ThinkCentre m58 did not start booting from usb!!

heloo ..
i have ThinkCentre m58 , i tray to format it by usb bootable windows but the pc did not start booting from usb!!
my usb have windows insid it.

Thanks for your effort!!
I deleted solaris and I'll continue to use Debian

Similar Messages

  • Boot from USB-stick on old thinkpad?

    Hi,
    I have an old Thinkpad 600E. It runs arch linux (and does this really fine), but I just want to try something new...
    The thinkpad does not support booting from USB. I wonder if it is possible to boot a linux-distro on an usb-stick (like puppy) using GRUB on the thinkpad's hard drive - maybe someone has done this before or hasn an idea...?
    pseb

    For older hardware like yours, I would give SliTaz a shot (http://www.slitaz.org/en). It's very small (25MB) and looks very promising. It has had good reviews on linux.com and distrowatch (see http://www.linux.com/feature/140573).

  • G470 not booting from USB pen drive

    I have a perfectly working 4GB bootable USB pen drive with an installation copy of Ubuntu 10.10 on it.
    It works perfectly on several different laptops (Toshiba, Sony, HP).
    But no luck on my new G470 (Core i3), which I bought last week in Russia (no OS, just FreeDOS on it).
    Whenever I plug the drive in, it is recognised by the BIOS (i.e. appears in the boot order menu and in the BIOS settings), but when the laptop starts booting from it the laptop just hangs with a blank black screen or sometimes a white underscore in the top left corner (not blinking).
    I have tried moving the USB drive to the top of the boot order in BIOS settings, but to no avail.
    Trying to switch to the drive under FreeDOS does not give any results either.
    Checking on other laptops the drive still works fine, both for booting or reading under different versions of Windows and Linux.
    Is there some setting I might have missed in BIOS or maybe a newer version of the BIOS ROM I should flash?
    Seems strange that a brand new laptop is not capable of doing something as simple as booting from a pen drive (especially since other computers, like my 6 year old HP and even a 10 year old Toshiba have no trouble in doing whatsoever with the same pen drive).
    Any help greatly appreciated!

    It's a G470, my mistake in initial description.
    Found the right BIOS update here: http://consumersupport.lenovo.com/ot/en/driversdownloads/Drivers_Show_4480.html
    Flashed with new version - 40CN05WW (v2.04) replacing the original one 40CN20WW (v1.07). All went fine - new BIOS installed and works.
    The problem persists though. Whenever I choose to boot from a USB pen drive the laptop just hangs with a blank screen not reacting to key strokes (Ctrl+Alt+Del) and I have to power it off with the power button.
    Please help!
    Thank you.

  • Hp mini will not boot from usb and USB not listed as a choice

    I have an HP mini 110-1116NR and it crashed. During a system restore it stopped working so now there is no operating system on it.
    In BIOS there is no choice to boot from USB (when my disks come in mail from HP)
    Also when it kinda starts im at the DOS screen....system32.exe???????
    I dont know what this means

    Hi cathy69:
     Thank you for your inquiry.   I am pleased to assist you!
    I hope you had a great weekend!
    I see you are looking to change the boot order on your computer. Here is a link to 'Configuring the Boot Order in the System Bios" click here. Please let me know if you require further assistance.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Hi, I just want to start an learn using Elements, I just install Elements 5, But all the films did not start and others adobe films are only in english. Is this the real customer service, have I learn english perfect to get some informations from ADOBE ?

    Hi
    I just want to start and begin to work in Lightroom.
    I just installed the program.
    Now I want to get al lot of Information to understand the program. on this side: http://www.adobe.com/de/products/photoshop-lightroom/features.html
    But teh films did not start.
    On another page all films( other films) are only in english.
    https://helpx.adobe.com/de/lightroom.html
    https://helpx.adobe.com/de/contact.html?step=LTRM_how-tos-troubleshooting_how-tos
    Can this be really true, that I have to learn perfect english to get informations  from ADOBE to get informations about using the program ?
    I need a completly Trainee tomorrow to work soon in the program.
    Is there someone to give me the missing informations ?

    But teh films did not start.
    Those films at http://www.adobe.com/de/products/photoshop-lightroom/features.html worked when I played them. Maybe it's your browser, try a different one.

  • W520: Unable to boot from USB - device does not show up in boot menu

    I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
    The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
    I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
    Thanks,
        CS 

    Hello Neil
    Thanks for getting back to me
    The issue was that the usb drives were disabled in the bios from the  Startup menu.
    To enable
    1. Enter bios
    2. Select boot
    3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
    4. Select the device you require (in my case USB HDD)
    5. Save and exit.
    You can now boot from a usb stick and install the Linux distro of your choice :-)
    Cheers

  • HP Pavilion 11 x2 not booting from USB

    I have tried everything I can think of but my HP Pavilion 11 x2 will not boot from USB...I have Windows 10 currently installed on it and need to boot from USB to allow me to install a new OS on the machine.
    I have gone into hte bios...(which I can see is a locked bios with very limited options)....I have turned off the Secure Boot option and have set the USB has the first boot device.
    But when I hit F9 on startup...it just gives me 2 options:-
    OS Boot Manager
    Boot From EFI File
    I have tried Boot from EFI File...but this does not work..
    I know the USB is configured correctly as I can boot from it on my desktop computer.
    How can I get this to work?
    Thanks in advance

    hi,
    i stumbbled into your thread while i was looking for a similar answer for my Pavilion X2 10".
    mine was delivered with win 8.1 with bing. it was alright to use, but i was unable to bring this machine to connect to my office domain. due to the lack of networking features which is only available in the pro or enterprise version of win 8.1.
    i tried many ways to load in a win 8.1 pro os. the disc is authentic, keys are authentic, usb stick or optical drives; it makes no differences. the machine just refuse to boot into the usb disc / stick like all other previous system does.
    there isnt an option for the bios to go into legacy mode. however there is an option to turn off the secure boot, but that does not gives legacy support to the make the system boot to usb.
    i had probably done the same things you tried, no matter what setting is done to the bios, there is always only 'os boot manager' and 'ueif' when i hit boot sequence (f9).
    had tired everything that i can think of, talking to HP was like talking to an answering machine, and they were asking the most bacis questions ... "were you able to select 'legacy boot' from the bios menu?" ... even when i tell them there isnt a legacy boot option in the bios ... they were too amature .
    i concluded that the only way to boot to usb is to do it in uefi with secure boot off and encryption turn off in win 8.1 (else it will bring u to bitlocker).
    but i am still unable to boot into the usb media to install win 8.1 pro today. i gave up.

  • Cannot boot from USB HD on T61 & T61P Why not?

    Have bootable WD and Hitachi HDs in external USB enclosures.  Have successfully cloned one of these WD) using Acronis.  When trying to boot from the USB attached drive using PF12 and selecting the recognized drive on the boot menu get either BSOD or message unable to boot operating system.  What gives?  Know the WD will boot internally as it was the disk that came with the system.  Get the BSOD with this disk in USB port.
    Hitachi give me the unable to boot operating system message when trying to boot from USB drive.
    Using a TrekStor HD enclosure pn D260U20P10-3 which works fine if I boot the internal HD.  Can copy and even backup internal drive to external HD but can not boot from it. 

    Hello,
    As I understand it, Microsoft Windows 7 and earlier operating systems do not support booting natively from a USB Mass Storage Controller interface.  The installers do from things like USB-attached optical disc drives and flash drives, but that's not the full operating system.
    Support for booting from USB in the main operating system environment might be introduced in Windows 8—I thought I read something about this, but cannot seem to find a reference right now.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Cant boot from USB - Mavericks OSX

    Hi guys,
    i have a macbook air late 2008, it was working perfectly until some day,i was
    watching a video,and it just freezes..
    then i have to force restart it an so on, i cant start without freezing the screen i like...5 minutes or less...
    So i decided to format it... but the problem is i cant boot from USB too...
    heres the verbose :

    Did you ever get this to work?  I even made the Diag USB with the tablet 10 special code - and when I select the USB device for boot, screen goes black for a few seconds - then back to the menu.
    I can't boot a default win 8.1 Pro CD either (with a lenovo USB drive).
    I tried win10 and it pooched my system - does not boot at all, so I need to boot of an external device.

  • T61 cannot boot from USB harddrive

    My T61 cannot boot from USB harddrive. the drive have VID 058F and PID 6391, the drive is bootable on all other computers. What happened? The bios does not recognize the drive at all.

    cwang36, welcome to the forum,
    I've had some strange experiences with usb hard drives and would ask you to try the following;  when you want to boot from the drive start your T61, go into the BIOS > Startup > Boot menu and you should see the option USB HDD with a "-" in front of it. If I am correct you should exit BIOS, (F10 save and exit), upon restarting enter BIOS again and go again to the Boot menu. This time the USB HDD entry should have a "+" infront of it showing that the drive has been properly recognised.
    If my theory is correct, no guarantees, you can then exit Bios with F10 and hopefully boot from the drive.
    Hope this helps.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Multiple errors attempting to capture a Windows 8 reference image after booting from USB (Dell Latitude 10)

    From results.xml:
    <?xml version="1.0"?>
    <Results><Errors>8</Errors><Warnings>0</Warnings><RetVal>-2147467259</RetVal><DeploymentType>CUSTOM</DeploymentType><Messages><![CDATA[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.
    Litetouch deployment failed, Return Code = -2147467259 0x80004005
    Failed to run the action: Apply Windows PE.
    Unknown error (Error: 00001550; Source: Unknown)
    The execution of the group (Capture Image) has failed and the execution has been aborted. An action failed.
    Operation aborted (Error: 80004004; Source: Windows)
    Failed to run the last action: Apply Windows PE. Execution of task sequence failed.
    Unknown error (Error: 00001550; Source: Unknown)
    Task Sequence Engine failed! Code: enExecutionFail
    Task sequence execution failed with error code 80004005
    Error Task Sequence Manager failed to execute task sequence. Code 0x80004005]]></Messages></Results>
    I have not only regenerated my boot files while updating my deployment share, I have completely rebuilt the MDT 2012 deployment share from scratch, and I'm still getting the exact same errors. I can't figure out what is causing this. The only hits for these
    errors seemed to say that the -214... error is likely related to a missing file, but I don't know how to figure out what that might be. I don't know what the FAILURE ( 5456 ) could be caused by, either, although it seems to be related to not knowing what partition
    should be imaged or imaged to. I haven't been able to find any reference to MDT needing a partition to image from/to set in a CS.ini property or in a task variable.
    I am running a modified version of the Sysprep and Capture Task Sequence (set up as described at http://bjtechnews.org/2012/06/01/mdt-2012-capturing-a-reference-image-part-ii/, it's basically the default settings for that TS with the sysprep step disabled and
    the "Set Image Folder" task variable created per that post--I ran sysprep myself, manually, on the machine before shutting it down to boot from USB) after booting a Dell Latitude 10 tablet from a USB drive created by extracting the contents of the
    MDT 2012 DeploymentShare$\Boot\LiteTouchpe_x86.iso to a FAT32-formatted volume.

    Here is the second part of BDD.log:
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="21:18:42.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Z: mapped to \\NCSD-WDS\DeploymentShare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="21:18:43.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="21:18:44.000+000" date="07-23-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Not Wizard = False]LOG]!><time="00:44:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:44:07.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:44:08.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[CleanStartItems Complete]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #2" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="00:53:55.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDiskPartition : \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #1, Partition #0" \\MININT-IDKMK2C\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[New ZTIDisk : \\MININT-IDKMK2C\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE1"]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[ZTIUtility!GetAllFixedDrives = C:]LOG]!><time="00:53:56.000+000" date="07-24-2013" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
    <![LOG[Not Wizard = False]LOG]!><time="00:54:54.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = N]LOG]!><time="00:54:55.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[ Open Control File: TaskSequences]LOG]!><time="00:54:56.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceID is now = CAPTURE001]LOG]!><time="00:55:00.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallOS']]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallOS'] = False]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Task Sequence does not contain an OS and does not contain a LTIApply.wsf step, possibly a Custom Step or a Client Replace.]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[DeploymentType = CUSTOM]LOG]!><time="00:55:01.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceName is now = Capture reference image]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceVersion is now = 1.0]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TaskSequenceTemplate is now = CaptureOnly.xml]LOG]!><time="00:55:02.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = {9c976969-ab45-405b-82e7-d8a429228a67}]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageIndex is now = 1]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageSize is now = 7934]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageFlags is now = Professional]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageBuild is now = 6.2.9200.16384]LOG]!><time="00:55:03.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageProcessor is now = x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ImageLanguage001 is now = en-US]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[InstallFromPath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86\Sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property InstallFromPath is now = \\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[SourcePath: \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:04.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property SourcePath is now = \\NCSD-WDS\Latitude10Deploy$\Operating Systems\Windows 8 Pro x86]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallRoles']]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallRoles'] = ]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']]]LOG]!><time="00:55:05.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@type='BDD_InstallApplication' and ./defaultVarList/variable[@name='ApplicationGUID'] and ./defaultVarList[variable='']] = ]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:06.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence Item: //step[@name='Create WIM']]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Found Task Sequence step of type //step[@name='Create WIM'] = True]LOG]!><time="00:55:19.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:32.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:33.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property TSGuid is now = {ed8ed1ac-ab1a-448d-97b5-0d4cb1f7ef95}]LOG]!><time="00:55:38.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property OSGUID is now = ]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DeploymentType is now = CUSTOM]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property DoCapture is now = YES]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property ComputerBackupLocation is now = \\NCSD-WDS\Latitude10Deploy$\Captures]LOG]!><time="00:55:39.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property BackupFile is now = CAPTURE001.wim]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Property WizardComplete is now = Y]LOG]!><time="00:55:40.000+000" date="07-24-2013" component="Wizard" context="" type="1" thread="" file="Wizard">
    <![LOG[Setting variable ComputerBackupLocation to value \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ComputerBackupLocation is now = \\ncsd-wds.ncsd.local\Latitude10Deploy$\Captures]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:45.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:46.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageBuild to value 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageBuild is now = 6.2.9200]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:47.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:48.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable ImageFlags to value %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property ImageFlags is now = %OSSKU%]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:49.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:50.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Setting variable PHASE to value STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Property PHASE is now = STATERESTORE]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[ZTISetVariable processing completed successfully.]LOG]!><time="00:55:51.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[Event 41001 sent: ZTISetVariable processing completed successfully.]LOG]!><time="00:55:52.000+000" date="07-24-2013" component="ZTISetVariable" context="" type="1" thread="" file="ZTISetVariable">
    <![LOG[---------------- Initialization ----------------]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Validating connection to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Already connected to server NCSD-WDS as that is where this script is running from.]LOG]!><time="00:55:53.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Destination Logical Drive was not specificed, defaulting to #:\]LOG]!><time="00:55:54.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Looking for Sysprep.inf in #:\sysprep\Sysprep.inf]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The sysprep.inf file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePathSysprep is now = ]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[The unattend.txt file was not found.]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Found unattend.xml at \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml, will copy to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Copied \\NCSD-WDS\Latitude10Deploy$\Control\CAPTURE001\Unattend.xml to C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Property OSDAnswerFilePath is now = C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Loaded C:\MININT\Unattend.xml]LOG]!><time="00:55:55.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ComputerName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for MachineObjectOU]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for InputLocale]LOG]!><time="00:55:56.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Language]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LanguageGroup]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for SystemLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for TimeZone]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogon]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoLogonCount]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:55:57.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Dialing]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoMode]LOG]!><time="00:55:58.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AutoUsers]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UpgradeData/Upgrade not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OSDComputerName]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for ProductKey]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed parent of //settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/UserData/ProductKey/Key from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/ProductKey from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinDomain]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-UnattendedJoin"]/Identification/MachineObjectOU from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for JoinWorkgroup]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdmin]LOG]!><time="00:55:59.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for DomainAdminDomain]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with InstallFromPath=\\ncsd-wds\latitude10deploy$\Operating Systems\Windows 8 Pro x86\sources\install.wim (value was .\Operating Systems\Windows 8 Pro x86\Sources\install.wim)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="windowsPE"]/component[@name="Microsoft-Windows-Setup"]/ImageInstall/OSImage/InstallFrom/MetaData[Key="/image/index"]/Value not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageIndex=1 (value was 1)]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[<Message containing password has been suppressed>]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated PlainText entry to true.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[//settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/UserAccounts/LocalAccounts not found in C:\MININT\Unattend.xml, unable to update.]LOG]!><time="00:56:00.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Organization]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for BitsPerPel]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Xresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Yresolution]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Vrefresh]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for AreaCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for CountryCode]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:01.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for LongDistanceAccess]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="specialize"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Removed //settings[@pass="oobeSystem"]/component[@name="Microsoft-Windows-Shell-Setup"]/TimeZone from C:\MININT\Unattend.xml because the value was blank.]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for KeyboardLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:02.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UserLocale]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for UILanguage]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with ImageLanguage001=en-US (value was en-US)]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for Home_Page]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:03.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for OrgName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[No value found for FullName]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationDisk=0 (value was 0)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Updated C:\MININT\Unattend.xml with DestinationPartition=1 (value was 1)]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Rewrote C:\MININT\Unattend.xml with changes]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure COMPLETED. Return Value = 0]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[ZTIConfigure processing completed successfully.]LOG]!><time="00:56:04.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Event 41001 sent: ZTIConfigure processing completed successfully.]LOG]!><time="00:56:05.000+000" date="07-24-2013" component="ZTIConfigure" context="" type="1" thread="" file="ZTIConfigure">
    <![LOG[Will boot into Windows PE architecture x86 to match OS being deployed.]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationOSInstallType = BYDISKPARTITION]LOG]!><time="00:56:06.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationDisk: 0]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Found: DestinationPartition: 1]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[No drive mapped to Disk Partition: \\MININT-IDKMK2C\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Unable to yield a target Partition (Special Recovery option for Litetouch).]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[DestinationDisk and Partition did not yield a target Partition.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:07.000+000" date="07-24-2013" component="LTIApply" context="" type="3" thread="" file="LTIApply">
    <![LOG[Event 41002 sent: FAILURE ( 5456 ): Unable to determine Destination Disk, Partition, and/or Drive. See BDD.LOG for more information.]LOG]!><time="00:56:08.000+000" date="07-24-2013" component="LTIApply" context="" type="1" thread="" file="LTIApply">
    <![LOG[Removing AutoAdminLogon registry entries]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[VSSMaxSize not specified using 5% of volume.]LOG]!><time="00:56:12.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Logs contained 8 errors and 0 warnings.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[No Windows PE image to delete.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Stripping BDD commands from unattend.xml template.]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Modified unattend.xml saved to C:\windows\panther\unattend.xml]LOG]!><time="00:56:13.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Checking mapped network drive.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Z: mapped to \\ncsd-wds.ncsd.local\deploymentshare$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[testing drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Disconnecting drive Y: mapped to \\NCSD-WDS\Latitude10Deploy$]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up C:\MININT directory.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Cleaning up TOOLS, SCRIPTS, and PACKAGES directories.]LOG]!><time="00:56:14.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">
    <![LOG[Removing C:\MININT folder (final log entry)]LOG]!><time="00:56:15.000+000" date="07-24-2013" component="LTICleanup" context="" type="1" thread="" file="LTICleanup">

  • How Can I boot from USB - Portege A200

    Hi,
    I've got an Portege A200 which is only a couple of years old but the hard drive no longer works. Initially I thought this was due to corrupting the boot record on the drive but after attempting to replace the hard drive (with two different drives) it is showing an IDE #0 error upon boot. I have therefore come to the conclusion the IDE controller chip has died.
    In order to get the latop working I burned a cd with the ubunto ISO. This boots ok but due to only have 512Mb RAM the system is somewhat limited and anything installed is lost everytime I reboot.
    I have now bought a 2Gb flash drive and installed ubuntu onto this. My next problem is that there appears to be no boot from USB HDD or USB Memory Stick option in the bios.
    The possible options that I can think of are:
    1) Upgade the bios so it supports boot from memory stick (although no HDD so not sure how I could reflash the BIOS or if there is even a BIOS upgrade that would support this functionality)
    2) Create a cd which starts the boot process then tells the system to continue booting from the usb drive (Is this possible and does anyone know where I might be able to obtain such software)
    3) Boot from CD but use the USB to retain any information saved / any installs etc (I guess similar to option 2 except the cd would manage the whole OS and the USB would just hold 'additional' information)
    If there are any other options that anyone can think of I am happy to give them a go. Seems a shame to have to chuck a laptop that isn't particularly old because the IDE controller chip has failed on the mobo.
    I apppriciate any help anyone can offer.
    Many thanks,
    Mark

    Hi
    First of all I have to say that its not possible to boot from the external USB device like the USB stick, USB CD/DVD drive or USB HDD.
    Its possible only to boot from the external USB FDD (diskette) drive
    However, not the booting possibilities are clear but I think you have misunderstood the IDE#0 error message. In m opinion the IDE controller is not faulty but only the new HDD is not compatible and not recognized by BIOS.
    There are different reasons for this issue
    Mostly this error message appears if the HDD master/slave/c-sel settings are not correct.
    Usually such settings dont need to be changed or switched on 2.5 HDDs but some HDDs support an jumper which must be set in the right position. But I dont if your HDD supports this
    Furthermore the not compatible HDD size could be the reason for such error messages!
    So finally I would recommend contacting the ASP in your country to get a new, compatible HDD and to check if the same error persists.
    Good luck

  • Satellite C50-A634 wont boot from USB or DVD

    My new toshiba Satellite C50-A634 wont boot from usb, or dvd ,
    i have downloaded win 8.1 and burn image to dvd but i still get an error message "no bootable device......please restart system" .
    Can some one plz help?

    Hi
    Does Satellite C50-A634 supports internal CD/DVD drive or did you try to boot from external optical disk drive?
    You have to know that _Satellite C50 & Satellite C50D models *without* a built-in ODD_ are not able to boot from an external ODD due to a technical limitation.
    Details here:
    [Limitation of external boot media for Satellite, Satellite Pro C50 & C50D devices|http://aps2.toshiba-tro.de/kb0/TSB3B03JA0000R01.htm]
    Only USB flash drives are supported as external boot devices!
    It is necessary you can use a USB flash drive as recovery media on notebooks without a built-in ODD.

  • "The TestStand service did not start up promptly"

    I have a LabView Operator Interface startup problem with TS 4.1. If
    the OI is started immediately after system boot the operator may get apopup error from TestStand:
    "The TestStand service did not start up promptly"
    The
    TestStand Service has a dependency on RPC so if either does not startup
    before the operator launches the OI, he gets the message. If he
    dismisses the message there is no further error i.e. the software
    continues to work OK.
    The real problem is the end user does not like this message and wants it removed.
     Any suggestions how I can get rid of this message?
    Only ideas I can see at the moment - either to have some kind of
    delay timer on startup (this would need to be around 1-2  mins after
    boot
    on the system in question to stop it happening) or perhaps some LabView
    code to poll the status of the TestStand service somehow so that we
    wait for service to start before the OI communicates with testStand -
    and thus the
    popup does not occur.

    The service should not normally take any significant amount of time to startup. There are some issues with service startup that we have noticed in some cases, but I don't remember the details. I will try and find out and get back to you. In the meantime, or as a possible solution, you can use the Windows SDK to check the status of the service and to wait until it is running. I'm not sure if the following can be directly translated into LabVIEW dll calls, but it would definitely be possible to create a C/C++ dll with the following code in it and call it from LabVIEW (If you do not have access to a C/C++ compiler and/or would like me to, I can probably build a dll with this code in it for you):
    int MakeSureServiceIsRunning(void)
        SERVICE_STATUS serviceStatus;
        SC_HANDLE hService = NULL;
        SC_HANDLE hSCM = NULL;
        // Put variable into a good initial state for return value.
        serviceStatus.dwCurrentState = SERVICE_START_PENDING;
        hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
        if (hSCM == NULL)
            goto Error;
        hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
        if (hService == NULL)
            goto Error;
        do
            if(!QueryServiceStatus(hService, &serviceStatus))
                goto Error;
            if(serviceStatus.dwCurrentState != SERVICE_RUNNING)
                Sleep(100); // don't just do busy waiting, give up cpu time to other threads.
        while(serviceStatus.dwCurrentState == SERVICE_START_PENDING);
    Error:
        if (hService != NULL)
            CloseServiceHandle(hService);
        if (hSCM != NULL)
            CloseServiceHandle(hSCM);
        if (serviceStatus.dwCurrentState == SERVICE_RUNNING)
            return 1;
        else
            return 0; // An error occurred, or service is in an unexpected state.
    Or alternatively, if you want to do the polling inside of LabVIEW you could just do the following in the C/C++ dll:
    int GetTestStandServiceStatus(unsigned int *serviceStatusReturnResult)
        SERVICE_STATUS serviceStatus;
        SC_HANDLE hService = NULL;
        SC_HANDLE hSCM = NULL;
        hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
        if (hSCM == NULL)
            goto Error;
        hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
        if (hService == NULL)
            goto Error;
        if(!QueryServiceStatus(hService, &serviceStatus))
            goto Error;
        *serviceStatusReturnResult = serviceStatus.dwCurrentState;
        CloseServiceHandle(hService);
        CloseServiceHandle(hSCM);
        return 1; // success
    Error:
        if (hService != NULL)
            CloseServiceHandle(hService);
        if (hSCM != NULL)
            CloseServiceHandle(hSCM);
        return 0; // An error occurred. Perhaps TestStand service isn't registered.

  • The Web Logic Server did not start up properly

    Trying to start Weblogic Portal Server
    Result is :
    # Note: Server initialization may take several minutes.
    # Please be patient.
    <Jan 26, 2002 11:45:43 PM EST> <Info> <Security> <Getting boot password from user.>
    Enter password to boot WebLogic server:
    Starting WebLogic Server ....
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method weblogic.management.internal.Helper.preloadMBeanInfos()V
    from class weblogic.management.Admin
    at weblogic.management.Admin.initialize(Admin.java:212)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    Press any key to continue . . .
    What is goin on ??????

    "Bernie Ferguson" <[email protected]> wrote in
    news:3c7c6672$[email protected]:
    >
    Trying to start Weblogic Portal Server
    Result is :
    # Note: Server initialization may take several minutes.
    # Please be patient.
    <Jan 26, 2002 11:45:43 PM EST> <Info> <Security> <Getting boot
    password from user.> Enter password to boot WebLogic server:
    Starting WebLogic Server ....
    **** The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.IllegalAccessError: try to access method
    weblogic.management.internal.Helper.preloadMBeanInfos()V from class
    weblogic.management.Admin
    at weblogic.management.Admin.initialize(Admin.java:212)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    Reason: Fatal initialization exception
    **** Press any key to continue . . .
    What is goin on ??????
    I had this problem when I tried using Web Logic Server 6.1 SP2. When I
    switched back to SP1 it was fine.

Maybe you are looking for

  • Multi Level Categorization in Interaction Record

    Hello Gurus! We are implementing CRM 7.0 and setting up multi level categorization for interaction records and service ticket. I have managed to set up all the required config and the categorization schema in Web IC. It is working in service ticket.

  • Within JBuilder, Reading Environment Variable From a BATCH File

    Hi ppl: Following my scenario without JBuilder. I would like to be able to do the same with JBuilder, so that I can run my application from within. 1. In the DOS window, I run a config.bat file that sets up a whole bunch of environment variables and

  • For statment -- defining code with a for statment

    i want to be able to use a for statment for the following. I can change Strings, intagers and doubles with for statment but i don't know how to change number in the actoul code here is a small example of the code i want to shorten OutSideClass newCla

  • DDS support in CS5?

    Will ther be proper DDS support in CS5 or are we gonna have to continue using the non-x64 plugin from nVidia?

  • Error while archiving material

    Hello experts, I have activated the deletion flag and started Archiving for a material, when I run the program It is giving this error " there is no instance 00000000577192 found in INOB or Ibase Please help Thanks Satya