Thinking of switching to FIOS - Have some general questions:

I am interested in getting FIOS internet and the TV essentials bundle.
In regards to the free 3 month dvr deal - After the 3 months are over do I have to keep the 19.99 DVR or can I drop down to the HDDVR 15.99?
With the TV essentials it lists like 250 channels and up to 14 HD channels. What does "up to" mean? Do I get to pick channels or something?
I have two TV's in my house. If I want the downstairs tv to be able to watch cable do I need to get an additional box?
Can I connect the FIOS internet to a wireless router so my laptop can connect to it?
Thanks. I'm just trying to figure out if it is going to be worth it to switch.

Spacerobot wrote:
I am interested in getting FIOS internet and the TV essentials bundle.
In regards to the free 3 month dvr deal - After the 3 months are over do I have to keep the 19.99 DVR or can I drop down to the HDDVR 15.99?
It's the same box. When the 3 months is over you can turn of the Home Media Feature and pay only the 15.99. (when you call many reps on the phone will claim you need to swap boxes but that usually gets sorted out later)
With the TV essentials it lists like 250 channels and up to 14 HD channels. What does "up to" mean? Do I get to pick channels or something?
You don't get to pick anything. If you pay for the higher Extreme HD package you get more of the HD versions of channels. If you don't you only get a small number typically the main networks
I have two TV's in my house. If I want the downstairs tv to be able to watch cable do I need to get an additional box?
Some TVs have a built-in QAM Tuner. If your TV has one it can play some channels. This TV would not get any on-screen guide or Video on Demand (the ones below channel 50 ) without a box.
Some TVs can use a Cablecard. If you order a cablecard (monthly fee) you don't need a box. This TV would not get any on-screen guide or Video on Demand
Otherwise you need a box. There is a low cost version that is smaller and gives all channels but no guide or Video on demand. They are usually 3.99
Can I connect the FIOS internet to a wireless router so my laptop can connect to it?
Your install with come with a Verizon provided wireless router. Just make sure the router is placed in a location that will allow your laptop to connect.
You also have options to use your own router. You can review the options in the NETWORKING section of this FAQ guide http://www.dslreports.com/faq/verizonfios
Thanks. I'm just trying to figure out if it is going to be worth it to switch.

Similar Messages

I have some general questions about Java

Is there a such thing as a list of every Exception in Java?
Is there somewhere I can look at examples of try statements, catch statements I guess tutorials on the basics of Java, like what would constitute these statements.

Thanks so much. This helps with the questions that I have. I am taking a class, where the only input I'm getting is "feedback". I'm expected to read the chapter, do the assignments, mind you this is the first time I have ever seen Java. Most of the class dropped out and now I see why.
I asked the questions I did, because I didn't know "what" I understood the books explanation of the try statement pertaining to it's example, but I have nothing to apply "across the board" when it comes to try statements. The links you gave me were great, I now know how to tailor my questions. I will use the example in the link you gave me and try to equate it to my assignment. (This is a perfect example!)
readFile {
    try {
        open the file;
        determine its size;
        allocate that much memory;
        read the file into memory;
        close the file;
    } catch (fileOpenFailed) {
       doSomething;
    } catch (sizeDeterminationFailed) {
        doSomething;
    } catch (memoryAllocationFailed) {
        doSomething;
    } catch (readFailed) {
        doSomething;
    } catch (fileCloseFailed) {
        doSomething;
}I know that hitting enter more than once, entering a non integer (7.4), or entering a character "w" will cause a NumberFormatException. I am to enclose the methods in the try statement. Does that mean that I start with try {, then the section of code? Then I need a statement or code? This is where I am confused. I look at the example above and those are actual statements. Will it come a time when after "try" i will need code?
What would be my statement? Is this something that I make up? ( I know these questions are dumming it down ALOT but once I get why something is done, I'll get it everytime.) My try statement has to say something to the effect that if the user trys to enter a non-integer value....am I right so far???
try
//Calling the user-defined methods
multiplier = getNumber();
correct = takeQuiz(multiplier);
System.out.println("\t\tYou got "+correct+ " correct!" );
user inputs any invalid, non-integer
catch (NumberFormatException e)
}

I have some more question

I have some more question.How can I create web.xml and check it.And
how can check the URL patten.thanks

write a simple Test servlet,compile it and place it in your WEB-INF\classes of your application context.configure this servlet class in your web.xml and access it thru your browser to test it all
Regards
padmanava

HT5312 This whole security question crap is a hassle. If I wanted to talk to someone one the phone to have some dumb questions reset, I would call them. Why can't they just send it in my dang e-mail. So forget it. I'll just forego the purchase.

This whole security question crap is a hassle. If I wanted to talk to someone on the phone to have some dumb questions reset, I would call them. Why can't they just send it in my dang e-mail. So forget it. I'll just forego the purchase.

Then call iTunes Support and get them reset:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email:
https://ssl.apple.com/emea/support/itunes/contact.html
If you have another iOS device or another SMS-capable device, you can use this method:
http://support.apple.com/kb/ht5570
Read the entire article carefully to see if this method would be a preferable approach for you.
Cheers,
GB

SAP CM25 which profile to use and why and some general questions

Hi there,
I have a few general questions, if you may share your thoughts on this.
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
Thank you

Hello
In a manufacturing environment, is CM25 more used to finite schedule the work centers or labor or both ?
It can be used for both depend upon bottle neck resource whether machine or labour.
Is it a good idea to even finite schedule the planned orders or just production orders ? We want to create production orders 1 week ahead of the production schedule and planned orders gets created 3-4 weeks earlier than production order gets created.
Better it should be finite planning for planned order also you can use MRP with lead time scheduling.
The graphical tool seems to be slow sometimes when dispatching and doing some actions on the screen, has any one have any say on this. Should we need to have better computers on the floor for this to work ?
It depends upon the data load and selection,
Restrict the number of objects to be displayed, for example, select only a small number of work-centers/orders.
Customize the time profile (transaction OPD2) such that the database read period, the planning period and the evaluation period are as small as possible. As a result, fewer objects are read and displayed.
Refer KBA 2038780 - Tips for performance improvement on Capacity Leveling
If you want to process more orders, check whether a batch planning (planning in the background on transaction CM40) is possible.
I have been trying my solutions using CM25 and not CM21 or CM27 using the profile SAPSFCG005, is there any other profile that I need to consider and other transactions to consider like CM21 or CM27 for certain purposes?
It depends upon your requirements which transaction to use and which profile. You can customize your own profile also.
Best Regards,
R.Brahmankar

Njawin - jcomgen and some general questions

Hi.
I'm currently evaluating njawin, and some questions came up:
Will there be a command line interface for jcomgen?
The interactive GUI isn't really suitable for an automated build process.
njawin compared to jawin:
njawin seems to be more advanced, but there's no source available.
Does anybody know if this will change in the future?
regards,
roman

Carl,
The njawin distribution available for "evaluation" download around the web comes with no license, as it is a version of OLE for Java (OLEJA), a commercial product, which was developed before OLEJA went retail.
One thing you'll notice is that OLEJA and Njawin have remarkably similar APIs. If your application's functionality does not have very complex requirements, you can simply replace all references to "oleja" with "njawin", and all references to "compose" with "develop". This holds true for the generated .java files, the .xml file, etc. I am not sure if OLEJA introduces or uses more APIs than the ones that appeared in Njawin, but for my application, this approach was successful.
One other thing to keep in mind is that I don't see why you'd actually need to build your sources into a jar, if you simply include them in a larger package as part of your application's source code. Just put njawin.jar, njawin.dll, and yourdll.dll on the build path and the rest of your problems should be solved for you. Keep in mind that, since OLEJA is commercialized, it's been debugged a lot (as the author has stated in mailing lists) and that means Njawin could have some unexpected problems. In this case you should thoroughly test your usage of Njawin with your application to be sure it runs well in your environment. Errors that could potentially crash your JVM may appear when certain functionality (especially multi-threaded functionality) inside your ActiveX control is executed.
Regards
Sean McNamara

Switching from PC - Have a few questions

I have read the forums and talked to AppleCare support and I have a few questions on the Mac Pro.
1. I was told by Apple that using RAM other than the overpriced "Apple" brand would void the warranty (I typically use matched Mushkin or Crucial)- is there any point in getting the AppleCare insurance then?
2. Appple told me that Western Digital Raptor 10,000 RPM HD's were not supported, yet I see a number of you use this drive - are you using a SATA adapter or putting it one of the 4 drive bays?
3. Am I limited to Apple's Superdrive DVD/CD or will any ATAPI drive work?
4. The graphics card situation is pathetic - does anyone know is there are planned updates before I spend $700 on 2 ATI 1900's to run 2 30" Cinema displays. Does Apple typically come out with new products at the same time each year?
5. Does anyone know of software to control multiple monitors i.e. Designate virtual desktops on a specific monitor, or specify that Application A opens on monitor 1 while Application B opens on monitor 2?
Any help will be appreciated - Apple doesn't seem to be very forthcoming on these topics - I am still anxious to rid myself of the virus a day problem and Microsoft software that becomes slower and less productive with every revision.

1. I was told by Apple that using RAM other than the overpriced "Apple" brand would void the warranty (I typically use matched Mushkin or Crucial)- is there any point in getting the AppleCare insurance then?
It won't void the warrantee (unless you damage the computer when installing it), but it won't be covered. If it goes for service, remove the non-Apple memory first (it's a good idea to do that first, anyway, to see if it fixes the problem).
2. Appple told me that Western Digital Raptor 10,000 RPM HD's were not supported, yet I see a number of you use this drive - are you using a SATA adapter or putting it one of the 4 drive bays?
Same as above.
3. Am I limited to Apple's Superdrive DVD/CD or will any ATAPI drive work?
No. Most ATA (or SATA) optical drives will work.
5. Does anyone know of software to control multiple monitors i.e. Designate virtual desktops on a specific monitor, or specify that Application A opens on monitor 1 while Application B opens on monitor 2?
Many application remember the last monitor they used. Some (e.g. Graphics Converter) have preference settings to put the main window on one display, the controls on the other. Some (e.g QuickTime Player, VLC have view settings to put the full screen output on a selected monitor.

HT5577 why i have some security question that i never seen before?

I tried to change my password on apple id and i got some security questions that i never seen before..what can i do in this case?please help me

Welcome to the Apple Community Helen.
If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Have some quick questions

So I have a few questions, been searching online and cannot find answers:
1.) Do emails count against the 1 GB limit or do they have another limit?
2.) Can you add on the alacarte items i.e. more users, storage, emails, etc to any plan or just the webcommerce plan?
3.) Does anyone have an example of a fully customised forum using business catalyst? I see the standard one and know you can customize but I want to see what is capable. links?
Thanks,
Jason

Hey JasonAlanV,
1. Each individual email account has a 5gb mailbox storage limit. This is separate to your site's disk space.
2. You can extras to any site. The Partner User will have to do this through the Partner Portal. Additional information can be found in our FAQ located here under "What extras can I add to a site?": http://www.adobe.com/au/products/business-catalyst/faq.edu.html
3. I'll leave this point open to the community for their examples. However, I recommend you refer to our Showcase located here: http://www.businesscatalyst.com/showcase

Before I buy an RV220W, I have some preliminary questions...

I'm in the process of moving and relocating services from Provider-A (DSL) to Provider-B (Cable). The new location isn't serviced by Provider-A (or any other DSL provider in the area), so I'm left with the only Cable Internet provider in the area. It's a much more costly option, and leaves me with less functionality, but unfortunately, it's all there is.
My DSL provider has given me a router that provides firewall, router, filter, etc. capabilities, and this allows me to secure machines on the LAN side, as well as pinhole those machines through the router to expose them to the outside world, via a static IP block I've leased from them.
When I move to cable, I'll lose the router and firewall, and be left with a 'dumb' cable modem device, capable of... well, not much.
So I need to toss my unmanaged switches, and buy a firewall, router and managed switch. Herein lies the questions.
First, here's my thoughts, given the current infrastructure at my location:
The RV220W has 4 LAN ports on the back, and a WAN port, so I'm thinking that the configuration would look like this:
{{Internet}} => Cable modem (configured with WAN IP from provider) => RV220W => GS724T-300 managed switch => [LAN hosts]
In this configuration, the LAN side of the cable modem will plug into the back of the RV220W (LAN1), and then the RV220W will feed the switch (LAN2), which all internal LAN hosts would then be physically cabled to.
On the LAN side, I have an ESX server with a few dozen VMs on it, some wireless equipment (printer, laptops, etc.) and a few wired devices (microcell, NAS storage device and similar).
The LAN devices are on 192.168.x.x and 10.0.x.x, and are all working great. The current router pinholes from its public static address (completely separate range from my leased static block) to hosts on the ESX side.
Can I configure the RV220W to permit incoming traffic on various (custom, named) ports to pinhole their way into the hosts on the ESX side? Some of these hosts will have internal 192.x or 10.x addresses, while others will be mapped to Internet-accessible static IP addresses.
How many hosts can I run behind the RV220W, before it "runs out" of either configuration values (max # of port mappings?) or before it runs out of bandwidth to service those hosts behind it?
What else do I need to consider here, so I can keep some hosts on the LAN side protected, and other hosts exposed on a service-by-service or port-by-port basis?
I'm confident this is the right configuration, I just wanted to be sure before I go making an expensive mistake with new kit.
Thanks in advance!

Dear David,
Thank you for reaching the Small Business Support Community.
The RV220W features Port Address Translation (PAT), Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT. I could not find any documentation with the maximum number of NAT entries allowed therefore I suggest you to contact the Small Business Support directly;
https://supportforums.cisco.com/community/netpro/small-business/sbcountrysupport
Just in case below I include the RV220W admin guide in case you would like to know how to go about PAT or NAT settings among all router capabilities and features configurations;
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/administration/guide/rv220w_admin_v1.0.1.0.pdf
Please do not hesitate to reach me back if there is anything I may assist you with in the meantime. Thank you for your time and patience.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

New to Editing and Have Some Important Questions

Greetings All,
I would consider myself a new editor - only because I feel I have so much to learn. Currently I edit for a local television show that broadcast on a cable network - I have been using makeshift solutions to get the job done - but would like to move into being a total professional.
Currently I have - Final Cut Studio 2 (will be upgrading to the new release in approx. 2 weeks) - 8 Core Mac Pro (upgraded video card & and extra ram)
- 23 inch Display (will purchase an additional 30" HD Display in approx. 2 weeks) -Mac Book Pro
-Adobe After Effects
I know that I need some sort of deck that can be used to put the tapes in and log and capture into final cut pro - (currently I rec. the footage on dvd and use MPEG to import the footage into Final Cut) - any recommendations on the type of deck I should get - something affordable that is universal that can be used with many types of tapes. Also I have been told that I may need a broadcast monitor - I've also been told that if I get the 30" HD display that I won't need a broadcast monitor- thoughts on this please? As a side not I have a 32 inch 720p flat screen Samsung television could this be used as a monitor? I've heard some discussion about Konika video capture card - after researching I'm still not sure I understand exactly what it's purpose is? Please help - is this something that I will need? What am I missing in my workflow? Any suggestions or advice would be appreciated - thanks

only because I feel I have so much to learn<</div>
Including where to post. This here's the LiveType forum.
You don't need one deck, you need a deck specific to every kind of tape you have to use. You probably only need a DVCAM deck. If you need Beta you already know that. If you don't know that, you need to start with a basic video production class at a college or high school. That's not a service we provide here in these forums.
The 30" Apple Cinema is way more screen than you need for FCP. Save your money and just get another 23".
Konica does not make capture cards. You may be thinking of Kona, easily researched.
You may or may not need a broadcast monitor. What you need is the firm knowledge and experience to make that decision on your own.
My suggestion is to look up a video expert in your market area and prepare your management to pay them for their expertise as a consultant. Your post indicates you have way too much to learn. You can do it in books and in many hours of online research but you're going to spend more time and money doing that than you would simply by hiring someone to do the easy parts for you.
bogiesan

Some general questions about java

Hi,
I am a beginner with java and actually i am new to programming as such. i want to ask certain questions.
I read in The Java Tutorial that java is both a 'compiled' and an 'interpreted' language while most languages fall in either one of the two categories. What is the difference between a compiled and an interpreted language?
All the java programs that we right are compiled by the java compiler. So in what language was this java compiler and java VM written
What is the definition of native code. Does it depend on the operating system ? If so, is it defined by the operating system ? If I am not mistaken, an OS in itself is a huge program, so which language can be used to create an OS. For instance, can an expert in java create his own OS using the java programming language ?
These questions may sound silly but I need to know the answers

Okay, a compiled language is completely translated into object code (one and zeroes, usually) before it is run. An interpreted language is turned into object code as it runs. The object code for most languages is the ones and zeroes that make sense to the processor. The object code for Java is Java bytecode.
Java bytecode is a set of universal commands that make sense to any Java Runtime Environment (JRE or Java Virtual Machine JVM. I think they're the same thing, someone correct me if I'm wrong,). The JRE is an interpreter. Each JRE is specific to the platform, that is; there's a Windows JRE and a Solaris JRE and yada yada. The JRE interprets the bytecode commands and turns them into commands for the platform. For instance, a bytecode command is something like, "draw a window" and the JRE turns this into the Windows or Solaris command that draws a window.
I don't know what language Java was written in. It may not all be written in one language. It's very possible that the Java compiler (javac) and the java interpreter (the JRE) are written in entirely different languages. I'd suspect the answer to this can be found in van der Linden's "Just Java" book.
Native code, in Java, usually refers to legacy code, existing code written in whatever language that you wish to use in a Java program. Maybe the native code costs too much to convert; maybe it works really well, maybe it does soemthing special, whatever -- you want to use it so you use the native command in a Java program to tell Java to run this piece of code in whatever language. Native code doesn't really have anything to do with the OS other than it's code that runs on the OS you want the Java program to run on.
An OS can be written in anything you want, but some languages are better than others. I think the Mac OS is/was mostly Pascal. Wasn't C invented in order to write Unix?

Some general questions about swing

Hi,
I used to do some swing development couple years back but since then I have been more involved in the j2ee scene. I have lost some touch and was wondering if some of my questions can be answered. I'd appreciate every effort.
First of all, I am trying to make an applet that can be used to upload multiple pics at the same time. Similar idea to facebook picture upload applet. My Q's are
-> can every swing application be turned into an applet? or when the developer starts writing an application he should write it from an applet POV
-> I noticed that the applet on facebook looks a lot like a window application. icons and the look and feel of the application is not that of a applets i saw couple years ago with sun java look and feel, how can this be achieved? is there some small example?
-> can someone suggest an example || tutorial of an applet that shows how to upload an image to the server?
and lastly for mental satisfaction :)
-> how hard do you think it is to build such an application. I assume it will just have a JTree on the left side and on right side it will show contents of the folder that is currently clicked.
Thanks for your time

thanks for the tutorial link.
However, the tutorial explains how to show icons from images. But what about in my case when the images arent even on the server yet.
Basically when the user is browsing files and gets to their my pics folder on the right side i want to show icons of images in that folder. for this reason i doubt I will be able to use what they've implemented in that tutorial. As the pics havnt yet been uploaded by the user i have no direct access to the images.

Some general questions about Sun Java Communications Suite

Hello Everybody,
We are a small group of individuals (2 Java developers and 1 Linux expert and Web Application developer), located in Germany.
We are fully new to �Solaris� and Sun Java Communications Suite and know, that it�s a highly professional software system for large scale deployment. However we plan to install (64 Bit version) and manage it in a small network environment, consisting of a Server (4 GB RAM, RAID 5, AMD Dual CPU) based on Solaris 10 (X86) and *20* clients based on Win XP, Solaris and Linux.
It�s a network of a non-profit organization, providing social services to local society.
At clients we will use the Communications Express and the needed services are: Calander, Mail and Address book. (no need of Outlook Connector, Instant Messaging, Document Management, etc.)
Our long-term aim is - after learning of professional architecting, deployment and management of Communications Suite - to provide integration and development services to organizations (schools and small / medium sized Business) and public in cooperation with ISP or infrastructure-providers like Sun Microsystems.
Now, our main questions are:
*1.-* Is the Server phy. recourse enough to deliver the mentioned services of Communication Suite to 20 clients without problems?
*2.-* Isn�t Communications Suite oversized for such small network mentioned above or better, if we use another collaboration software system like Opengroupeware (http://opengroupware.org/) ? Opengroupeware is developed using non-java lang and therefore doesn�t match our strategy.
*3.-* Does the Communications Suite download-pack includes all necessary components of Sun Java ES (Directory Server, Access Manager, etc.) or these components are to be downloaded separately?
*4.-* What is the difference between the Sun Java System Messaging Server and the Sun Java System Message Queue?
We appropriate very much your answers and any further useful information regarding our project.
Thanks
Asghar

1> I believe your hardware can support 20 users (you might need to tune the Web Server heap size) - I had a Sparc 2x450mhz w/ 2GB of ram supporting 50+ users quite comfortably - with roughly half using POP and the other half IMAP/webmail. Ideally though, for best performance you would want to break up the main servers (LDAP, WEB, and MS) between hosts) - probably not necessary for 20 users. Having all on one machine simplifies things too (but also makes it a single-point-of-failure). Your disk obviously is important, the faster the better - that it's redundant is also nice - larger deployments might use much fancier storage systems to provide speed and redundancy, and use an the App Server instead of the Web Server as a container for Comms Express.
2> I don't think it's "oversized" - might you mean overkill? In this case I don't think overkill is a bad thing. Why not have very capable software, even if you don't really need it -is how I see things.
3> I believe you get all you need in the download. Though I've never tried the 64bit version (which I am guessing is only really necessary for larger deployments where you want to obtain maximized performance for heavier loads). I recommend following the single host evaluation document to get the hang of the install.
4> I'm not sure - though the Messaging install I believe requires the MQueue stuff, I think it's sort of an API for messaging, also available separately, but used by JES Messaging system?
Good Luck,
s7

Some General questions - Need answers very soon...Pls help

Hello Gurus,
I have following questions. Could you please answer those if possible? I really need to know soon. I am BO developer but not working on Admin side and need to clarify some questions below.
1 )What is a domain? How many are there in a basic set up? What are they?
2) When is the repository created?
3) Can we have multiple domains? If yes, what is the purpose of having them?
4) How do you create a user?
Thanks.

Hello,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Thinking of switching to FIOS - Have some general questions:

Similar Messages

Maybe you are looking for