Thinkpad A31p doesn't recognize HDD
Hello, I'm new to the form.
A friend has this Thinkpad A31p with no HDD. He got a new WD-120gb ATA-6 from Newegg. We don't know if this drive is compatible. He wants to install XP on it but the computer doesn't recognize it. He doing this from scratch. Any ideas.
Thanks
Here you go:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180347070612&viewitem=&salenotsupported
BTW, I am NOT affiliated with the seller in any way.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Similar Messages
-
Ibook G3 doesn't recognize HDD
I dropped my computer few weeks ago. Since then my ibook doesn't recognize hdd. It works only on starting up sounds and just shows grey display and question marked folder and apple logo. I tried to reinstall osx again with installation cd. It was processed until it is asked to choose disk which I install OSX. It doesn't show any disks. So I should stop installation.
When I check Hardware test, "Massive Storage" was passed.
My HDD is dead? or Could I try another way?Hello,
As the user said above, your HD has gone to heaven. You may purchase basically any hard drive for the system as long as the HD is 9.5 mm tall. The interface type also must be: UATA-66
You can purchase these drives almost anywhere. Here is a table where that shows drives that should fit:
Click Here
Toshiba drives seem to work best in apple products.
You can install HD's in about 2 hours.. Here is a tutorial on how to do it:
12 Inch Version: Click Here
14 Inch Version: Click here
Good Luck,
Grant -
Macbook pro unibody doesn't recognize hdd, is it cable or motherboard?
Hi,
A few weeks ago I replaced my hdd in my macbook pro 13inch med 2010 with a ssd. Some weeks after I did it, my macbook didn't boot up anymore, it showed a flashing folder. I put my old hdd in and it still doesn't boot up. I use my macbook now by booting from a external harddrive through usb.
However this makes the laptop much slower so I want to fix the problem. My problem is: how do I know if it's the cable from hdd to motherboard is broken or the connector on the motherboard itself is broken?
Hope someone can help me out,Aahh, so DiskUtility does not see the HDD that is inside at all? That means trouble: either the HDD inside is dead, but probably the cable inside is not connected correctly or is damaged (or you forgot to connect a cable).
I suppose that you wanted to change the HDD with the SSD, and that you have cloned the HDD to the SSD (while externally), then after a while the MBP did not start tanymore form the internal (SSD) and you switched them again, and it still does not start from the internal (HDD), but it will from the external (SSD). The MBP starts from the SSD (outside), so that is OK, but the HDD inside is not recognised anymore.
-hanging question: What OS do you run (you have 10.0.x indicated)?-
I deduct that it is either a loose connection or a damaged connector inside.
To be sure you could switch them again and see if the MBP starts from the outside HDD (if not, and it starts from the inside SSD, the HDD is wrong), but I guess that then the MBP will not switch from the inside disk either. -
My Old Classic 1st Gen 10GB doesn't recognize by computer
My cousin gaves me his old iPod Classic 1st gen
It's work well...I can listen my foavourite music
Because he used windows..so..the format of the iPod is FAT32
And...I'm using Leopard..so...i Format the iPod to become Mac
then..the display show the folder with punctuation mark, this Icon :
http://km.support.apple.com/library/APPLE/APPLECAREALLGEOS/TS1405/TS14051.gif
then..i Follow the insruction from the apple here :
http://support.apple.com/kb/TS1405
- I go to DISK MODE..it works!!
- I Charge my iPod in Disk MOde..it works!!
- I get into diagnostic mode..it workss!!
- I get into HDD Scan ini diagnostic mode..it passed...it works!!
- I get into "run in" ini diagnostic mode...it works!!
Everything I have done..never make the iPod recognized by win/mac
after fully charged..i go into normal mode...it doesn't recogized by iTunes
I go into Disk mode..it Doesn't recognize by computer
I'm getting tired....I go to Apple service..
u Knnow what they said : " Must Replace the harddisk"
but..I have argument that it's not about shardaware problem..it's about software problem
May..anybody here can help me?
thanks.....
I'm getting tiredI think my ipod comes from the same generation and it took a while before i got the right information. I have an old version of itunes(plus whatever other software is on the cd) and i think that is what made it work. I got the same error at some point and once it synced with itunes it went through a process to correct the problem. I got the ipod maybe two years ago so the information is sketchy. I synced and reset it i think via windows originally even though i am a linux user but i could not work out how to do it in linux then as i was pretty new to it. Plus the guy at the Apple shop told me it is better to do it in windows. Well they don't know linux. So maybe an older version of itunes might be the clue to solving this? I might have also changed the battery at that time ....
My ipod has been syncing with both windows(itunes) and Linux apps on many machines over the past two years. Anyway if i can think of more info i will let you know. -
[X301] Laptop doesn't recognize optical drive! Help!
Hello,
my ThinkPad X301 2774-LFG doesn't recognize the optical drive! Can anyone help me???
Informations about the ThinkPad
1.) Newest BIOS is installed (1.02 (6EET21WW) 2008-10-09)
2.) BIOS-Option Security->I/O Port Access-> Optical Drive is ENABLED
3.) Laptop starts fast without Drive and very slow with Drive in Bay
4.) No Drive in 'Boot Device List' when Drive is installed
5.) all other BIOS-values standard too
6.) No drive recognition in Vista (ultimate 32bit)
7.) PC Doctor show no defects
8.) Lenovo sent new drive, but it's all the same
Is the board defective or are there still other possible reasons for this problem???
Regards
Volker
Solved!
Go to Solution.Hello Volker, welcome to Lenovo forums!
Unfortunately it seems you have already tried everything to force it to work.
If it´s not recognised in bios, I would suggest to call support.
You might try a Linux live CD, but there´s no really hope
and you already know it too, as an experienced ThinkPad user, I think.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español -
6140 + CSM200 - Doesn't recognize drives
Our company have 6140 with 16 HDD's and bought used CSM200 tray with 8 HDDs
The problem is - CAM doesn't recognize drives in CSM200:
TRAY,SLOT STATUS CAPACITY CURRENT DATA RATE PRODUCT ID FIRMWARE VERSION
1, 1 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 2 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 3 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 4 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 5 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 6 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 7 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
1, 8 Removed 0 GB 4 Gbit/s ST330055FSUN300G 3192
Events:
Date/Time: Sun Feb 21 10:25:03 GMT+03:00 2010
Sequence number: 5158
Event type: 2401
Event category: Notification
Priority: Informational
Description: Hot swap monitor detected drive insertion
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot A
Date/Time: Sun Feb 21 10:25:04 GMT+03:00 2010
Sequence number: 5119
Event type: 2401
Event category: Notification
Priority: Informational
Description: Hot swap monitor detected drive insertion
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot B
Date/Time: Sun Feb 21 10:25:10 GMT+03:00 2010
Sequence number: 5169
Event type: 2229
Event category: Notification
Priority: Critical
Description: Drive failed by controller
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot A
Date/Time: Sun Feb 21 10:25:10 GMT+03:00 2010
Sequence number: 5170
Event type: 2229
Event category: Notification
Priority: Critical
Description: Drive failed by controller
Event specific codes: 0/0/0
Component type: Drive
Component location: Tray.01.Drive.06
Logged by: Controller in slot B
Tried to reboot, reinsert drives...
Upoaded supportdata to:
https://rapidshare.com/files/2236386494/supportdata-BIS-STORAGE-02-21_2_2012-4_19.zipHi.
It's look like that new disk was used at array with FW 7.x and have new version of DACstore.
You can read
http://www.ibm.com/developerworks/forums/thread.jspa?threadID=340296&tstart=0#14528182
support.oracle.com : ID 1019666.1
For check:
Connect serial cable to array controller, set boudrate. Reseating one new disk.
message like:
08/25/08-17:50:45 (GMT) (ssmDriveSpinTask): WARN: Unsupported dacstore: dev = 0x1
means that is true.
Possible solution: Connect CSM200 directly to server and clear disk. ( dd for example).
For test - start with 1 disk and check.
After - Connect CSM200 back to 6140 and check this disk.
Regards. -
X240 freezes, bluescreens, doesn't recognize SSD
As the Lenovo Phone Support was not able to help me I'll try my luck here.
My newly purchased X240 (20AMS20C00) is sadly having some issues:
- 2-3 times a day the machine just freezes mid-usage. If I was watching video the problem announces itself by playing the last few seconds of audio again and again. At first the system seems to keep responding but the more buttons I click or programs I try to start, the more unresponsive it gets until its completely frozen. --> Feels like a hard drive issue to me
- Sometimes (today 3 times in a very short timespan) the laptop freezes and then shows a bluescreen "CRITICAL PROCESS DIED). Then it restarts and doesn't recognize the hard drive. Sadly I forgot the exact error message. After a few restarts it boots again.
Here's my configuration:
Windows 8.1 with all updates installed
All drivers up to date
BIOS/UEFI: GIET69WW (2.19 ) according to Lenovo Solution Center
Also, directly after purchasing the machine I replaced the internal hard drive with a Crucial M500 SSD which is running the most recent firmware.
I also did update the BIOS via System Update. Before that I didn't experience any of these problems. But as I updated it on the first day I just might not have noticed. According to the release notes of the BIOS update it was supposed to fix exactly the kind of problems I have now.
A complete system scan with the Solution Center showed everything to be ok.
What else can I do? It's very frustrating because aside from all this I am very satisfied with the laptop, but if I have to worry that it might freeze in the middle of writing an important text it's completely unusable.I have possibly similar symptoms. I replaced the HDD in my X240 (20ALCT01WW) with a Samsung 840 Pro SSD. I use full disk encryption with Debian Jessie, but I've also run Fedora 20 and some live CDs. After a few hours of usage the filesystem will switch to read-only and dmesg will report a ton of SATA-related errors, incluing a medium error and unrecovered read errors.
[ 56.082629] Sense Key : Medium Error [current] [descriptor]
[ 56.082632] Descriptor sense data with sense descriptors (in hex):
[ 56.082633] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 56.082639] 00 00 00 00
[ 56.082641] sd 0:0:0:0: [sda]
[ 56.082643] Add. Sense: Unrecovered read error - auto reallocate failed
[ 56.082644] sd 0:0:0:0: [sda] CDB:
[ 56.082645] Read(10): 28 00 00 00 00 00 00 00 08 00
[ 56.082650] end_request: I/O error, dev sda, sector 0
[ 56.082652] Buffer I/O error on device sda, logical block 0
[ 56.082660] ata1: EH complete
[ 56.086399] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 56.086402] ata1.00: irq_stat 0x40000008
[ 56.086404] ata1.00: failed command: READ FPDMA QUEUED
[ 56.086408] ata1.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
res 41/40:08:00:00:00/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[ 56.086410] ata1.00: status: { DRDY ERR }
[ 56.086411] ata1.00: error: { UNC }
[ 56.086931] ata1.00: configured for UDMA/133
[ 56.086937] sd 0:0:0:0: [sda] Unhandled sense code
[ 56.086939] sd 0:0:0:0: [sda]
[ 56.086940] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 56.086941] sd 0:0:0:0: [sda]
[ 56.086942] Sense Key : Medium Error [current] [descriptor]
[ 56.086945] Descriptor sense data with sense descriptors (in hex):
[ 56.086946] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 56.086952] 00 00 00 00
[ 56.086954] sd 0:0:0:0: [sda]
[ 56.086956] Add. Sense: Unrecovered read error - auto reallocate failed
This would necesssitate powering the computer off and on. After about three times my SSD got corrupted in some way, and was completely unreadable by the laptop, including in Fedora and some other Linux Live CDs.
I figured it was a problem with the drive, so I submitted a warranty claim to Amazon and replaced it. After three hours of usage the same symptoms reappeared. I put the SSD in another computer and the partition table was corrupt, but the drive could be accessed (more than the X240 could do after the error manifested).
I believe this is a problem with the SATA controller or some other low-level hardware on the X240 (perhaps the CPU's hardware encryption module, as I was doing FDE?). I find it very unlikely that two SSDs failed with only a few hours of usage. -
Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?
I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0013AC2C0E8DEF50
Current user is an administrator.
The current local date and time is 2012-06-12 20:13:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Jun 12 19:48:36 2012
Lease Expires: Wed Jun 13 07:48:36 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Well, you do not mention what computer OS you are using, so here are the support documents for both.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591 -
ITunes doesn't recognize either of my iPods
I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.
Hi Tanskalinen,
If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW
Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.
-
After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
THis also happened with my old iphone 4s
I need help!Hi loist,
Thanks for visiting Apple Support Communities.
If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
Tecra M4 - DVD drive doesn't recognize any disk under Vista
Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your helpMaybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized? -
How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.
Ask the headset manufacturer.
Barry -
I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.
iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.
Maybe you are looking for
-
Change text colour in mail replies
with Community Support help, I have found the 'colour' icon and how to get it on the toolbar when composing an email, but it's not an option in the 'reply' or 'reply all' mode - the choices to customize the toolbar there are far fewer and don't inc
-
Inserting an image into a table using the iPad?
I am trying to make an evidence table in pages. I need to insert photographs into a table, next to the related statement. Is it possible to insert a photograph into the table on an iPad as I obviously don't have the 'command' button that others are u
-
Hi all, Can any body explain the what is the use of LX13(Transfer Order with Difference) report? and what is it mean if it will show like 001 Goods receipts Direction of flow text Storage Type No items Stock removal to--
-
How we can use OR operator with string in java??
-
Error 1003007 when loading using load rule???
I'm getting the following error when loading data using a load rule and could use some help in figuring it out. "Data value [40] Encountered Before All Dimensions Selected, [424] Records Completed" Does this mean that field 40 in record 425 has a pro