Thinkpad S540 restarts when i shut down

Hi
I have had this laptop for 7 months now, but since about 4 weeks ago when i click on shutdown i realised that it looked like it was shutting down... and 30 seconds later would fire up again.  At first i thought it was me clicking the wrong button, but it has happened daily now.  Only way to shut it down is my removing the power cable and then shutting down.
Any suggestions on how to resolve this?
Thank you!
Solved!
Go to Solution.

Hi Aurora_mc,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not shutting down on your ThinkPad S540.
Is the issue persists when you try it with safe mode option?
Have you done any update for your system, may be with Windows update or with ThinkPad update?
Go to BIOS and press F9 to set the BIOS to default option and F10 to save and exit.
Please let us know the status after performing the above troubleshooting steps.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • My Thinkpad L540 restarts immediatly after shutting down!

    My new Thinkpad L540 is working correctly, except that the only way to shut it down seems to be holding the power button for four seconds. In particular,
    If I turn the laptop off normally from my OS (by pressing the power button or entering some command), the laptop shuts down properly and starts again after a second.
    If I press the power button when the laptop is booting (on the Lenovo logo), the same happens.
    If I turn off the laptop by pressing the power button for four seconds after booting and the power cable is on, the laptop also turn on.
    If the laptop is off and I connect the cable, the power button blinks a few times but this time it doesn't turn on.
    Any ideas of what may be causing this?
    Also, when I try to suspend the computer it also resumes immediately. I guess these two issues may be related.

    My BIOS has an option to switch on when AC is attached, but it's currently off. I tried to set it on and off again just in case, but that didn't work.
    I installed GRUB (since the Poweroff command on syslinux don't work on ACPI, for some reason) and tried to do what you wrote (pulling out battery, pressing power button for a few seconds, putting battery back in, and issuing "halt"), but the result has been the same as always. I also tried installing the 2.6 kernel on a new Ubuntu 12.4 installation, but nothing changed.
    I did order my laptop with an SSD which was originally an SSHD in the Windows 8 installation, but now I'm using it to put the root partition on my Linux installation. I'll try to reinstall Windows 8 to see if that solves anything.
    I'd probably try to find my warranty at this point, but unfortunately I live in Argentina where importing and exporting technology without bringing it yourself is pretty much impossible since a) I have to pay excessive taxes for everything, b) That means the "fixed" laptop will be stuck in the central mail for a while and c) There's a 100% chance it will be stolen by some employee there. I'll see if I can get back to a world with sane commerce laws before my warranty expires

  • Why does SL automattically turn back on when I shut down?

    Why does my mac mini automatically restart when I shut down? I shut down via the normal methods (apple menu, Shut down...) and as the shut down process finishes the computer automatically restarts and goes to the log in screen, If I shut down via the log in screen it turn's off. What gives?
    Shouldn't it just shut down when I ask it to and not return me to the log in interface ?
    Help please.Thanks all.

    michael Kirwan wrote:
    Why does my mac mini automatically restart when I shut down?
    Seems that some process is calling it back.
    If I shut down via the log in screen it turn's off. What gives?
    Probably a process in your account and not systemwide.
    Go to System Preferences >> Accounts >> Login Items, and remove them. BShutdown and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Test.
    EDIT: Also, unmount & disconnect all peripherals except Apple keyboard & mouse.
    -mj
    Message was edited by: macjack

  • When I shut down the Mac Pro, it restarts

    Has anyone run into this issue with their Mac Pro? When I shut down the computer (either via the Ctrl + Option + Cmd + Eject or the Shut Down command from the Apple menu drop down), the Mac Pro will simply restart and take me back to my log-in screen.
    At this point, I can hit the shut down button on the login window and it will shutdown, but this is annoying, a waste of time, and unnecessary.
    I have tried performing an SMC reset, but it has not resolved this issue.
    Specs: Mac Pro (2010)
    3.33 GHz 6-Core
    (2) 2TB Internal HDD
    12GB ram
    ATI 5870 graphics card (1GB)

    I have noticed the exact same behaviour. It only happens when I have something plugged into one of the front USB ports (example : external HD, USB key)
    Apparently the system crashes during the shut down process, and then reboots.
    Unfortunately, I have not yet found a solution

  • My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart.  The icons all change positions, alphabetically.  Just started happening.  Any thoughts?

    My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart.  The icons all change positions, alphabetically.  Just started happening.  I prefer the icons to a list format.  Concerned this might be a symptom of a larger problem.  Any thoughts?
    revmandan

    It's normal for the icons at the top level of the startup disk to revert to the same arrangement every time the Finder is relaunched. If it's important to you to arrange those icons in a persistent way, proceed as follows.
    Back up all data.
    Open the Info window on the startup disk (labeled "Macintosh HD" unless you gave it another name.) Click the lock icon in the lower right corner of the dialog and authenticate.
    In the Sharing & Permissions section, click the plus-sign button to add an entry to the access list. Give yourself "Read and Write" access. This will be a temporary change. Leave the dialog open.
    Open the Finder window and arrange the icons as you wish, then close the window.
    In the Info dialog, use the minus-sign button to delete the entry you just added to the access list. Don't change anything else. When you're done, it should be the same as when you started. Close the Info dialog.

  • How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

    How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

    Which version if iPhoto and MacOS X do you have?
    Do you have any iPhoto plug-ins  installed?
    Open the folder /Library/Application Support/iPhoto/Plugins/
    To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto.  Is there anything installed?

  • Interclue fails to initalise upon restart from either shut down or back out of hibernation. Works when re-installed, but then fails every time.

    Interclue fails to initialize upon restart from either shut down or back out of hibernation. Works when re-installed, but then fails every time. What would cause this situation. Never had problems with this add-on with Firefox until I downloaded Firefox 4.0. I can disable, re-start, enable,re-start, and it works fine. The same scenario holds true if I uninstall and then re-install add-on.

    Just a guess, but I wonder if you have some application or process hanging up that's stopping it from shutting down? You might try closing each application individually and see if this helps.
    Good luck!

  • Comupter resets settings when i shut down and restart

    My macbook laptop as of yesterday now does some kind of factory setting reset when i shut down and restart my laptop. What can I do to fix this. My picture, itunes files etc is gone. I have shut down and restarted a few times now and every time the dock and dashboard settings go away and i have to start itunes, pics etc as if I have never used those programs before. Someone please help. Thanks.

    It's normal for the icons at the top level of the startup disk to revert to the same arrangement every time the Finder is relaunched. If it's important to you to arrange those icons in a persistent way, proceed as follows.
    Back up all data.
    Open the Info window on the startup disk (labeled "Macintosh HD" unless you gave it another name.) Click the lock icon in the lower right corner of the dialog and authenticate.
    In the Sharing & Permissions section, click the plus-sign button to add an entry to the access list. Give yourself "Read and Write" access. This will be a temporary change. Leave the dialog open.
    Open the Finder window and arrange the icons as you wish, then close the window.
    In the Info dialog, use the minus-sign button to delete the entry you just added to the access list. Don't change anything else. When you're done, it should be the same as when you started. Close the Info dialog.

  • Firefox does not save my tabs or sessions when I shut down my computer

    To be more clear:
    Yes, I have set my options to "show windows and tabs from last time".
    No, I did not check "clear memory on shut down" or "start private session"
    Also, it saves my tabs when I restart the browser, but when I shut down my computer and start up again, Firefox does not show my tabs from last time. The same thing happens with sites I've logged onto before; it logs me out after I shut down my computer.

    Did you check the "Clear Recent History" settings to be sure cthat you do not clear the Browser history and the cookies?
    See [[Clear Recent History]]

  • IMac restarts instead of shutting down

    Hello,
    I have a 2009 iMac 24" running 10.6.2. When I select shutdown from the shutdown menu it asks if I want to shutdown and then after selecting yes it starts the shutdown process. After shutting down it immediately restarts. When selecting shutdown from the login screen, it shuts down correctly.
    -I've zapped my PRAM
    -I did a SMC reset
    -I've unselected restart after power failure
    -I have a wireless USB mouse connected
    -I have Apple's wireless keyboard
    Any thoughts?
    Help is much appreciated

    If it does not happen in the new account (you should try it a few times to make sure), then the cause is usually one of two things, and there is probably not anything wrong with the overall system.
    First is a background process that runs in your normal account. Check System Preferences Accounts pane +Login Items+ tab. Remove anything there that you no longer need to have running. Then, with what's left, remove one at a time and test to see if it makes a difference; make sure you note what you removed (and where it is located) so that you can put it back if it was not the cause.
    Second are user preference settings. In this case, this is a bit harder to trouble-shoot, because I can't think of any particular user preference file that would make a Mac restart instead of shut down.
    If the problem does not happen in a new account, and you can't determine the exact cause, one thing you could do is create a new user account for ongoing permanent use, and transfer your user data from your current account to the new account. Eventually, once everything is working fine, abandon your current account.

  • Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "

    Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "helpful hint" hold down the option and command key and restart iPhoto - select the top three and you should be able to get rid of the dreaded exclamation point.  My MAC ran through the first two options dealing with thumbnails, but crashed during the "restore database"  step and now I have a mess.  Help, please.  Thank you.

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • Firefox 18.0 crashes when I shut down Firefox on a 32-bit computer. OK in 64-bit computer.

    Firefox 18.0 works well when I open it on a 32-bit desktop. I can open any website (I use only one tab). But when I shut down Firefox, I get the "Firefox crashed" message. It reloads ok, but I've never had this problem with any Firefox version before. I downloaded another copy of 18.0 and the same thing happened. 18.0 works perfectly on a 64-bit laptop. Both computers are wired to the router. I keep my security, Windows 7, etc. updated.
    If I can download 17.x, I'd like to see if it happens there, too It never did before. I would appreciate your suggestions. Thanks.
    Art

    Hello [user],
    Thank you for posting on Mozilla Support. We value and appreciate you as a user.
    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Did you know that Mozilla Support is helped out by volunteers? Be part of SUMO! http://mzl.la/OJtpch
    Donate more than $30 and get a T-Shirt! https://donate.mozilla.org/page/contribute/joinmozilla

  • Was trying to restore my database in iPhoto when it shut down - now my thumbnails are distored, logged under a new name and when you click on a thumbnail it opens as another photo.  Help, please

    Could someone help me restore my photos?  I was trying to "restore my database" in iPhoto when it shut down - now my thumbnails are distorted, logged under a new name, and when you click on a thumbnail it opens as another photo.  I was following another "helpful hint" hold down the option and command key and restart iPhoto - select the top three and you should be able to get rid of the dreaded exclamation point.  My MAC ran through the first two options dealing with thumbnails, but crashed during the "restore database"  step and now I have a mess.  Help, please.  Thank you.

    Repost in the iPhoto forum, where the real iPhoto wizards live:
    https://discussions.apple.com/community/ilife/iphoto

  • MOVED: K8T Neo-V with Win XP Pro, computer restarts instead of shut down?

    This topic has been moved to AMD64 VIA/AMD/ATI based board.
    https://forum-en.msi.com/index.php?topic=93812.0

    I disabled Boot on LAN, disabled Wake-On-PME in BIOS, and checked my control panel power settings, but it still restarts instead of shut down.  I just got this motherboard and it started doing this ever since I installed it.  I did reformat my hard drive and reinstall windows after I installed the motherboard.  I'm trying to avoid opening the case again, I don't think I flipped the power switch and reset switch because when I push the reset button or use Start menu's restart, the computer still restarts.  I guess I'll double check it again...
    for the "clear cmos and load defaults in the bios", this is a brand new motherboard, shouldn't it already have the default settings?  and what do I need to do to reinstall the mainboard's chipset drivers?
    Thanks!!

  • Macbook Pro retina mid 2012 restarts instead of shut down/sleep

    it's been happening since i upgraded from mountain lion 10.8.5 to mavericks 10.9.2 :
    my rMBP mid 2012 2.6g 8gb always restarts when i shut it down via apple logo or power button. it also restarts when i choose sleep or i close the lid.
    it happens only with charger connected.
    once i didn't realize that it happened as "rolling restarts" with lid closed in my bag after i close it, the battery drained out from fully charged (charger disconnected).
    with default energy saver setting, it always says "Your computer restarted because of a problem." when i woke it from sleep.
    i did reset SMC and NVRAM but it didn't solve that problem.
    also, at the beginning of the problem, kernel panic happened so often.
    fyi, i have only 2 or 3 kernel panic when i run it with mountain lion.
    any solution for that?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.

Maybe you are looking for

  • Connection to R/3 with SAP Router

    Hello, I want a connecton from XI 3.0 to R/3 with SAP Router. But if i want to import the RFCs i become no connection. I Edit Software Component Version, but there is it not possible to set any Sap Router String. For Connection Data you can only set

  • Can't get my hyperlinks to work...

    Hi Everyone, I am hoping someone can help me.... I am not very computer savy so if you could answer in the simplest way you know how would be awesome!! I can not seem to get my hyperlinks to work on my website, they work when I am editing the website

  • JNI and multithreading

    Hello all We have developed a Java application that invokes C functions of a third-party vendor via JNI. One of the clients of our application is a servlet that invokes our application in a multithreaded manner. We instantiate the JNI in the init() m

  • How (Funny)  is oracle lite on iPAQ !!!

    i am doing VB programming on msacess in iPAQ device , there is some limitation in sql and one told me those are not exists in orale lite so i tred it , intallation ok , running msql ok , creating odb ok , when it comes to programming with ADOCE it is

  • Using Grep on multiline textframe

    Hello I am using GREP to find text and replace in scripting it but It seems to not work on multiline text. Ex.: My texte My text2 I use ^.({8})(My text2){1}) to replace the 'My text2' but it doesnt work. Is there any way to make safe text subtituions