ThinkPad L530 DVD-RW Drive Ejecting Randomly & Crashing

The dvd drive will eject randomly and when that happens it crashes my laptop. The screen will go black and you have to hold down the power button to restart the comp.
This happens whether or not the dvd drive is is enabled or not. I ran a virus scan and found nothing. 
Am running Windows 8 in desktop mode. 

Hi again, cruxial
I did some brief research on the Event ID 41 error and found a few things. One Microsoft article (found here) advises to make sure that the memory is not having issues. This can be checked by pressing Enter at the LENOVO screen when starting the computer, and then running the diagnostic called the Quick memory test. A user on a Microsoft forum (found here) found that once all drivers for his system were updated, the error stopped for him. I would give these steps a shot and see if anything changes. The drivers for your system can be found here.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • DVD-R Drive ejects blank discs.

    I have an Intel iMac G5. My DVD-R drive ejects all blank discs. No error message comes up, just some mechanical noises prior to ejection. Having trouble finding the right drivers to fix this, if it is a driver issue.

    yes, there are countless blank media types, and there is NO DVD burner out there that will feed them all.
    DID you switch to a new DVD blank media?
    Also cheap DVD blank media has about a 10% reject ratio......try further down the stack
    hard lessons learned after burning many 10s of 1000s of DVDs.
    If it also ejects commercial DVD movies, you have a dirty laser diode lens.

  • External Thunderbolt Drives Eject Randomly and Name Changes to Blank

    I Have two external thunderbolt drives connected to the trash can mac pro ... sometimes they eject randomly with one drive renaming itself to blank ...
    Anyone ?

    Aloha,
    It was a long week. Here is an update.
    Had the opportunity to go to the Apple Store yesterday and purchase new thunderbolt cables, and hooked everything up this morning.
    I disconnected the Seagate drive from the sled, and brushed the contacts.
    The Seagate hard drive did not boot on my iMac and Disk Utility could not see it. That said, when booted to my wife's iMac, Disk Utility could see the drive, but I could not verify or repair it. The data from my wife's iMac is attached.
    Also, I tried to run Data Rescue 4. It would not see the drive. I do have Disk Warrior, if that is a reasonable option to try.
    Additionally, the LaCie (now connected to my iMac with a new thunderbolt cable) has not yet been ejected. The computer has gone to sleep several times and I have awakened it.
    I very much appreciate your thoughts and time, And I look forward to your thoughts, To include any experience in getting the data off of the Seagate. It contains seven years worth of photographs, which I would hate to lose. I also got the message about redundant backups. There may be some of the backup in Crash Plan.
    Mahalo nui loa
    WRL

  • Drive ejects randomly

    My CD/DVD drive ejects often and without warning. It remains open until I close it again, but it will soon eject again. It ejects with no disc in it, while playing a CD/DVD, while in the middle of burning, you name it. I bought a new drive (Lightscribe) and it does the same thing. I put the original Superdrive in and it still ejects also. Let me know if anyone's heard of this one. Thanks in advance.
    Brian

    My MacBook has "ejected" by itself, uncommanded, several times since I bought it. No disc in the drive at the time. There doesn't seem to be a pattern as to when it happens. It has happened when I was typing (hand nowhere near the Eject button) -- besides, there's no disc in the drive, so Eject button doesn't do that anyway.
    Other times, it happens when I'm not even touching the MacBook.
    Erase / install and it's still doing it. Reset SMC and it's still doing it.

  • Backup drive ejects randomly

    MY backup hard drive is ejected at random intervals, sometimes daily, sometimes weekly. It is a Iomega drive using SuperDuper

    Mike, I tried a new cable although I had to go to an online store to get a Firewire 800/400 cable.  However my backup drive still gets ejected randomly.  Thanks for trying to help.

  • Empty optical drive ejects randomly (every 2-15 mins)

    I'm having a problem with my recently purchased Studio 1535 laptop....
    Specs:
    Vista Home Premium (SP 1) (32-bit)
    Intel Core2Duo T5750 (2GHz)
    4Gb RAM
    The problem is that every now and then I hear the optical drive make an eject sound, even though there is no disc in it. It doesn't seem to happen when a disc is inside ...I can play CD albums without them ejecting mid play.
    I don't think the behaviour is a serious problem (the noise that the drive makes sounds more or less like a normal eject mechanism). However, it's quite annoying and disconcerting, and I don't think it's 'normal' because we have another Studio 1535 (exactly the same specs) that doesn't behave like this.
    If anyone can help me rectify this behaviour I'd be extremely thankful!
    Thanks,
    Marc
    Message Edited by RelicDelic on 09-06-2008 11:43 AM

    first try upgrading the firmware on the drive. this is different than the drivers or the bios version. if that does not work, try this and let me know... i have heard of this on some older laptops... it is worth a shot in the dark. try both separately so we know what worked....
    --Restore Setup Defaults
    Follow the appropriate steps below for your system:
    1. Restart your computer.
    2. At the first text on the screen or immediately after the Dell logo appears,
    press the <F2> key every three seconds until the message Entering Setup appears.
    3. When the System Setup screen appears, press <Alt> + <F> keys at the same
    time to resotre the defaults. (DO THIS AT YOUR OWN RISK, IF YOU HAVE A CUSTOMIZED BIOS, MAY HAVE TO GO THROUGH IT AGIAN - not a big deal)
    4. Press the <Esc> key.
    5. Press the <Enter> key to save changes and exit.
    Your computer restarts.
    --check if the drive ejects in bios.
    To enter into Bios please perform the following.
    Restart the system.
    Keep tapping the F2 as soon as you see the initial dell logo key to Enters
    System Setup menu (i.e. the bios screen)
    2.Press the eject button on the front of the CD drive.
    3. Restart and try it out.

  • CD/DVD combo drive ejects CDs-but only specific ones !!

    hi all,
    I have the following problem with my mac mini:
    a)when I enter any movie DVD, it is either ejected in a few minutes, or worse, it just sits in the Drive,(no mounting on the Desktop) and I have to restart (w/ mouse button pressed to eject)
    b)any movie CD I enter (recently got brand new PoC-DMC; so no scratches etc on it too) same as (a) above
    c)Insert the "Mac OS X Install Disc 1 and Apple Hardware Test" DVD (that came originally with my mac mini), and same as (a) above
    d)However, insert the Mac OS X Tiger Upgrade DVD and it WORKS!!!
    As of writing this, both Disk Utility and Sys Profiler have hung up. though had the same problem as mentioned above yesterday too, and then Sys Profiler was listing the combo-drive, and Disk utility was not. (as per what i read on some other posts in this forum, that would be proper behavior by the system)
    Would appreciate any insights into this.
    Thanks
    mac mini 1.42GHz PPC G4, 512 MB RAM   Mac OS X (10.4.9)  

    Is there any other means of resetting a hardware
    optical drive??
    I'm not confident this will work but it's worth a try, it certainly won't damage your machine. Boot into Open Firmware ("Command + Option + O + F" on startup chime) and run 'reset-nvram' followed by 'reset-all'. Then boot into OS X by typing 'mac-boot'.
    If this doesn't work boot into Open Firmware again and run 'eject cd' followed by 'mac-boot'.
    You could also try forcing OS X to accept that the drive isn't in use by following the instructions here, however they do assume that a disk is stuck in the drive.
    Matt

  • Thinkpad Z61m DVD/CD drive

    My DVD/CD-ROM drive all of a sudden stopped working properly, just keeps coming "please enter disk" no matter what disk I put in there. There doesnt seem to be any dirt or anything in it. Perhaps it is just broken, but could there be some other problem? I tried to find some drives to download, but couldnt find any if that could be the problem.. i have win XP. Would appreciate some advice!

    can you boot into your Thinkvantage Rescue Console (Press the blue thinkvantage button as soon as you boot up).
    If you have the rescue console there is a hardware diagnostic option, which has a cd testing option.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • CD/DVD Combo Drive ejects media

    You pop in a cd, it pops back out. It doesn't mount to desktop. I have tried different brands and I am using the right CD-R. I zapped PRAM. Any suggestions?

    will it take and DVD movies, install discs, music CDs?
    try resetting the PMU -
    If the computer is on, turn it off.
    Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
    Wait 5 seconds.
    Press the Power button to restart the computer.
    looking at the age of the computer, might be the drive has finally bit the dust.

  • ThinkPad T60 DVD Multi Drive MODEL: GSA-4083N

    Hi all,
    the disk drive isnt reading on the system, i have been told it may be the driver that is missing, any help
    much appreciated thanks.

    press the thinkvantage blue button on the keyboard during the laptop initial startup, it should take you to the rescue console (provided that you did not touch the hdd's original partition).
    In the rescue console, select the hardware diagnostic, which should get you into the PC Doctor DOS, in that you can do the interactive test for your disc drive, this should confirm whether you have a fault optical drive or not.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • HP 550 dvd drive auto ejects randomly

    Hi
    i have a hp550 notebook running win xp with sp2
    the problem is that dvd drive keeps ejecting  randomly with or without a disk in the drive

    I have same problem. My new notebook is HP Pavilion dv6t Quad Edition just one month. When I turn on power, dvd drvie auto eject. It can not be closed. If put a cd inside. it run and read nothing.
    What I can do...
    Thanks.

  • Optical DVD drive ejects any inserted disc and does not work!

    I can not read or write certain DVDs in my Mid-2009 MacBook Pro since upgrading to Mountain Lion.
    I insert an empty DVD-R (Verbatim) and it is being ejected. I insert a recorded DVD-R (Verbatim) and it is being ejected.
    I have tried a commercial Video DVD - (Sony) and that one actually did work ... so I am pretty clueless - I can not write any DVD right now.
    In the forum I have found many posts regarding this issue under Lion already.
    However, my drive used to work fine under Lion and I was able to watch / record DVDs etc.
    Now, it is no longer working and I can not use it. Does anyone know how to solve this?
    So far I have found the following hints (which did not work for me):
    ALL OF THESE THINGS DID NOT WORK:
    1) Reset the PRAM (https://support.apple.com/kb/HT1379)
    2) Uninstall all virtual machines (Virtual Box, etc.)
    3) SMC Reset (https://support.apple.com/kb/HT3964)
    some people talk about it being an issue with the 64 bit kernel and that you should try to reboot into 32bit (holding down 32 on startup)
    https://support.apple.com/kb/HT3770
    others blame it on the UDF format (https://discussions.apple.com/thread/3413998)
    There are too many articles in the forums about this - more to make this a random issue.
    The most disturbing thing to me is that multiple of the people in these threads contacted Apple and in the end where told, it's probably a bug... now why is this - obviously critical bug - not being resolved, yet ?
    https://discussions.apple.com/message/15949663
    https://discussions.apple.com/thread/3413998
    https://discussions.apple.com/message/5496311
    https://discussions.apple.com/message/17628953
    https://discussions.apple.com/message/17885393
    https://discussions.apple.com/message/18521761
    https://discussions.apple.com/message/18331901
    https://discussions.apple.com/message/17215345
    https://discussions.apple.com/message/15185260
    https://discussions.apple.com/message/15585199
    https://discussions.apple.com/message/19049195
    https://discussions.apple.com/message/18767233
    https://discussions.apple.com/message/16875193
    the list could probably be continued, but I'll leave it at this

    I also had the same problem shortly after upgrading. My optical DVD drive ejects any disk I put in. This started about 2 months ago.
    I just got back from the Apple store, after setting up an appointment, and they told me that my life is horrible because my MacBook Pro is no longer under warranty as of 32 days ago. This is really BS.
    However just like any other company that treats me with poor customer service I just take my future business elsewhere and make sure not to recommend them to any friends and family - as well as tell them about my horrid experience.

  • I Need a PC Detective for..The Strange Case Of My Malfunctioning DVD RW Drive: IT WILL NOT EJECT!

    I can't get this drive to spit out my disc and quit saying error code: There are no factual errors.
    Here is the play by play summary list regarding my pc's vital stats, events that occurred just Before the problem happened, what happened During the time and  right After the strange malfunctioning of my DVD RW Drive.
    BEFORE:
    My DVD RW disc drive is malfunctioning on my Acer all-in-one desktop running a new install of win 7 ultimate x86.   I was in the middle of labeling a handful of blank title DVD's by looking at the content on them.
    I stuck in the first no label CD to jar my memory. When I did realize, I ejected it, wrote on the top, then went to the next DVD and did the same. When I loaded the 3rd DVD in the DVD tray, I wasn't sure what was on it. I saw 3 files labeled photos, templates,
    and back up. upon further inspection I realized the content I was looking at was off my off my old palm pilot. I clicked eject. BUT...
    DURING:
    ...at the exact moment I click eject a I got a double bubble notice that tells me Adobe has a important update and Windows has important updates too. OK, so I approve the updates. Adobe was fast... Windows takes awhile and says I can continue doing what I was
    doing while the updates occur.
    AFTER:
    I go back to my DVD Drive project. I figured the timing was bad that's why my disc didn't eject, and so I right click to eject my DVD again. This time the notice says "Please insert disc in the drive". WHAT?? So I start a series of mouse clicks to
    reload the contents i just read from the disc of old palm pilot info, and it was still all gone. The drive reads nothing is inserted aka the drive is empty. OK But I still cant eject my disc either. Frustrated by the obvious fixes not working I eventually
    do reboot my PC to start fresh, and now I see my palm pilot info displayed on the disc that's in the DVD RW drive: I click on a folder to see the contents just to make sure I can. AND I COULD. Then I try to eject it and the same BS happened again... Error
    code: 0x80070057 /  Path: unknown / Source: Catalog - OK OK to spite the fact this error code has no indication that it applies to my DVD RW issue so.. whatever, I try to see if my contents still appears, and it does.   I again try to eject
    and it pops up error: "again please insert a disc into the drive" so I check again to see my content and again it's also gone.In my Device Manager everything is fine and says working correctly?
    LAST: I make my way to the Microsoft Support run the DVD RW "Fix-iT" tool.  Before that I ran a internal diagnostic with the tools in my OS.. I read the help section, I did all the obvious things I could think of. I can't afford not to have
    my Drive working, I need to install some programs.   PLEASE CAN YOU HELP ME?

    Hi,
    According to your description, maybe the disc is damaged or the disc is compatible with the drive. Since you cannot eject the drive,
    you can update the drive to see if the issue persists. Maybe the issue is due to the hardware of the
    Disk Drive, you can contact your computer’s vendor for assistance.
    In addition, since it is related to windows 7, maybe you can ask in the Windows 7IT Pro forum below for further assistance.
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    Best regards,
    Susie

  • Hello my name is Tyesha Woods,and I have a problem with my dvd hard drive, it will not eject my cd no matter what i do can you please help me?

    Hello, my name is Tyesha Woods I onw a Macbook and my dvd hard drive will not ejected my cd ,I have tryed everthing I could would you please help me?

    Hi Tyesha,
    Your DVD won't eject?
    Restart the MacBook - as it is restarting, hold the trackpad button down. This will force it to eject. The disk should eject before you get to the login screen or desktop.

  • DVD stuck, drive not recognized in system profiler, can't eject, HELP!

    I am distraught, my DVD/CD drive is quite sick, if not dead. Alright, I watch DVDs on my computer somewhat regularly, but this one time I was about an hour into a movie when it just stopped playing. I couldn't finish the movie because now my computer doesn't recognize the disc or even the fact that it has a DVD/CD drive at all. The DVD doesn't appear on the desktop and the eject button doesn't do anything, it's been stuck my drive for maybe a month or so and I forgot about it for a while actually.
    The scariest thing is that when I check my system profiler I can't find any info about my DVD drive. When I click on disc burning, it says I dont have a disc burning device installed.
    I've tried resetting the power manager (PMU) but to no avail. I would really like to solve this without taking my computer somewhere.
    Any suggestions?

    Welcome to Apple Discussions
    Simple step first. If the "stuck" is due to a software problem, restart the computer holding down the click pad through the start-up until the disk ejects. This usually ejects anything in the drive.
    You'll find other suggestions here (Donald Worrell post).
    If none of the above suggestion work, you'll need to get a technician (Apple certified, if still under warranty) to look at the machine. If the DVD ejects, but the profiler still does not recognize the drive, then a trip to the Technician is your only recourse.

Maybe you are looking for

  • Connecting a videocamera to an external HDD for video download

    I recently purchased a 250GB Lacie HDD to which I save downloaded raw and edited video. I was told by my Apple dealer that I should be able to connect my videocamera to the FireWire port of the Lacie HDD which in turn is connected to the FireWire por

  • MDM Sender Channel - reading file name

    Hi all, Is there any simple way to read the name of file sent by MDM when I am using MDM sender adapter ? I know if it's file sender channel, then we can read file name by writing a UDF. But just wondering about MDM sender adapter. Regards, -Shankar

  • OpenDocument URL for SAP BW query

    Hi, We have built universe on top of SAP BI query and created the variable for Fiscal Year. When I run any WebI report created from the same Universe it automaticaly pops up the window to pass the parameter for Fiscal Year. I have created two reports

  • HOW TO SUPPRESS "DO YOU WANT TO SAVE CHANGES YOU HAVE MADE"

    ORACLE APPS CUSTOM FORM WHENEVER I AM PRESSING CTRL+F11 AND SERACH ABOVE PROMPT IS COMING. HOW TO SUPPRESS THAT ONE.

  • Updating NWDS CE 7.1 from Update Site

    Dear friends, I installed the NWDS CE 7.1 EHP1 SP1 Preview version from SDN and later updated to SP4. Currentl there are no other perspectives available in the NWDS other than the default one.I am trying to add new fearures like WD and Compositional