Thinkpad Edge E530 problem with GT 630M

The problem with GT 630M in the laptop GT580 20150
After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
message:
System Windows stopped this device because it has reported a problem occurs. (Code 43)
Tried different driver from 310.?? to 321.??
After installing the driver card is working properly. After the first reboot card stops working.
Help solve the problem!
Please!

Hello,
I managed to get bluetooth working. The problem was solved after I loaded factory defaults in BIOS.
Now, bluetooth can be enabled by using Fn+F9, for example. 'rfkill unblock/block' also works.
Now, I have different problem:
Wireless and bluetooth are enabled at boot all the time (I use ubuntu 11.10). I can disable them when linux is up, but if I reboot they will be up again.
I beleive this can be solved (workaround!) by apropriate script which would disable wifi and bluetooth at boot time.
Proper solution would be if bios could remember last wifi/bluetooth state (that was the case before I upgraded firmware to 1.14), or to have all disabled by default.
(Just to mention that state is preserved after suspend/resume which is good)

Similar Messages

Thinkpad Edge E530 hangs on shutdown

Hi,
my Edge 530 fails regularly (allthough not every time) to shut down. Instead it hangs on the blue exit screen of my Windows 7 (Home Prem, SP1) and I'm forced to hold the power button down in order to shut down my system.
Windows event viewer shows a bunch of identical reports like this one:
ACPI thermal zone ACPI\ThermalZone\TZ01 has been enumerated.
_PSV = 368K
_TC1 = 1
_TC2 = 5
_TSP = 1000ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 373K
_HOT = 0K
_PSL - see event data.
Sometimes I get a beep and a message "fan error" on the following start up. Can this be potentially harmful and what shoud I try to do about it?
Thanks in advance,
Juhani

Hi Juhani,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system hangs while shutting down on your ThinkPad Edge E530.
Have you check with performing clean boot option, to proceed with this option please click here to visit the link and follow the steps from that and check it.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

The problem with GT 630M in the laptop GT580 20150

The problem with GT 630M in the laptop GT580 20150
After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
message:
System Windows stopped this device because it has reported a problem occurs. (Code 43)
Tried different driver from 310.?? to 321.??
After installing the driver card is working properly. After the first reboot card stops working.
Help solve the problem!
Please!

The problem with GT 630M in the laptop GT580 20150
After updating the BIOS in Windows 8, and install windows 8 has stopped working NVIDIA graphics card
message:
System Windows stopped this device because it has reported a problem occurs. (Code 43)
Tried different driver from 310.?? to 321.??
After installing the driver card is working properly. After the first reboot card stops working.
Help solve the problem!
Please!

Lenovo Thinkpad edge 15 - Problem driver VGA controller with Windows XP

Hello,
I downgrade my thinkpad edge 15 from windows 7 to XP. I found all drivers on the site except the driver of VGA Controller. Where can I found it ?
Computer configuration :
ThinkPad Edge 15 (0302-47G)
Windows XP Service Pack 3
Athlon P540(2.4GHz) 2GB RAM 500GB 5400rpm HD 15.6in 1366x768 LCD ATI Radeon HD3400 CDRW/DVDRW 802.11bgn wireless Bluetooth 1Gb Ethernet UltraNav Camera 6c Li-Ion Win7 Pro 64
Thank

What do you mean it "refuses to work using bluetooth"?
The iPhone does not support bluetooth file transfer. The only thing you can use it for with any computer is tethering the internet connection from the phone. You can not sync or transfer data with your computer via bluetooth. You can sync via cable or WiFi.

Problem sending mail via 3g/edge , no problem with wifi

Hello,
I'm having problem with my iphone sending email via the 3g/edge network. When I am in wifi mode i don't have any problem.
I can receive email via 3g/edge and wifi . The problem is only sending email.
I have setup SMTP with login and password, with SSL, with pass auth and port 587
I try with port 465 and i have the same problem with 3g/edge , but no problem with wifi.
Any help please?

ok. i found the solution.
The problem is not in the iphone, the problem was DNS resolution in the server side.

Thinkpad edge E530 upgrade to Win 8 pro failed

I tried to update my E530 to Windows 8, but the instllation stops at 29%, any help?
Solved!
Go to Solution.

have a look at this thread: http://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Cannot-upgrade-to-win-8-pro-on-thinkpad-twist/m-p...
you may wish to try the steps in post #2 as they seemed to have worked in a similar situation.
regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Thinkpad edge e530 large bottom cover stripped screw

Hi,
I have a stripped screw on the large bottom cover caused by using the wrong screwdriver which was my fault. I am guessing warranty will not cover this issue, if not can anybody direct my to getting a new cover with screws in it, as the screws do not come out.
Also if it makes a difference, I put in a repair request through the website, and they shipped me a box to send my laptop in, however since I am a student I NEED this laptop every day and cannot have it in repairs.

Just a small bump, I have the same problem with my Lenovo S440. I plugged in an m.2 SSD, closed it up. The SSD didn't seem to be connected correctly, so I tried to open it up again and 1 screw just totally warped. I did use the correct screwdriver, it's actually exactly the same one as the Lenovo engineer who repaired my laptop yesterday used. I can probably drill it out without doing any damage, but if anyone has a better solution I'd like to hear it. I'm also looking for some replacement screws (the size/type isn't mentioned in the replacement manual, but I' ve already opened at seperate topic for that).
I know this post is quite old, but did you by any chance find a way to take it out?

ThinkPad Edge E530 Please tell me what the icon means

When I lifted my opened my laptop, there was an icon at the bottom center. The symbol was similar to a half of a sun upside-down and it was crossed out. Since I've never seen the icon before, I don't know what it means or if it's affecting anything.

Hello and welcome,
It sounds like it's the ThinkLight icon. Does it look like this? https://forums.lenovo.com/t5/ThinkPad-Edge-S-series/Thinklight-Icon-won-t-go-away/td-p/1855652
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Thinkpad Edge E530 BIOS

I have updated my (originally Windows 7 equipped) Thinkpad E530 to the latest BIOS version 2.55.
I have also installed Windows 8.1 x64 on it.
My question is: should I use the 'OS Optimized Defaults' in the BIOS or not?
In the BIOS install descriptions, it says to use the OS Optimized Defaults on a Windows 8 (x64) pre-installed machine, and to use the regular defaults on a Windows 7 pre-installed machine.
But my computer was a 7 pre-installed machine, but is now running Windows 8 x64. So which defaults do I need to load?
Kind Regards,
Psycho
Solved!
Go to Solution.

Hi,
Thank you for the reply,
To work the system with 'OS optimized defaults', you have reinstall the Windows 8 OS after enabling to 'OS optimized defaults'. If you change the HDD partition format the OS will not work.
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

проблема с ПО [ThinkPad Edge e530]

Ноутбук thinkpad e530. После переустановки windows перестали работать индикаторы num, caps, звука и т.д. (я имею ввиду на экране, так как на ноутбуке их вообще нет). Драйвера установил (on screen display)

Приветствую
Драйвер Lenovo Power Management и сборка утилит Hotkey Features Integration установлены?
ОС какая?
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Thinkpad Edge E530 BIOS Update went wrong

I was updating BIOS using the utility given in Lenovo site. But it went wrong and my E530 is bricked. I'm planing to recover the BIOS using Phoenix Wincrisis .. But for that i Need the bios.wph file. I tried to extract the .wph file (using 7zip) from the Bios update .exe file given in lenovo site .. But I Cant find a .wph file in it.. It contains a [0] file.. Tried to extract that '[0]' file using 7zip. But 7zip cant open the archive. My E530 is still bricked .. Someone please help me as soon as possible. Thanks in advance

Hi Yasarharafath,
I am sorry for the delay in reply!
I am glad to hear that your system is now booting after using Phoenix Wincrisis Tool. But for this new issue suggest you to check with uninstalling ACPI adapter from the device manager. Remove the battery from the system & power on the system from connecting ‘Power Adapter’. Wait till the system boot completely and then go to ‘Device Manager’ then uninstall ‘Microsoft ACPI-Compliant Control Method Battery’ under battery option. After uninstalling shutdown the system, remove ‘Power Adapter’ and insert the battery then switch ON the system and check.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

X240 - Thinkpad Ultra dock Problem with external monitors

I have tried to connect my two external monitors to the dock (the one connected to the vga port) but it was only able to detect one of them (though at a low resolution) and not the other. i have tried using a replicator to connect the screen to the dvi and the usb ports but nothing seemed to work
Did anyone face the same problem and how were they able to resolve it - any recommendation for a port replicator brand / usb to vga display adapter to use that would work?
Thanks

Seems that there is no solution now, because DP MST should be implemented in Linux: https://bugs.freedesktop.org/show_bug.cgi?id=72795

Thinkpad Edge E530. Latest monitor driver messed up HDMI-output

As the title says, since I installed the latest driver for the monitor is the HDMI-output not working. The computer doesn't even recognize that a HDMI-cable is connected anymore. I triied reinstalling the driver, but it is still not woriking. When I reinstall Windows 8.1 completely the HDMI-output is working again, so clearly it is something wrong with the latest driver.

I wanted to reply that I just discovered that my Lenovo AIO no longer likes my converter. I'm not sure why as I have proven that it works by using it on another device. The other device is a laptop running Windows 7 Pro.
On a haunch, I plugged in my HDMI TV which has a native HDMI connection and it WORKED. So, I suppose I'm back to the drawing board and this is indeed not a Lenovo hardware issue.
Does anyone know of any issues with using a HDMI to VGA converter on a Lenovo B540 AIO? Link below:
http://www.startech.com/AV/Converters/Video/HDMI-to-VGA-Adapter-Converter-for-Desktop-PC-Laptop-Ultr...
I have the one above but I just noticed there is a HD2VGAE which I'm not sure what the difference is.
Thanks!

[ThinkPad Edge S430 ] Problem between HDD, SSD, mSSD

Hello everyone, I wanna buy a S430 with 16GB mSSD.
I wanna ask, where is the windows installed? In the mSSD or HDD?
If it is installed in the mSSD, does it means that if I replace the HDD with a SSD, I will not lose the windows with lenovo features like EE3.0 but only the data stores in the pre-installed HDD?
Thanks a lot!!

Windows is installed on the HDD. The mSATA is used for caching purposes with software called ExpressCache. It makes the HDD performance faster.
If you intend to replace the HDD with SSD, then there is no purpose to buy the 16GB mSATA. The mSATA cache will not make a SSD faster.

Edge e530 cdrom screw removal

Hello,
I was trying to place a 2nd hdd to my thinkpad edge e530 so I had to first remove the cdrom drive.
However, I couldn't remove the screw that holds the cdrom which according to the manual is this type:
M2 × 3 mm, wafer-head, nylon-coated [1] (http://support.lenovo.com/us/en/documents/pd023403)
I tried with the smallest screwdrivers I had, but it wouldn't turn at all and seems to have some tear on it now.
What kind of screwdriver do I need for this?
Thanks for your help!

Just a small bump, I have the same problem with my Lenovo S440. I plugged in an m.2 SSD, closed it up. The SSD didn't seem to be connected correctly, so I tried to open it up again and 1 screw just totally warped. I did use the correct screwdriver, it's actually exactly the same one as the Lenovo engineer who repaired my laptop yesterday used. I can probably drill it out without doing any damage, but if anyone has a better solution I'd like to hear it. I'm also looking for some replacement screws (the size/type isn't mentioned in the replacement manual, but I' ve already opened at seperate topic for that).
I know this post is quite old, but did you by any chance find a way to take it out?

Thinkpad Edge E530 problem with GT 630M

Similar Messages

Maybe you are looking for