Thinkpad Edge E530 hangs on shutdown

Hi,
my Edge 530 fails regularly (allthough not every time) to shut down. Instead it hangs on the blue exit screen of my Windows 7 (Home Prem, SP1) and I'm forced to hold the power button down in order to shut down my system. 
Windows event viewer shows a bunch of identical reports like this one: 
ACPI thermal zone ACPI\ThermalZone\TZ01 has been enumerated.
_PSV = 368K
_TC1 = 1
_TC2 = 5
_TSP = 1000ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 373K
_HOT = 0K
_PSL - see event data.
Sometimes I get a beep and a message "fan error" on the following start up. Can this be potentially harmful and what shoud I try to do about it? 
Thanks in advance,
Juhani 

Hi Juhani,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system hangs while shutting down on your ThinkPad Edge E530.
Have you check with performing clean boot option, to proceed with this option please click here to visit the link and follow the steps from that and check it.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Thinkpad x201 frequently hangs on shutdown/r​estart

    my x201 thinkpad, with windows xp pro, service pak 3, frequently hangs on shutdown/restart and shutdown, often with multiple tabs open on firefox 3.6.13, and sometimes with only a couple of open tabs, like gmail and nyt homepage.
    when i select  windows task manager, it likewise will not close  tabs.
    advice appreciated

    campus56 wrote:
    my x201 thinkpad, with windows xp pro, service pak 3, frequently hangs on shutdown/restart and shutdown, often with multiple tabs open on firefox 3.6.13, and sometimes with only a couple of open tabs, like gmail and nyt homepage.
    when i select  windows task manager, it likewise will not close  tabs.
    advice appreciated
    This happened a long time ago when I was still using XP. There were a few possibilities, but unfortunately unable to help much as we cannot see your screen, setup, programs etc.
    Suggestion, in order of what I think is possible reasons
    1) If you have 2xRam, swap their locations and run ram diagnostic, faulty memory?
    2) Plug out your network cable and turn off wifi and do the shutdown, sympton remains?
    3) Check your firefox addson for anything that syncs, eg bookmark syncing, backup etc
    4) Download ccleaner, clean the registry and empty all the trash etc
    5) Download and use a free tool call ProcessTamer, this one works for XP, it sometimes helps regulate those CPU usuage, "idling process" or something
    6) Uninstall your java, download the latest and reinstall it. There was an add on that fouls up IE that casue all the slowness, unsure if your installation of firefox has it.

  • Thinkpad edge E530 upgrade to Win 8 pro failed

    I tried to update my E530 to Windows 8, but the instllation stops at 29%, any help?
    Solved!
    Go to Solution.

    have a look at this thread: http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Cannot-upgrade-to-win-8-pro-on-thinkpad-twist/m-p...
    you may wish to try the steps in post #2 as they seemed to have worked in a similar situation.
    regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • ThinkPad Edge E530 Please tell me what the icon means

    When I lifted my opened my laptop, there was an icon at the bottom center. The symbol was similar to a half of a sun upside-down and it was crossed out. Since I've never seen the icon before, I don't know what it means or if it's affecting anything.

    Hello and welcome,
    It sounds like it's the ThinkLight icon.  Does it look like this?  https://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Thinklight-Icon-won-t-go-away/td-p/1855652
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Thinkpad Edge E530 BIOS

    I have updated my (originally Windows 7 equipped) Thinkpad E530 to the latest BIOS version 2.55.
    I have also installed Windows 8.1 x64 on it.
    My question is: should I use the 'OS Optimized Defaults' in the BIOS or not?
    In the BIOS install descriptions, it says to use the OS Optimized Defaults on a Windows 8 (x64) pre-installed machine, and to use the regular defaults on a Windows 7 pre-installed machine.
    But my computer was a 7 pre-installed machine, but is now running Windows 8 x64. So which defaults do I need to load?
    Kind Regards,
    Psycho
    Solved!
    Go to Solution.

    Hi,
    Thank you for the reply,
    To work the system with 'OS optimized defaults', you have reinstall the Windows 8 OS after enabling to 'OS optimized defaults'. If you change the HDD partition format the OS will not work.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • проблема с ПО [ThinkPad Edge e530]

    Ноутбук thinkpad e530. После переустановки windows перестали работать индикаторы num, caps, звука и т.д. (я имею ввиду на экране, так как на ноутбуке их вообще нет). Драйвера установил (on screen display)

    Приветствую
    Драйвер Lenovo Power Management и сборка утилит Hotkey Features Integration установлены?
    ОС какая?
    x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
    x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
    Do it well, worse becomes itself
    Русскоязычное Сообщество   English Community   Deutsche Community   Comunidad en Español

  • Thinkpad Edge E530 BIOS Update went wrong

    I was updating BIOS using the utility given in Lenovo site. But it went wrong and my E530 is bricked. I'm planing to recover the BIOS using Phoenix Wincrisis .. But for that i Need the bios.wph file. I tried to extract the .wph file (using 7zip) from the Bios update .exe file given in lenovo site .. But I Cant find a .wph file in it.. It contains a [0] file.. Tried to extract that '[0]' file using 7zip. But 7zip cant open the archive. My E530 is still bricked .. Someone please help me as soon as possible. Thanks in advance

    Hi Yasarharafath,
    I am sorry for the delay in reply!
    I am glad to hear that your system is now booting after using Phoenix Wincrisis Tool. But for this new issue suggest you to check with uninstalling ACPI adapter from the device manager. Remove the battery from the system & power on the system from connecting ‘Power Adapter’. Wait till the system boot completely and then go to ‘Device Manager’ then uninstall ‘Microsoft ACPI-Compliant Control Method Battery’ under battery option. After uninstalling shutdown the system, remove ‘Power Adapter’ and insert the battery then switch ON the system and check.
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Thinkpad Edge E530 problem with GT 630M

    The problem with GT 630M in the laptop GT580 20150
    After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
    message:
    System Windows stopped this device because it has reported a problem occurs. (Code 43)
    Tried different driver from 310.?? to 321.??
    After installing the driver card is working properly. After the first reboot card stops working.
    Help solve the problem!
    Please!

    Hello,
    I managed to get bluetooth working. The problem was solved after I loaded factory defaults in BIOS.
    Now, bluetooth can be enabled by using Fn+F9, for example. 'rfkill unblock/block' also works.
    Now, I have different problem:
    Wireless and bluetooth are enabled at boot all the time (I use ubuntu 11.10). I can disable them when linux is up, but if I reboot they will be up again.
    I beleive this can be solved (workaround!) by apropriate script which would disable wifi and bluetooth at boot time.
    Proper solution would be if bios could remember last wifi/bluetooth state (that was the case before I upgraded firmware to 1.14), or to have all disabled by default.
    (Just to mention that state is preserved after suspend/resume which is good)

  • Thinkpad Edge E530. Latest monitor driver messed up HDMI-output

    As the title says, since I installed the latest driver for the monitor is the HDMI-output not working. The computer doesn't even recognize that a HDMI-cable is connected anymore. I triied reinstalling the driver, but it is still not woriking. When I reinstall Windows 8.1 completely the HDMI-output is working again, so clearly it is something wrong with the latest driver.

    I wanted to reply that I just discovered that my Lenovo AIO no longer likes my converter.  I'm not sure why as I have proven that it works by using it on another device.  The other device is a laptop running Windows 7 Pro.
    On a haunch, I plugged in my HDMI TV which has a native HDMI connection and it WORKED.  So, I suppose I'm back to the drawing board and this is indeed not a Lenovo hardware issue.
    Does anyone know of any issues with using a HDMI to VGA converter on a Lenovo B540 AIO?  Link below:
    http://www.startech.com/AV/Converters/Video/HDMI-t​o-VGA-Adapter-Converter-for-Desktop-PC-Laptop-Ultr​...
    I have the one above but I just noticed there is a HD2VGAE which I'm not sure what the difference is.
    Thanks!

  • Thinkpad edge e530 large bottom cover stripped screw

    Hi,
    I have a stripped screw on the large bottom cover caused by using the wrong screwdriver which was my fault. I am guessing warranty will not cover this issue, if not can anybody direct my to getting a new cover with screws in it, as the screws do not come out.
    Also if it makes a difference, I put in a repair request through the website, and they shipped me a box to send my laptop in, however since I am a student I NEED this laptop every day and cannot have it in repairs. 

    Just a small bump, I have the same problem with my Lenovo S440. I plugged in an m.2 SSD, closed it up. The SSD didn't seem to be connected correctly, so I tried to open it up again and 1 screw just totally warped. I did use the correct screwdriver, it's actually exactly the same one as the Lenovo engineer who repaired my laptop yesterday used. I can probably drill it out without doing any damage, but if anyone has a better solution I'd like to hear it. I'm also looking for some replacement screws (the size/type isn't mentioned in the replacement manual, but I' ve already opened at seperate topic for that). 
    I know this post is quite old, but did you by any chance find a way to take it out?

  • Edge e530 cdrom screw removal

    Hello,
    I was trying to place a 2nd hdd to my thinkpad edge e530 so I had to first remove the cdrom drive.
    However, I couldn't remove the screw that holds the cdrom which according to the manual is this type:
    M2 × 3 mm, wafer-head, nylon-coated [1]  (http://support.lenovo.com/us/en/documents/pd023403)
    I tried with the smallest screwdrivers I had, but it wouldn't turn at all and seems to have some tear on it now.
    What kind of screwdriver do I need for this? 
    Thanks for your help!

    Just a small bump, I have the same problem with my Lenovo S440. I plugged in an m.2 SSD, closed it up. The SSD didn't seem to be connected correctly, so I tried to open it up again and 1 screw just totally warped. I did use the correct screwdriver, it's actually exactly the same one as the Lenovo engineer who repaired my laptop yesterday used. I can probably drill it out without doing any damage, but if anyone has a better solution I'd like to hear it. I'm also looking for some replacement screws (the size/type isn't mentioned in the replacement manual, but I' ve already opened at seperate topic for that). 
    I know this post is quite old, but did you by any chance find a way to take it out?

  • Thinkpad edge s230u twist can't access bios by F1,bios recovery

    When I tried to update win8.1 updates KB3000850, it failed via auto-update or installation. Follow the Microsoft guide to restart laptop into safe mode, installation failed also. Then I chose safe mode with minimum way to restart laptop. Then laptop halted down at Lenovo logo.
    At first, I thought bios is modified by windows8.1(x64) and it can't load any hard disk to boot. With a couple of days test, I found a way to flash BIOS at very beginning of laptop boot. BIOS can be updated. But there is still no startup option to set boot sequence. My laptop is still halted down at Lenovo logo, same as BIOS update. I can only access bios by keeping real clock error which I generated by clearing BIOS.
    if no real clock error, i can't access bios. And f1 and f12 doesn't work. At the lonovo logo screen, Enter doesn't work also although it hints me to press Enter.
    In my laptop bios, there is no startup option even I udate it.
    can somebody help me on this? Lenovo service center just aksed me to change board.
    Here I share the bios crisis recovery solution for s230u, may also for other models.
    Laptop: ThinkPad edge s230u twist 3347-3QC
    Bios: 1.67, UEFI.
    OS:windows 8.1 x64
    How to do BIOS crisi recovery:
    1. Download bios(exe version) from Lenovo website
    2. Run it, and release file. Uncheck the installation at last. Remember the release location. You can get the bios in .fl1 format, mine is in ..\gduj21us\GDETA9WW\
    3. Rename it as BIOS.cap and copy it into a new formatted USB stick with FAT32 in root directory.
    4. Shutdown Laptop and disconnect AC cord. Insert USB stick.
    5. Hold Fn+R, plugging in AC power. And power-on.
    6. USB stick is blinking, then you can release key. A short while, after a lenovo logo, flashing screen shows.
    7. After flash, laptop will restart or shutdown.
    In BIOS, it shows new version. If new bios is new one, flashing takes a longer time than a very short time for same version flashing.

    I tried 1.02, it will try to read USB stick, then shutdown, restart, read again, laptop would be in this cycle. It's same when i changed one Bit by hex-editor of 1.69 version. I also try to use PhoenixTool 2.59 to rebuild BIOS after change one or two Bits of extracted roms. same status also, it took the changed bios as wrong input, enter the above cycle also.
    I tried 1.53, it can show lenovo logo, and flashing screen, but it hints that BIOS should be qual or newer.
    I still wait for some on guide. Thanks in advance.

  • Does Thinkpad Edge E545 have a non-stopping fan?

    I was thinking of purchasing this model:
    http://shop.lenovo.com/ae/en/laptops/thinkpad/edge-series/e545/
    I don't need anything fancy just something reliable so this would suit me fine. I mentioned it to a friend who said he bought the E530 and has regretted it ever since due to an issue with the fan. Apparently once the fan starts it doesn't stop. There is a 90-page thread about here:
    http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E530-pulsing-whiny-fan-no-low-load/td-p/797577/pa...
    I had assumed this would have just been an isolated model problem. What is concerning is that not only have Lenovo not fixed the issue but I have come across similar complaints about the next model, the E540:
    http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/E540-Fan-does-not-stop/td-p/1439657
    If the same issue is present in the next model am I wrong to assume it is also present in the E545? Can someone confirm either way plz. I am also considering a Dell Latitude which I will purchase if there is no confirmation the problem has been addressed, but I would prefer to get this model.
    Regards, Miranda.

    I set up an account just to reply to you!...and also I just bought a Lenovo Thinkpad Edge E545, and I want everyone to know what they're doing.  Plus, I'm having the same problem.  I just downloaded the Broadcom Wireless LAN (Driver here! Remember to choose for either Windows XP, 8, 8.1, or whatever you have!) and I've seen past comments that this has worked for them.  I'm about to go try it out, so wish me luck!  I hope you haven't returned that laptop you bought!  Lenovo is usually such a good brand, from what I hear, and I personally already enjoy the exterior, as I put structure, stability, and damage-resistant against style, which the Edge E545 seems to be more for the accident prone or careful type, but still cool!  Good luck!

  • Thinkpad Edge E531

    Subject Thinkpad comes up with the Lenovo screen then a BOOT MENU / APPLICATION MENU and hangs.  I select the HDD, screen goes blank and it comes back to the aforementioned screen.  I have tried F8 to try SAFE MODE but always comes back to BOOT MENU / APP MENU.
    Thank You

    Hi Jleppart,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issues with not booting to Windows on your ThinkPad Edge E531.
    The issue could be with Operating System or with HDD, suggest you to check with performing BIOS diagnose by pressing F10 key and run HDD and Memory diagnose to verify if the issue with hardware or with software.
    Hardware Maintenance Manual
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hotkeys no longer working - ThinkPad Edge 14, Windows 7

    Hello,
    my hotkeys to control volume, brightness, wifi, microphone, webcam no longer working. Some hotkeys (previous track, play/pause and next track) still works fine. I had this problem two times before and in this cases bios update helped. But now, i have newest BIOS version and i can't update BIOS...Simple restore BIOS properities to default didn't work...I have exactly the same problem on Windows 7 Professional 64bit and Ubuntu Linux 10.10 32bit. Any ideas how to fix this or i must use my warranty?
    I'll be very grateful for any advice!
    Thinkpad Edge 14 O578KNG

    f1 at startup, into the bios.  config should be highlighted, enter.  power, enter.   make sure hibernate by timer is enabled. f10 to save and exit. yes, boot to windows.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • Problem: Creating Charts in RTF Templates

    I am using BI Publisher Template Builder for Word. I am using Word 2007 and the patch 9821068 of the Template Builder. I am attempting to create a chart in an rtf template using the chart wizard. I can go through the wizard fine and preview my chart

  • AnnotatedNoClassDefFound error when using OracleXMLSQL (XSU) in oc4j 10.1.3

    This topic has been canvassed before in this forum, however, none of the replies/suggestions have worked in my case. I am running on a Solaris x86 5.10 64 bit server, oc4j is 10.1.3 standalone production, jdeveloper is 10.1.3 production. My app is us

  • Second HDD for a Probook 6570b

    I want to know if I can replace the DVD unit with a HDD, and if possible please provide that PN for the tray to install the second HDD. I am planning to have the OS on a SSD and the data files on a standard HDD. Thanks

  • 0580 infotype

    Hi All, I want to add the other sections in infotype 0580 Previous employment tax details. Can anyone plz let me know how to do this.. In the current system there are only three sections as Leave encashment,Gratuity and VRS exemption. I want to add P

  • Config Assistant Failover to boot interpreter

    Toshiba Satellite 2805-S302 PIII 750 128MB Solaris 2.8 Feb 2000 no patches loaded/Linux/NT4 This is what I am getting from boot: SunOS Secondary Boot version 3.00 Solaris Intel Platform Edition Booting System Running Configuration Assistant... error: