Thinkpad 8 for Windows 8.1 x64

It seems that Thinkpad 8's CPU support x64, is there any method to install x64 win8.1 on thinkpad 8.
I had tried many ways to boot from usb, and usb dvd-rom, but still not working.

Hi, the problem has been solved
I think ThinkPad 8 cannot use Windows 8.1 x64 because of its 32bits UEFI.
After tried for few days, the usb drive can boot up.
The reason for why i cannot boot from usb, because the ThinkPad 8 cannot boot from NTFS usb drive (The tools i used "http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool" can only create NTFS thumb drive), after read this post ("http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?LegacyDocID=SF13-T0008") and tried to create a bootable fat32 thumb drive, it can boot.

Similar Messages

I-tunes for Windows XP Professional x64

I tried a lot to find out i-tunes for Windows XP Professional x64 bit
but i didn't get any solution for installing i-tunes in my laptop which had Windows XP Professional x64 bit.
when i asked to other person then at last i found only one reply that,
"If i want to install i-tunes in my laptop then i has to CHANGE OPERATING SYSTEM

iTunes is a 32 bit program.
The 64 bit installer has 64 bit drivers for burning and the iPhone.
If you don't have an iPhone you should be able to install the 32 bit iTunes and then download the 64 bit Gear drivers for burning from the Gear download site:
http://www.gearsoftware.com/support/drivers.cfm
You may need to enable scripts if you are using Firefox with Noscript.
If you have an iphone and want to try to get the 64 bit installer to work here are some links that may help:
http://yukichigai.googlepages.com/iphonex64
http://pctech.invisibill.net/?page_id=36
http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/

HP ZR2740w drivers for Windows 8.1 x64

Where can I find the drivers for windows 8.1 for this monitor?
Please note that the Win7 x64 drivers are not accepted by Win8.1 x64.
Adding it as legacy hardware with the INF provided by the Win7 install program doesn't work either.
Please help! I bought these two monitors just a year ago and now they're useless already!

Hey there. I'm also looking for the same. Was there ever anything released?
Thanks!

HP LaserJet 1005 driver for Windows 8.1 x64

Hello,
I'm unable to install the HP LaserJet 1005 series driver on my Windows 8.1 x64. Here is what I've done so far:
- downloaded ljP1000_P1500-HB-pnp-win64-en.exe
- started the installer program
- it successfully extracted installation data into C:\Program Files\HP\HP LaserJet P1000_P1500 Series
- (the printer's USB cable is not yet connected)
- A pop up window appears: "Waiting for user to connect the device."
- I connect the USB cable to the computer. The printer is turned on. (The USB cable is OK - verified on a different PC)
- However, the installer is unable to detect the connected printer. The following messages are reapeatedly written into the installer's log file:
[ 4- 6-2014 14:35:21:085]- LOG(8F0): IsNewDeviceConnected(vidpidList with 6 elements)
[ 4- 6-2014 14:35:21:153]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3D17)
[ 4- 6-2014 14:35:21:220]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:287]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4817)
[ 4- 6-2014 14:35:21:354]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:423]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4917)
[ 4- 6-2014 14:35:21:492]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:559]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3E17)
[ 4- 6-2014 14:35:21:625]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:692]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_3F17)
[ 4- 6-2014 14:35:21:760]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
[ 4- 6-2014 14:35:21:828]- LOG(8F0): _GetUSBDevice(index=0, vidpid=VID_03F0&PID_4017)
[ 4- 6-2014 14:35:21:895]- LOG(8F0): _GetUSBDevice first time so GetClassDevs
- note that after connecting the printer's USB, the printer appeared in the Devices and Printers Windows view. However, when I click on Properties and Driver -> Hardware I get that no drivers have been loaded for it.
It looks like the program cannot find the connected printer it this is causing the failure. Here is a download link to the full log file: log.
I've also checked the following two threads which adress similar problems, but there is no workaround in there for my specific problem:
- HP LaserJet p1005 windows 8 driver ?
- Windows 8 driver for LaserJet P1005 printer?
Please advice on how to proceed in this situation. Please let me know if you need further information.
Best regards,
Atanas

Hello Shindov,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

64-bit SUN java for Windows 64-bit x64?

Hi
Anyone who knows if SUN has released a 64-bit version of SUN JDK 1.4.x to be used on a Windows x64 installation?
I haven't been able to find it, but SAP's PAM tells that SAP NW04s is supported for SUN JDK 1.4.2 x64 Windows!
Best regards
Tom

Hello,
I'm trying to install IDES 4.7 Retail on a 64-bit Dual XEON machine on Windows 2003 Enterprise x64.
I have used the AMD64 version of JDK 1.4.2, but I don't think it's helping. The first time I ran JDK 1.4.2.13 AMD64, the java setup threw a warning/error that the architecture is not compatible. It worked fine the next time I ran it.
MS SQL 2000 has installed itself as a 32-bit version!! And later on, SAPINST failed to install when running the file setup.cmd (from installation CD #5039652) -- it uses JAVA_HOME to detect the processor's architecture and it looks for AMD64 directory inside the installation directory, which does not exist (only I386 exists).
Questions:
1) Is XEON 64-bit compatible with IDES 4.7 Retail?
2) Is there a compatible version of JDK 1.4 for XEON 64?
3) Is it safe to use JDK 6 and will other applications/installations see the system as a 64-bit machine?
4) Do certain Windows updates/patches/hotfixes affect any of the installations?
Thank you

The selected driver is not applicable to any supported platforms. 2012 R2 U1 for Windows 8.1 x64

When trying to import the drivers from the Windows 8.1 x64 Dell E6330 SCCM CAB to our SCCM 2012 R2 U1 server, we receive the error "The selected driver is not applicable to any supported platforms" on a number of drivers.
Specifying the same source directory to the test Windows 8.1 Ent x64 computer via the install driver wizard in Device manager finds and installs the missing drivers successfully (Bluetooth 4.0 Module and STMicroelectronics 3-axis Digital Accelerometer).
The manufacturer section of those drivers looks like this:
bcbturms-win8x64-brcm.inf
[Manufacturer]
%MfgName%=Broadcom, NTamd64.6.3, NTamd64
st_accel.inf
[Manufacturer]
%STM%=ST,NTAMD64
Any idea how I can successfully import these drivers?

Thanks for the suggestion, but the results are the same. The Grabber runs without error, but the injector errors with "Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error." So I attempted to import the drivers from the
injector's configured drivers source folder and received the exact same error I receive when attempting to import them from the Dell cab.
Relavent part of the DirverInjector log below:
<![LOG[Starting drivers import processs]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.IntegrateDrivers" context="" type="1" thread="" file=""
<![LOG[Current folder : Bluetooth]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Current subfolder : Dell Wireless 380 Bluetooth 4.0 Module]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[INF file found : oem14.inf]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Driver version found : 12.0.0.7820]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Checking driver existence]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Checking driver existence]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Driver not foud, a problem occurred during the import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="2" thread="" file=""
<![LOG[End of driver is import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""

Certification for Windows 2008 R2 x64

Hi,
My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.
Is there a date for this support/availability?
Thanks,
Fernando.

My customer wants to know if OEM 11g Grid Control R1 is supported to be installed (Repository, OMS and Agents) on Windows 2008 R2 x64. Repository will be on DB 11gR2 to monitor OFMW 11gR1 components (11.1.1.3) which are running with Sun JDK 1.6 64-bits).
OMS 11G is not available for Windows 64 bit. However you can use 64 bit windows for repository databases.
Certification Matrix (Doc ID 412431.1) in My Oracle Support seems to be not updated as it does not shows OMS 11g, only OMS 10gR3 and R2 are available.Please select 11G OMS from the dropdown , certification information for 11G is also available in the note.
Is there a date for this support/availability?Please keep checking otn.oracle.com for availability.
Regards
Rajesh

ANNOUNCE: JRockit 1.4.2 support for Windows XP/2003 x64 Edition

We are happy to announce that the 32-bit version of JRockit 1.4.2 is now supported on Windows XP and 2003 x64 Edition with Intel EM64T and compatible (including AMD Opteron) hardware.
Download here:
http://commerce.bea.com/products/weblogicjrockit/1.4.2/142_05.jsp
Updated support matrix:
http://e-docs.bea.com/wljrockit/docs142/certif.html
Note that WebLogic Server 8.1 SP4 is supported on Windows 2003 x64 Edition with this version of JRockit, details here:
http://e-docs.bea.com/platform/suppconfigs/configs81/winsvr2003_em64t/81sp4.html
Henrik Stahl
Product Manager

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

JDK 1.4.2 version for Windows Server 2003/x64 on Intel Xeon 64 bit processo

Hi,
I'm currently installing a SAP Netweaver Server on a Windows Server 2003/X64 (Intel Xeon CPUs).
The server requires a JDK 64 bit with minimum version 1.4.2_09. Version 1.5.0_00 and higher are not supported by SAP.
I have searched on the J2SE 1.4.2 download page and I haven't found any windows 64 bit except for Itanium processors.
SAP mention clearly on its web portal that it supports Windows Server 2003/X64 64bit with Sun JSE 1.4.2 64 bit.
Any help?
Thanks,
adaif

Hello,
I ran into the same problem searching for the 1.4.2 JDK for Windows x64 platform and found this discussion post. It was helpful!
Could you tell me where to download the JCE policy files from? Do they need to match the same JDK version (1.4.2)?
The Install Guide for SAP NetWeaver 7.0 SR3 Java on Windows MS SQL Server says to download the JCE policy files for your platform (Windows x64) from http://java.sun.com/javase/downloads. But I could only find jce_policy-6.zip. Is that the right JCE policy files for Windows 2003 x64 64bit platform for SUN JSE 1.4.2 64bit?
Thanks,
Asif

HP 350 G1 ACPI\HPQ6007 *HPQ6007 Unknown Device Driver for Windows 7 Ultimate x64

Hi,
I have recently purchased HP 350 G1 latop and there is a missing driver in device manager under Windows 7 Ultimate x64 that I cannot find out what driver it is, could you please help identify the hardware and provide me link to the driver?
ACPI\HPQ6007
*HPQ6007
Thanks.
James
This question was solved.
View Solution.

Hi,
Download and install HP 3D DriveGuard from the following link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709431&swItemId=ob_124661_1&swEnvOid=405...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!

Suhail wrote:
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!Which PSC 1400 are you using? There a few different models: HP PSC 1402 All-in-One PrinterHP PSC 1410v All-in-One PrinterHP PSC 1410xi All-in-One PrinterHP PSC 1417 All-in-One PrinterLet me know which one so I can get you the proper download.Thanks,Sean

Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64

Hi,
from when I update my system with Windows 8 Pro I can' t use the printer Hp Deskjet 2050 J510a.
I downloaded the latest version of drivers and software for Windows 8 Pro 64 bit:
DJ2050_J510_Basicx64_1313.exe
The application give me at the and of installation the message:
"installation not completed"
and in details I can see:
"Installation error. Operative system not supported. This software can be installed only in Windows XP, Vista, Seven. Change operative system or install the printer in another computer."
The printer as been recognized from the system, and in panel control I can see it, but when I print any page the printer make only half print and than show me a message of " not original or used printer cartridges, press OK to continue or cancel do delate the print" but the print cannot be completed untill the end.
Cartridges are original; I tested the the printer too in an another computer with different operative system: the printer work correctly.
Thanks for your attention

Hello kamran554,
I understand you are looking for the driver to download for your Deskjet 2050 J510a for Windows 8 64bit.
I have located the correct driver for you to download below.
Please click the link to download and install.
HP Deskjet Full Feature Software and Drivers
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Where to get java 1.4.2 for Windows 2003 Server x64?

Hello, I am installing Netweaver 7.0 SR3 on Windows Server 2003 Standard x64 running on a Xeon 5100 which I believe is i386 64-bit. I tried to use the JDK 1.4.2 which is pointed to by sapnote 941595. However, this appears to be for AMD and will not install. SAPinst will not accept the 32-bit version of that JDK either. Could you please tell me where I can get the correct version of the JDK? Also, as an experiment I tried using the latest 64-bit version 1.6 for my machine and SAPinst got a couple stops past the ABAP import before it failed with a Java error. Is there a way to completely uninstall everything and start over? Thanks - Chris Piret

Hi,
With the links from note 941595, you cannot download release 1.4.2_13.
I had to use this link
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=j2sdk-1.4.2_13-amd64-JPR@CDS-CDS_Developer
that I got from this forum.
This JDK download is a mess and I think, we, the customers, pay or what seems to be bad relationship between SAP and SUN.
IMHO, the JDK should be included in the installation box.
I get the database software in the box, why not the JDK ?
Regards,
Olivier

Need networked printer driver for HP LJ 1022N for Windows 8.1 x64

We've had this printer setup on our Windows 2003 print server for years & now that I'm transitioning to a Windows 2012 print server & Win 8.1 clients, the only driver I'm finding is a host-based driver for usb. Is there another driver I can use on the print server for this printer? It wasn't listed in the UPD supported list nor is it in the HP list in the Add driver dialog after updating from Windows Updates. I appreciate any help you can provide!

Hello Glorfindel,
Welcome to the HP Forums.
I understand your concerns with the Laserjet 1022N. If you're looking for a Windows 2012 print server, then there is no full feature software. Now, for your Windows 8.1, there is a full feature software on the HP website here.
If you need help install this software over a network connection, then please follow this HP document on Installing the Printer Software in Windows 8.1 for a USB or Network Connection.
Please let me know if you have any further questions.
I worked on behalf of HP.

Wireless ThinkPad 11abgn for Windows XP, 2000 ver.7.4.2.105 - new event log entries since update

On 10/17/08, I updated my wireless ThinkPad 11abgn driver from version 6.0.3.94 to 7.4.2.105. The update was a nice improvement as I now connect faster than with the older driver. However, although no impact to my T60 performance, ever since the new driver was installed, the following has occurred:
1. A new entry in the Event Viewer called ACS
2. Multiple "ccxroaming" entries are generated every time my laptop comes out of standby (anywhere from 4 to 7 entries each time!)
3. Since 10/17/08, I have generated 951 ACS events!!
For example, this morning, after coming out of standby (AC mode), the following entries were generated from oldest to newest:
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:28:57 (my computer name) Wireless Adapter removed...
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:28:57 (my computer name) New Wireless Adapter detected..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:02 (my computer name) System resumed from suspend state..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:02 (my computer name) New Wireless Adapter detected..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:03 (my computer name) System resumed from suspend state..
The description for Event ID ( 1 ) in Source ( ccxroaming ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: <15> Oct 28 8:29:06 (my computer name) Wireless Adapter associated successfully..
I can understand Lenovo possibly wanting to generate this information when testing a new driver in-house, but does this really need to be passed on the end user?
T60, 8744-5BU: 2.0 GHz T7200, 4 GB RAM, 15.4" WSXGA+, 1680x1050 ATI Mobility Radeon X1400, Win 7 Ultimate w/SP1 - 64-bit

I downgraded upower, and it didn't fix the problem, so I re-upgraded it and built/installed xfce4-power-manager-git. It's now reporting the correct battery level but the systray icon is missing (replaced by the 'blank screen' icon).
EDIT: in fact, no, it's still not reporting correctly.
Last edited by markhadman (2014-04-19 12:35:08)

Thinkpad 8 for Windows 8.1 x64

Similar Messages

Maybe you are looking for