ThinkPad DVD Ultrabay Slim Burner

I bought an X61 tablet and Ultrabase X6 from a friend, which is shipping now. However, the Ultrabase doesn't have an optical drive. Would I be better off purchasing a Ultrabay Slim Burner (if this can be done) and installing it myself or buying a unit with a burner pre-installed?
Solved!
Go to Solution.

Hi nicktodd, welcome to the forum,
I would just purchase the drive. There is a bay for the drive in the Ultrabase which has a weightsaver in it, just reove it and slot the drive in - couldn't be easier.
Andy  ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
  Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
PepperonI blog 

Similar Messages

  • LENOVO IBM Thinkpad Multi-burner Plus Ultrabay slim Drive P/N: 73P3342

    Can you tell me if the multi-burner plus Ultrabay slim drive P/N 73P3342 is compatible with a ThinkPad 600X (Type 2645-4eu)?

    Welcome to the forum.
    Unfortunately, the answer to your question is : No, it's not compatible.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Re : T400 2764CTO, 2nd HDD Adapter for an Ultrabay Slim, to be used in the DVD bay

    What is the part # for the 2nd HDD Adapter for an Ultrabay Slim, to be used in the DVD bayCan you also confirm it is a SATA connection, I have already been sent an IBM P/N 41U3148 which has the IDE connection and appears not to fit.
    Thanks for help 

    shan_mcarthur wrote:
    Actually, it is entirely accurate.  Here is another related thread with a lot of pictures that demonstrate the problem.  I have 3 Lenovo W520s and 3 useless Lenovo Ultramedia bay adapters.  I cannot tolerate the gap because it causes frequent drive dismounts when I pick up the laptop when it is running or even touching the side.  The newmodeus adapters I purchased to replace the defective Lenovo adapters have been rock solid!  I recommend visiting all the picture links on this thread.  It will clearly demonstrate the problem:
    http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/Will-Hard-Drive-Bay-Adapter-II-two-work-in-W52...
    Shan, it isn't entirely correct because we have a lot of W510 and W520 users in my company this doesn't occur with. I am not discounting the problem. I only take exception to the statement that blankets ALL users and ALL hard drive adaptors.  Doing that is incorrect.

  • Replace T500 ultrabay slim cd/dvd drive

    I currently have a T500 with a CDRW/DVD drive. I didn't think I would have to burn dvd's, but unfortunately.. I do.
    Can I just buy any generic slim dvd drive to replace it or is the bay specific to lenovo cd/dvd drives? If I have to purchase a lenovo drive, I'll probably just buy an external drive since the lenovos tend to run at rather high prices.
    If you need to know, I'm currently running on Vista Basic.
    Well thanks for any help in advance.
    Solved!
    Go to Solution.

    You need an Ultrabay Slim DVD drive. In US these are the alternatives.
    T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

  • Is UltraBay Slim Blu Ray drive comming?

    A few companies have 9.5 mm thick Blu-ray burners now. Does Lenovo have plans to provide and UltraBay Slim Blu-Ray drive option?

    Hello,
    I noticed that Lenovo has a ThinkPad Ultrabay Enhanced Blu-ray Burner, which is a 12.7mm part for the R61 series, so perhaps they will introduce a 9.5mm Ultrabay Slim part when they become more readily available.
    Have you considered purchasing a bare 9.5mm drive to see if you can adapt it with the caddy and bezel from an existing Ultrabay Slim device to fit in your system?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • New Ultrabay Slim Optical Drive for T60

    I'm after a new Ultrabay Slim Optical drive, whether CDRW or multiburner for my T60.
    Cn anyone suggest what model numbers I should be looking for, as the currently available ones seem to be incompatible?
    Many thanks.

    Hello,
    If I am reading the specs right, the following FRU's are compatible:
    DVD±RW:  39T2570, 39T2828, 39T2829, 39T2851, 41N5643 , 42T2506
    CD-RW/DVD-ROM:  40Y8783 (does not burn DVDs)
    Please double-check with Lenovo support in your country, though, to verify compatibility with your machine type, which is listed on a sticker on the bottom of the unit, and will look something like "1234-ABC".
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • X6 Ultrabase & Ultrabay Slim Drive compatible with X200?

    I am looking at ordering a new Lenovo ThinkPad X200.
    I currently have an IBM ThinkPad X60 with:
    1. X6 UltraBase Docking Station
    2. ThinkPad Combo II Ultrabay Slim Drive - Disk drive - CD-RW / DVD-ROM combo - 24x24x24x/8x - IDE - plug-in module
        a. This drive's model number is HL-DT-st dvdram gsa-4083n
    I know it's a long shot, but I'm wondering if either my existing UltraBase or UltrabaySlim Drive would be compatible with the X200.  It would save me a little money and recycle some parts.
    Anyone have a clue about this?

    no they are not compatible with each other. The ultrabase for the X200 is totally different to the one used in the X6x machines, the size are different too. The optical drive connector has changed from the PATA to SATA format. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Lenovo ThinkPlus TP Drive adapter Ultrabay Slim-HDD 2,5 with T40

    I am planning to buy Lenovo ThinkPlus TP Drive adapter Ultrabay Slim-HDD 2,5 for my refurbished T40. Are there any limitations for disk to be used with mentioned adapter ? e.g. Can I have 320 GB disk in this adatper ? I am asking because internaly I cannot have bigger disk then 80 GB (120 GB was not working)
    Thanks
    Jan

    You must have been doing something wrong with that 120GB drive, because there's no reason for it not to work. These machines take 160GB with no problems...been there, done that.
    Hope this helps. 
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • MBP 17" EJECTS DVD DISC WHILE BURNING 2X SPEED ERROR CODE 080020063 BY LW

    MBP 17" EJECTS DVD DISC WHILE BURNING AT 2X SPEED ERROR CODE 080020063 BY BIGHANDZ

    Thank you. This has worked, but I don't know why as it isn't anything I didn't do the last time. What a difference a day makes.
    Once again, thank you for taking the time to help.
    Jim

  • Can no longer Play DVD's or Burn Disks in on Macmini

    Hi,
    I have recently rebuilt my MacMini with a new WD500 Gb hard drive with Snow Leopard and that went fine.
    One issue that maybe related is that I can no longer play DVD's or burn items to DVD. I have had a look in system profiler and can see the Pioneer drive in the ATA Device Tree.
    When I insert a DVD, I hear the drive trying to run it but after a while it just spits the DVD out. If I insert a blank DVD, it recognises the DVD and I can select it to burn but when it starts the burning process it fails and again spits the disc out.
    Any help would be appreciated.
    Thanks
    Gavin

    http://www.macsales.com/ has numerous good optical drives. http://www.xlr8yourmac.com/ may list others.
    Note for 2 USB port Mac Minis (as opposed to 4 or 5 on the rear), be sure to get a Firewire optical drive, as Mac OS X won't boot USB on PowerPC Macs except in rare USB model drives that are hard to find.
    Message was edited by: a brody

  • HT201364 I have dvd's I burned on my old mac,10.5, now I can't view on my newer mac,10.7.5. Need some help

    How would I be able to view dvd's I burned with my older Imac w/10.5 on my current imac w/10.7.5?

    Thanks- Took your advice, it worked, but video seemed to be broken, pixeling. Hopeing to find something better since a so much time was spent making dvds.

  • DVD stops at burn step during One Step.  Why?

    I am burning to DVD home movies from mini DV tapes using the video camera.  Using iDVD and one step DVD option.  It begins ok but stalls and ejects blank DVD at the burn step.  Why? and what can I do to finish.  I am running OS 10.7.5
    Thanks for your help

    It's hard to say with the step one process.  A better workflow, IMO, is to use the regular method, create a project, add media, etc. 
    Then follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    This way you can trouble shoot the encoding process separate from the burn process.
    However be sure you're using good quality disks and burning at the slowest speed possible as mentioned above.
    OT

  • DVD WILL NOT BURN IN IDVD

    Trying to burn a project in IDVD, goes through the entire process up to "Writing Lead-In" and about 6 minutes left, the disk is ejected automatically. When put back in process gets hung up. Have also saved as a "Disk Image on my desktop and plays with no issues via the DVD software. When I select to burn to Disc, within 1 minute disk is ejected and this message comes up "The Disk can"t burn, because the device failed to calibrate the Laser Power for this Media". Is this a software or hardware issue? Or something else

    Hi
    • Trashing pref file - first thing to do (free and easy)
    • Cheap media is often a problem - I use Verbatim DVD-R and burn at x4 speed
    • Free space - is important BUT only on start-up hard disk (others doesn't matter)
    *Not knowing the origin to Your problem - General approach when in trouble is as follows.*
    • Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
    iDVD pref file resides.
    Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
    and is named.
    com.apple.iDVD.plist
    While iDVD is NOT RUNNING - move this file out to desk-top.
    Now restart iDVD.
    • Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
    • Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
    • Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
    • Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
    • Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
    • iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
    Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
    or
    Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
    • Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
    iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
    Last resort. from Craig. Solved the problem!! Finally!!
    I deleted every iDVD application and folder from my boot drive,
    emptied the trash and then installed iDVD 08 using the customize option
    and I am up and running.
    If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
    iDVD updated ?
    Apple Codec updated ?
    Start a New Clean project - or delete project assets
    No of Colors - must be set to millions
    EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
    Yours Bengt W

  • Is there a way i can burn a dvd to my macbook, then edit sections of that dvd and re-burn those sections i edited to a new dvd?

    Is there a way i can burn a dvd to my macbook, then edit sections of that dvd and re-burn those sections i edited to a new dvd?

    A DVD is not editable but there is a work around. Create a disk image with your Disk Utility program and put your content on it. When you are finished, burn the DVD using the disk image as your master. Don't delete the image. When you are ready to make edits, edit the content on the disk image and use it to burn the next DVD.

  • I want to use my home dvd player to burn dvds/cds onto my MacBook Air. Please help!?

    I want to use my home dvd player to burn dvds/cds onto my MacBook Air. I have an hdmi cord with thunderbolt connector. Where do I go from here?

    Apps for OSX aren't in iTunes: they are in the App Store in your Applications folder. The payment method is the one registered in iTunes. There's no app actually called Yoga Studio, though there are several Yoga apps. There is an iOS app called Yoga Studio but it appears to have no OSX equivalent, though I haven't done a detailed search.

Maybe you are looking for

  • IPhoto imports photos with wrong dates even if the dates are fine on the camera

    Hi! When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.

  • How do I change ichat from AIM to MSN on my macbook

    I'm trying to figure out how to switch my ichat from AIM to MSN.

  • How to create repository using a view in OBIEE

    Hi, Can any one explain the procedure how to create a repository using a view. For example test_v select a.col1,a.col2,b.col1,b.col4,c.col5,c.col6 from table a,table b, table c where a.col1= b.col1 and b.col1 = c.col1 1. Assuming that i have imported

  • Regarding Scheduled Delivery quantity

    Hi Friends, Can someone tell me how to create a test data in ME21N (Creating a purchase order) so that the schedule line items should be delivered partially. So, that the purchase order which I created should be able to see in the table VETVG. For ex

  • Error: ESS Track of JDI

    I am able to log in to JDI from NDS and I can see the ESS Track created, but when i select the track and hit the next button I am getting error "getRemoteDevelopmentConfigurationError". Actually I imported all required components and SAP_ESS.SCA, SAP