ThinkPad Bluetooth Sees Other BT Objects, but Won't See My BT Mouse

My ThinkPad T420S Bluetooth is happily paired with my BT Printer and with a ThinkPad Bluetooth Mouse. It will also "see" my BlueTooth phone when I make the phone's BT discoverable. When I tried to pair it with a new Lenovo BT Mouse or with a new Targus Bluetooth Comfort Laser Mouse by using Bluetooth's "Add Device" Box, however, neither mouse would appear in the "Add Device" box.
I have a ThinkPad 420S, Windows 7, 64 bit, Microsoft Bluetooth Enumerator (driver version 6.1.7601.17889) and ThinkPad Bluetooth 3.0 (driver version 6.5.1.4500). The Device Manager says that my Bluetooth is working properly.
When my ThinkPad failed to "see" a new Lenovo ThinkPad Laser Mouse, I assumed that the new mouse must be faulty and returned it. But now that it won't see a new Targus BT Comfort Laser Mouse, either, I'm puzzled. In both cases, the mice had new batteries.
What baffles me is that my ThinkPad's bluetooth can see other discoverable BT devices -- including my old Lenovo BT Laser Mouse, which I was trying to replace because the left button has started to get temperamental.
Puzzling, no? Any suggestions?

Upon further research I have learned that A2DP is not supported with any OSX 10.4.11. I think using Jack might be as close as I can get.

Similar Messages

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files Tried to do as a backeup t

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files

I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
regards

GLPCT has entries from MM, SD & other origin objects but not in GLPCA

Hello,
We have a situation as below: amounts are not actuals to simpliy problem:
GL account involved is ABC which is a Retained earnings account.
FBL3N displays 100
GLPCA displays 100 with origin object as 35 - entries from FI
But GLPCT displays 160.
Reason is that in GLPCT there are lines with many more origin objects. There exists a line with origin object 35 which is exactly displaying the figure of 100.
But there are additional lines with origin ojects like :
1 Profit center
2 Cost center
4 Production order
5 Billing document
7 WBS Element
9 Network activity
45 Reconcilation object
Of these I could understand that if suppose we have a direct entry in PCA then in GLPCA & GLPCT we have lines with origin object 1. But currently we dont have any line in GLPCA with origin object 1.
Also a major question is how other origin objects are updated in GLPCT without reference in GLPCA & no link in GL line items BSEG.
The problem is that users want to run report S_ALR87013340 & are comparing with total of FBL3N. But the report shows the total of all the origin objects in GLPCT & hence the balance is never balancing with FBL3N.
Note - No archiving has been carried out.
Please help in understanding the GLPCT updates.
Thanks & Regards
Shreenath

Hello Eli,
Thanks for the prompt response. I have read the note. It doesnt explain however from where these various origin objects are getting updated in GLPCT.
The problem is not that the total for origin object 35 is different. It is exactly matching in GLPCT, GLPCA & GL line items.
But how to understand & trace what are the entries which are updating different origin objects in GLPCT directly.
Please help.
Thanks & Regards
Shreenath

Laptop sees Photosmart on network, but won't connect

I have a Pavilion dv4 with Windows 7. I have a Photosmart C4795. My printer used to be hooked up to my desktop, but my HP Desktop has crashed and it's trash. So now I'm trying to hook my laptop up to my printer on the network. For two days, I was able to connect and download with no problems, but my laptop would never print. Wouldn't even do a test page. Uninstalled and reinstalled at least 10 times. I ran the scan doctor and it said there was nothing wrong with my printer, but it wouldn't print a test page either. It then had me do an internal test page and that one work, so it diagnosed that the software was bad.
All of that was yesterday. NOW TODAY, I uninstalled and reinstalled the software. It's the most up to date software and drivers from the HP Support page. Now, my printer recognizes that the printer is on the network, but won't install the printer. It did the diagnostics, then brought up the screen where it showed my computer on the left, modem in the middle, printer on the right. It gets about halfway through setting it up, then quits and says it can't complete. I ran the scan doctor again and it says that the full software version is not installed. I JUST downloaded it from the website and installed it twice and it won't work. The version I download from the website is around 146mb, but when I download it from the scan doctor page, it's over 200 mb. I run that software and it is exactly the same.
I have tried to set it up via usb. It gets to the 7th of the 8 steps, then it won't go any further. Again, the printer is detected, but it says the appropriate drivers aren't there.
I have tried to set up it's own port using it's USB and a different driver, but that gives me an error. Unable to install printer. Operation could not be completed (error 0x000003eb).)
Would someone please help me, and then if I reply with what it is doing next, please respond?
Please help me get through this. Two days now and I don't have a solution.
Just me, friebe13

Hi,
If you are using AT&T wireless router to connect the Photosmart to network, you can refer this link for a solution :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03112838&tmp_task=solveCategory&cc=us&dlc=en&la...
Hope this helps.
Click "Thumbs up" if this helped you in any way.
Its a pleasure talking to you ! Have a Great Day!
I work for HP, but my comments and recommendations here are my PERSONAL views and NOT on behalf of HP.

AC411 pairs via Bluetooth to my Latitude E5440 but won't function as it says it needs a driver

I have a 6-month old Dell Latitude E5440, running Windows 7 Professional Service Pack 1, 64-bit.
My partner bought a brand new Windows 8 computer from Dell last week and AC411 speakers with it. They work fine together.
I would like to play music from my Latitude. The speakers pair fine on Bluetooth (although the icon shows up as a headset not as speakers) but the device won't function as it tells me I need to install a driver. However the Dell website says there is no driver available.
Help!

Hello Chris, and thank you for your answer. But no, that didn't work. I'd done all that already, in fact.
My laptop is paired already to the AC411; my Dell laptop knows there is a Dell AC411 and it's listed under my devices as a Dell AC411 under the category of Bluetooth headset (with a headset icon). But its status is that it needs troubleshooting and when I click on 'troubleshoot' it tells me that it needs a driver but can't find one. And then when I look on the Dell website, it says there is no driver.
And just to be clear, there is no evidence that the headset icon shows the device is enabled, and there is no check box to listen to music.
Thanks,
Dave

Macbook sees bellsouth wireless dsl but won't connect

My macbook sees the wireless signal from my bellsouth modem and it says it is connected but when I try to get online it says I am not connected? any ideas? I have searched the forums but can't find the answer..

No definite solution, but a few ideas:
You may want to try connecting through ethernet; if this works, you've narrowed down the issue. A router reset is a basic step. You can also try changing your security settings. My router will only work with my macbook with WEP encryption, for instance, not WPA.
Hope this helps a little,

IPhoto sees Canon Powershot camera but won't load photos

After I upgraded to Yosemite my iPhoto no longer would load photos. It sees my Powershot G3 camera but then gets stuck on loading... window.

Try to import directly from the camera's memory card via a card reader into iPhoto to see if iPhoto will recognize the card out of the camera.
If not use the card reader to upload the photos from card to a folder on the Desktop and import from there. Personally, that's my preferred way as it assures that the files are safely on the hard drive before importing into iPhoto.

My bmw sees bluetooth for iphone 5 calls but can't see phone for audio

Just got a new BMW 2014 model
iphone 5 connects fine for phone calls
But the audio/bluetooth doesn't get seen by the BMW
Anyone else got this?

Hello mickybovars,
For issues with your iPhone not sending audio to your car, check out the article below for more information. Make sure that you are up to date on iOS 8.1 and also check out the link for some other troubleshooting for issues with Bluetooth.
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/en-us/ht6473
Regards,
-Norm G.

Why does my iPhone 4 Bluetooth just keeps saying "Searching" but won't show devices.

When I go to my bluetooth settings, it says it's in discoverable mode & just keeps searching and not popping up any devices. I have iOS 7.0.2. I'm trying to connect my bluetooth headphones.

I even tried to use bluetooth connection on both my parents' iphones, it just keeps saying "searching".

IMovie 5.0.2 sees and controls camera but won't display video or sound

OK, my camera used to work with my iMac G4 800 just fine, it's a JVC GR-DVF11U back from the stone age (heh but I am having trouble getting any video or audio on my PB 12" G4 with iMovie 5.02. iMovie will control the camera (play, stop, ff, review) just fine but all I get is a blue screen. I tried a friends (modern) Sony (not sure of the model #)and had the same results so I think it's a problem with iMovie, not the cameras. Anyway, any help ya'll could give would be great Thanks

Welcome to discussions!
First-if your mac can control the camera but not see the video,
*Open Garageband
*Play a note or two
*Close Garageband
*Open iMovie
The camera will work now-REALLY!!
If not, look here:
http://docs.info.apple.com/article.html?artnum=43000
Sue

Thinkpad Yoga S1 Runs off AC but won't charge the battery

I have recently purchased an S1, which is now having an issue that I can't seem to resolve on my own. The laptop works (almost) perfectly on A/C, but doesn't charge the battery. I noticed yesterday the battery was low (which was surprising, because I had only recently unplugged it) - so I plugged it in to charge.At which point, the battery icon in the system tray stated "8% (plugged in, not charging).I've tried the following to fix this: 1) Leaving it plugged in overnight completely off. 2) Running the battery calibration (fails w/ unexpected error). 3) Tried turning off battery optimization (Option is removed in newer version of drivers, so NA to my issue). 4) Tried reinstalling the power management drivers anyway (even though I already had the newer version). 5) Holding down the power button for 30 seconds, both plugged in and not plugged in (suggestion from forum). 6) Holding down the reset button (pin reset on the mobo) for 30 seconds, both plugged in and not plugged in. 7) Charging from BIOS. 8) Letting the battery run down to 0% in BIOS, then rebooting on A/C (another forum suggestion). Now I'm just at 0% plugged in and not charging. Previously I said the computer almost worked perfectly, the almost is that the CPU is stuck at ~800mhz, even with all power management turned off (including Speedstep in BIOS) and the power profile set to high performance. Can anyone think of anything else I can try before I give up and send this thing back? It was working perfectly for the last couple of weeks or so, including getting ~ 4, 5 hours of battery life, so unless the battery failed very suddenly I can't imagine why it would just start refusing to charge.

well I replaced the battery with another one I bought (exact same model for the battery SONY 45N1705, I was hoping I would get another battery version because I notice there is an update for the other battery revision that fixes issues with battery stopped charging. http://support.lenovo.com/us/en/downloads/ds001322. I forced the bios update from 1.07 to latest 1.24 using olydbg to skip the battery check. this did not help with anything relating to the battery. now I am stuck again where I was at the beginning..... im looking at buying a board replacement.... also I was looking at replacing the power supply but I check the voltage and the amps, and it is correctly matching what is written on the back of the laptop. still getting the 0% plugged in and charging.

Installed Firefox on other Windows laptop, but don't see a way to get your Calendar program (with the Ribbon) installed or downloaded.

My IBM laptop was stolen yesterday and I am trying to recover on a Dell laptop.
Mozilla Firefox is installed, but how do I get your Calendar program showing up under Tools, like it did on my first laptop?

I don't think it was a Google Calendar program. It came some time (years) ago with Mozilla Firefox. Its name may have included "Reminders". Originally, the icon of a ribbon showed up on the top of the browser, like next to "Help". You clicked on it there you got the Calendar. A few months ago, the ribbon icon disappeared and you had to click on "Tools" and that program showed up in about the 4th position. I think the data was stored on the Web, and therefore I was hoping to recover it.
Sorry, I don't know what Thunderbird is or Lightning.
Thanks for trying to help,
Joost Mortelmans

When bluetooth is enabled, my left click won't work on my mouse???

My magic mouse stopped working with my left click. So i rebooted and plugged in a corded mouse. the left click still didnt work so I turned off bluetooth and it started working again.
here are my specs:
Mac Pro
Mid 2012
Processor 2 x 3.06 GHz 6-Core Intel Xeon
Memory 32 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software OS X 10.9.2 (13C64)
what in the bluetooth would cause this?

The following items may use or garbage-up the 2.4GHz band used for WiFi and Bluetooth:
Your neighbors' Routers, especially if there are more than two.
Too many Bluetooth devices nearby.
USB cables that are not rated for at least USB-2 and tagged that they are certified.
USB-3 devices whose cable are near Bluetooth devices.
Recommendations:
Use a Dual-Band Router for your WiFi to get it to use the additional 5GHZ band and get out of the way.
Use only cables that are tagged as certified -- set aside any "lowest bidder" cables that shipped with a drive.
Dress all cables away from your bluetooth devices.

MBP won't see my Magic mouse

Hi, I have a 13" MBP running LION and I'm trying to pair a Magic Mouse with it. In the Bluetooth window, the "Discoverable" box is grayed out so I' am unable to connect my mouse... I've tried to activate the Discoverable button with no success. It just won't even see the mouse ...The mouse I bought from a friend and it was previously paired with that computer. Battereis are good and it's turned on...Any suggestions to get this mouse to be discovered ? THANKS

Still valid.
Mac HD>Library>Preferences...drag these two files to your desktop:
com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile
Delete them from preferences, turn Bluetooth off, reboot your computer. Turn Bluetooth back on, try again. If everything works, delete the two files from your desktop.

I previoulsy have adding many CD to my iTunes music library and then synched them with my iPhone so that I have all music in both places. And I could the CDs in iTunes or iPhone with no problems. Recently, my iTunes "sees" the music but won't play it. Why

I have added many CD to my iTunes music library and then synched them with my iPhone so that I have all music in both places. Then I could the play them in iTunes or iPhone with no problems. Recently, my iTunes "sees" the music library but won't play any of it becuase "the original could not be found". If I attach my iPhone, then it pays them through the iPhone, but still not through the library in iTunes. How can I get the music library on my iPhone to transfer (i.e. restore it) to iTunes? I have iPhone 4S but have not upgraded to the iOS 6, and have not had any problems until last week. Help! Thanks.

Check the manual for whatever backup program you used, or, if you just copied the files over, copy them that.
How to restore data to your PC is outside the scope of these forums.

ThinkPad Bluetooth Sees Other BT Objects, but Won't See My BT Mouse

Similar Messages

Maybe you are looking for