430s windows 8 sound problem!!

    my laptop has sound and audio problem..i've been using windows 8...no sound on speakers or headphones..plz give me the solution...

    There are no drivers for Windows 8 yet, you will need to wait until there are or revert to Win 7

  • ThinkCentre M55 Windows 7 Install

    I have a M55 8811 and I installed Windows 7.  It runs, but every so often both of the processors go to 100% and the Mouse and everything hangs.  After a minute or 2 it stops running 100% and everything is OK.  It acts like I need some drivers, but I can't find Windows 7 drivers for the M55 8811.  Where can I find Windows 7 drivers for my M55 8811.

    OddManOut, thanks for the reply.
    However I had already done that and there are no Drivers for Windows 7, just XP, Vista, 2000.  I had thought about using the Vista drivers, but thought it might hose me up worse.

  • HT3983 i have a sound problem when i install windows 7 32 bit on my imac

    i have a sound problem when i install windows 7 32 bit on my imac

    Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
    Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • No sound problem in windows 8

    hi
    i am using Hp Pavilion Sleekbook 15-b001ee. didnot updated to windowa 8.1.
    problem is that my sound is not working. when i play any video or music file no sound.
    updated the driver.
    checked for prblm from hp wesite but didnt get any solution.
    help me. thanks

    Hello mani368447,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are not able to generate sound from your notebook when playing videos or music, and I would be happy to assist you in this endeavor!
    Since you have already updated the drivers for your computer, I recommend following this document on No Sound from Speakers (Windows 8). This should help restore the sound to your notebook.
    If the issue persists, I also suggest following the steps in this thread by SuperMario1.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

  • Macbook Pro with Denon AVR-X3000 / sound problem

    Hi there..
    I have a retina macbook pro and I am trying to connect it to Denon AVR X3000 surround receiver via. HDMI
    Denon is connected to the TV from HDMI out, so I have no problem with sending the video to the LCD via. receiver.
    My problem is with the sound modes.
    Normally, as the most basic example, when I connect my Apple TV to Denon and LCD with the same HDMI way, I get all the digital sound modes such as Dolby Prologic II, Dolby True HD, DTS: Neo6 etc..etc... And I get a very quality sound, with all the channels seperated etc.
    But when I connect my Macbook Pro to the system with the same way, what I can only get from the receiver are : STEREO, MULTI CHANNEL IN, MULTI CHANNEL STEREO and VIRTUAL.. I do not see any DTS, Dolby Digital, etc.
    Also, I can only get the "surround effect" from "MULTI CHANNEL IN" sound mode, but this time the audio quality is really bad...
    Tiny Apple TV gives me great sound but MB Pro cannot..
    I have tried to change some settings from the AUDIO MIDI setup, I chose 5.1 multi channel but nothing  happens from here...
    By the way, I am using Mac BluRay player and I am running bluray films from my computer.
    In my opinion, MBP cannot send high definition video and dolby-dts-prologic sound to the receiver at the same time..
    I don't have quite experience about this issue, maybe it is something, very simple. But I couldn't manage it.
    Maybe MBP is not capable of doing this... If so, I will be really disappointed because I was looking forward to purchase a Mac Mini and use it as a HTPC..
    All suggestions, recommendations are highly appreciated... THX

    Hi, i don't have a solution but i can share my experience with you which is similar. Mac Mini connected to Denon. On Mavericks  OS btw.
    two things.
    1. i was fiddling with the System preferences at one time, under Sound, playing around with the output options, honestly forgotten what i did but i managed to get into all the options as per normal, such as Dolby Cinema. Problem is, once i restarted the Mini, the same problem occured. Only those as u mentioned, Multi IN etc.
    at this point, i am still trying to figure out.
    2. I tried switching to windows, and the problem disappear. Meaning, the sound mode options are as per usual.
    u have any luck yet ?

  • Please help iPhone 5 sound problems

    iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

    fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

  • USB Sound Problem

    I'm having a problem with my Bose USB sound system that has just recently developed. The system is plugged directly into the back of my Mac Pro desktop so it's not going through any hubs or secondary systems. When I first start my computer the sound works just fine. But after about 10 to 15 minutes of use the sound stops completely - as if the sounds have been turned off. If I boot into Windows 7 using Boot Camp, the sound system there works just fine with no problems at all, so I do not believe this issue is hardware related but is something associated with OS X.
    This all started recently after installing Tinker Tool and then realizing that their latest version is not compatible with Snow Leopard. I followed their directions and told Tinker Tool to restore the previous settings and then I removed it from my system. Now, I'm having this USB sound problem. I think it's highly probable to be the cause of my problem.
    Is there anyway to reinstall the USB drivers in OS X without reinstalling the entire OS? Or, is there something else I can try to restore the USB function to Snow Leopard? Many thanks for any tips or suggestions.

    They are plug and play.
    I did try unplugging all of the USB devices and then powered off the computer and unplugged it for about 5 minutes as I heard that that sometimes solves USB problems. However, upon reconnecting the problem returned. All other USB devices seem to be working normally - it's only the Bose sound system. I tried plugging it into a different USB port in the back of the computer but the problem continued after about 10 minutes. Therefore, I am convinced this is not hardware related.
    At this point I am thinking I need to reinstall OS X Snow Leopard to undo whatever Tinker Tool damaged. Is it possible to just replace the USB drivers in OS X without reinstalling everything?

Maybe you are looking for

  • Siri recognizes a name when I say it, but says that she "can't find so-and-so" in my contacts, when that person is in my contacts

    As of my update to iOS 7 on my iPhone 5, Siri seems not to be able to find my fiance in my contacts. Her name is there, and Siri recognizes her name and spells it correctly when she says, "I don't see S*** R****** in your contacts... perhaps you mean

  • How many mAh is the battery that comes with the 8130?

    How many mAh is the battery that comes with the 8130? I opened my phone up and it does not say how many mAh it is. I am looking on ebay for an additional battery and want to get one equal to or better than the current one Solved! Go to Solution.

  • Debugger Initialization problem

    Whenever I am trying to start the debugger, it is not starting and showing messages as Error connecting to the DTM at [%s: %D] This is happening for some mappings in the 7.9.6.2 release. Please provide any known solution.

  • Signal Express Large TDMS File Recording Error

    Hello, I have the following application and I am looking for some tips on the best way to approach the problem with Signal Express: I am attempting to using Signal Express 2009 (Sound and Vibration Assistant) to collect random vibration data on three

  • HT5312 No link to rescue email

    I forgot my sercurity questions and i am currently trying to reset them, i have verified my rescue email and everything, yet there is no link under my two questions to send a email throught to reset them, there is nothing there? any idea why?