ThinkPad splash screen

Is there a way to disable the ThinkPad splash screen during boot up? I checked out the BIOS settings on my T400 but to no avail.
Thanks

I disabled a few things under the BIOS that I wasn't using and a few things within Windows mentioned here..
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/What-is-the-Rapid-Boot-extreme-feature-on-T...
So far, it went from a 28 second bootup to about 20 seconds (I'm also using an SSD). The shutdown time is about 5.8 seconds. At this point, I'm pretty content with the progress now.
Thank you all for the comments.

Similar Messages

W540 stuck on ThinkPad splash screen

I've got W540 (32GB RAM, 500GB HDD) running Windows 7.1 64bit that is constantly getting stalled at the ThinkPad splash screen during powerup.
It will often stall at the "ThinkPad" splash screen.
Other times it will stall at the "ThinkPad" splash screen with the "To interrupt normal startup, pess Enter" message displayed.
I've seen other entries that reference this issue with:
- using a SSD, I'm a standard HDD.
- a broken USB port. Mine all look OK (is there a way to actually test them?)
I've updated to the latest Bios and reset the Bios defaults with no change.
I've run the hardware diagnostic tests and found no errors.
When I say "stall" on the splash screens I sometimes find if I leave it alone long enough (maybe 5+ minutes) it will continue to the normal Windows boot up.
This is the 2nd W540 out of a pool of laptops to display symptoms similar to this.
Anyone got information on what may cause a stall at the ThinkPad splash screen?
Thanks.

Not knowing your exact set up, but KNOWING that this is a blind black box with no activity light like a normal workstation, you need to do workarounds.
Normally, on my older workstation, I could see the HD light blink and the rate would give me an inkling of the process.
The WORKAROUND: we now need to calibrate your computer clock to your watch, or use a cell phone time keeper which would already be synced if the W540 is connected to the WiFi (no switch so the W540 has to be connected, unless there is no access point). As an aside, I have found that when there are large MS updates, like last Tuesday, or other such WiFi connected updated, the compute also hangs with the user having NO KNOWLEDGE that the WiFi is talking / or calling home to some cloud device.
Back to the workaround: Boot the system, and when there appears to be a crash or hang in the sequence, note the time of the 'event' and also note the time when it appears to restart. Once properly booted, and I cannot tell you how often this has happened to my W540, check the even times in the [Event Viewer]. Too long to explain, Google the term "Win 7 Event Viewer", or check this:
MS Help - Event Viewer
Then find out where the computer chokes and restarts by checking the time in the events and the cause. These are i/o routines which the Lenovo Gods have decide to shield us from such WORKSTATION task.
FWIW, often I get <Program Not Responding>, when in fact it is performing a numbers intensive task.... yet I cannot tell what is happening as there is no i/o light. Usually unlocks when the task is finished, which may be what is happening on your system. You need to find out the task that is causing the wait.
Odd, the Lenovo Gaming machines Y50 have these lights, albeit atrophied: see lower 4 indicator lights....

SL410 frozen at Thinkpad splash screen

Hello,
I have an SL410 that will not get past the Thinkpad splash screen. I've already tried checking the pins on the USB ports.
I've removed the keyboard, hard drive, battery, and wireless card but it remains frozen. I've drained the power by holding the power button down for several seconds. I even swapped the processor and checked the memory modules and slots.
Any suggestions to get past the splash screen? Thank you very much!

Yep, Verizon replacing it.

Thinkpad X1 Carbon stuck on splash screen

I bought a new X1 Carbon (20A7) a week ago and from time to time the laptop gets stuck on the ThinkPad splash screen when booting. I have to hold the power button to turn it off and then it boots fine. My brother has this problem with T540p, although this happens to him a LOT more often (also, if he waits patiently for 10-20 minutes, the system boots eventually, I havent tried that on my X1). It doesn't matter if the AC is connected, whether there is something connected to USB ports, whether it was a restart or just normal boot, there is no pattern that I can see, this seems random. We tried updating the BIOS to the newest version, our USB ports are not bent or anything, the SSD with the OS is set as the first boot device. This still happens. I see there are more people with thinkpads who have the similar problem, but their solutions do not apply (if there were any).
Solved!
Go to Solution.

OK, so I contacted support, Lenovo replaced my SSD drive (wrranty applies) and the problem is gone. The service guy said that SSD Firmware update using Lenovo application may have worked, but I had Ubuntu installed, so I was unable to run it.

T500 freezes at opening Thinkpad spash screen

I have a T500 [2081-CT0] running Windows 7. Today on boot up the unit froze at the Thinkpad splash screen at the beginning of the bootup routine. I can hear the fan and feel the HDD spinning.
I have, to begin with rebooted several times, removed the battery, reseated the HDD...
A previous issue that has been intermittant is the USP not recognising an external HDD. It would always recognise on reboot but not initially as on other home and office computers. This issue began in the past two weeks.
My thought is HDD controller but I am not familiar with the T500 architecture to know its place in the world.
I have done initial searches here [and will do more] but right now i have a dead T500
Solved!
Go to Solution.

**bleep**, good call.
I peeked at the three USB ports and noted that one [closest to the RJ45] not only did not have the block on it but the pins were bent. I used a small screwdriver to pull all the pins up, off ground [#4 was on the ground] and the machine booted.
I assume at some point a USB device "borrowed" the little block in the connection, but we kept plugging in the extrenal drive, sometimes seating well, other times not.
We are now up and flying.
Thanks.

BLACK SCREEN on start up with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-power

Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.

You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 :::

T430U not booting - blank screen or never gets passed splash screen

System specs:
Lenovo T430U
Intel i5-3427U
8GB PC3-12800 DDR3-1600MHz SoDIMM Memory
HDD 500G 7200rpm Toshiba
mSATA 24GB Samsung Cache
Win 8 Pro, upgraded to 8.1
I rarely use this machine but a couple of months ago I went to boot it up and found that I was not able to get past the Windows splash screen. Sometimes I don't even get the Windows splash screen, I just get a black screen. Rarely I get a Windows screen saying that it is diagnosing a system problem or something to that effect and I can even get to where it will allow me to do some Windows diagnostics but nothing ever comes of it and the process is extremely slow.
I called Lenovo, but of course my machine is out of waranty so the tech just gave me a few pointers and said I could send it in to the depo but the potential repair cost could range up to about 75% of what I paid for the machine in the first place. Anyways, after having me try a few things in the BIOS he suggested that it was likely the hard drive. I mistakenly thought from the time that I bought this machine that the OS was installed on the 24 GB SSD so I ordered a new SSD and swapped it in. This made no difference at all as I have now learned that the mSATA SSD drive is merely for cache to speed up booting.
I am afraid that this means the main HDD is at fault, and quite frankly, if I replace it I am going to do a fresh install of Windows 7. But I do have pictures and docs that I would like to salvage if possible. Any ideas on what might be going on here?
Solved!
Go to Solution.

Install this on the computer that you are going to hook up the hard drive to: https://www.piriform.com/recuva
I've had pretty good luck with it in getting files off of dying hard drives. Wrap the hard drive in a small towel and put it in the freezer for a half an hour, then take it out and hook it up and run recuva right away. You might get lucky.
It sounds funny but I've had it work more than once.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT

BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1

T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Change BIOS Splash Screen?

Is there a way to change the bios splash screen on the newer thinkpads?
I found a guide for the older ones but i'm not sure if it works for the newer ones (particularly the W520 for me): http://www.thinkwiki.org/wiki/How_to_change_the_BIOS_bootsplash_screen
Thanks!

I looked at my T430s and it is as you describe, but I don't know of anyone who has done this since the UEFI BIOS was introduced, I haven't dealt with custom flash images since the T60. If it doesn't work, I would be afraid that the instructions might be outdated and just might not work.

T450s startup takes 35 seconds before showing splash screen. (11 sec wake-up)

The follwing are my problems:1. When starting up the machine, it takes about 35 seconds before the first screen activity appears (Lenovo splash screen). After that it boots quite normal.
2. When waking out of sleep mode it takes 11 seconds before I see the power led stopping to "breath" and the screen wakes up.
It feels like this is a hardware/bios related issue, as (so far I know) hdd/ssd is only accessed after the bios has loaded and has finished its hardware checks. When sticking in a bootable usb it only starts flickering after the bios had loaded on screen.
Question:
Does anyone has an idea why my laptop is waiting so long to boot or to wake up? I don't mind waiting a bit, but waiting for 35 seconds + the normal boot time is really annoying. Specially with the fact that the laptop doesn't show any sign of live for 35 seconds after briefly lighting up the keyboard backlights. The wake-up delay is also very annoying since even my 7 year old BSOD laptop wakes-up faster, and I'm using sleep mode a lot.
Some origins that I'm thinking about:
- Hardware check during initial hardware startup does not yet recognize a dedicated GPU card. (POST: Power On Self Test)
- I don't think this is a problem with my software since the problems occurs before reading any media.
Things I tryed already:
- Reset bios.
- Start in legacy mode.
- Bios update
- rebuilding MBR (although I don't expect this to be the problem.)
- Refreshing windows installation although I don't expect this to be the problem.)
This problem was already at the beginning (with origenal hardware):
From the first time I started the laptop (so even with the HDD) I noticed it took quite long to start. I remember pressing the ON/OFF button multiple times and thinking I did something wrong, when suddenly the "Lenovo" splash screen appeared.
I hope someone can help me!

My problems have been solved! An engineer contacted me that they have recieved a spare mainboard and they wanted to make an appointment. I gave them the adress where I worked the next day since I'm very mobile, and the next day an engineer came by. He seemed like a skilled IBM engineer and tested my machine and came to the same conclusion as me. He then did a few tests to see if the problem was caused by something else then the mainboard but ended by replacing my mainboard with good care. After the replacement the the boot and wake-up time was normal like it should be. I'm very pleased by the service Lenovo ThinkPad has given me. I need to add that when I called for support I got someone on the line that could not really understand me, neighter dutch or english. But that was also duo a bad connection it seemed.. But after that call I did not really expect this would come to a good end. I was then really suppriced that 5 day's later a dutch engineer manager called me to make a appointment.

Z77A-GD65 Multiple BIOS Issues - B4 Hang, Splash Screen Blinking

Back in November 2012, I built a home server with a Z77A-GD65. Lately, I've noticed some strange things happening that I've been trying to research but to no avail.
First off, I get the B4 code hang-up whenever I'm booting. This doesn't matter if it's a cold boot or a reboot, it hangs on B4 for about 10-15 seconds, flashes 92 really quick, and then goes to A2 which it stays for another 5 or so seconds. After that I get the MSI splash screen for about 1 second, then it blinks 5 times. After that it goes into Windows just fine.
The blinking is a new issue, the B4 hang is not. I've read from multiple posts that this is a USB issue. When I disable USB legacy support, the issue goes away, but of course then I can't have legacy support. I have yet to figure out what exact device is causing it. In the process of trying to figure this out, I updated BIOS to A.A0. After updating to this version of BIOS the splash screen blinks 5 times before going to the "Starting Windows" splash screen. This is a more difficult issue to figure out why it's doing this because if you search for "BIOS" and "flash" or "flashes" or "flashing", you typically get results for flashing your BIOS. Hence, why I'm using the term "blinking". But even then I can't really find a solution out there.
I also happened to see that the website for the Z77A-GD65 is showing a newer BIOS version, but I'm unable to flash this (at least using M-Flash). I threw it on a USB, re-enabled USB legacy and whenever I click on it to install, the BIOS screen hard locks. The screen just freezes exactly where it's at in the BIOS and the mouse is dead. However, I can CTRL+ALT+DEL on the keyboard and it will reboot the system so I don't need to power cycle the computer. Not sure why this is happening either. Perhaps I need to flash this a different way? Maybe I don't need to flash this at all?
I could really use some input here on why this is happening.
As for the specs on my system, they're as follows:
i7-3770K overclocked to 4.2 Ghz by using the Turbo Mode in BIOS
32GB Komputerbay DDR3 PC3-12800 1600MHz DIMM with Low Profile Blue Heatspreaders Quad Channel RAM | 9-9-9-24 XMP ready
AMD PowerColor 7870 Myst Edition GPU - currently not overclocked although overclocking this doesn't seem to affect any issues
2 - 128 GB Corsair SATA III SSD - one runs the OS, the other I use to load games from
2 - 500 GB Seagate Barracuda 7200 RPM Sata II HDD's mirrored via Windows 7
1 - 750 GB Seagate Barracude 7200 RPM Sata II HDD
1 - 1 TB Western Digital MyBook USB 2.0 external
2 - 3 TB Seagate USB 3.0 external
ASUS DVD Burner - not sure which one, it's a cheapy $20 from Newegg
1 - PCI USB 3.0 expansion card
Antec TruePower New TP-550 Modular 550W Continuous Power ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Active PFC "compatible with Core i7/Core i5" Power Supply
NZXT Switch 810 gunmetal - currently have 4 fans running but plan on more, also the Switch 810 has the multi-card reader in the front with 1x SD Card, 2x USB 2.0, 2x USB 3.0
for peripherals
1 - Microsoft 360 Wireless controller adapter (legit one, not the knockoff although I had a knockoff prior to getting the real deal)
1 - Logitech Wireless USB Keyboard with Touchpad
I tried to be thorough. Thanks in advance for any help!

Quote from: PirateDog on 26-August-13, 12:45:18
Probably a USB device problem.
This is a candidate, as well as mouse and keyboard. Disconnect USB devices one at a time to find the culprit.
A lot of devices running. PSU a +12V single rail or is it multi rail? A rail going to the graphics or components may not be enough amps. My best guess is the card reader.
For UEFI/BIOS flashing, select your mainboard here and use the forum flash method;
I'll definitely try unplugging some of these USB devices to see if that helps with the B4 hang issue.
As for the PSU, according to the description for it on Newegg: "Four industry-leading independent +12v rails are provided for more stable and safer power output." It has two rails going to the GPU. The GPU is a new addition to the system and so I wasn't running it until recently. The issues were occurring beforehand, but you're right that this PSU is underpowered for the rig considering PowerColor recommends a minimum of 500w. I'm going to be buying a larger capacity one sometime in the very near future. Any recommendations on good modular PSU's? What's a good way to tell what wattage to get?
Thanks for letting me know about the forum flash method. I'll be back later when I have some results.

Want to hide or mod FCP 6 Splash Screen

Just want to hide the splash screen on my FCP system. I rent it to indy projects and I want to protect my serial. How can I access the Splash Screen Image? I've been able to mod the splash screen on all the other apps on the rental system but can not find or get to the Splash Screen for Color and FCP 6. I know that a real hacker can find my serial some how but I am not trying to block those geniuses. Just the lazy ones that are willing to go as far as copying or screen grabbing my Splash Screen and or About Screens to get a working serial. I know how to mod the Splash Screen to hide my serial and how to hide the app so the user can't get to the splash screen. I just don't know where the splash screen file is. I've read that it is in the .nib files? I just wanna hide my serial. Don't care if I mod it myself or install an app that does it for me. Any apple people or anyone else know what I can do to protect my product. I've also been told that the splash screen does not display the full serial but it soo totally does. Hey apple, please add the ability to hide this splash screen. Perhaps with it's own password to unlock and show again? OR, make splash screen hiding a universal ability in the OS. That would be sweet! Anyway,... ideas?

Hey all. I have been able to mod the splash screen on all the apps in FCP Studio 2 except for FCP and Color. The other studio apps Splash Screens access a .psd file. The only files I've found in Color that seem like they might be the splash screen files are ft_splash.Isi, ft_splashEDU.Isi, ft_splashNFR.Isi and ft_splashVOL.Isi
How do I open a .Isi file? If I can figure that out I can hide the serial number for Color but it still leaves FCP. Why do apps show the serial on the splash screen at all? What purpose does this serve?

Switched computer cases and now I hang at the MSI splash screen.

Hey guys. I've never had any problems with building my PC until yesterday on the simplest of tasks.
I decided to buy a new case and switch everything over but when I did it decided to hang on the MSI motherboard splash screen.
Specs:
* MEM 4Gx2|G.SKILL F3-12800CL9D-8GBXL + one more stick.
* Processor = AMD Phenom II X6 1055T Thuban 2.8GHz Socket AM3 125W Six-Core Desktop Processor HDT55TFBGRBOX
* Graphics Card = HD 7950
* Motherboard = MB MSI| 880GM-E41 880G R
* PSU = CORSAIR CX series CX500 500W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
* OS = Windows 7 64Bit
* No overclocking.
So far I've done the following.
* Removed battery/Jumped the bios.
* Checked and rechecked each RAM stick.
* Removed all connections.
* Removed graphics card etc.
Any help would be greatly appreciated, Christmas has kind of killed my budget for a new build.
Thanks!
These are as far as I can get before everything stops working.

Really strange.
Have you made sure that there was will be/was no contact between mobo and case (apart from spots where the contact should be made) ? This could've break the motherboard.
Check ALL of the power supply cable connections between it and mobo.
Now something weird which doesn't seen to make any sense... Try to put your motherboard back to the old case.
That's all my suggestions, apart from that, if you're still able, then get it on a warranty and RMA it.
Good luck.

Tecra M3 - Stuck at Toshiba BIOS Splash Screen

Not sure what to do here with this one...
Bit of history... we bought my niece a used laptop for surfing/movies which worked fine when I had it a few weeks setting it up and such, she had it a week and it's now dead. Some days it works, some days won't even turn on. So, after much work determined it to be a motherboard issue, and since it was a $200 DELL, we optedto buy another laptop.
I grabbed a used Tecra M3, been playing with it all week, games, surfing, you name it, seemed a gtood solid performer. I give it to her, she goes upstairs, plugs it in, powers on and just sits at the splash screen.
Two nephews have no issues with theirs, wondering if possible the power outlet surging and killing the systems? She's 16, so (hopefully) knows how to handle a laptop carefully.
Regardless... can't afford another dead laptop. Stuck at startup BIOS splash screen, won't go beyond that. Won't let me into the BIOS, and if I hit too many keeps too many times, laptop just beeps per keystroke.
Any advice?
Solved!
Go to Solution.

Well, not much of a support forum... 2nd posting and neither issue I had had any responses at all.
In case someone see's this because having the same issue, the hard drive was very loose, barely making contact and fell off when I touched it. Pushed it all the way back in and works fine. Pegs on the panel designed to prevent the drive from becomming lose, not very good, still allowed the drive enough wiggle room to shake loose.

Splash screen for a desktop app (non mobile app)

I'm using fb4linux, 4.5.1A SDK, I'm developing a non-mobile (i.e. desktop application) and I would like to add a splash screen to it.
I've added mobilecomponents.swc to the library path, and the application starts like this:
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
   xmlns:s="library://ns.adobe.com/flex/spark"
   xmlns:mx="library://ns.adobe.com/flex/mx"
   width="400" height="400" xmlns:local="*"
   preloader="spark.preloaders.SplashScreen"
   splashScreenImage="@Embed('assets/splashscreen.png')"
   splashScreenMinimumDisplayTime="1500">
When I debug it, no splash scren is shown and I get the following error:
ReferenceError: Error #1065: Variable flash.display::StageAspectRatio is not defined.
    at spark.preloaders::SplashScreen/prepareSplashScreen()[E:\dev\4.5.1\frameworks\projects\mobilecomponents\src\spark\preloaders\SplashScreen.as:340]
    at spark.preloaders::SplashScreen/Stage_resizeHandler()[E:\dev\4.5.1\frameworks\projects\mobilecomponents\src\spark\preloaders\SplashScreen.as:407]
The problem seems to be triggered by the line that sets the preloader, because if I remove it, the error is gone (although no splash screen is shown either).
Any ideas how to make it work?
Thanks!

import [install folder]\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0\frameworks\libs\mobile to your build path
Note: You must add the frameworks\libs\mobile\mobilecomponents.swc to the library path of the application to support the splash screen in a desktop application.

ThinkPad splash screen

Similar Messages

Maybe you are looking for