Thinking of purchasing EA6500. Can it monitor bandwidth use by device

I'm thinking of purchasing a Cisco Linksys EA6500. I need a router that can one monitor bandwidth used by device. Keep exceeding our ISP's network bandwidth allocation, need to identify the devices that are causing this high usage and be able to do so from the router. Does the EA6500's standard software support this, is their router software one can obtain for the unit that does this or is there another home router option that can perform this function? Stephen, Madeisky

If I were in your shoes, I would find a router that supported it. Linksys routers aren't designed and marketed for stuff like that.
As was previously said, netgear routers are the only ones that I'm aware of that do that. But there could be others.
Check here:
Www.smallnetbuilder.com

Similar Messages

  • I have an Apple Cin HD Display 23" monitor, purchased in 2006.  I use it with a old PC (2007) running Win XP.  Works fine.  Can this monitor be used with a new PC with Intel 4th gen i5 processor, running Win 8.1?

    I have an Apple Cin HD Display 23" monitor (part no. M9178LL/A), purchased in 2006.  I use it with an old PC (2007) running Windows XP.  Works fine.  Can this monitor be used with a new PC with Intel 4th gen i5 or i7 processor, running Win 8.1?

    I have an Apple Cin HD Display 23" monitor (part no. M9178LL/A), purchased in 2006.  I use it with an old PC (2007) running Windows XP.  Works fine.  Can this monitor be used with a new PC with Intel 4th gen i5 or i7 processor, running Win 8.1?

  • I have purchased CS6, can I install it on multiple devices? Purchased as home user

    I have purchased CS6, can I install it on multiple devices? Purchased as home user

    You can install and use the software on one secondary computer. So you can use it both at work and at home. See the following excerpt from the EULA.
    Can I use my software on two computers?
    If you own, or are the primary user of, a single-user or volume license Adobe product that is installed on a computer at work, you can also install and use the software on one secondary computer of the same platform at home or on a portable computer. However, you may not run the software simultaneously on both the primary and secondary computers.
    No more than one user can use a single-user license Adobe product.
    For complete details, see http://helpx.adobe.com/x-productkb/policy-pricing/end-user-license-agreements-faq.html

  • Monitoring Bandwidth Use

    Now that Comcast is placing a limit on bandwidth use, I would like to know if there is a way to monitor bandwidth usage on the ATV. Comcast advised that you can download software onto computers that monitor bandwidth usage. However, I'm not sure if this would work on ATV.
    My concern is that we use our ATV for a huge percentage of our media content.
    Anyone else concerned about this bandwidth limit?

    In some cases the interface with your router will allow you to reset your up and down data count, you could possibly monitor your usage that way.

  • I just purchased a 28" 4K monitor to use with Premiere Pro CS6 in WIndows 8.1 and the fonts are super tiny.

    No matter what settings I choose, the fonts on the display are impossibly tiny.  The menu fonts at top are readable, but everything else feels like I am taking an eye exam. 
    Is this fixable, or do I need to return the 4K monitor and fuhgedaboutit? 
    Since I am doing some shooting in 4K, I thought this monitor would make sense. 
    If in fact it can't work with PP CS6 on WIn 8.1, what is the best recommended monitor to use with PP CS6?

    Hi Hbrandado,
    hbrandado wrote:
    No matter what settings I choose, the fonts on the display are impossibly tiny.  The menu fonts at top are readable, but everything else feels like I am taking an eye exam. 
    Is this fixable, or do I need to return the 4K monitor and fuhgedaboutit? 
    Since I am doing some shooting in 4K, I thought this monitor would make sense.
    I understand your issue and I don't have a solution for you. Sorry. In Premiere Pro CC 2014, you can increase the size of the fonts in the Project panel, but not in CS6.
    hbrandado wrote:
    If in fact it can't work with PP CS6 on WIn 8.1, what is the best recommended monitor to use with PP CS6?
    You may want to ask this in ourHardware Forum.
    Lots of gear heads that can help you there.
    Thanks,
    Kevin

  • Can we monitor SM35 using CCMS

    Can we monitor, SM35 transaction by configuring CCMS?
    suppose a background job fails, can CCMS alert a user by email ?
    upto what level can CCMS be used to monitor systems? any ideas please share.
    Thanks
    Usman

    Sonali,
    You can do this through solution monitoring functionality of Solman.
    Solution Monitoring helps you to manage heterogeneous system landscapes efficiently.
    You can manage:
    ●      your systems and
    ●      your business processes
    in one tool.
    This uniform overview guarantees high performance and availability of all your business processes across various systems and system components. The SAP Solution Manager provides predefined views and values in the function sessions.
    The system monitoring guarantees the real time monitoring of all systems in a solution, based on the Computer Center Management System (CCMS).
    The CCMS provides a range of monitors for monitoring the SAP environments and its components. These monitors are indispensable for understanding and evaluating the behavior of the SAP processing environment. In the case of poor performance values, the monitors provide you with the information required to fine tune your SAP system and therefore to ensure that your SAP installation is running efficiently.
    The CCMS analysis monitors provide functions for
    ·        Checking the system status and the operating modes
    ·        Detecting and correcting potential problems as quickly as possible
    ·        An early diagnosis of potential problems, such as resource problems in a host or database system, which could affect the SAP system
    ·        The analysis and fine tuning of the SAP system and its environment (host and database system) to optimize the throughput of the SAP system
    Hope this helps. Please assign points and let me know if you need anything specific.
    Rgds
    Manish

  • Can I monitor bandwidth usage?

    Hi
    I have an Airport Express being used by two PC's and a Mac; I'm using a PC whilst my Macbook is repaired. But the internet gets really slow and I suspect someone (not me, one of the other two) is most likely downloading in extreme amounts. Is there an application of such that will allow me to see who's using the most bandwidth?

    I run vnstat on my router and have it update the figures every 5 minutes. I don't know if it's very accurate since I get 3 different numbers for my interfaces:
    rx / tx / total / estimated
    eth0:
    yesterday 832.96 MB / 2,325 MB / 3,158 MB
    today 864.36 MB / 1,363 MB / 2,227 MB / 2,928 MB
    eth1:
    yesterday 2,371 MB / 862.99 MB / 3,234 MB
    today 1,396 MB / 885.23 MB / 2,282 MB / 2,998 MB
    ppp0:
    yesterday 3,011 MB / 3,724 MB / 6,735 MB
    today 1,311 MB / 787.56 MB / 2,099 MB / 2,758 MB
    Unfortunately (more like OMFG YES IT'S GOD'S GIFT!!!!) my ISP's traffic monitor is totally screwed up so I have no way of comparing these numbers.
    I don't think it eats up a lot of resources tho, so you could run it together with other apps.

  • Can you monitor signals using frame api on a PDA?

    Hi all
    I'm pretty new to LV all together, but I'm working on writing a program to monitor information off our CAN network, like oil pump speed, water temp, batt voltage, etc.  Is there a way to monitor these signals using the frame api, opposed to channel api, and display them continuously on a gauge/meter?  Since I'm using PDA module, I have to use the frame api, and not channel.  Frame api seems a little more vague to me than channel api.  Any advice or tips are welcome.
    Also on a side note, I copied/pasted a tab that i changed the background color to yellow from a windows targeted program to a PocketPC one.  The tabs stayed yellow when I built and transfered the .exe to the pda, but i don't have any control now on its color because PDA module doesn't have Property Nodes.  Every now and then, the tabs will go to default grey, and i have to undo the changes to get it back to yellow.  Is there some way to control the color?  I don't think the Change Control Color works in this case.
    Thanks ahead for any comments and advice.

    ....By the way, i'm using a PCMCIA-CAN/2 (HS) card on a PDA running WinCE5.0 and soon to be one running WinCE4.2...

  • Monitor Bandwidth used

    Hi
    Just curious if there is a way to monitor the traffic flowing through an Aironet 1200 series device to allow for billing per IP/MAC address??
    I can seem to find anything on this...

    Hi,
    You may want to look at a management device such as the Allot Net-enforcer.
    This will allow both IP based bandwidth management and monthly accounting for all your clients as well many other features.
    Our Cisco wireless network covers over 20 communities and we have utilized this device since day 1 to manage all of our clients including QOS for business and residential services.
    Hope this helps..
    Regards
    Kevin

  • All but 5-6 of my songs have been deleted from my ipod shuffle.  I can find the list in purchased but can't get them on my device.

    Allbut 5-6 of my 44 songs on my Ipod shuffle have been deleted. They all show up on my purchases but I can't transfer them to my Ipod shuffle device.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

  • Can two monitors be used in place of retina display on new MBP?

    I want to set up my new MacBook Pro (w. Nvidia graphics) with two external monitors.
    Can I do this while shutting down the internal retina display to conserve graphics memory and boost performance? Thanks.

    I want to set up my new MacBook Pro (w. Nvidia graphics) with two external monitors.
    Can I do this while shutting down the internal retina display to conserve graphics memory and boost performance? Thanks.

  • Can one monitor be used with 2 computers?

    I have a PC and will be buying a Mac Pro soon. I really want to avoid using 2 monitors. I heard that it's possible for the Mac display to be used with 2 different computers. Is this possible? How would I switch between viewing my PC & viewing my Mac if I was just using the Mac display for both computers?

    Your solutions are going to be an Apple monitor with a DVI KVM switch to share the monitor, or get a non-Apple monitor. At this point in time it may be better to get a non-Apple monitor with 2 switchable inputs as mentioned above. As the rest of the monitor industry has kept moving over the last couple of years, Apple monitor specs have not gone up and prices have not gone down, so Apple monitors are getting out of date and overpriced.

  • How can I monitor the used memory

    Does java have any API function to monitor how much memory of the java-application used?

    http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Runtime.html
    note the ---Memory() methods

  • HT1349 When i click the buy it's asking me for a security question cause of the first time of using device for purchasing a game,but im already using this device before

    It's really not working..i always
    Buying an iTunes card and redeeming in one device but asking me a
    Security question cause of first time using device
    For purchasing oh my i already using this device

    Joiz wrote:
    {snip}. . . I don't remember..i know my email add and my password but I dont know the answer. . .
    There's not much anyone here can do for that particular issue.
    Your best bet is to seek assistance from iTunes Support.  If there is an alternate way to accsess your account, it will only be through them.
    http://www.apple.com/support/itunes/

  • I have a 2nd generation iPod touch and it shows to be connected to WiFi but will not access the internet, please tell me what i can do, because i use this device for work and it make things difficult that it will not work now. Please help, thank you!

    I really need help, my ipod shows to connect to the WiFi but then it will not let me use the interent it says no connection but according to my screen i have WiFi connection, i am very confused an i would really appriciate it if someone could help me sort out this problem so i can start using my iPod for work again.

    Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router.  Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address.  To correct this you can reboot your router by unplugging it from power for about 30 seconds.
    It wouldn't hurt to also reset your iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    See here for more troubleshooting assistance.
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

Maybe you are looking for

  • Itunes wont sync apps to ipod touch

    I bought a second gen iPod touch last Christmas for my son, and loaded it up with the preschool apps from my iPhone with no problem. However, after the initial installation, I have not been able to get any apps to sync from iTunes to the iPod. The ap

  • How to get the list of all users

    Hi, Is there a way in Grid Control for getting the list of all users on all target databases? I need to count how many Oracle db users in our company. Thanks a lot.

  • Can Send Mail, But Can't Receive Mail (Post Safari 3.1 & Security Update)

    Weird! I was able to receive mail when I first came in today, but since updating this morning to Safari 3.1 and Security Update, unable to receive messages. In "Activity Viewer", I can see Mail trying to get messages but stalls on "Fetching new mail.

  • Blue ray player connection to web help

    Just wondering if any iMac people have recently successfully connected their blue ray player to the internet? Apple tells me that I have to purchase "Apple TV" device. The Sony player (BDP-N460) I purchased said I only need to buy an additional 'Link

  • I want to purchase photoshop cs6 for Middle East (arabic , hebrew support)

    hi were can i find the photoshop cs6 for Middle East to purchase on adobe.com ? i want to purchase a full version . the interface is english but it supports arabic and hebrew . thank you .