Thinking about using Time Machine for the first time...

I just assume that updates are inherently good to have, regardless of what it's for. I figure that the developers know a lot more than I do regarding the optimization or improvement of their own software, so I simply allow their download. I'm thinking about using my Time Machine for the first time and reverting back to the pre-9.1 install, if that's even possible. Things were working fine for me and now there are all kinds of issues with communication between my Axiom Pro 61 and Logic. Nothing responds through Hypercontrol anymore, and I don't expect any updates from M-Audio until at least 2012. Anyone else thinking about taking this route?

Yes, I did. I opened that version immediately after I discovered that 9.1 had that effect and the controller was still inoperative. Of course, I still have MIDI input and PB/Mod wheel control, but that's about it. Everything else would need to be manually loaded, which the Pro series is supposed to do automatically. I haven't restarted my iMac yet, nor have I tried removing the keyboard from the computer altogether and perhaps reconnecting it. Maybe that would reset it...

Similar Messages

  • Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

    Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
    Regards
    TD

  • Using time machine for the first time in a while

    Hi all,
    I just tried backing up my laptop for the first time in ages with time machine. However , it seems to get stuck on "preparing the back up" and never actually starts the backup.
    The external drive I'm  using has been used before for backups,and the icon is the bluey colour it should be on my desktop as the back up location, however the back up simply won't start.
    I should mention that I have upgraded this laptop to another newer model which I since returned and went back to this older model. I also replaced the hard drive, and this is the first time im trying a time machine backup since those two changes
    Not many options I can play with so I can't see why it doesn't start the back up...it never took a longtime before to start...
    Could it be anything to do with space? Now the comp has about 490gb needing back up and there's only 100gb of space on the ext hd,because there's about 400gb of previous back ups on there. I didn't think this would be a problem though as I understood time machine just erases old backups when it doesn't have space
    Any suggestions welcome! Thx in advance!
    Both laptop capacity and ext hd are 500gb

    Couple of clarifying questions:
    1) How long are you waiting?
    2) Have you upgraded the OS to Lion?
    When I upgraded from Snow Leopard to Lion, the first few time machines took hours 'preparing to backup' before the actual backup to occur. We're talking 6+ hours. I'd usually leave it over night to backup. Even my last fresh reinstall of Lion took about 20min to prepare the first time. Now the hourly backups take maybe 1min total.
    My suggestion is to leave it over night and see what happens. It very well could be that the differences between your last backup and current machine state is so different it's taking a long time to determine all the changes.

  • I am going to back up to Time Machine for the first time

    which I know sounds nuts. I was manually doing it for the past 6 months- don't ask  why.
    Do I have to completely wipe out my Lacie and do any formatting to it? Or do I just delete everything from it and set my Time Machine to default backup to that drive and go from there as if I'm doing it for the first time?
    Also, I don't keep my EHD attached constantly to my laptop- I assume that is not a problem and whenever I hook it up, I can then ask TM to go to work?
    Sorry for the basic questions- appreciate the help!
    Thanks,
    Bernice

    I haven't burned a CD in years. My old MacBook doesn't have a DVD burner.
    The biggest issue is the size of your various drives. For Time Machine, your Time Machine drive should be three times the size of the drive you are backing up. If you don't quite have that (and I don't), you can get away with three times the amount of data you are backing up. Whichever configuration gives you that equation should be the one you use for Time Machine. You can partition one of the external drives so that one partition is big enough for Time Machine and the other is used for other purposes, such as archives. I have one external drive configured like that. If you don't have enough room to partition, then dedicate one drive to Time Machine and the other to archives and/or clones.
    Some people feel it is very important to maintain a long Time Machine history and migrate that to new drives. I don't quite understant that. I use Time Machine for backups, nothing more. I blow away all my backups on a fairly regular basis and start a fresh one. I don't need six month old versions of files. If I accidentally delete a file, I will notice sooner than that. If I have a hardware failure, I only need the last backup.
    I currently have those bootable clones only because my MacBook is in a funky state right now (long story) and my MacBook Pro is a work machine bound to an Active Directory domain. I can't rebuild that system by myself without IT from work and that would be difficult for me (longer story). I don't consider bootable clones to be a regular part of my backup strategy. They are useful snapshots and archives for specific times when I feel I need them.

  • Using Time machine for the first time.

    2 questions.
    1) Can I have more than one time machine ( 3 internal HD > 3 Time Machine for example) on the same computer?
    2) Can I assign two different HD to the same Time Machine?
    Thanks
    MP

    Yes, but if you are using Snow Leopard you will need to manually switch between configurations.
    Yes, you can backup multiple drives to the same Time Machine backup drive.
    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.

  • Should I upgrade to Mac OS X v10.7 before I use Time Machine for the first time?

    I bought a macbook pro in 2008. I recently purchased an external hard drive and I can't decide what's the best option:
    1. Use Time Machine using Snow Leopard 10.6.8 ?
    2. Upgrade to Lion before I use Time Machine (first time)
    3. Or just drag my photos and music manually (those are the only things I need to back up)
    Thoughts?

    I see. My only fear is there seems to be a lot of people who orginally were using Time Machine on SL, then upgraded to Lion and now Time Machine becomes screwy.
    Also, if I buy a new Mac (eventually) with Lion, I worry that if I've been using TM on SL, the transition to Lion wont be smooth. I may be overthinking this, but I just want to get it right.
    But I see your point: I need to get a full back up of my system as it is now before I make any changes. Thanks for your help.

  • Running Time Machine for the First TIme

    I have finally decided to run Time Machine. I'm guessing it's a bad idea to mess around on my computer while it's backing up. But it's taking forever. Can I still work while it's doing the initial BackUp?

    GagReel wrote:
    I have finally decided to run Time Machine. I'm guessing it's a bad idea to mess around on my computer while it's backing up. But it's taking forever. Can I still work while it's doing the initial BackUp?
    yes, you can. it might increase the backup time a little but it's probably easier than waiting.

  • HT1175 Trouble with using Time Machine for the first time.

    I do not see the "Change Disk" option. Once I switch it to on, a window pops up that only has one option which is "set up another time capsule." I click that and it searches for something using airport utility with no results. What am I doing wrong/anyone know what the problem is?

    Very fortunately I don't use Lion.. and I know it displays things differently... are you sure you are looking in the right place.. Have you opened the section for network.. or do it manually..
    In finder (hopefully lion is similar) in top menu, go, go to server.. and type in AFP://TCIPADDRESS.
    Obviously put in the actual IP address for my TCIPADDRESS.. or use the TCNAME.
    Connecting by both ethernet and wireless is not helping btw.. use one or the other. Although for discovery it is fine actual file transfer gets messed up.. stick to wired for files..
    If you still have issues.. press and hold reset for 10sec.. if the TC does not come alive.. I am not sure.. open the network preferences and check that you are getting IP address from it.. and then open a terminal and ping it..
    Thus..
    $ ping tcgen3
    PING tcgen3.bigpond (192.168.2.65): 56 data bytes
    64 bytes from 192.168.2.65: icmp_seq=0 ttl=255 time=2.678 ms
    64 bytes from 192.168.2.65: icmp_seq=1 ttl=255 time=0.810 ms
    64 bytes from 192.168.2.65: icmp_seq=2 ttl=255 time=7.193 ms
    64 bytes from 192.168.2.65: icmp_seq=3 ttl=255 time=0.943 ms
    64 bytes from 192.168.2.65: icmp_seq=4 ttl=255 time=0.931 ms
    ^C
    --- tcgen3.bigpond ping statistics ---
    5 packets transmitted, 5 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 0.810/2.511/7.193/2.441 ms
    Notice I use a short, no spaces pure alphanumeric name.. this is a big help.. and easier to type!!
    You can also disconnect every other network connection.. make sure nothing is connected to the TC or computer.. they are all alone in the world. Restart both.

  • Trying to use laf project for the first time

    hi all , i need help , please
    i am trying to use laf project for the first time as i said , and i want help on
    the installation process
    step by step please , i am soo junior here
    i've just downloaded the zip file as the site said (http://fdtool.free.fr/LAF/doc/implementation.htm)
    please go to this url and declare the steps to me
    thanks in advance

    The Forms Look and Feel Project is not an Oracle product. This product was developed by Francois Degrelle. Francois has posted numerous times in this forum that if you need help with the LAF you have to go to the Oracle Forms Look & Feel Project web site or his PJCs and Java Beans Forum for support.
    Craig...

  • I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

    I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

    That seems to be OK via WLAN!
    It ist better to do the first backup via LAN-cable.

  • Hi i want to use boot camp for the first time but i was wondering if when you install windows in your mac there is any risk of virus?

    hi i want to use boot camp for the first time but i was wondering if when you install windows in your mac there is any risk of virus?

    angelicagalera wrote:
    hi i want to use boot camp for the first time but i was wondering if when you install windows in your mac there is any risk of virus?
    Of course there is. There is with any computer system that you connect to the internet or transfers files to and from. When you run Windows on your Mac you increase the chance from zero that you will get a Windows based virus to virtualy the same risk as any other Windows user.
    The weaknesses in Windows OS and applications are well trodden by virus and worm malcontents the world over. That doesn't mean that OSX is exempt though. All it will take is once and the entire Mac world will sit up and take notice......
    Rick

  • I am using garage band for the first time.  I dragged and dropped a song from itunes into the program and I want to extend the length of the song by repeating the first 28 measures.  I can't figure it out.  Please help

    I am using garage band for the first time.  I dragged and dropped a song from itunes into the program and I want to extend the length of the song by repeating the first 28 measures.  I can't figure it out.  Please help.  I have spent several hours trying to figure it out on my own but have not been successful.  It seems like an easy task.  Can anyone help?

    dewin1or wrote:
    I want to extend the length of the song by repeating the first 28 measures.
    split the region at the 28th measure
    http://www.bulletsandbones.com/GB/GBFAQ.html#split
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    then select only the first region and option-drag it to the end of the song

  • I'm setting up my Time Capsule for the first time and cannot get an internet connection throughWAN connection

    I'm setting up my Time Capsule for the first time and can't get an internet connection via ethernet cord

    So new AC model TC??
    What modem is it? Pure cable modem .. did you power cycle the modem ( OFF for at least 30min..)??
    This is essential to lose the old setup and start afresh. 
    How have you setup the TC?
    Did you try just bridge to existing router? If it doesn't get an IP and you just bought it, possible it is faulty.
    Lots more details.. really important things like did the ethernet connectivity leds go on.. both the TC port and the modem port - front ethernet indicator should light up..

  • HT1145 I am setting up my Time Capsule for the first time, all of my connections are right but, AirPort is not recognizing the Time Capsule or my network!

    I am setting up my Time Capsule for the first time, all of my connectiions are correct but, AirPort Utility is not recognizing my Time Capsule or my network?

    Try connecting your iMac to the Time Capsule with an Ethernet cable to see if that allows AirPort Utility to "see" it.

  • HT1933 Can you help.  I have been playing Modern War for some time, but for the first time i purchased a money item for the game. Unfortunately the item was never received.  I have contacted funzio the games creators and they have told me i need to contac

    Can you help.  I have been playing Modern War for some time, but for the first time i purchased a money item for the game. Unfortunately the item was never received.  I have contacted funzio the games creators and they have told me i need to contact Itunes direct.  Is that correct

    You can contact iTunes support via this page and see if they can help (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Maybe you are looking for