Thinking of upgrading camera but with different fps: problems?

Working with PrePro and After Effects CS6
I have a Panasonic HDC SD90 which is a low end 1080p camera shooting at 59.97 fps. It is very shaky to Zoom and the light meter is not stable and gives me fluctuating exposure levels. Costco has a sale on this:
The JVC GC-PX100 is a premium camcorder in a digital SLR-style format.
http://www.trustedreviews.com/jvc-gc-px100_Camcorder_review
The MOV format provides the highest quality, offering a 40Mbits/sec data rate for Full HD at 50 progressive frames per second, with 4Mbits/sec of this used by the LPCM audio. You can grab the same resolution and frame rate in MP4 format at 36Mbits/sec, while AVHD only offers this at 28Mbits/sec, which is the standard for AVCHD 2.0. The iFrame option is 720p at 25 frames per second and a healthy 36Mbits/sec.
Read more at http://www.trustedreviews.com/jvc-gc-px100_Camcorder_review#i6Ya0K3bd7eatHE6.99
What challenges in PrPro and AE might I face using footage from both? If I want to set up multi cameras on a shoot am I begging for trouble by continuing to use the Panasonic or by buying a camera that is not 59.97 fps.
thanks in advance for any input.
jeff

Ahh, Mr. JeffinPoulsbo, you're probably about 4 hours up I5 north of me. Not too many Poulsbo's I know of state-side!
Past the items with this specific PAL camera, mixing frame-rates on a sequence is (to qoute a line from a fav movie) "possible but not recommended" ... at least, if you can avoid it. There can be image-quality issues with the transcoding as the computer will need to create frames by sort of guessing and in the process you can loose all sorts of IQ bits. You really need to pick one of the formats as your base timeline framerate and typically transcode the other before adding it to the timeline for editing purposes ... and so yes, it can be done; yes, it's done more often than you might think; no, it's not hardly ever the optimal choice.
PrPro can do its own t-code thing if you drop non-conforming footage on the tl and in the pop-up that normally pops-up click on conform that footage to the timeline. I've heard some folks say it works fine for X footage on a Y timeline, and others say ... you're nuts ... my one caveat: You Mileage WILL vary. So you'll have to try it whatever you come up with.
Neil

Similar Messages

I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already login with my own Apple ID.

I need to update my apps in the App Store, but when i try to update, the Sign Up Apple ID pop up box came out with different Apple ID. How can I change it to mine? My iTunes Store already log in with my own Apple ID.

Just now you said the other Apple ID stored inside it, is that mean all my data back up in that the other ID?

How to sync two IPhone with one PC , but with different applications

How to sync two IPhone with one PC , but with different applications ?
We have two IPhones , but one PC , we want to sync separately , is that possible ?

Absolutely, connect each phone, select what content you want on each phone, then hit the sync button. iTunes will keep everything straight, by device, upon subsequent syncs, including separate backups.

Ability to process several raw files with the same content but with different exposure into the single picture

Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
Base raw files can be given with exposure bracketing during shooting, for example.
The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
Thank you

The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Unable to upgrade Camera Raw with CS4 in Lion...

Hi All,
very frustrating; I have been unable to upgrade Camera Raw despite several attempts.
I've downloaded the latest version as an upgrade; I've done Software upgrades through PhotoShop, but for some
reason these do not seem to have taken, ie., the version of ACR in Bridge preferences remains 5.0.
This makes it impossible for the computer (a brand new MacBook Pro) to read or convert to DNG raw files
from a Nikon D300S.
Oddly, ACR 5.0 converts raw files from a D700 just fine.
Also puzzling is that my attempt to upgrade to ACR 5.7 in a 5 month old iMac have been smooth as silk (OS 10.6.7)
Help!
Stu Rosner

At one point, I was one of the most vocal critics of camera raw in the CS4 / Lightroom v2 days. In short, I felt that there was not enough control over noise reduction and fine detail rendition when processing digital camera raw files, especially at higher ISOs, although I had been quite pleased with earlier versions. That all changed when CS5 / LR v3 was released. You now have an enormous amount of control over exactly how much sharpening and how much noise reduction will be applied to an image. The amount of fine detail one can extract from a low-ISO raw file is extraordinary. When you crank up the ISO and an image gets noisy, you now can choose whether or not you prefer a smoother look at the expense of some of the more subtle texture details, or a slightly grainier look where one has a feeling that no significant fine details are lost from the original capture (what I prefer). The raw processing defaults in Adobe's latest software are good starting points, but for my personal tastes, I generally do modify them a bit with less NR and slightly more sharpening at a smaller radius.
Even out-of-camera JPEG files will benefit from the new processing engine. I find that turning down the sharpening and NR in-camera, and then applying some subtle tweaking in LR, for example, makes for much better looking images even when starting from a JPEG. If you are a raw shooter, like I am, then upgrading to the latest Photoshop and Lightroom is absolutely 100% worthwhile in my opinion!
I personally feel that the quality of raw conversions in Adobe's latest software are pretty much the best there are. I have used many other raw converters (Capture One, Aperture, RAW Developer, Silky Pix, Canon's DPP etc.), and while each have their strengths, overall I far prefer the look of the final image from Adobe's latest software. Sure, I might find the colour rendition slightly better, in some cases, from some other raw converters, but colour I can fix. Poor detail rendition or heavy-handed/crude noise reduction I cannot.
EDIT: Also should mention how good the lens correction controls are. Not only are there automatic lens corrections available (possibly of limited use with an M8 due to potential lack of lens EXIF information), but the manual corrections are extremely useful. Chromatic aberration, vignetting, highlight fringing and distortion control all work extremely well and are minimally harmful to image quality, unlike performing those same corrections in Photoshop after the raw conversion stage. You also have excellent perspective corrections that, amazingly enough, seem to have very little impact on image quality even when fairly dramatic adjustments are made.
Lastly, I own both Noise Ninja and Topaz DeNoise and since upgrading to Adobe's latest software, I don't think I have felt the need to use either of those two third party NR plugins once. Purely from a noise reduction standpoint, upgrading to CS5 or LR v3 is almost like getting a new camera, almost like moving from a cropped sensor to a full-frame as far as high-ISO image quality.
I would suggest you download Lightroom v3 and give the 30 trial version a whirl. Spend some time in the Detail section of the Develop module and make sure that for each image you are looking at, ones that you may have edited in previous versions of Camera Raw or Lightroom, that you have "2010(Current)" chosen in the "Process:" section of the CameraCalibration tab in Develop. That will ensure that you are fully benefitting from the latest raw conversion engine. Zoom in to 100% before you tweak the Detail settings to make sure you are seeing actual pixel-level detail. I think you may be amazed at what you can do...
Regards,
Mike Mander

Project stock exist in a plant and WBS but with different company code

Hello,
As I know I can not create a PO in company A, but was assigned to a WBS maintained in company code B. The system will check if the WBS getting the same company code with the PO, and pop up the error message if the company code was differect.
But seems the project stock could exists in a plant but assign to WBS was maintained with different company code. For example, A material stock was in plant A assigned to company code A, and it is also assigned to WBS belong to company code B.
Any one know it is correct?
Thanks!

I knew crossing company code to assign WBS element to PO is not allowed since i got the error message, and I think it's reasonable, cause the expense from the project PO should post to the same company code through the WBS element.
But why for the inventory crossing company code is allowed? The stock in plant A belong to company code A, was assigned to WBS element B belong to company code B. That means the inventory is in the GL balance of company A but under the profit center belong to company B. How to understand it? I think it's wrong

New Macbook pro retina but with different keyboard ?

Can I buy the new macbook pro retina 13' in HK but with a French keyboard ? I don't find the option online.. thanks!

No computer is fault free but Apple MBPs have a good track record. In those cases where problems do arise, Apple has the best support in the industry.
A MBP with 4 GB RAM with the SSD storage should be adequate for your needs.
lsmoondancer01 wrote:
P.s. On Apple's site I found a refurbished late 2013 model of the MacBook Pro Retina 13 with all of the same specs as listed above (4GB, not 8GB), running OS X (doesn't say which one) but for a bit less than a brand new one. Is this the same model as what they're currently selling new in their store or did they just upgrade everything to match what is being offered in the current "new" model?
The latest MBP models came out in October 2013, so it will be the same, with the same warranty and telephone support. The difference will be that the price will be less and it will be delivered in a plain white box.
I have purchased three MBPs from the refurbished section. I have never been able to detect any cosmetic differences and will go that route again.
Ciao.

Have original iPad and just got iPad2 in same household with same email ID but with different interests. How can we share purchased items, email and yet keep our own separate interests?

We have iPad and ipad2 with one email address but two owners. How can we share purchases, receive same email messages but have individual accounts at the same time? Can we have same Apple User ID with different passwords? Hepl!

Aside from the fact that we have hijacked this thread - which we really shouldn't do - you would probably be better off posting questions or seeking advice in the iCloud portion of the Apple Support Communities. I'm sure that there are a lot of more experienced iCloud users on that site than I am.
I'm not a big believer in iCloud at this point, so my experience with it - other than downloading past purchases - is really pretty limited. I would not want to steer you down the wrong path.
However, here is the Apple iCloud support website that is loaded with all sorts of information and links to even more information. This will get you started anyway ....
http://www.apple.com/support/icloud/

How can I access a response file on the same computer but with different login?

When trying to access a response file on the same computer that was used to set it up, but with a different login, I get an error message that the network resource was not found. How can I retrieve the responses on the same computer but under a different login/username?

The response file is associated with a specific login (as determined under Edit > Preferences > Identity) so you cannot retrieve it if you're using a different login.

Two ODSs share the same InfoSource but with different updata mode load?

We've got two different ODSs (ODS1 and ODS2) for two respective clients (client 1 and client 2). Client 1 has already going alive and in the InfoPackage, we only pick up ODS1 (Client 1) as feeding target and we have conducted initial load and several times of Delta loads for ODS1 (data load daily). But now we are going to start to load data to ODS2 (Client 2) and at the same time we will have to continue our delta load to ODS1.
It could not be possible that the two ODSs will be feeded data with different pace (ODS1: continue delta load, ODS2: initial load) if they share the same InfoSource. Then what's the best way to resolve this issue?
Thanks

hi Pradip,
Tell you a bad news that the solution doesn't work on two of the EBP (a source system which is similar to R3, we've got 4 EBP ODS/InfoSources, but two of the four don't work with the last step listed below) ODSs/InfoSources. The steps I took on production are:
1. Conduct Full Repair data load to ODS2;
2. Delete init option of ODS1 from Scheduler menu;
3. Run Init without data transfer to set delta pointer for both ODS1 and ODS2.
But the last step to run Init without data transfer has taken 1 whole day and eventually becomes red since it takes so long time to set delta pointer.
When I said our solution worked is that I conducted the test on our GL ODS and the Init without data transfer took about 1 hour to finish.
Also when we conduct the last step to do the Init without data transfer to click Start button to set pointer, a msg box titled "Activate ODS Data" pops up saying that "No requests have been selected for activation. Do you want to make a selection, or activate all the requests?" with buttons "Activate all requests", "Select requests" and "Cancel". If clicking the button "Select requests", another msg box pops up to prompt to input a Date range, we didn't input any date range, just click continue, then the Init without data transfer will run forever!
Thank
Message was edited by: Kevin Smith

Several layered effects of the same kind but with different adjustments for the same layer

Hi,
I wonder if it there is an easy way to have several different instances of e.g. glow or bevel and emboss on the same layer.
I know I can achieve this by using smart objects or a duplicate layer with zero blending.
I just wondered if there is a way to do this directly in the layer effects.

Hi emil emil,
thx for your answer!
I wasn't even refering to different objects on the same layer, btw. it would be enough if I was able to layer e.g. different bevel and emboss on top of each other (With different colors, softness and size.) But I guess the answer remains the same.

Running total required but with different timing

Hi All:
I am using Oracle9i Enterprise Edition Release 9.2.0.6.0
I want to write a query to display the statistics report with running total.
I have written following query that return last 60 minutes activities.
SELECT se.tserv_id,
sum(decode(eu.category,'I',1,0)) Imp,
sum(decode(eu.category,'E',1,0)) Exp,
count(*) Total
FROM service_events se, equipment_uses eu
WHERE se.performed BETWEEN trunc(sysdate-60/1440,'mi')
AND trunc(sysdate,'mi')
AND se.tserv_id IN ('EXM','GROUNDED')
AND eu.gkey = se.equse_gkey
AND eu.category IN ('I','E')
GROUP BY se.tserv_id;
now I want to write a query that shows me the result of above query and running total as well
But the different between current activity and running total is as follows
Current Activity = Last 60 minutes activity
Running Total = Total activities from the 08:00 am till sysdate.
for example if this query executed on 11:00 am then the current activity values must be from 10:00 am to 11:00 am and the running total values must be from 08:00 am to 11:00 am
The reason for running total starts at 08:00 am is that the shift starts from 08:00 am to next day 07:59 am.
Can I write one single query for this?
Similarly running total values must be start from last day 08:00 am to current date and time when I executed this query from 00:00 to 08:00 (12 midnight to 8am)
if difficult then plz let me know that how can I find that if the time is from 00 hrs to 08 hrs then start time must be the last date 08:00 am to the current date and time.
Thanks
Hassan

Dear Frnak
Thanks for your reply and help
Its really did what I want
I mean to say that the result format is correct but the value of Total_day column is not correct.
Following is the sample data from 19-Jun-2008 08:00 AM to 20-JUN-2008 08:00 AM
TSERV_ID EQUSE_GKEY     PERFORMED
===============================================
EXM       5188958     19-Jun-2008 8:00:32 AM
EXM       5185586     19-Jun-2008 9:03:34 AM
EXM       5181960     19-Jun-2008 9:03:35 AM
EXM       5173333     19-Jun-2008 9:03:35 AM
EXM       5188263     19-Jun-2008 9:08:49 AM
GROUNDED 5174055     19-Jun-2008 9:10:29 AM
GROUNDED 5152887     19-Jun-2008 9:10:29 AM
GROUNDED 5187512     19-Jun-2008 9:10:29 AM
GROUNDED 5196303     19-Jun-2008 9:27:41 AM
EXM       5196370     19-Jun-2008 9:29:50 AM
EXM       5172045     19-Jun-2008 10:01:23 AM
GROUNDED 5196269     19-Jun-2008 11:11:29 AM
GROUNDED 5200219     19-Jun-2008 11:24:39 AM
GROUNDED 5185246     19-Jun-2008 12:06:30 PM
GROUNDED 5190134     19-Jun-2008 12:09:27 PM
GROUNDED 5190475     19-Jun-2008 12:09:27 PM
GROUNDED 5156065     19-Jun-2008 12:26:49 PM
GROUNDED 5132287     19-Jun-2008 1:56:44 PM
EXM       5189203     19-Jun-2008 2:29:17 PM
EXM       5180158     19-Jun-2008 3:27:03 PM
EXM       5149310     19-Jun-2008 3:37:31 PM
EXM       5196303     19-Jun-2008 3:42:48 PM
EXM       5192768     19-Jun-2008 4:03:51 PM
EXM       5174055     19-Jun-2008 4:14:23 PM
EXM       5200231     19-Jun-2008 4:45:51 PM
EXM       5157151     19-Jun-2008 4:51:06 PM
EXM       5159930     19-Jun-2008 5:01:36 PM
EXM       5185237     19-Jun-2008 5:01:37 PM
EXM       5195434     19-Jun-2008 5:01:37 PM
EXM       5152887     19-Jun-2008 5:06:49 PM
EXM       5196269     19-Jun-2008 5:06:49 PM
EXM       5187512     19-Jun-2008 5:17:26 PM
EXM       5190134     19-Jun-2008 5:59:24 PM
GROUNDED 5101919     19-Jun-2008 6:44:36 PM
GROUNDED 5101918     19-Jun-2008 6:44:37 PM
GROUNDED 5101913     19-Jun-2008 6:44:37 PM
EXM       5185735     19-Jun-2008 6:46:38 PM
GROUNDED 5195475     19-Jun-2008 6:47:11 PM
GROUNDED 5195361     19-Jun-2008 6:47:12 PM
EXM       5132608     19-Jun-2008 7:02:23 PM
GROUNDED 5195334     19-Jun-2008 7:10:32 PM
GROUNDED 5190558     19-Jun-2008 7:10:32 PM
EXM       5183029     19-Jun-2008 7:33:53 PM
EXM       5183480     19-Jun-2008 7:39:12 PM
EXM       5189566     19-Jun-2008 8:00:11 PM
EXM       5181825     19-Jun-2008 8:15:57 PM
EXM       5183537     19-Jun-2008 8:15:57 PM
EXM       5180210     19-Jun-2008 9:08:27 PM
GROUNDED 5193136     19-Jun-2008 9:58:23 PM
EXM       5171510     19-Jun-2008 10:21:59 PM
EXM       5185615     19-Jun-2008 10:48:14 PM
EXM       5184737     19-Jun-2008 10:53:29 PM
EXM       5195475     19-Jun-2008 11:51:16 PM
EXM       5195476     20-Jun-2008 12:01:46 AM
EXM       5190558     20-Jun-2008 12:12:17 AM
EXM       5196473     20-Jun-2008 12:54:19 AM
EXM       5183204     20-Jun-2008 1:20:34 AM
GROUNDED 5192844     20-Jun-2008 1:28:24 AM
GROUNDED 5174238     20-Jun-2008 1:28:24 AM
GROUNDED 5193127     20-Jun-2008 1:28:24 AM
GROUNDED 5185794     20-Jun-2008 1:29:09 AM
GROUNDED 5192895     20-Jun-2008 3:04:23 AM
GROUNDED 5193039     20-Jun-2008 3:04:23 AM
GROUNDED 5195447     20-Jun-2008 3:04:23 AM
GROUNDED 5190228     20-Jun-2008 3:04:24 AM
GROUNDED 5179370     20-Jun-2008 3:04:24 AM
GROUNDED 5190289     20-Jun-2008 3:04:24 AM
GROUNDED 5174065     20-Jun-2008 3:04:24 AM
GROUNDED 5192862     20-Jun-2008 5:04:42 AM
GROUNDED 5199903     20-Jun-2008 5:04:42 AM
EXM       5178176     20-Jun-2008 6:30:29 AM
EXM       5185161     20-Jun-2008 6:46:14 AM
EXM       5180226     20-Jun-2008 6:46:14 AM
GROUNDED 5202026     20-Jun-2008 7:03:14 AM
EXM       5101912     20-Jun-2008 7:07:14 AM
GROUNDED 5176763     20-Jun-2008 7:25:27 AM
GROUNDED 5185494     20-Jun-2008 7:25:27 AM
EXM       5185295     20-Jun-2008 7:38:46 AM
EXM       5173837     20-Jun-2008 7:49:15 AM
GKEY     CATEGORY
=================
5101912     I
5101913     I
5101918     I
5101919     I
5132287     I
5132608     I
5149310     I
5152887     I
5156065     I
5157151     I
5159930     I
5171510     I
5172045     I
5173333     I
5173837     I
5174055     I
5174065     I
5174238     I
5176763     I
5178176     I
5179370     I
5180158     I
5180210     I
5180226     I
5181825     I
5181960     I
5183029     I
5183204     I
5183480     I
5183537     I
5184737     I
5185161     I
5185237     I
5185246     I
5185295     I
5185494     I
5185586     I
5185615     I
5185735     I
5185794     I
5187512     I
5188263     I
5188958     I
5189203     I
5189566     I
5190134     I
5190228     I
5190289     I
5190475     I
5190558     I
5192768     I
5192844     I
5192862     I
5192895     I
5193039     I
5193127     I
5193136     I
5195334     I
5195361     I
5195434     I
5195447     I
5195475     I
5195476     I
5196269     I
5196303     I
5196370     I
5196473     I
5199903     I
5200219     E
5200231     E
5202026     EAnd I used the same query suggested by you.
WITH     s     AS(
SELECT     se.tserv_id     ,     eu.category     ,
           CASE
           WHEN     se.performed     BETWEEN
                                to_date('&target_dt','DD-MON-RRRR HH24:MI') - (1/24)
                              AND     to_date('&target_dt','DD-MON-RRRR HH24:MI')
                      THEN     1
          ELSE     0
          END     AS in_hour     ,
        CASE
          WHEN     TRUNC (se.performed - (8/24)) =     TRUNC (to_date('&target_dt','DD-MON-RRRR HH24:MI')
                                                 - (8/24))
            THEN     1
          ELSE     0
          END     AS in_day
FROM     service_events     se     ,     equipment_uses     eu
WHERE     eu.gkey          = se.equse_gkey
     AND     eu.category     IN ('I', 'E')
AND se.tserv_id in ('EXM','GROUNDED')
SELECT     tserv_id,
        SUM (DECODE (category, 'I', in_hour))     AS imp_hour,
        SUM (DECODE (category, 'E', in_hour))     AS exp_hour,
        SUM (in_hour)     AS total_hour,
        SUM (in_day)     AS total_day
FROM     s
GROUP BY     tserv_idNow you have the sample data for almost 24 hours
Let me clear it again
When I executed this query at 20-JUN-2008 09:00 AM it gives me following result (that is accurate)
TSERV_ID IMP_HOUR EXP_HOUR TOTAL_HOUR TOTAL_DAY
EXM        2         0           2               3
GROUNDED   1         0           1               8When I executed this query between 20-JUN-2008 00:00 to 20-JUN-2008 08:00
then system must show the Total_Day value from 19-JUN-2008 08:00 to current date and time. e.g
I executed this query at 20-JUN-2008 06:00 AM it gives me following result:
TSERV_ID IMP_HOUR EXP_HOUR TOTAL_HOUR TOTAL_DAY
EXM             0     0     0        44
GROUNDED     2     0     2        35Now here you can see that the value of Total_Day is not as accurate as I required:
EXM = 44 and GROUNDED = 35
these values are between 19-JUN-2008 00:00 to 20-JUN-2008 06:00 (that is wrong in my case)
The values of total_day should be as follows as 8 hours from 00:00 to 07:59 AM fall in the shift of 18-JUN-2008 not in 19-JUN-2008
From 19-JUN-2008 08:00 to 20-JUN-2008 06:00
EXM: 38
GROUNDED: 32
Plz note that this result is required because in our company the shift starts from 08:00 AM and ends 07:59 AM next day
I hope you will be more clear now and there is no confusion anymore.
Plz let me know if you still confused.
Brgs,

I need to reinstall osx on my mac but with different apple id ?

hey,
i need to resinstall osx on my macbook but with a different apple id than the one which i used to install mountain lion is there any way i can do it ?

Welcome to Apple Support Communities
Unless you purchased OS X Mountain Lion with that Apple ID, you can't. You have to use the Apple ID used to purchase OS X Mountain Lion, or you won't be able to install Mac OS X

What is best practice for multi camera edit with differing lengths?

I have three cameras that took video of an engagement party. Camera A and B took it all (with some early extra material exclusive to each camera). Camera C took some, then stopped, then took more.
So I have four sets of clips - A and B which are complete, then C then D.
Should I create sequence 1 with A, B and C synchonised, then create sequence 2 with A, B and D synchronised, then sequence 3 with sundry early non-multi camera clips, plus sequence 1 plus sequence 2 then late non-multi camera clips?
Or can I synchronise A, B and C, then on the same timeline synchronise A, B and D? I'm concerned that the second synchronisation will put C out of sync.
What is the best way to approach this?
Thanks in advance.

A and B which are complete, then C then D.
I think you're looking at this in the wrong way. You have only three cameras, A, B and C, but you don't really have a D camera, as those are just other clips from camera C. You might call them C1 and C2 if you like, but calling them D seems to be confusing the issue, as it's still only three cameras, and three shots to choose from when cutting the sequence. (Except for the gap between C clips, where you will have only the A and B shots to choose.)
You can absolutely sync all the clips form camera C on the same sequence as A and B. And it will probably be easier to do so.

Thinking of upgrading camera but with different fps: problems?

Similar Messages

Maybe you are looking for