Thinkpad E531 Function Key Fix?
Is there a way to toggle the function key off so the F1 to F12 keys work as they would on a normal keyboard? I have found threads where you can change this in the bios on other machines, but there is no fix for this in the E531 bios. Lenovo, if you read these forums, this is a major design flaw.
Hi, it is a serious design flow. All our users are complaining about this totally obsolete function.
However, if you read the manual, you can see that you must use the keycombination [Fn]+[Esc].
The led on the [Fn]-key will light up, which means that you can use the function keys the normal way!
I sincerely hope that Lenovo is reading this forum and that they stop shipping computers with the wrong setup.
Function keys should be set according to the world standard: [F1]-[F12]
Similar Messages
-
My Edge E335 came with Win 7 but I later added Win 8.1 in dual boot. Win 8.1, free of all the Lenovo software, is better in use for me except that the function keys all have the Lenovo laptop functions for camera, screen brightness and so on rather than the default Microsoft functions with no option to switch with the Fn key. Is there a BIOS update available for 8.1, or any other way to have both sets of functions available?
Hello.
To keep your F1-F12 keys locked, just press FN+ESC once. When you wish them to return to the default media mode, then just press FN+ESC again.
Cheers!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB -
How to fix Right-side function key on E61
Hi,
the top right blue function key on my E61 is starting to stick out further than other keys on my phone - like it's about to fall of.
Is there any way to get this fixed?
Thanks for your help.Well I tried it again and now it works. Not sure what went wrong the first time.
-
I cannot access my function keys without hitting 'fn' key first. How do I fix that?
I have an Envy 17-2090 NR and it has been this way since purchase. I tried pressing and holding the fn key to no avail. This is really agravating as I use function keys in my games and other software all the time.
This question was solved.
View Solution.Christophian wrote:
I did not explain myself because that is patently NOT true. I have 4 laptops at this time. In all of them when I press F5, it is F5 not screen brightness or what ever. In order to access the 'blue' functions like screen brightness, keyboard lights, speaker volume etc. I have to press and hold the fn key. However, on my Envy, I have to press and hold the fn key to access F5 rather than just turning on and off the keyboard lights. Now I wish I could reword this thread.
OK. I don't claim to be perfect. I just looked at three of the notebooks currently at home The newest, which is a dv7-4180ea (HP loaner) has F keys is configured like on your Envy. The HP NX6320 and the Toshiba Satellite M305D have the F keys as main and have secondary functions. They are more straightforward with the use of the Fn key. It appears that it depends on what the manufacturers decided to do at the time.
BTW if you look back at my unedited post you will see that I did indeed qualify my statement when I wrote it with the word some. So that is not a patently untrue statement. I try to choose my words carefully. I will edit this post so you can see what I mean.
best regards,
erico
ed:
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Help me to Fix the Function key problem(error:41009)
Hi
Am using a partucluar calendar function which works in the normal mode...but does not work in the enter_query mode throws out the error 41009 Function key error...can u please help me out in this issue..am using a oracle 10g version of formsHai,
Can u provide the calendar function u r using.
Regards
Jeneesh -
Persistently lock function keys!?
Hello,
I would like to persistently lock the function keys at my E531 laptop.
I know you can switch between function keys and multimedia functions by setting FnLock (Fn+ESC), but unfortunately this setting is volatile: everytime I restart the system (even from power saving mode), it is lost and the keys default to multimedia again.
Using this laptop only for "real work", with software that extensively uses the function keys, this is really getting on my nerves...
Is there any way to persistently lock the function keys to generate F1..F12 keycodes?
If I'd ever need the multimedia functions, I'll luckily hold down the Fn key before...
OS is Windows 8.1.
Thanks for any help,
Tilmann
Solved!
Go to Solution.Tillman,
In addition to the suggestions Mithunr has made, I would ask if you are running the preload?
Could you also check to see that the hotkey drivers are installed, especially if you have done a reload of the system.
I mention this after reading this thread -> http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/ThinkPad-Yoga-FN-keys/td-p/1355211
Thanks!
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Lenovo Z500 Intel Graphics and Function Keys problem on Windows 10
Hi.i have a problem with Windows 10 upgrade.My Model Is Lenovo Z500. 6Gb Ram. Intel 3230m. Nvidia GT740m.Since the upgrade to Windows 10 the brightness is at full and i cant dim it,it's always the same.and there are two more problems.second one is my shortcut function keys(Fn + F buttons) don't work :bluetooth,touchpad,turn off screen,refresh etc... .Only buttons that work are for volume and for brightness that dont do anything when i try to lower it down but it shows in upper left corner that the keys are responding.And the third problem is i cant duplicate my display but only can extend .As far for the other stuff everything is smooth and fast.even my games got bigger FPS, for example "Counter Strike Global Offensive". I would like to know if there is fix for brightness and for duplicate screen problem regarding graphics driver, and for my function keys regarding keyboard. Thanks and i hope for quick response. I know Windows 10 just came out and i know you are at full capacitity for solving everyone's problem but i hope you'll look into this because i'm not the only one with this problems.
Hi phitbull,
Are all the hotkeys on your SL500 not working, or they are simply not displaying the controls on-screen? (ie. increase, decrease or mute will display on screen). It may be possible that you are missing out on some drivers for your system. If you look around the forums, there are many posts on users experiencing hotkey issues, mainly due to missing pre-requisite drivers. You can find a handful of drivers in the Lenovo Support website's Windows 7 BETA page at the following URL:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=WIN7-BETA
Perhaps you can give this a try:
1. Install the Lenovo System Interface Driver (v1.01):
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=WIN7-BETA#sid
2. Install the Hotkey drivers (which installs OnScreen Display v5.32.00 and ThinkPad FulLScreen Magnifier v2.07)
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=WIN7-BETA#atkh
Hope the above helps with your issues.
Lenovo ThinkPad Lover using R60, T60, T61, X61s, T410 -
X1 Carbon 2014 Function keys not working in windows7
Hello.
I have a brand new X1 carbon(model: 20A7-005KMD) that was installed with our company image, running windows 7.
Alle drivers in device manager has been installed, and system update is updated.
The carbon has the "touch" function keys and they only partly work.
When booting the computer i can swap between the different functions, but when i get into windows, its is "stuck" with only the options F1-F12. The F keys work, but i cant change settings by pressing the FN key on the left side og the touch display, and get sounds/brightness settings etc.
as said, this works just fine during the boot.
Any ideas what can be causing this and even more important - a fix?Hi Guys,
We are currently having the same issue on the X1 Carbon 20A7 models (20A7000LAU). In BIOS or during boot the function changing works without issue (limited to two (2) function screens how-ever), it stops working once you log in. If you then lock the computer you can change the functions, but then once you unlock the device, it stops working.
When the drivers are installed and the device is restart we get the above behaviour, if we uninstall the drivers the function keys will function as expected till the device is restarted. This is very strange behaviour.
On a device received by Lenovo there are 4 function changes/screens in total, we can only make two work temporarily as listed above. We have tried the following.
1. MDT 2013 Delivered Windows 8.1 x64 image image. All drivers/software components installed from the lenovo website. We receive above issue and cannot resolve by uninstall/reinstalling.
2. Vanilla Windows 8.1 ENT x64 image installed from Microsoft Volume Licensing portal, installed all drivers supplied from the Lenovo Website. The same behaviour is seen as above and is reproducable.
3. We have als compared all drivers/software installed on the factory supplied model to a manually built device, still the above behaviour is witnessed.
4. We have manually exported drivers from the X1 Carbon device from lenovo and injected them into the vanilla Windows 8.1 ENT or PRO newly imaged device, still the same behaviour above.
Please let me know what I'm missing, I'm certain this is a bug in the drivers for this model.
Regards,
Nic -
"Undefined Function Key. Press Ctrl+F1..." Porting app from 6i to 10G
I am running into a problem porting my application from Oracle Forms 6i to 10G. When I am querying a record based on a field that is not the first on the screen, I get an "Undefined Function Key. Press Ctrl+F1 for list of valid keys." error. I do not get the error using the same function keys from the first field on the screen. I also do not get the error if I click into another field (besides the one I an querying) before hitting my execute query key.
I did some research, and found a fix that seems to work. I can add a WHEN_MOUSE_CLICKED trigger to the form and put in the following:
Go_Item(:System.Mouse_Item);
That seems to fix the issue. My problem is that I have close to 400 forms to upgrade. I would like to avoid adding this manually to every single form. I have looked into libraries, but I can't seem to figure out how to replicate a WHEN_MOUSE_CLICKED trigger using procedures. I was wondering if there was a way to use the Forms upgrade utility to add this trigger to every form it converts. Does anyone know if that can be done?
Thanks in advance for your help with this.I'm not sure this solves the problem. This would call the trigger, but the trigger does not currently exist. I would still have to manually create the trigger in all 400 (or so) forms. Is there a way to add it in a more global way?
Thanks. -
[Solved] Asus Zenbook Prime (UX31A-DB51) Function key issues
I recently purchased this machine, and the final issue I have with is that the Function keys are not working. Looking at the wiki I saw that it should work out of the box with 3.4.4-2, and I'm on 3.4.5-1 and have issues with it. Following the instructions on building a patched module led to kernel panics.
Thanks in advance for any help
EDIT: dmesg output
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000d97e5000 (usable)
[ 0.000000] BIOS-e820: 00000000d97e5000 - 00000000d9de6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d9de6000 - 00000000d9de9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9de9000 - 00000000d9dfe000 (usable)
[ 0.000000] BIOS-e820: 00000000d9dfe000 - 00000000d9e04000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9e04000 - 00000000d9e06000 (usable)
[ 0.000000] BIOS-e820: 00000000d9e06000 - 00000000d9e0b000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9e0b000 - 00000000d9f64000 (usable)
[ 0.000000] BIOS-e820: 00000000d9f64000 - 00000000d9f68000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9f68000 - 00000000d9fa7000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fa7000 - 00000000d9fae000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fae000 - 00000000d9fb0000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fb0000 - 00000000d9fce000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fce000 - 00000000d9fd1000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fd1000 - 00000000d9fd3000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9fd3000 - 00000000d9fea000 (usable)
[ 0.000000] BIOS-e820: 00000000d9fea000 - 00000000d9ff0000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff0000 - 00000000d9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000d9ff8000 - 00000000d9ff9000 (reserved)
[ 0.000000] BIOS-e820: 00000000d9ff9000 - 00000000da008000 (usable)
[ 0.000000] BIOS-e820: 00000000da008000 - 00000000da009000 (reserved)
[ 0.000000] BIOS-e820: 00000000da009000 - 00000000da014000 (usable)
[ 0.000000] BIOS-e820: 00000000da014000 - 00000000da019000 (reserved)
[ 0.000000] BIOS-e820: 00000000da019000 - 00000000da037000 (usable)
[ 0.000000] BIOS-e820: 00000000da037000 - 00000000da039000 (reserved)
[ 0.000000] BIOS-e820: 00000000da039000 - 00000000da04d000 (usable)
[ 0.000000] BIOS-e820: 00000000da04d000 - 00000000da04e000 (reserved)
[ 0.000000] BIOS-e820: 00000000da04e000 - 00000000da060000 (usable)
[ 0.000000] BIOS-e820: 00000000da060000 - 00000000da086000 (reserved)
[ 0.000000] BIOS-e820: 00000000da086000 - 00000000da09a000 (usable)
[ 0.000000] BIOS-e820: 00000000da09a000 - 00000000da09b000 (reserved)
[ 0.000000] BIOS-e820: 00000000da09b000 - 00000000da09c000 (usable)
[ 0.000000] BIOS-e820: 00000000da09c000 - 00000000da09e000 (reserved)
[ 0.000000] BIOS-e820: 00000000da09e000 - 00000000da09f000 (usable)
[ 0.000000] BIOS-e820: 00000000da09f000 - 00000000da0a4000 (reserved)
[ 0.000000] BIOS-e820: 00000000da0a4000 - 00000000da0b9000 (usable)
[ 0.000000] BIOS-e820: 00000000da0b9000 - 00000000da65d000 (reserved)
[ 0.000000] BIOS-e820: 00000000da65d000 - 00000000da8dd000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da8dd000 - 00000000da8e2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000da8e2000 - 00000000da8e3000 (usable)
[ 0.000000] BIOS-e820: 00000000da8e3000 - 00000000da926000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000da926000 - 00000000dad35000 (usable)
[ 0.000000] BIOS-e820: 00000000dad35000 - 00000000daff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000daff4000 - 00000000db000000 (usable)
[ 0.000000] BIOS-e820: 00000000dbc00000 - 00000000dfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000011f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xda8b0000 ACPI 2.0=0xda8b0000 SMBIOS=0xf04c0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037556000) (371MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037556000-0x0000000037aa3000) (5MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037aa3000-0x0000000040004000) (133MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000009accd000) (1452MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000009accd000-0x00000000ce792000) (826MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ce792000-0x00000000ceac1000) (3MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000ceac1000-0x00000000ceac5000) (0MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ceac5000-0x00000000ceace000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ceace000-0x00000000ceb65000) (0MB)
[ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000ceb65000-0x00000000ceb83000) (0MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000ceb83000-0x00000000ceba1000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ceba1000-0x00000000cebf6000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000cebf6000-0x00000000cebfb000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000cebfb000-0x00000000ced71000) (1MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ced71000-0x00000000ced79000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ced79000-0x00000000d90f9000) (163MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000d90f9000-0x00000000d97b2000) (6MB)
[ 0.000000] efi: mem30: type=2, attr=0xf, range=[0x00000000d97b2000-0x00000000d97bb000) (0MB)
[ 0.000000] efi: mem31: type=3, attr=0xf, range=[0x00000000d97bb000-0x00000000d97e5000) (0MB)
[ 0.000000] efi: mem32: type=10, attr=0xf, range=[0x00000000d97e5000-0x00000000d9de6000) (6MB)
[ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000d9de6000-0x00000000d9de9000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000d9de9000-0x00000000d9dfe000) (0MB)
[ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000d9dfe000-0x00000000d9e04000) (0MB)
[ 0.000000] efi: mem36: type=3, attr=0xf, range=[0x00000000d9e04000-0x00000000d9e06000) (0MB)
[ 0.000000] efi: mem37: type=5, attr=0x800000000000000f, range=[0x00000000d9e06000-0x00000000d9e0b000) (0MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000d9e0b000-0x00000000d9f64000) (1MB)
[ 0.000000] efi: mem39: type=5, attr=0x800000000000000f, range=[0x00000000d9f64000-0x00000000d9f68000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000d9f68000-0x00000000d9fa7000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000d9fa7000-0x00000000d9fae000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000d9fae000-0x00000000d9fb0000) (0MB)
[ 0.000000] efi: mem43: type=6, attr=0x800000000000000f, range=[0x00000000d9fb0000-0x00000000d9fbd000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000d9fbd000-0x00000000d9fce000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000d9fce000-0x00000000d9fd1000) (0MB)
[ 0.000000] efi: mem46: type=5, attr=0x800000000000000f, range=[0x00000000d9fd1000-0x00000000d9fd3000) (0MB)
[ 0.000000] efi: mem47: type=3, attr=0xf, range=[0x00000000d9fd3000-0x00000000d9fea000) (0MB)
[ 0.000000] efi: mem48: type=5, attr=0x800000000000000f, range=[0x00000000d9fea000-0x00000000d9ff0000) (0MB)
[ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000d9ff0000-0x00000000d9ff8000) (0MB)
[ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000d9ff8000-0x00000000d9ff9000) (0MB)
[ 0.000000] efi: mem51: type=3, attr=0xf, range=[0x00000000d9ff9000-0x00000000da008000) (0MB)
[ 0.000000] efi: mem52: type=5, attr=0x800000000000000f, range=[0x00000000da008000-0x00000000da009000) (0MB)
[ 0.000000] efi: mem53: type=3, attr=0xf, range=[0x00000000da009000-0x00000000da014000) (0MB)
[ 0.000000] efi: mem54: type=5, attr=0x800000000000000f, range=[0x00000000da014000-0x00000000da019000) (0MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x00000000da019000-0x00000000da037000) (0MB)
[ 0.000000] efi: mem56: type=5, attr=0x800000000000000f, range=[0x00000000da037000-0x00000000da039000) (0MB)
[ 0.000000] efi: mem57: type=3, attr=0xf, range=[0x00000000da039000-0x00000000da04d000) (0MB)
[ 0.000000] efi: mem58: type=5, attr=0x800000000000000f, range=[0x00000000da04d000-0x00000000da04e000) (0MB)
[ 0.000000] efi: mem59: type=3, attr=0xf, range=[0x00000000da04e000-0x00000000da060000) (0MB)
[ 0.000000] efi: mem60: type=5, attr=0x800000000000000f, range=[0x00000000da060000-0x00000000da086000) (0MB)
[ 0.000000] efi: mem61: type=3, attr=0xf, range=[0x00000000da086000-0x00000000da09a000) (0MB)
[ 0.000000] efi: mem62: type=5, attr=0x800000000000000f, range=[0x00000000da09a000-0x00000000da09b000) (0MB)
[ 0.000000] efi: mem63: type=3, attr=0xf, range=[0x00000000da09b000-0x00000000da09c000) (0MB)
[ 0.000000] efi: mem64: type=5, attr=0x800000000000000f, range=[0x00000000da09c000-0x00000000da09e000) (0MB)
[ 0.000000] efi: mem65: type=3, attr=0xf, range=[0x00000000da09e000-0x00000000da09f000) (0MB)
[ 0.000000] efi: mem66: type=5, attr=0x800000000000000f, range=[0x00000000da09f000-0x00000000da0a4000) (0MB)
[ 0.000000] efi: mem67: type=3, attr=0xf, range=[0x00000000da0a4000-0x00000000da0b9000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x00000000da0b9000-0x00000000da119000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000da119000-0x00000000da133000) (0MB)
[ 0.000000] efi: mem70: type=6, attr=0x800000000000000f, range=[0x00000000da133000-0x00000000da139000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000da139000-0x00000000da13e000) (0MB)
[ 0.000000] efi: mem72: type=6, attr=0x800000000000000f, range=[0x00000000da13e000-0x00000000da140000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000da140000-0x00000000da15d000) (0MB)
[ 0.000000] efi: mem74: type=0, attr=0xf, range=[0x00000000da15d000-0x00000000da28c000) (1MB)
[ 0.000000] efi: mem75: type=0, attr=0xf, range=[0x00000000da28c000-0x00000000da5f2000) (3MB)
[ 0.000000] efi: mem76: type=0, attr=0xf, range=[0x00000000da5f2000-0x00000000da5f8000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000da5f8000-0x00000000da65d000) (0MB)
[ 0.000000] efi: mem78: type=10, attr=0xf, range=[0x00000000da65d000-0x00000000da72b000) (0MB)
[ 0.000000] efi: mem79: type=10, attr=0xf, range=[0x00000000da72b000-0x00000000da8c7000) (1MB)
[ 0.000000] efi: mem80: type=10, attr=0xf, range=[0x00000000da8c7000-0x00000000da8c9000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000da8c9000-0x00000000da8dd000) (0MB)
[ 0.000000] efi: mem82: type=9, attr=0xf, range=[0x00000000da8dd000-0x00000000da8e1000) (0MB)
[ 0.000000] efi: mem83: type=9, attr=0xf, range=[0x00000000da8e1000-0x00000000da8e2000) (0MB)
[ 0.000000] efi: mem84: type=4, attr=0xf, range=[0x00000000da8e2000-0x00000000da8e3000) (0MB)
[ 0.000000] efi: mem85: type=10, attr=0xf, range=[0x00000000da8e3000-0x00000000da926000) (0MB)
[ 0.000000] efi: mem86: type=4, attr=0xf, range=[0x00000000da926000-0x00000000daa70000) (1MB)
[ 0.000000] efi: mem87: type=3, attr=0xf, range=[0x00000000daa70000-0x00000000dad06000) (2MB)
[ 0.000000] efi: mem88: type=4, attr=0xf, range=[0x00000000dad06000-0x00000000dad0b000) (0MB)
[ 0.000000] efi: mem89: type=3, attr=0xf, range=[0x00000000dad0b000-0x00000000dad0f000) (0MB)
[ 0.000000] efi: mem90: type=4, attr=0xf, range=[0x00000000dad0f000-0x00000000dad1c000) (0MB)
[ 0.000000] efi: mem91: type=3, attr=0xf, range=[0x00000000dad1c000-0x00000000dad2e000) (0MB)
[ 0.000000] efi: mem92: type=4, attr=0xf, range=[0x00000000dad2e000-0x00000000dad35000) (0MB)
[ 0.000000] efi: mem93: type=6, attr=0x800000000000000f, range=[0x00000000dad35000-0x00000000daff4000) (2MB)
[ 0.000000] efi: mem94: type=4, attr=0xf, range=[0x00000000daff4000-0x00000000db000000) (0MB)
[ 0.000000] efi: mem95: type=7, attr=0xf, range=[0x0000000100000000-0x000000011f200000) (498MB)
[ 0.000000] efi: mem96: type=0, attr=0x8000000000000000, range=[0x00000000dbc00000-0x00000000dfe00000) (66MB)
[ 0.000000] efi: mem97: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem98: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem99: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.204 05/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x11f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0DBC00000 mask FFFC00000 uncachable
[ 0.000000] 5 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 6 base 11F400000 mask FFFC00000 uncachable
[ 0.000000] 7 base 11F200000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd780] fd780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[ 0.000000] 0000000000 - 00db000000 page 2M
[ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000011f200000
[ 0.000000] 0100000000 - 011f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 11f200000 @ d97b5000-d97bb000
[ 0.000000] RAMDISK: 37556000 - 37aa3000
[ 0.000000] ACPI: RSDP 00000000da8b0000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000da8b0090 0009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000da8c2058 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000da8b01c0 11E96 (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000da8daf80 00040
[ 0.000000] ACPI: APIC 00000000da8c2150 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000da8c21c8 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000da8c2210 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000da8c22d8 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000da8c2318 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c2d58 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c3a00 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000da8c3a98 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000da8c43b8 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000da8c4530 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000da8c4568 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000da8c4df0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000da8c5888 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 00000000da8c5940 00038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000011f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000011f200000
[ 0.000000] NODE_DATA [000000011f1fc000 - 000000011f1fffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011a800000-ffff88011e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0011f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000d97e5
[ 0.000000] 0: 0x000d9de9 -> 0x000d9dfe
[ 0.000000] 0: 0x000d9e04 -> 0x000d9e06
[ 0.000000] 0: 0x000d9e0b -> 0x000d9f64
[ 0.000000] 0: 0x000d9f68 -> 0x000d9fa7
[ 0.000000] 0: 0x000d9fae -> 0x000d9fb0
[ 0.000000] 0: 0x000d9fce -> 0x000d9fd1
[ 0.000000] 0: 0x000d9fd3 -> 0x000d9fea
[ 0.000000] 0: 0x000d9ff0 -> 0x000d9ff8
[ 0.000000] 0: 0x000d9ff9 -> 0x000da008
[ 0.000000] 0: 0x000da009 -> 0x000da014
[ 0.000000] 0: 0x000da019 -> 0x000da037
[ 0.000000] 0: 0x000da039 -> 0x000da04d
[ 0.000000] 0: 0x000da04e -> 0x000da060
[ 0.000000] 0: 0x000da086 -> 0x000da09a
[ 0.000000] 0: 0x000da09b -> 0x000da09c
[ 0.000000] 0: 0x000da09e -> 0x000da09f
[ 0.000000] 0: 0x000da0a4 -> 0x000da0b9
[ 0.000000] 0: 0x000da8e2 -> 0x000da8e3
[ 0.000000] 0: 0x000da926 -> 0x000dad35
[ 0.000000] 0: 0x000daff4 -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0011f200
[ 0.000000] On node 0 totalpages: 1019371
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 871580 pages, LIFO batch:31
[ 0.000000] Normal zone: 1992 pages used for memmap
[ 0.000000] Normal zone: 125496 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000d97e5000 - 00000000d9de6000
[ 0.000000] PM: Registered nosave memory: 00000000d9de6000 - 00000000d9de9000
[ 0.000000] PM: Registered nosave memory: 00000000d9dfe000 - 00000000d9e04000
[ 0.000000] PM: Registered nosave memory: 00000000d9e06000 - 00000000d9e0b000
[ 0.000000] PM: Registered nosave memory: 00000000d9f64000 - 00000000d9f68000
[ 0.000000] PM: Registered nosave memory: 00000000d9fa7000 - 00000000d9fae000
[ 0.000000] PM: Registered nosave memory: 00000000d9fb0000 - 00000000d9fce000
[ 0.000000] PM: Registered nosave memory: 00000000d9fd1000 - 00000000d9fd3000
[ 0.000000] PM: Registered nosave memory: 00000000d9fea000 - 00000000d9ff0000
[ 0.000000] PM: Registered nosave memory: 00000000d9ff8000 - 00000000d9ff9000
[ 0.000000] PM: Registered nosave memory: 00000000da008000 - 00000000da009000
[ 0.000000] PM: Registered nosave memory: 00000000da014000 - 00000000da019000
[ 0.000000] PM: Registered nosave memory: 00000000da037000 - 00000000da039000
[ 0.000000] PM: Registered nosave memory: 00000000da04d000 - 00000000da04e000
[ 0.000000] PM: Registered nosave memory: 00000000da060000 - 00000000da086000
[ 0.000000] PM: Registered nosave memory: 00000000da09a000 - 00000000da09b000
[ 0.000000] PM: Registered nosave memory: 00000000da09c000 - 00000000da09e000
[ 0.000000] PM: Registered nosave memory: 00000000da09f000 - 00000000da0a4000
[ 0.000000] PM: Registered nosave memory: 00000000da0b9000 - 00000000da65d000
[ 0.000000] PM: Registered nosave memory: 00000000da65d000 - 00000000da8dd000
[ 0.000000] PM: Registered nosave memory: 00000000da8dd000 - 00000000da8e2000
[ 0.000000] PM: Registered nosave memory: 00000000da8e3000 - 00000000da926000
[ 0.000000] PM: Registered nosave memory: 00000000dad35000 - 00000000daff4000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dbc00000
[ 0.000000] PM: Registered nosave memory: 00000000dbc00000 - 00000000dfe00000
[ 0.000000] PM: Registered nosave memory: 00000000dfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfe00000 (gap: dfe00000:18200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000984
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/vols-vroot ro cryptdevice=/dev/sda3:encdev:allow-discards quiet add_efi_memmap elevator=noop
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3749436k/4704256k available (4538k kernel code, 626772k absent, 328048k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.065 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.46 BogoMIPS (lpj=5653550)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000027] init_memory_mapping: 00000000dbc00000-00000000dfe00000
[ 0.000031] 00dbc00000 - 00dfe00000 page 2M
[ 0.151052] Security Framework initialized
[ 0.151060] AppArmor: AppArmor disabled by boot time parameter
[ 0.151411] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.152933] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153609] Mount-cache hash table entries: 256
[ 0.153820] Initializing cgroup subsys cpuacct
[ 0.153823] Initializing cgroup subsys memory
[ 0.153832] Initializing cgroup subsys devices
[ 0.153834] Initializing cgroup subsys freezer
[ 0.153836] Initializing cgroup subsys net_cls
[ 0.153838] Initializing cgroup subsys blkio
[ 0.153874] CPU: Physical Processor ID: 0
[ 0.153875] CPU: Processor Core ID: 0
[ 0.153882] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153883] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154440] mce: CPU supports 7 MCE banks
[ 0.154456] CPU0: Thermal monitoring enabled (TM1)
[ 0.154464] using mwait in idle threads.
[ 0.155854] ACPI: Core revision 20120320
[ 0.172956] ftrace: allocating 17824 entries in 70 pages
[ 0.186631] DMAR: Host address width 36
[ 0.186634] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.186647] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.186650] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.186661] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.186663] DMAR: RMRR base: 0x000000da3af000 end: 0x000000da3cbfff
[ 0.186666] DMAR: RMRR base: 0x000000dbc00000 end: 0x000000dfdfffff
[ 0.186743] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.186745] HPET id 0 under DRHD base 0xfed91000
[ 0.186954] Enabled IRQ remapping in x2apic mode
[ 0.186956] Enabling x2apic
[ 0.186958] Enabled x2apic
[ 0.186967] Switched APIC routing to cluster x2apic.
[ 0.187451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220416] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.324902] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.324909] ... version: 3
[ 0.324910] ... bit width: 48
[ 0.324912] ... generic registers: 4
[ 0.324914] ... value mask: 0000ffffffffffff
[ 0.324916] ... max period: 000000007fffffff
[ 0.324917] ... fixed-purpose events: 3
[ 0.324919] ... event mask: 000000070000000f
[ 0.344968] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.364889] Booting Node 0, Processors #1
[ 0.378630] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391536] #2
[ 0.405332] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418168] #3 Ok.
[ 0.431901] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.431937] Brought up 4 CPUs
[ 0.431939] Total of 4 processors activated (13573.87 BogoMIPS).
[ 0.436493] devtmpfs: initialized
[ 0.437768] PM: Registering ACPI NVS region [mem 0xd97e5000-0xd9de5fff] (6295552 bytes)
[ 0.437873] PM: Registering ACPI NVS region [mem 0xda65d000-0xda8dcfff] (2621440 bytes)
[ 0.437918] PM: Registering ACPI NVS region [mem 0xda8e3000-0xda925fff] (274432 bytes)
[ 0.438826] NET: Registered protocol family 16
[ 0.438966] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.438969] ACPI: bus type pci registered
[ 0.439040] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439044] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488460] PCI: Using configuration type 1 for base access
[ 0.489097] bio: create slab <bio-0> at 0
[ 0.489161] ACPI: Added _OSI(Module Device)
[ 0.489163] ACPI: Added _OSI(Processor Device)
[ 0.489165] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489168] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492211] ACPI: EC: EC description table is found, configuring boot EC
[ 0.495384] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.500091] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.500635] ACPI: SSDT 00000000da60a018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.501405] ACPI: Dynamic OEM Table Load:
[ 0.501409] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.501770] ACPI: SSDT 00000000da60ba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.502576] ACPI: Dynamic OEM Table Load:
[ 0.502579] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.502752] ACPI: SSDT 00000000da60cc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.503510] ACPI: Dynamic OEM Table Load:
[ 0.503513] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.504368] ACPI: Interpreter enabled
[ 0.504373] ACPI: (supports S0 S3 S4 S5)
[ 0.504406] ACPI: Using IOAPIC for interrupt routing
[ 0.512510] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.512789] ACPI: No dock devices found.
[ 0.512794] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.513213] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.513809] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.513812] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.513815] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.513818] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.513821] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.513823] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.513826] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.513829] pci_root PNP0A08:00: host bridge window [mem 0xdfe00000-0xfeafffff]
[ 0.513867] PCI host bridge to bus 0000:00
[ 0.513870] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.513873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.513875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.513878] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.513880] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.513883] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.513885] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.513888] pci_bus 0000:00: root bus resource [mem 0xdfe00000-0xfeafffff]
[ 0.513899] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.513952] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.513968] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.513977] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.513985] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.514032] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.514046] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.514135] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.514163] pci 0000:00:14.0: reg 10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[ 0.514257] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.514289] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.514320] pci 0000:00:16.0: reg 10: [mem 0xf7d22000-0xf7d2200f 64bit]
[ 0.514413] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.514463] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.514489] pci 0000:00:1a.0: reg 10: [mem 0xf7d20000-0xf7d203ff]
[ 0.514599] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.514632] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.514654] pci 0000:00:1b.0: reg 10: [mem 0xf7d18000-0xf7d1bfff 64bit]
[ 0.514739] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.514775] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.514909] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.514948] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.515082] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.515141] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.515168] pci 0000:00:1d.0: reg 10: [mem 0xf7d1f000-0xf7d1f3ff]
[ 0.515282] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.515316] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.515466] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.515490] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.515500] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.515512] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.515522] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.515532] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.515542] pci 0000:00:1f.2: reg 24: [mem 0xf7d1e000-0xf7d1e7ff]
[ 0.515605] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.515629] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.515651] pci 0000:00:1f.3: reg 10: [mem 0xf7d1d000-0xf7d1d0ff 64bit]
[ 0.515682] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.515732] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.515758] pci 0000:00:1f.6: reg 10: [mem 0xf7d1c000-0xf7d1cfff 64bit]
[ 0.515922] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.516173] pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
[ 0.516366] pci 0000:02:00.0: reg 10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.517198] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.521918] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.521928] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.521957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.522122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.522161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.522339] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.522604] pci0000:00: ACPI _OSC control (0x18) granted
[ 0.528361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.528420] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 0.528480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 0.528531] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 0.528584] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.528635] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.528687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 0.528737] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 0.528831] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.528838] vgaarb: loaded
[ 0.528839] vgaarb: bridge control possible 0000:00:02.0
[ 0.528883] PCI: Using ACPI for IRQ routing
[ 0.530787] PCI: pci_cache_line_size set to 64 bytes
[ 0.530797] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.530873] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.530876] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 0.530879] reserve RAM buffer: 00000000d97e5000 - 00000000dbffffff
[ 0.530891] reserve RAM buffer: 00000000d9dfe000 - 00000000dbffffff
[ 0.530903] reserve RAM buffer: 00000000d9e06000 - 00000000dbffffff
[ 0.530914] reserve RAM buffer: 00000000d9f64000 - 00000000dbffffff
[ 0.530925] reserve RAM buffer: 00000000d9fa7000 - 00000000dbffffff
[ 0.530936] reserve RAM buffer: 00000000d9fb0000 - 00000000dbffffff
[ 0.530946] reserve RAM buffer: 00000000d9fd1000 - 00000000dbffffff
[ 0.530956] reserve RAM buffer: 00000000d9fea000 - 00000000dbffffff
[ 0.530966] reserve RAM buffer: 00000000d9ff8000 - 00000000dbffffff
[ 0.530975] reserve RAM buffer: 00000000da008000 - 00000000dbffffff
[ 0.530984] reserve RAM buffer: 00000000da014000 - 00000000dbffffff
[ 0.530993] reserve RAM buffer: 00000000da037000 - 00000000dbffffff
[ 0.531001] reserve RAM buffer: 00000000da04d000 - 00000000dbffffff
[ 0.531008] reserve RAM buffer: 00000000da060000 - 00000000dbffffff
[ 0.531015] reserve RAM buffer: 00000000da09a000 - 00000000dbffffff
[ 0.531022] reserve RAM buffer: 00000000da09c000 - 00000000dbffffff
[ 0.531028] reserve RAM buffer: 00000000da09f000 - 00000000dbffffff
[ 0.531033] reserve RAM buffer: 00000000da0b9000 - 00000000dbffffff
[ 0.531038] reserve RAM buffer: 00000000da8e3000 - 00000000dbffffff
[ 0.531042] reserve RAM buffer: 00000000dad35000 - 00000000dbffffff
[ 0.531045] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
[ 0.531048] reserve RAM buffer: 000000011f200000 - 000000011fffffff
[ 0.531151] NetLabel: Initializing
[ 0.531153] NetLabel: domain hash size = 128
[ 0.531155] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.531169] NetLabel: unlabeled traffic allowed by default
[ 0.531194] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.531202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.533219] Switching to clocksource hpet
[ 0.539356] pnp: PnP ACPI init
[ 0.539371] ACPI: bus type pnp registered
[ 0.539727] pnp 00:00: [bus 00-3e]
[ 0.539735] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.539737] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.539739] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.539742] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.539744] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.539747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.539749] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.539751] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.539754] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.539756] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.539759] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.539761] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.539763] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.539766] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.539768] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.539770] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.539773] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.539775] pnp 00:00: [mem 0xdfe00000-0xfeafffff window]
[ 0.539777] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.539852] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.539883] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.539934] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.539938] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.540008] pnp 00:02: [io 0x0000-0x001f]
[ 0.540010] pnp 00:02: [io 0x0081-0x0091]
[ 0.540012] pnp 00:02: [io 0x0093-0x009f]
[ 0.540014] pnp 00:02: [io 0x00c0-0x00df]
[ 0.540016] pnp 00:02: [dma 4]
[ 0.540049] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.540058] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.540087] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.540186] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.540219] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.540233] pnp 00:05: [io 0x002e-0x002f]
[ 0.540235] pnp 00:05: [io 0x004e-0x004f]
[ 0.540237] pnp 00:05: [io 0x0061]
[ 0.540239] pnp 00:05: [io 0x0063]
[ 0.540241] pnp 00:05: [io 0x0065]
[ 0.540243] pnp 00:05: [io 0x0067]
[ 0.540245] pnp 00:05: [io 0x0070]
[ 0.540246] pnp 00:05: [io 0x0080]
[ 0.540248] pnp 00:05: [io 0x0092]
[ 0.540250] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.540252] pnp 00:05: [io 0x0680-0x069f]
[ 0.540254] pnp 00:05: [io 0x0200-0x020f]
[ 0.540256] pnp 00:05: [io 0xffff]
[ 0.540258] pnp 00:05: [io 0xffff]
[ 0.540260] pnp 00:05: [io 0x0400-0x0453]
[ 0.540264] pnp 00:05: [io 0x0458-0x047f]
[ 0.540266] pnp 00:05: [io 0x0500-0x057f]
[ 0.540268] pnp 00:05: [io 0x164e-0x164f]
[ 0.540315] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.540318] system 00:05: [io 0x0200-0x020f] has been reserved
[ 0.540320] system 00:05: [io 0xffff] has been reserved
[ 0.540323] system 00:05: [io 0xffff] has been reserved
[ 0.540326] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.540328] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.540331] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.540334] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.540338] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540348] pnp 00:06: [io 0x0070-0x0077]
[ 0.540362] pnp 00:06: [irq 8]
[ 0.540395] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.540427] pnp 00:07: [io 0x0454-0x0457]
[ 0.540471] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.540474] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.540502] pnp 00:08: [io 0x0010-0x001f]
[ 0.540504] pnp 00:08: [io 0x0022-0x003f]
[ 0.540506] pnp 00:08: [io 0x0044-0x005f]
[ 0.540508] pnp 00:08: [io 0x0072-0x007f]
[ 0.540510] pnp 00:08: [io 0x0080]
[ 0.540512] pnp 00:08: [io 0x0084-0x0086]
[ 0.540514] pnp 00:08: [io 0x0088]
[ 0.540516] pnp 00:08: [io 0x008c-0x008e]
[ 0.540518] pnp 00:08: [io 0x0090-0x009f]
[ 0.540520] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.540522] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.540524] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.540571] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.540575] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.540584] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.540593] pnp 00:09: [irq 13]
[ 0.540627] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.540680] pnp 00:0a: [irq 12]
[ 0.540716] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.540743] pnp 00:0b: [io 0x0060]
[ 0.540745] pnp 00:0b: [io 0x0064]
[ 0.540752] pnp 00:0b: [irq 1]
[ 0.540788] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.541018] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.541020] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 0.541022] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 0.541024] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 0.541027] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 0.541029] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 0.541031] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 0.541033] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 0.541035] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 0.541038] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.541040] pnp 00:0c: [mem 0xdfe00000-0xdfe00fff]
[ 0.541103] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.541106] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.541109] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.541112] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.541116] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.541119] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.541122] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.541125] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.541128] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.541131] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.541134] system 00:0c: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.541138] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541211] pnp 00:0d: [mem 0xdfe00000-0xdfe00fff]
[ 0.541274] system 00:0d: [mem 0xdfe00000-0xdfe00fff] has been reserved
[ 0.541278] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541430] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 0.541433] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 0.541495] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 0.541497] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 0.541501] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.541534] pnp: PnP ACPI: found 15 devices
[ 0.541536] ACPI: ACPI bus type pnp unregistered
[ 0.548333] pci 0000:00:04.0: BAR 0: assigned [mem 0xdfe08000-0xdfe0ffff 64bit]
[ 0.548340] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.548357] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.548364] pci 0000:00:1c.1: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.548408] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.548411] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.548413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.548416] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.548418] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.548421] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.548424] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.548426] pci_bus 0000:00: resource 11 [mem 0xdfe00000-0xfeafffff]
[ 0.548429] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.548474] NET: Registered protocol family 2
[ 0.548608] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.549403] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.550900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.551049] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.551052] TCP: reno registered
[ 0.551067] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.551086] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.551175] NET: Registered protocol family 1
[ 0.551191] pci 0000:00:02.0: Boot video device
[ 0.586597] PCI: CLS 64 bytes, default 64
[ 0.586642] Unpacking initramfs...
[ 0.718182] Freeing initrd memory: 5428k freed
[ 0.718943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.718947] Placing 64MB software IO TLB between ffff8800ca792000 - ffff8800ce792000
[ 0.718950] software IO TLB at phys 0xca792000 - 0xce792000
[ 0.719520] audit: initializing netlink socket (disabled)
[ 0.719531] type=2000 audit(1342675392.609:1): initialized
[ 0.719886] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.721809] VFS: Disk quotas dquot_6.5.2
[ 0.721861] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.721987] msgmni has been set to 7684
[ 0.722183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.722218] io scheduler noop registered (default)
[ 0.722221] io scheduler deadline registered
[ 0.722279] io scheduler cfq registered
[ 0.722575] efifb: probing for efifb
[ 0.725055] efifb: framebuffer at 0xe0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 0.725058] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.725060] efifb: scrolling: redraw
[ 0.725063] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.727405] Console: switching to colour frame buffer device 128x48
[ 0.729621] fb0: EFI VGA frame buffer device
[ 0.729628] intel_idle: does not run on family 6 model 58
[ 0.729660] GHES: HEST is not enabled!
[ 0.729740] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.730316] Linux agpgart interface v0.103
[ 0.730401] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.732007] i8042: Detected active multiplexing controller, rev 1.1
[ 0.732785] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.732815] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.732839] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.732863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.732884] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.732989] mousedev: PS/2 mouse device common for all mice
[ 0.733073] rtc_cmos 00:06: RTC can wake from S4
[ 0.733238] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.733268] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.733278] cpuidle: using governor ladder
[ 0.733280] cpuidle: using governor menu
[ 0.733411] TCP: cubic registered
[ 0.733520] NET: Registered protocol family 10
[ 0.733728] NET: Registered protocol family 17
[ 0.733733] Registering the dns_resolver key type
[ 0.733877] PM: Hibernation image not present or could not be loaded.
[ 0.733883] registered taskstats version 1
[ 0.734299] rtc_cmos 00:06: setting system clock to 2012-07-19 05:23:13 UTC (1342675393)
[ 0.734449] Initializing network drop monitor service
[ 0.736068] Freeing unused kernel memory: 740k freed
[ 0.736186] Write protecting the kernel read-only data: 8192k
[ 0.741922] Freeing unused kernel memory: 1588k freed
[ 0.744508] Freeing unused kernel memory: 640k freed
[ 0.752904] systemd-udevd[48]: starting version 186
[ 0.755540] SCSI subsystem initialized
[ 0.757022] libata version 3.00 loaded.
[ 0.757753] ahci 0000:00:1f.2: version 3.0
[ 0.757857] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.757916] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.757920] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.757927] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.760754] scsi0 : ahci
[ 0.760973] scsi1 : ahci
[ 0.761219] scsi2 : ahci
[ 0.761696] scsi3 : ahci
[ 0.761814] scsi4 : ahci
[ 0.762047] scsi5 : ahci
[ 0.762660] ata1: SATA max UDMA/133 abar m2048@0xf7d1e000 port 0xf7d1e100 irq 42
[ 0.762664] ata2: DUMMY
[ 0.762665] ata3: DUMMY
[ 0.762667] ata4: DUMMY
[ 0.762668] ata5: DUMMY
[ 0.762670] ata6: DUMMY
[ 0.766691] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.079319] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.090674] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.090818] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.090822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.101189] ata1.00: ATA-8: ADATA XM11 128GB, 5.0.1, max UDMA/133
[ 1.101208] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.110592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.110759] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.110763] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.121163] ata1.00: configured for UDMA/133
[ 1.121291] scsi 0:0:0:0: Direct-Access ATA ADATA XM11 128GB 5.0. PQ: 0 ANSI: 5
[ 1.123017] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.123090] sd 0:0:0:0: [sda] Write Protect is off
[ 1.123095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.123119] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.123778] usbcore: registered new interface driver usbfs
[ 1.123805] usbcore: registered new interface driver hub
[ 1.123854] usbcore: registered new device driver usb
[ 1.124316] sda: sda1 sda2 sda3
[ 1.124612] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.125369] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.125376] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.125423] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.125529] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.125550] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7d00000
[ 1.125619] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.125765] xHCI xhci_add_endpoint called for root hub
[ 1.125769] xHCI xhci_check_bandwidth called for root hub
[ 1.125819] hub 1-0:1.0: USB hub found
[ 1.125832] hub 1-0:1.0: 4 ports detected
[ 1.126030] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.126038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.126165] xHCI xhci_add_endpoint called for root hub
[ 1.126169] xHCI xhci_check_bandwidth called for root hub
[ 1.126239] hub 2-0:1.0: USB hub found
[ 1.126251] hub 2-0:1.0: 4 ports detected
[ 1.129851] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.129926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.129933] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.129954] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.129988] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.133867] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.133883] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7d20000
[ 1.142574] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.142727] hub 3-0:1.0: USB hub found
[ 1.142731] hub 3-0:1.0: 2 ports detected
[ 1.142859] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.142866] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.142879] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.142914] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.146795] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.146814] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7d1f000
[ 1.155902] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.156064] hub 4-0:1.0: USB hub found
[ 1.156069] hub 4-0:1.0: 2 ports detected
[ 1.161829] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.162274] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.164964] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.165093] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.167496] [drm] Initialized drm 1.1.0 20060810
[ 1.168381] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.179358] ACPI: Lid Switch [LID]
[ 1.179416] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.179422] ACPI: Power Button [PWRB]
[ 1.179469] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.179474] ACPI: Sleep Button [SLPB]
[ 1.183098] i915 0000:00:02.0: setting latency timer to 64
[ 1.398826] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.398830] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.399105] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.399167] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.399169] [drm] Driver supports precise vblank timestamp query.
[ 1.399738] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.482168] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 1.499154] usb 1-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.499163] usb 1-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.605348] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 1.718541] Refined TSC clocksource calibration: 1696.146 MHz.
[ 1.718545] Switching to clocksource tsc
[ 1.729014] hub 3-1:1.0: USB hub found
[ 1.729085] hub 3-1:1.0: 6 ports detected
[ 1.835066] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.958735] hub 4-1:1.0: USB hub found
[ 1.958810] hub 4-1:1.0: 6 ports detected
[ 2.025002] usb 3-1.2: new high-speed USB device number 3 using ehci_hcd
[ 2.224762] usb 4-1.5: new high-speed USB device number 3 using ehci_hcd
[ 2.474462] usb 4-1.6: new full-speed USB device number 4 using ehci_hcd
[ 2.667462] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.173881] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 3.173885] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 3.173902] Console: switching to colour dummy device 80x25
[ 3.175315] fbcon: inteldrmfb (fb0) is primary device
[ 4.162812] Console: switching to colour frame buffer device 240x67
[ 4.168648] fb0: inteldrmfb frame buffer device
[ 4.168650] drm: registered panic notifier
[ 4.170494] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 4.170803] acpi device:35: registered as cooling_device0
[ 4.171244] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 4.171252] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.171274] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.261463] device-mapper: uevent: version 1.0.3
[ 4.261618] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 7.530172] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 7.671884] systemd-udevd[206]: starting version 186
[ 7.701027] ACPI: Requesting acpi_cpufreq
[ 7.708519] Monitor-Mwait will be used to enter C-1 state
[ 7.708550] Monitor-Mwait will be used to enter C-2 state
[ 7.708563] ACPI: acpi_idle registered with cpuidle
[ 7.765552] ACPI: AC Adapter [AC0] (on-line)
[ 7.792019] ACPI: Battery Slot [BAT0] (battery present)
[ 7.842020] wmi: Mapper loaded
[ 7.849215] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.849223] ACPI: Thermal Zone [THRM] (54 C)
[ 7.856172] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.856873] mei 0000:00:16.0: setting latency timer to 64
[ 7.857061] mei 0000:00:16.0: irq 45 for MSI/MSI-X
[ 7.867562] iTCO_vendor_support: vendor-support=0
[ 7.870231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.870413] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 7.878227] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.880017] cfg80211: Calling CRDA to update world regulatory domain
[ 7.887026] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
[ 7.887035] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2 (20120320/utaddress-251)
[ 7.887041] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.890845] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 7.895102] usbcore: registered new interface driver uas
[ 7.897297] Initializing USB Mass Storage driver...
[ 7.897383] scsi6 : usb-storage 1-2:1.0
[ 7.897494] usbcore: registered new interface driver usb-storage
[ 7.897496] USB Mass Storage support registered.
[ 7.905414] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.908378] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 7.908380] Copyright(c) 2003-2012 Intel Corporation
[ 7.908463] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 7.908465] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900040c8000
[ 7.908467] iwlwifi 0000:02:00.0: HW Revision ID = 0x24
[ 7.908564] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[ 7.909834] Linux media interface: v0.10
[ 7.912145] Linux video capture interface: v2.00
[ 7.912309] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.916365] scsi7 : SCSI emulation for RTS5139 USB card reader
[ 7.924679] scsi 7:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 7.926600] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
[ 7.927768] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 7.927991] Bluetooth: Core ver 2.16
[ 7.928007] NET: Registered protocol family 31
[ 7.928009] Bluetooth: HCI device and connection manager initialized
[ 7.928012] Bluetooth: HCI socket layer initialized
[ 7.928014] Bluetooth: L2CAP socket layer initialized
[ 7.928025] Bluetooth: SCO socket layer initialized
[ 7.929593] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.930401] usbcore: registered new interface driver rts5139
[ 7.932134] usbcore: registered new interface driver btusb
[ 7.938575] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input6
[ 7.939734] usbcore: registered new interface driver uvcvideo
[ 7.939737] USB Video Class driver (1.1.1)
[ 7.959022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.960155] asus_wmi: ASUS WMI generic driver loaded
[ 7.961792] asus_wmi: Initialization: 0x1
[ 7.961840] asus_wmi: BIOS WMI version: 7.9
[ 7.962148] asus_wmi: SFUN value: 0x4a2877
[ 7.963015] asus_wmi: Can't find DSTS
[ 7.968179] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 7.968413] iwlwifi 0000:02:Hi, I bought the UX32VD a few weeks ago. Most of the steps, mentioned in the article about the UX31A apply to the UX32VD too. I don't know what your problems are. All the steps are explained.
[ 8.039202] asus_wmi: Can't find DSTS
Just patch the kernel with the mentioned fix, or use the dkms variant. This will fix the can't find DSTS issue. After that, the asus-nb-wmi (or sth. like that) module will be loaded successfully, which makes most of the function keys work (except the screen brightness keys). The only thing remaining is to use the supplied hackarounds to be able to change the screenbrightness.
After these steps, I created a .Xmodmap to remap the automatic kbd. backlight key and the touchpad disable key to XF86MonBrightnessDown (or so .. can't remember the exact name) and XF86MonBrightnessUp and respectively mapped the shortcuts with xfce4-keyboard-settings (XF86MonBrightnessDown to the command backlight down, XF86MonBrightnessUp to backlight up). Unfortunately, sometimes this is a little bit buggy. The scan codes change randomly on some reboots, eg: one time it gets recognized as XF86MonBrightnessUp, and a few keypresses later as something different.
Hope they fix this issue with the 3.5 kernel, and eventually get the actual screenbrightness buttons to work. -
Why Light & Function Keys no longer working?
Function keys from F1 through F5 do not workon my Macbook. All others do, including the F12 Dashboard command. They did work before I cloned my prior laptop configuration onto the Macbook.
I was wondering if there was a way to fix this, such as reinstalling the system.
Thank you for the help.did your prior laptop have the same function key configuration for f1 through f5? if not then you'll probably going to need to reinstall os x and use the migration assistant in order to get all functions working correctly on the macbook.
Martin's explanation sounds more likely to work for you, so definitely check that out first.
Message was edited by: walter9258 -
Some function keys on wireless keyboard not working on iphone 4
I'm having trouble with the brightness and volume keys on my wireless keyboard when its paired with my iphone 4. They won't respond at all. Any fixes? i'm on version 4.3.5
Since the wireless aluminum keyboard was originally intended for personal computer use, I don't believe any of the function keys will work for your iPhone or even an iPad device.
-
Function key actions not working
I’m using Illustrator CC (v. 17.1.0) on an iMac. For ages, I’ve had actions set up. I have function key strokes attached to those actions. Just recently, they stopped working the way I want them to. For example, I have an action where I select text. The action changes the size of the text, and the color. Now, I get the error “The object 'Set color' is not currently available.”
Another example is an action where I center three items along a horizontal line and group them. When I run that action now, I get the message, “The object ‘Alignment’ is not currently available.”
When I recreate the actions (and then the function keystrokes) it works fine. Same exact steps. But I have to recreate my actions/assign function keys literally ever time I re-open illustrator. This is a huge pain. I’ve noticed the actions I have set up that DON’T have keystrokes work fine. So somehow it’s tied to the keystrokes, I think. How can I fix this, as I LOVE having the function key strokes!
julieHi Keany,
I already had found that option because I would like to use directly the standard F1/F12 functions and not the special functions (as default setting by Toshiba). When I want to change for example brightness I now press Fn+ F2 (brightness down) or Fn + F3 (brightness up).
The Fn+ F12 key nicely toggles the WiFi on or Off. I now understand that the way Toshiba displays this is not the same as with Windows 7?
However I still have difficulties on how to switch on/off Bluetooth, that in my memory was done using the same functionkey (+Fn) ? I can't get it on.
I there someone who can tell me? At the moment I only see 2 states when toggling with Fn+ F12, WiFi on or WiFi off. -
Function keys not registering with Spaces?
I just noticed that F10 no longer does the spaces expose. I can the function key to F11 and it still does nothing. It's not interfering with any regular expose, I checked. The key itself is not stuck because when I switch any other expose function to it it works just fine.
I have spaces turned on and if I click on the spaces icon in applications it does the expose. Spaces is still on and Ctrl + Arrow still moves between them, so I know spaces is working. I just noticed it now, it might have happened during the last update (it was iTunes I think)
I searched and didn't find anything, so I doubt it was the update, I think it's just my computer. Little help?I've been having a similar problem- I set the shortcut keys for Expose, and then after a reboot it will have lost them.
I'm also running spaces too.
Thanks for posting this- I hope there's a fix! -
ITunes Media Function Keys Not Working
So I picked up a new MacBook Pro Retina 13" a week or so ago, and it's going great so far, except for one thing. It seems that the Media function keys aren't working in iTunes?
I checked under the keyboard preferences to ensure the "standard function" keys box wasn't checked, and it wasn't. All the other functions keys are working properly except the back, play/pause, and skip keys. I tested the keys with other functions, such as setting a shortcut to the F8 key, and it recognized the input, so its not a hardware issue.
I tried to find help elsewhere, but most people seemingly just had that box in the settings checked, which wasn't the problem for me it seems.
Any suggestions?lions99 wrote:
Hey guys,
I see that most of you are having a issue with the function keys.
Try this- http://goo.gl/gdlS3?
This is a hotfix for this issue. Now keep in mind this only supports
Windows 7 Enterprise
Windows 7 Home Basic
Windows 7 Home Premium
Windows 7 Professional
Windows 7 Starter
Windows 7 Ultimate
So if you don't have this, then don't run this fix.
Also, If you guys can give me your product # and complete model name of the notebook you have, so I can send you a link to update your BIOS.
Here is a link to show you how to find your product #- http://goo.gl/vYKya
THX
Thank you for your help, but another person had already answered me. =]
After I re-installed the keyboard drivers, the "fn + " keys became functional again. The driver i installed was "HP Quick Launch Buttons" or just "sp49456" if you want to know.
Thank you for your help, I am very pleased with it.
Maybe you are looking for
-
I am looking for an email app for the iPad other than Mail?
Two business people are sharing an iPad and we want to be able to both use email on the same iPad, but if we set up our Mail accounts on the iPad as I understand it, Mail may merge our contact lists. (Our email accounts are hosted by our domain regi
-
Hi, I have been unable to post Payment Order (Manual or through IDOC). The error message doesn't give any relevant information. Can you please let me know what can possible go wrong? I have checked configuration and partner profile settings and both
-
How to create bpartner base on my logon user id?
hi, I try to create a service contract and get error message that my user id is not a business partner, so how to create bpartner base on my logon user id? thanks
-
About to Purchase Macbook Pro, with reservations
I am about to purchase a Macbook Pro, but I have some reservations I wanted to level about, and get the communities opinion. I really want leopard when it is released in October, but I'm going to school, so I cant wait till then to purchase it. I've
-
Can I alter the row height in Discoverer Plus?
I know how to alter font size, but don't get a benefit without altering row height.