Thinkpad support is broken

Please feel free direct me to a more appropriate section for this post.
I've been trying to get Lenovo to come and replace the motherboard on my laptop. They have arranged three visits so far. One was cancelled when they left a voicemail "confirming" that they would be visiting at a different day and time. They don't seem to understand that you can only confirm something that you have previously arranged. So I had to call and cancel that one. I arranged for them to come and see me today, before noon and to call beforehand to confirm the appointment. It's noon now and they haven't arrived, and of course haven't previously called.
This support isn't free, we have paid a lot for the warranty on these systems, but the service is abysmal.

Are you enterprise?
Try contacting your account manager (the person who manages your dealings with Lenovo) and there will be a tech support person who shows up (maybe in a few days time?). Holiday period now.

Similar Messages

  • Brazilian Thinkpad support disconnecting all calls

    (why Lenovo Brazil redirects all its customers to an ENGLISH forum is beyound me, but ok).
    Hi.
    I am trying to get assistance on the 0800-701-4815, Brazilian toll free number for Thinkpad support, but the call is disconnected everytime I will be connected with a person (right after the saying "this call might be recorded"). I tried several times between 10 AM and 19 PM.
    What should I do to get support, since this is the only channel Lenovo provides? I need to fix a broken T440s under warranty.
    Thanks.
    Solved!
    Go to Solution.

    Hi Korg,
    Welcome to the Lenovo Community,
    Can you send me info on this post:
    http://forums.lenovo.com/t5/Servicios-Garantias-y/Por-Favor-Leer-antes-de-abrir-un-tema/td-p/810387
    Gracias y Saludos,
    Miguel A. González
    Spanish Community Manager
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество
    Los puntos de vista y asesoria que expreso aquí son míos y no reflejan necesariamente la posicion oficial de Lenovo.
    Es importante recalcar también que los foros suplementan los recursos de los usuarios de Lenovo pero no reemplazan el servicio técnico oficial. Para un listado de números de servicio sigue el enlace: Numeros de Soporte

  • Root RAID-1 support totally broken in Solaris 10

    Has anyone else noticed yet that support for recovery of a RAID-1 on the root partition is totally broken under Solaris 10? While one can set up a set of RAID-1 partitions for /, swap and /export/home under Solaris 10 in the same manner as Solaris 9 and the resulting RAID-1 is functional, its recovery process is not! If you power down the machine and remove one of the IDE drives making up the RAID-1 (each on their own IDE bus of course), the machine will kernel panic as expected on bootup. However unlike Solaris 9 which allows you to still login to delete the metastat database from the missing drive, Solaris 10 immediately reboots the machine upon the kernel panic. This makes the use of RAID-1 not only non-functional but actually dangerous since it doubles the chance that you will have a drive failure which will make the machine unbootable. Back to Solaris 9 for me.
    Jack

    I think you've been unfortunately hit by:
    6215065 Booting off single disk from mirrored root pair causes panic reset
    I'm currently in progress of putting a fix into the current development
    release and backporting it to s10 asap which will be available via
    a ufs patch eventually
    frankB

  • Remote Application Command-Line Support Is Broken In New iOS Client!!!

    Folks here went around and around with Microsoft trying to get them to implement support for the "remoteapplicationcmdline:s:" RDP file setting in all of the Microsoft Remote Desktop clients. Finally, sometime around version 8.0.5 Microsoft
    successfully implemented the setting (in the Mac, iOS, and Android clients). It worked flawlessly in version 8.0.6, 8.0.7, and 8.0.8, but now Microsoft has once again broken support for the setting with their latest iOS Remote Desktop client (starting with
    version 8.1.0 and going forward all the way up to the current version 8.1.4 release). It's always one step forward, and two steps backwards with Microsoft. Oy!
    Hey Microsoft can you please re-implement support for the "remoteapplicationcmdline:s:" setting in the new iOS client??? PRETTY PLEASE!!!

    Hi,
    Thanks for your feedback, i will forward your concern to the product group.
    Regards.
    Dharmesh Solanki
    TechNet Community Support

  • How long has wacom pen support been broken for.

    I remember that 6 months ago, resizing and pen support on wacom tablets using windows 8 was broken and lagged like crazy unless you turned off window ink, which means you lose pressure sensitivity. 6 months later I find out this is still the case. Are you guys for real?
    Is there any intention of ever fixing this before we remove our photoshop software for something that actually works.
    Before you go blaming Wacom and other tablet makers again, or telling people pointless stuff like checking if there's dust in their pen. Wacom said this has nothing to do with their tablet or driver. And I can confirm this, because only PS has broken wacom support.

    Just a clarification in general:
    BOILERPLATE TEXT extracted from the FAQ:
    https://forums.adobe.com/thread/375816?tstart=0
    Do not be abusive or aggressive in your tone
    An aggressive, demanding, accusatory or abusive sounding post will often evoke an aggressive or abusive and unhelpful reply.
    Remember, you are not addressing Adobe here in the user forums.  You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

  • Multiple monitor support is broken in 10.9.3 update

    One of the biggest reasons I bought a 2013 Mac PRO was the advertised claim that "It supports up to three 4K displays running simultanously".
    I need this kind of pixel pushing power.
    I do research and development that requires having a lot of information in front of me, so I run four monitors -- two Dell 2560x1600 monitors, and two DELL 1600x1200 monitors, with appropriate adaptors to convert mini-displayport to DVI and dual-link DVI (at significant additional cost).
    Up until today, it was all running beautifully and flawlessly.
    Today, I updated to 10.9.3, and only two monitors come up.  I tried rebooting, tried turning moitors on and off, tried unplugging and replugging in the monitors. I can get any two of the monitors to work, it just depends on which two I plug in first, and it doesn't matter which ports I plug them into. In any arrangement, it only sees the first two monitors I plug in and the last two just stay black.  System Preferences only knows about those first two.
    Does anyone know if it's possible to downgrade back to the previous version of the OS and how?
    Or, does anyone know about a workaround?
    Does Apple even care anymore?

    hkruse:  Thank you! Fortunately I did have a TM backup from before the update. It worked flawlessly. But I wish there had been a manual with this machine including such wonderful tidbits of info. How are we mere mortals supposed to find this stuff?  Posting to this message board and sloghing through the hit-or-miss responses is wasteful and tedious.  I lost most of one day and one morning because of this "update'.
    It makes me wonder how many millions of person-hours are lost that could have been avoided by one or two engineers taking their job a little more serioustly, with a management staff that backs them up? 
    When I worked at IBM (early 1990s), I was on the QA team for AIX. We had a whole roomfull of technicians who were constantly developing, refining, running and documenting suites of regression tests on AIX and every enhancement in the pipeline. Does no one do this anymore?
    I've also contributed to Linux back in the 90's and was shocked at how easy it was to get code included in that package-- one of the reasons I don't trust Linux today (I love it for a playground environment, but I'd never rely on it for serious work!)
    Companies like Apple and Microsoft have a social reponsibility to make these critical systems efficient and reliable. I wish they'd spend a lot less time making things cute (the bouncing text bubbles in the IOS texting app, for instance, or the skeumorphic shifting background on IOS home screens, etc.) and spend more time and effort to make things rock solid, so they "just work".  That was the reason I switched to Apple eight years ago. Not because it was pretty.
    Go ahead and make it pretty, but don't stop at "it works", keep going until you're sure it won't fail. It's easy to write code that works. Harder and more important to write code that won't fail. Anyone who doesn't understand the differrence is not a seasoned coder.
    Thanks for Time Machine. I'd be screwed without that.  Now please give us the documentation to use it! (and the PRAM, the SMC, anything else that we ought to know about to rescure us from these premature, half-cocked updates...) Here's an idea: Print a reference manual and put it int he box with a new machine. I make educational model kits these days, and every one of my products comes with a manual. If I can do it, why can't you?  A 70 page perfect-bound manual costs less than $2 to print. Seriously.
    Does anyone know how to disable these App Store update reminders?  I hate having to click "remind me later" then "tomorrow" every day...  I won't be installing any more updates without researching them first (and what a further waste of time that will be!)
    Treat us right Apple. Be responsible.

  • Home screen:feature not supported gallery broken

    Hi there,
    this is my first post here so i'll try to be quick
    i foolishly tried installing the ms apps using a third party app since i saw it worked on other people's phones and i thought i would give it a shot
    i was wrong
    for about 3-4 days i've been scouring the internet trying to find a solution to the Home screen:feature not supported bug or whatever it is, but to no avail. I am starting to become a bit desperate as the gallery simply will not work no matter what i do, .jpgs wont open, and my phone has been handicapped in the most literal sense of the word. Also i've tried hard resetting twice but to no result. I've considered hacking the phone and installing a custom firmware but i didnt want to destroy  the phone completely, and also waiting for the feature pack might take too long for me.
    any help would be appreciated and i would be forever in your debt
    excuse me if i made any mistakes with my english as i am romanian 
    again thank you for your time

    Did you try to reinstall the firmware using Nokia Suite? If you are ready to loose some data then you may try the three finger format option. This will remove the installed apps. To do this switch off your phone. Then press the menu button and the camera button and the volume down button. Keep pressing the three buttons and switch on your phone. Don't leave the buttons until the Nokia hands appear. After this install the firmware again using Nokia Suite. By this method Nokia store and maps app will be lost.
    Nokia C7

  • Solaris 10 root RAID-1 support totally broken!

    I have been configuring Sun Blade 1500 with two IDE drives (each on their own IDE bus) as RAID-1 for the /, swap and /export/home partitions. This has worked well and I have always been able to test the RAID-1 recovery ability of such a configuration. However I am very unhappy to report that this functionality to totally broken in Solaris 10. For example, if you disconnect the second IDE drive of the RAID and reboot, the machine kernel panics as expected. However unlikeSolaris 9, which still allows you to login for maintanence and to delete the metastat database entries for the missing drive (thus making the machine bootable without a kernel panic), under Solaris 10 the system simply restarts immediately upon the kernel panic, This makes the RAID-1 system more than just useless but actually dangerous since it now doubles the probabity that you will had a drive failure and end up with an unbootable machine. I am very glad I tested the RAID-1 recovery ability before I installed this machine. Back to Solaris 9 for me!
    Jack

    #device          device          mount          FS     fsck     mount     mount
    #to mount     to fsck          point          type     pass     at boot     options
    /dev/md/dsk/d3      /dev/md/rdsk/d3/     /devel     ufs     1     no     -
    /dev/md/dsk/d6      /dev/md/rdsk/d6/     /prod     ufs     1     no     -
    /dev/md/dsk/d9      /dev/md/rdsk/d9/     /export/home     ufs     1     no     -
    Perhaps the problem is the mount at boot flag set to no for the /devel /prod and /export/home filesystems? If your system is up try mounting these filesystems, if that works, set the mount at boot flag to yes.
    --a                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Thinkpad T400 Screen broken

    Basically, I set my laptop down on my books too hard, and the LCD cracked(Not horribly, but I want it replaced).
    After a while of searching with lenovo's system, this is what I found:
    http://gyazo.com/b8b094e346dd7263d26c5986d48ea8b5.png
    So I assume I need an LCD with Manufacturer's P/N of 42T0495? Does it have to have that part number, or is it fine to find any other PANEL LGD 14.1" WXGA from a thinkpad, or do I have to have a LCD with the FRU number that is the same as it says on the page?
     Where would you recommend me buy the LCD?
    Any help would be appreciated.
    thanks
    Solved!
    Go to Solution.

    Will this screen work?
    http://www.ebay.com/itm/380653720307?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
    According to your posts, I think it does. But I just want to confirm.
    Also, from the photos on eBay, the some LCDs for the screen seem to have different cables on the LCD.
    When I opened up my laptop, I took a look at the back of the LCD, there was no cable runnning down from it.
    T400 screen with no cable running from it:
    http://www.ebay.com/itm/Lenovo-Thinkpad-R400-T400-14-1-LCD-WXGA-Screen-B141EW05-V-3-42T0699-grade-b-...
    Screen with Cable running down the back:
    http://www.ebay.com/itm/ThinkPad-T400-14-1-LCD-Screen-Panel-42T0580-42T0581-Samsung-LTN141W1-L05-WXG...
    Or maybe I'm just being really stupid, cause I unplugged a cable when I removed the LCD. Is that what it is?
    Take apart video I used:
    http://www.youtube.com/watch?v=i2R4oUUM5nc (skip to 3:20 for when he takes off the LCD)
    Thanks so much for your help.

  • Does OTN support resuming broken downloads?

    Hi
    I am trying to download JDeveloper3.1 from OTN..but wanted to know, whether the broken download can be resumed or have to start all over again?

    OTN uses normal UNIX style FTP. You may look into finding a program called GetRight, I believe it can do this for you on the client side.
    Take Care,
    Rob
    null

  • My experience with the French ThinkPad support

    Hi all,
    Just bought a X240 unit in october, as I have owned an IBM T41P, a Lenovo X61s and a W500 and was statisfied.
    On the 09.02 I called the ThnkPad support center as my unit don't want to start. After a short diagnostic phase ,the support girl said the motherboard have to be changed and booked an onsite tech guy for the 13.02 à 9pm.
    On the 11.02 at 3am, just called again the support to know where is the guy. They just replied he can visit until 6am. and if he did not come today, he will come tomorrow.
    Ring back again the support on the 12.02, around 3am, I have been told that the tech guy just leave me a VM, but not on my number. Quite strange as wqe checked the number when I opened the ticket. The tech was supposed to ring me back.
    Ring back again and again the support on the 13.02 as I don't have any news from the 48h onsite support. The only answer is ... we are chasing the tech.
    Today, a week after, my computer is still out of service, wihtout any update from Lenovo. If somebody got the good to know address or contact in France rather than the call center located somewhere in Romania, it could be helpful

    Serial numbers starting with 5K are white box only. They could be refurbished or new, but are coming from a China plant according to the serial number checker.
    I received a 5K white box replacement Friday, and its perfect. So if it was refurbished or new, this factory is doing a good job with them.

  • 1ST Gen Shuffle - documentation links on support site broken

    every way I try, i get 'missing resource' or some such message.

    every way I try, i get 'missing resource' or some
    such message.
    WHICH document(s) are you looking for? They seem to be working for me...

  • Worst Customer Support THINKPAD YOGA

    Worst customer support ever. I have been transferred over 10 times (I think maybe 12 times now) while trying to resolve a very simple warranty issue. I am not sure if it has been resolved yet or if its working. Will check my warranty status a week later to see if changes are reflected if not, I guess I will have to endure more horrible services until it is resolve. 
    Story goes like this
    I purchased this machine in the Microsoft Store in Toronto, I find that it is missing like 60-100 days from the warranty. I cannot register the warranty for my device online. I chat with the chat suport on lenovo website which redirected me to call the number on there. Get transfereed 6 times or something, than got told to email my proof of purchase receipt to a email with subject title involving my case. Did that few days later or a week I get a call today...
    I get a call this morning got a case number, gets transfer to Atlanta Georgia support told the guy I am frustrated very the terrible customer support gets told to F OFF basically and says they're in the US they can't do anything to get Canadian information and hanged up on me (I think his name was Kenneth? Not sure, I would love to talk with Atlanta supervisor/manager of that support place to report him).
    I call 18004267378 I luckily get the same guy which redirects me to the Atlanta support again. I received Frank who was pretty helpful gets transfer to Canada support again, Canada side couldn't help escalates me to a girl name Stephanie during the call midway the phone just hangs up/disconnect/she hangs up/I don't know... Call support again, received Canadian support, he looked at my case number and was helpful spoke with supervisor and gave me another case number.to follow up on(?).
    TLDR: Long story short, I purchased this machine from Canada but it was appearantly registered/opened in America by whom I presume to be Microsoft Store to do their "SIGNATURE" install of Windows 8.1 which activated the warranty. I get bull stories from Lenovo Thinkpad support team from Canada and USA side accusing each other they can't fix it because I purchase the machine from America from the Canada side and the American side says they can't fix it because I purchase this machine from Canada side... Constant transfers of calls and escalations brings no hope. Maybe I got lucky and the Canadian support guy said he escalated this to his supervisor. I am not sure what happens, will check my warranty status a week later if it doesn't reflect I'll call again. 
    Any mods or someone at the company here can ask for my case number and PM regarding this issue.
    This is very tragic event, probably will never ever buy anything from Lenovo anymore. If this was from Apple I probably would've gotten this issue resolved. For those who plan on buying this device from the Microsoft Store, beware they probably open the machine to install their SIGNATURE Windows 8.1 in the US and it triggers the warranty and you're stuck in limbo trying to get justice from Lenovo. 
    Thank you for listening to my rant/frustration. 
    Sincerely,
    James416

    Welcome to the Lenovo Community James !
    Sorry to hear of the run around you got. 
    In regards to the warranty date, what happened is when Lenovo sells a shipment of computers to a retailer like Microsoft, Best Buy, Tiger Direct, etc, the warranty date starts on the date of the sale.  In order to compensate for the product sitting in the retailer's warehouse or on the shelf, Lenovo will generally add an additional month to the warranty period so a 12 month warranty is now 13.  In your situation the product sat longer than expected so in these cases Lenovo Support will adjust the warranty period from the date of your purchase once they receive a copy of your receipt.  Hopefully the supervisor will be able to straighten out the matter for you. 
    Owner & Operator of the following:
    ● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
    ● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
    ★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
    ★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
    ★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
    ★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

  • [SOLVED] X11 hid support broken on fresh macbook install

    Hi!
    The solution was elementary indeed, I was missing xf86-input-keyboard and xf86-input-mouse. (looooooooooool)
    What bugs me though, is how this could happen to an already working system. From what I remember I didn't touch those drivers on my previuos system, I guess I installed them and forgot about them, but why would they break from a system update? Anyway, I guess that's nobody's concern by now. Thread solved.
    Old title: X11 hid support completely broken after system update. Now, I've completely reinstalled the system but the error remains. Please read the post below.
    I've a problem with X11 support for input devices since running pacman -Syu 2 days ago. This post contains error logs and a description of my attempts to counter the problem. The hardware is a MacBook, first generation. I'm a novice linux user but seasoned with GNU and a quick learner. The solution to this might be simple, but google didn't give me anything usable. All forum threads I found were either unsolved or irrelevant. 
    This is what has passed. (long story short, may or may not be relevant, my current problem is explained below)
    * After the first reboot since the system update, X11 didn't give me anything except a movable cursor. The screen was completely black using the xmonad wm, and when using twm, it was completely distorted with blue patterns. I start searching for sources of the trouble.
    * ALSA and pommed complain about driver errors during boot. I can't read the messages because they skip by too quickly. I remove them from rc.conf because I prefer dealing with one problem at a time.
    * modprobe complained about framebuffer_blacklist.pacsave having an erroneous extension in /etc/modprobe.d. It actually loaded both the .conf and the .pacsave. I tried swapping between this .pacsave (is it the same or opposite of a .pacorig, btw?) and the .conf. Obviously modprobe stopped complaining when there was no erroneous extension, but I didn't notice it fixing anything else. I'm unsure whether the framebuffer is even relevant.
    * I decide that the problem didn't have anything to do with modprobe. I don't know what happened exactly during this phase, but for some strange reason, the graphics cease to be jumbled. twm starts the default programs, but is not interactive. I could move the mouse, but no mouse buttons were working. Keyboard not working at all.
    * I decide to wipe X11 and hal. I also rm -rf:ed /usr/share/hal, /etc/hal, /usr/share/X11 and /etc/X11 (yeah, I got angry).
    * Reinstalled X11 and hal. Also rm -rf:ed /usr/share/hal, /etc/X11 and /usr/share/X11 (I got really angry). Stuff works now! However, setxkbmap made everything break again, both mouse and keyboard. I read the output of startx and realise evdev hasn't been loaded, since /usr/share/X11/xkb/rules/evdev is missing. The whole folder structure /usr/share/X11/xkb is actually missing. I randomly hit the target and run pacman -S xkeyboard-configure, which creates the folder structure along with the evdev ruleset.
    * The keyboard does not work when using evdev. Temporarily renaming it so that it doesn't get loaded fixes the problem. If I'm not mistaken this makes X11 revert to not-hotplugged keyboard and mouse preferences in xorg.conf (which is auto-generated). The keyboard and mouse then works again (but, obviously, not setxkbmap, and I really need input hotplugging as a laptop user).
    * It's getting late, so I shutdown and go to bed.
    Waking up today, neither keyboard nor mouse is working - also when not using evdev! I've really no idea where to go from here. I've some output for you to analyze:
    xorg.conf (auto-generated except for some commented lines I tried)
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    # Section "ServerFlags"
    # Option "AutoAddDevices" "True"
    # Option "AllowEmptyInput" "False"
    # EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dbe"
    Load "glx"
    Load "extmod"
    Load "dri2"
    Load "dri"
    Load "record"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    # Option "XkbOptions" "terminate:ctrl_alt_bksp" (this didn't work)
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Xorg.0.log
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux robban 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
    Build Date: 18 July 2009 08:27:13PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 18:07:42 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x7a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90380000/524288, 0x80000000/268435456, 0x90400000/262144, I/O @ 0x000020f0/8
    (--) PCI: (0:0:2:1) 8086:27a6:8086:7270 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90300000/524288
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 2.7.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (--) intel(0): Linear framebuffer at 0x80000000
    (--) intel(0): IO registers at addr 0x90380000 size 524288
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Monitor0
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "APP", prod id 40028
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
    (II) intel(0): Output TMDS-1 has no monitor section
    (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
    (II) intel(0): SDVOB: 1 input channel
    (II) intel(0): SDVOB: TMDS0 output reported
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Current clock rate multiplier: 1
    (II) intel(0): EDID vendor "APP", prod id 40028
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TMDS-1 disconnected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 16124 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
    (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 483584 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1934332 kB available
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): Current clock rate multiplier: 1
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f000000 physical
    (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007f600000 physical
    (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007f601000 physical
    (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007f60b000 physical
    (II) intel(0): 0x00fbf000: end of stolen memory
    (II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x00fbf000: start of memory manager
    (II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled
    (II) intel(0): 0x0f9f4000: end of memory manager
    (WW) intel(0): ESR is 0x00000010, page table error
    (WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TMDS-1 is connected to pipe none
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 286 x 179
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device HID 05ac:1000
    (**) HID 05ac:1000: always reports core events
    (**) HID 05ac:1000: Device: "/dev/input/event2"
    (II) HID 05ac:1000: Found 5 mouse buttons
    (II) HID 05ac:1000: Found x and y relative axes
    (II) HID 05ac:1000: Configuring as mouse
    (**) HID 05ac:1000: YAxisMapping: buttons 4 and 5
    (**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE)
    (**) HID 05ac:1000: (accel) keeping acceleration scheme 1
    (**) HID 05ac:1000: (accel) filter chain progression: 2.00
    (**) HID 05ac:1000: (accel) filter stage 0: 20.00 ms
    (**) HID 05ac:1000: (accel) set acceleration profile 0
    (II) config/hal: Adding input device HID 05ac:1000
    (**) HID 05ac:1000: always reports core events
    (**) HID 05ac:1000: Device: "/dev/input/event1"
    (II) HID 05ac:1000: Found keys
    (II) HID 05ac:1000: Configuring as keyboard
    (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Apple Computer Apple Internal Keyboard / Trackpad
    (**) Apple Computer Apple Internal Keyboard / Trackpad: always reports core events
    (**) Apple Computer Apple Internal Keyboard / Trackpad: Device: "/dev/input/event3"
    (II) Apple Computer Apple Internal Keyboard / Trackpad: Found keys
    (II) Apple Computer Apple Internal Keyboard / Trackpad: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Apple Computer Apple Internal Keyboard / Trackpad" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event15"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (WW) Apple Computer Apple Internal Keyboard / Trackpad: unable to handle keycode 464
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) HID 05ac:1000: Close
    (II) UnloadModule: "evdev"
    (II) HID 05ac:1000: Close
    (II) UnloadModule: "evdev"
    (II) Apple Computer Apple Internal Keyboard / Trackpad: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    startx_output.log (generated from startx &> startx_output.log)
    hostname: Host name lookup failure
    xauth: creating new authority file /root/.serverauth.5083
    X.Org X Server 1.6.2
    Release Date: 2009-7-7
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux robban 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
    Build Date: 18 July 2009 08:27:13PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 22 18:07:42 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    Setting master
    expected keysym, got XF86_Switch_VT_1: line 8 of xfree86
    expected keysym, got XF86_Switch_VT_2: line 11 of xfree86
    expected keysym, got XF86_Switch_VT_3: line 14 of xfree86
    expected keysym, got XF86_Switch_VT_4: line 17 of xfree86
    expected keysym, got XF86_Switch_VT_5: line 20 of xfree86
    / ... (There are literally hundreds of lines like this, so I'm cutting most of them) ... /
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
    > Using last definition for duplicate fields
    / ... (The above two lines repeated about 20 times) .../
    expected keysym, got XF86Display: line 68 of pc
    expected keysym, got XF86KbdLightOnOff: line 69 of pc
    expected keysym, got XF86KbdBrightnessDown: line 70 of pc
    expected keysym, got XF86_Ungrab: line 90 of keypad
    expected keysym, got XF86_ClearGrab: line 96 of keypad
    expected keysym, got XF86AudioMedia: line 26 of inet
    expected keysym, got XF86AudioPrev: line 27 of inet
    expected keysym, got XF86MonBrightnessUp: line 1806 of inet
    expected keysym, got XF86MonBrightnessDown: line 1807 of inet
    Errors from xkbcomp are not fatal to the X server
    expected keysym, got XF86_Switch_VT_1: line 8 of xfree86
    expected keysym, got XF86_Switch_VT_2: line 11 of xfree86
    expected keysym, got XF86_Prev_VMode: line 54 of xfree86
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Multiple interpretations of "NoSymbol+AnyOfOrNone(all)"
    > Using last definition for duplicate fields
    / ... (Above two lines repeated alot again) ... /
    / ... (What looks like everything above repeated once) ... /
    expected keysym, got XF86MonBrightnessUp: line 1806 of inet
    expected keysym, got XF86MonBrightnessDown: line 1807 of inet
    Errors from xkbcomp are not fatal to the X server
    /root/.xmonad/xmonad-i386-linux: executeFile: does not exist (No such file or directory)
    [i](Yeah, I know this is bad, but twm doesn't work either. I'm quite sure it has nothing to do with xmonad)[/i]
    Warning: locale not supported by Xlib, locale set to C
    Warning: X locale modifiers not supported, using default
    Failed to open input method
    Warning: locale not supported by Xlib, locale set to C
    Warning: X locale modifiers not supported, using default
    Failed to open input method
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    after 662 requests (662 known processed) with 5 events remaining.
    [i](This is from "killall X". My xinitrc has "sleep 8;killall X" appended since these problems started appearing)[/i]
    xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0.0"
    xinit: connection to X server lost.
    waiting for X server to shut down .Dropping master
    error setting MTRR (base = 0x80000000, size = 0x10000000, type = 1) Invalid argument (22)
    Output of pacman -Q: (maybe there are some conflicting drivers or something?)
    a52dec 0.7.4-4
    aalib 1.4rc5-6
    acl 2.2.47-2
    alsa-lib 1.0.20-1
    alsa-oss 1.0.17-1
    alsa-utils 1.0.20-2
    apache 2.2.11-3
    apr 1.3.5-1
    apr-util 1.3.7-1
    aspell 0.60.6-4
    at-spi 1.26.0-1
    atk 1.26.0-1
    attr 2.4.43-1
    aubio 0.3.2-3
    audiofile 0.2.6-4
    autoconf 2.63-1
    automake 1.11-1
    avahi 0.6.25-1
    bash 4.0.024-1
    bin86 0.16.17-4
    binutils 2.19.1-5
    bison 2.4.1-1
    blas 20070405-2
    bluez 4.39-1
    bzip2 1.0.5-4
    ca-certificates 20090709-1
    cabextract 1.2-2
    cairo 1.8.8-1
    cairomm 1.8.2-1
    cdargs 1.35-2
    cdparanoia 10.2-2
    chmlib 0.40-1
    cloog-ppl 0.15.3-1
    compositeproto 0.4-2
    confuse 2.6-1
    consolekit 0.3.0-5
    coreutils 7.4-1
    cpio 2.9-5
    cpufrequtils 005-2
    cracklib 2.8.13-2
    cryptsetup 1.0.6-3
    csup 20060318-5
    curl 7.19.5-2
    damageproto 1.1.0-2
    dash 0.5.5.1-2
    db 4.7.25.4-1
    db4.1 4.1.25-2
    dbus 1.2.14-1
    dbus-core 1.2.14-1
    dbus-glib 0.80-1
    dcron 3.2-4
    desktop-file-utils 0.15-1
    device-mapper 1.02.33-1
    dhcpcd 5.0.6-1
    dialog 1.1_20080819-2
    diffutils 2.8.1-6
    dmapi 2.2.10-1
    dmenu 4.0-1
    dmidecode 2.10-1
    dmxproto 2.2.2-2
    docbook-xml 4.5-2
    doxygen 1.5.9-1
    dri2proto 2.1-1
    dwm 5.6-1
    dzen2 0.8.5-4
    e2fsprogs 1.41.8-1
    ed 1.3-1
    eject 2.1.5-4
    emacs 22.3-2
    enca 1.9-4
    enchant 1.4.2-1
    esound 0.2.41-1
    eventlog 0.2.9-1
    exempi 2.1.0-1
    exiv2 0.18-1
    expat 2.0.1-2
    faac 1.28-1
    faad2 2.7-1
    fakeroot 1.12.4-1
    fam 2.7.0-14
    feh 1.3.4-5
    ffmpeg 0.5-1
    fftw 3.2.1-1
    file 5.03-2
    filesystem 2009.01-2
    findutils 4.4.2-1
    firefox 3.5.1-1
    fixesproto 4.0-3
    flac 1.2.1-1
    flashplugin 10.0.22.87-1
    flex 2.5.35-3
    fluidsynth 1.0.9-1
    fontcacheproto 0.1.2-2
    fontconfig 2.6.0-2
    fontsproto 2.0.2-2
    fox 1.6.36-1
    freetype2 2.3.9-2
    fribidi 0.19.2-1
    fuse 2.7.4-3
    gawk 3.1.6-3
    gc 7.1-1
    gcc 4.4.0-5.1
    gcc-libs 4.4.0-5
    gconf 2.26.2-2
    gdbm 1.8.3-6
    gen-init-cpio 2.6.17-3
    gettext 0.17-3
    ghc 6.10.3-1
    giblib 1.2.4-4
    giflib 4.1.6-3
    glib 1.2.10-7
    glib2 2.20.4-1
    glibc 2.10.1-3
    glibmm 2.20.1-1
    gmp 4.3.1-2
    gmrun 0.9.2-2
    gnutls 2.8.1-1
    gpm 1.20.6-1
    grep 2.5.4-3
    groff 1.20.1-2
    grub 0.97-15
    gsfonts 8.11-5
    gstreamer0.10 0.10.23-1
    gstreamer0.10-base 0.10.23-1
    gstreamer0.10-base-plugins 0.10.23-2
    gstreamer0.10-ffmpeg 0.10.7-1
    gstreamer0.10-good 0.10.15-1
    gtk 1.2.10-9
    gtk-engines 2.18.2-1
    gtk2 2.16.5-1
    gtkmm 2.16.0-1
    gvim 7.2.65-1
    gzip 1.3.12-6
    hal 0.5.12git20090421.4fc367-2
    hal-info 0.20090414-1
    haskell-utf8-string 0.3.5-1
    haskell-x11 1.4.5-1.2
    haskell-x11-xft 0.3-5
    hdparm 9.15-1
    heimdal 1.2.1-5
    herrie 2.2-2
    hicolor-icon-theme 0.10-2
    hunspell 1.2.8-1
    hwdetect 2009.07-1
    imlib2 1.4.2-3
    initscripts 2009.03-2
    inputproto 1.5.0-1
    intel-dri 7.5-1
    iputils 20071127-2
    irssi 0.8.13-1
    iso-codes 3.10.1-1
    jack-audio-connection-kit 0.116.2-2
    jdk 6u14-1
    jfsutils 1.1.14-1
    jre 6u14-1
    kbd 1.15-1
    kbproto 1.0.3-2
    kernel-headers 2.6.30.1-1
    kernel26 2.6.30.1-1
    kernel26-firmware 2.6.30-1
    klibc 1.5.15-3
    klibc-extras 2.5-4
    klibc-kbd 1.15.20080312-10
    klibc-module-init-tools 3.8-1
    klibc-udev 141-3
    ladspa 1.13-2
    lame 3.98.2-2
    lapack 3.2.1-1
    lcms 1.18-2
    less 429-1
    lesstif 0.95.0-3
    libao 0.8.8-2
    libarchive 2.7.0-2
    libart-lgpl 2.3.20-1
    libass 0.9.6-2
    libavc1394 0.5.3-3
    libbeagle 0.3.9-1
    libbonobo 2.24.1-1
    libcaca 0.99.beta16-1
    libcanberra 0.14-1
    libcap 2.16-3
    libcddb 1.3.2-1
    libcdio 0.81-2
    libcups 1.3.11-1
    libdaemon 0.13-2
    libdatrie 0.2.2-1
    libdca 0.0.5-1
    libdmx 1.0.2-2
    libdownload 1.3-3
    libdrm 2.4.12-1
    libdv 1.0.0-2
    libdvbpsi 0.1.6-3
    libdvdnav 4.1.3-1
    libdvdread 4.1.3-1
    libebml 0.7.8-1
    libexif 0.6.17-1
    libfontenc 1.0.4-2
    libftdi 0.15-3
    libgcrypt 1.4.4-2
    libgl 7.5-1
    libglade 2.6.4-1
    libgpg-error 1.6-1
    libgtop 2.26.1-1
    libical 0.43-1
    libice 1.0.5-1
    libid3tag 0.15.1b-3
    libidl2 0.8.13-1
    libiec61883 1.2.0-1
    libjpeg 7-1
    libldap 2.3.43-3
    liblo 0.25-1
    liblrdf 0.4.0-6
    libmad 0.15.1b-4
    libmatroska 0.8.1-2
    libmikmod 3.1.12-2
    libmng 1.0.10-2
    libmodplug 0.8.7-1
    libmp4v2 1.6-1
    libmpcdec 1.2.6-1
    libmpd 0.18.0-1
    libmpeg2 0.5.1-1
    libmtp 0.3.7-1
    libmysqlclient 5.1.36-1
    libnl 1.1-1
    libnotify 0.4.5-1.1
    libogg 1.1.3-2
    liboil 0.3.16-1
    libpcap 1.0.0-1
    libpciaccess 0.10.6-1
    libpng 1.2.38-1
    libproxy 0.2.3-1
    libraw1394 2.0.2-1
    libsamplerate 0.1.7-1
    libsasl 2.1.23-1
    libsexy 0.1.11-1
    libshout 2.2.2-3
    libsigc++2.0 2.2.3-1
    libsm 1.1.0-1
    libsndfile 1.0.20-3
    libtasn1 2.2-1
    libthai 0.1.12-1
    libtheora 1.0-1
    libtiff 3.8.2-5
    libtirpc 0.2.0-1
    libtool 2.2.6a-2
    libtorrent 0.12.2-2
    libtracker 0.6.95-1
    libunique 1.0.8-1
    libusb 0.1.12-3
    libv4l 0.5.99-1
    libvisual 0.4.0-2
    libvorbis 1.2.1rc1-2
    libwnck 2.26.2-1
    libx11 1.2.1-1
    libx86 1.1-2
    libxau 1.0.4-1
    libxaw 1.0.6-1
    libxcb 1.2-1
    libxcomposite 0.4.0-2
    libxcursor 1.1.9-2
    libxdamage 1.1.1-2
    libxdmcp 1.0.2-2
    libxext 1.0.5-2
    libxfce4util 4.6.1-1
    libxfcegui4 4.6.1-1
    libxfixes 4.0.3-2
    libxfont 1.4.0-1
    libxfontcache 1.0.4-2
    libxft 2.1.13-1
    libxi 1.2.1-1
    libxinerama 1.0.3-2
    libxkbfile 1.0.5-1
    libxklavier 3.9-2
    libxml2 2.7.3-2
    libxmu 1.0.4-2
    libxp 1.0.0-2
    libxpm 3.5.7-1
    libxrandr 1.3.0-1
    libxrender 0.9.4-2
    libxres 1.0.3-2
    libxslt 1.1.24-2
    libxspf 1.2.0-1
    libxss 1.1.3-1
    libxt 1.0.6-1
    libxtst 1.0.3-2
    libxv 1.0.4-1
    libxvmc 1.0.4-2
    libxxf86dga 1.0.2-2
    libxxf86misc 1.0.1-2
    libxxf86vm 1.0.2-1
    licenses 2.4-1
    links 2.2-2
    lirc-utils 0.8.5-1
    lm_sensors 3.1.1-1
    logrotate 3.7.8-1
    lrmi 0.10-1
    lua 5.1.4-4
    lvm2 2.02.48-1
    lzo2 2.03-1
    m4 1.4.13-1
    madwifi 0.9.4.3952-5
    madwifi-utils 0.9.4.3952-1
    mailx 8.1.1-7
    make 3.81-4
    man-db 2.5.5-2
    man-pages 3.21-1
    mcpp 2.7.2-2
    mdadm 2.6.9-1
    mesa 7.5-1
    mime-types 1.0-2
    mkinitcpio 0.5.25-1
    mlocate 0.22-1
    module-init-tools 3.8-1
    mozilla-common 1.4-1
    mozplugger 1.12.1-1
    mpd 0.14.2-1
    mpfr 2.4.1-1
    mysql 5.1.36-1
    mysql-clients 5.1.36-1
    nano 2.0.9-2
    ncurses 5.7-2
    net-tools 1.60-14
    netbeans 6.7-1
    nspr 4.8-1
    nss 3.12.3-1
    openssl 0.9.8k-4
    orbit2 2.14.17-1
    pacman 3.2.2-1
    pacman-mirrorlist 20090616-1
    pam 1.0.4-1
    pango 1.24.5-1
    pangomm 2.24.0-1
    patch 2.5.9-2
    pciutils 3.1.2-1
    pcmciautils 015-2
    pcre 7.9-1
    perl 5.10.0-6
    perl-xml-simple 2.18-2
    perlxml 2.36-1
    php 5.2.10-3
    pixman 0.14.0-2
    pkgconfig 0.23-1
    pm-utils 1.2.5-1
    policykit 0.9-9
    pommed 1.26-3
    popt 1.14-1
    ppl 0.10.2-2
    ppp 2.4.4-9
    printproto 1.0.4-1
    procinfo 19-3
    procps 3.2.8-1
    psmisc 22.7-1
    pycairo 1.8.6-1
    pygobject 2.18.0-1
    pygtk 2.14.1-4
    python 2.6.2-5
    python-gdata 1.3.1-1
    python-numpy 1.3.0-2
    qt 4.5.2-3
    rake 0.8.6-1
    randrproto 1.3.0-1
    raptor 1.4.18-1
    rarian 0.8.1-1
    readline 6.0.003-1
    recode 3.6-3
    recordproto 1.13.2-2
    reiserfsprogs 3.6.21-1
    renderproto 0.9.3-2
    rp-pppoe 3.10-1
    rpcbind 0.2.0-1
    rtorrent 0.8.2-3
    ruby 1.8.7_p174-1
    rubygems 1.3.3-1
    run-parts 3.1.3-1
    rxvt-unicode 9.06-2
    schismtracker 0.5rc1-1
    screen 4.0.3-8
    scrnsaverproto 1.1.0-2
    sdl 1.2.13-3
    sdl_image 1.2.7-2
    sdparm 1.03-2
    sed 4.2.1-1
    shadow 4.1.4.1-1
    shaman 1.0.9-1
    shared-mime-info 0.60-1
    smbclient 3.3.6-2
    sound-theme-freedesktop 0.2-1
    speex 1.2rc1-1.1
    sqlite3 3.6.15-2
    startup-notification 0.10-1
    sudo 1.7.2-1
    sysfsutils 2.1.0-5
    syslog-ng 3.0.3-1
    sysvinit 2.86-5
    t1lib 5.1.2-2
    taglib 1.5-1
    tar 1.22-1
    tcp_wrappers 7.6-10
    tdb 3.3.6-1
    terminus-font 4.28-1
    texinfo 4.13a-3
    ttf-dejavu 2.29-1
    tzdata 2009j-1
    udev 141-3
    unixodbc 2.2.14-2
    unrar 3.9.4-1
    unzip 6.0-4
    uriparser 0.7.5-1
    usbutils 0.84-1
    util-linux-ng 2.14.2-1
    vbetool 1.1-1
    vi 7.2.65-1
    videoproto 2.2.2-2
    vim 7.2.65-1.1
    vim-minibufexpl 6.3.2-4
    w3m 0.5.2-3
    wavpack 4.50.1-1
    wget 1.11.4-1
    which 2.20-1
    wireless_tools 29-3
    wpa_supplicant 0.6.9-2
    x264 20090416-1
    xbitmaps 1.0.1-2
    xcb-proto 1.4-1
    xcb-util 0.3.4-2
    xcursor-themes 1.0.1-2
    xextproto 7.0.5-1
    xf86-input-evdev 2.2.2-1
    xf86-input-synaptics 1.1.2-1
    xf86-video-intel 2.7.99.902-1
    xf86dgaproto 2.0.3-2
    xf86miscproto 0.9.2-2
    xf86vidmodeproto 2.2.2-2
    xfconf 4.6.1-1
    xfe 1.19.2-1
    xfsprogs 3.0.1-1
    xineramaproto 1.1.2-2
    xkeyboard-config 1.6-1
    xmlrpc-c 1.06.35-1
    xmobar 0.9.2-1
    xmonad 0.8.1-1.2
    xmonad-contrib 0.8.1-1.2
    xorg-apps 7.4-2
    xorg-font-utils 7.4-2
    xorg-fonts-100dpi 1.0.1-2
    xorg-fonts-75dpi 1.0.1-2
    xorg-fonts-alias 1.0.1-2
    xorg-fonts-encodings 1.0.2-3
    xorg-fonts-misc 1.0.0-4
    xorg-res-utils 1.0.3-3
    xorg-server 1.6.2-1
    xorg-server-utils 7.4-6
    xorg-twm 1.0.4-3
    xorg-utils 7.4-4
    xorg-xauth 1.0.3-1
    xorg-xinit 1.1.1-1
    xorg-xkb-utils 7.4-2
    xpacman 0.11-4
    xpdf 3.02_pl3-1
    xproto 7.0.15-1
    xterm 243-2
    xulrunner 1.9.1.1-1
    xvidcore 1.2.1-1
    xz-utils 4.999.8beta-4
    zenity 2.26.0-2
    zip 3.0-1.1
    zlib 1.2.3.3-3
    zsh 4.3.10-1
    zvbi 0.2.26-1
    Any help would be greatly appreciated! This is too much for me to handle by myself. I'm thinking of trying debian if I can't sort this out, so be a patriot!
    Love,
    sapht
    Last edited by sapht (2009-07-23 17:45:07)

    Alright, I got fed up and decided to reinstall the system.
    Only installed wireless_tools, madwifi, hal, xorg and xf86-video-intel.
    Edited /etc/X11/xorg.conf to select the intel video driver.
    The mouse and keyboard are still frozen.
    Here are some much cleaner Xorg.0.log, xorg.conf and startx_output.log files, I hope it will be easier for any readers of this post to find errors here:
    Output of startx:
    hostname: Host name lookup failure
    xauth: creating new authority file /root/.serverauth.4956
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.1.901 (1.6.2 RC 1)
    Release Date: 2009-5-8
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux datan 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
    Build Date: 28 June 2009 11:20:52AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 23 13:37:55 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    Setting master
    (again, this is where 'killall X' from xinitrc runs)
    XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
    after 507 requests (507 known processed) with 2 events remaining.
    xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0.0"
    xinit: connection to X server lost.
    waiting for X server to shut down .Dropping master
    error setting MTRR (base = 0x80000000, size = 0x10000000, type = 1) Invalid argument (22)
    xorg.conf
    Section "Device"
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    EndSection
    # Section "ServerLayout"
    # Identifier "X.org Configured"
    # Screen 0 "Screen0" 0 0
    # InputDevice "Mouse0" "CorePointer"
    # InputDevice "Keyboard0" "CoreKeyboard"
    # EndSection
    # Section "Files"
    # ModulePath "/usr/lib/xorg/modules"
    # FontPath "/usr/share/fonts/misc"
    # FontPath "/usr/share/fonts/100dpi:unscaled"
    # FontPath "/usr/share/fonts/75dpi:unscaled"
    # FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # EndSection
    # Section "Module"
    # Load "extmod"
    # Load "glx"
    # Load "record"
    # Load "dri"
    # Load "dri2"
    # Load "dbe"
    # EndSection
    And Xorg.0.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.1.901 (1.6.2 RC 1)
    Release Date: 2009-5-8
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH i686
    Current Operating System: Linux datan 2.6.30-ARCH #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009 i686
    Build Date: 28 June 2009 11:20:52AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 23 13:33:48 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    (**) | |-->Device "Card0"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x640
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90380000/524288, 0x80000000/268435456, 0x90400000/262144, I/O @ 0x000020f0/8
    (--) PCI: (0:0:2:1) 8086:27a6:8086:7270 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0x90300000/524288
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 2.7.99
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
    (--) intel(0): Chipset: "945GM"
    (--) intel(0): Linear framebuffer at 0x80000000
    (--) intel(0): IO registers at addr 0x90380000 size 524288
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (--) intel(0): Using UXA for acceleration
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA has no monitor section
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "APP", prod id 40028
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
    (II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
    (II) intel(0): Output TMDS-1 has no monitor section
    (II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
    (II) intel(0): SDVOB: 1 input channel
    (II) intel(0): SDVOB: TMDS0 output reported
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Current clock rate multiplier: 1
    (II) intel(0): EDID vendor "APP", prod id 40028
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TMDS-1 disconnected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): detected 256 kB GTT.
    (II) intel(0): detected 16124 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
    (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
    (WW) intel(0): PIPEASTAT before: status:
    (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 483584 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1934332 kB available
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Framebuffer compression enabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): Current clock rate multiplier: 1
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f000000 physical
    (II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007f600000 physical
    (II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007f601000 physical
    (II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007f60b000 physical
    (II) intel(0): 0x00fbf000: end of stolen memory
    (II) intel(0): 0x00fbf000-0x0f9f3fff: DRI memory manager (239828 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): BO memory allocation layout:
    (II) intel(0): 0x00fbf000: start of memory manager
    (II) intel(0): 0x01000000-0x017fffff: front buffer (8192 kB) X tiled
    (II) intel(0): 0x0f9f4000: end of memory manager
    (WW) intel(0): ESR is 0x00000010, page table error
    (WW) intel(0): PGTBL_ER is 0x00000102, host pte data, display B pte
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is off
    (II) intel(0): Display plane B is now disabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane A is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe none
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TMDS-1 is connected to pipe none
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 286 x 179
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device HID 05ac:1000
    (**) HID 05ac:1000: always reports core events
    (**) HID 05ac:1000: Device: "/dev/input/event2"
    (II) HID 05ac:1000: Found 5 mouse buttons
    (II) HID 05ac:1000: Found x and y relative axes
    (II) HID 05ac:1000: Configuring as mouse
    (**) HID 05ac:1000: YAxisMapping: buttons 4 and 5
    (**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE)
    (**) HID 05ac:1000: (accel) keeping acceleration scheme 1
    (**) HID 05ac:1000: (accel) filter chain progression: 2.00
    (**) HID 05ac:1000: (accel) filter stage 0: 20.00 ms
    (**) HID 05ac:1000: (accel) set acceleration profile 0
    (II) config/hal: Adding input device HID 05ac:1000
    (**) HID 05ac:1000: always reports core events
    (**) HID 05ac:1000: Device: "/dev/input/event1"
    (II) HID 05ac:1000: Found keys
    (II) HID 05ac:1000: Configuring as keyboard
    (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Apple Computer Apple Internal Keyboard / Trackpad
    (**) Apple Computer Apple Internal Keyboard / Trackpad: always reports core events
    (**) Apple Computer Apple Internal Keyboard / Trackpad: Device: "/dev/input/event3"
    (II) Apple Computer Apple Internal Keyboard / Trackpad: Found keys
    (II) Apple Computer Apple Internal Keyboard / Trackpad: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Apple Computer Apple Internal Keyboard / Trackpad" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event15"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) HID 05ac:1000: Close
    (II) UnloadModule: "evdev"
    (II) HID 05ac:1000: Close
    (II) UnloadModule: "evdev"
    (II) Apple Computer Apple Internal Keyboard / Trackpad: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    Reading Xorg.0.log myself, I find nothing that would imply the input devices have been erroneosly loaded. What is going on? Surely I must have missed something?
    Best regards,
    sapht

  • Yoga S1 Windows 8.1 Activation Disabled and poor (or no support from Lenovo at all).

    Dear Lenovo Friends,
    I've purchased Thinkpad Yoga S1 with Windows 8.1 onboard.
    I've had an OS problem that leaded me to order Recovery DVDs via Lenovo Thinkpad Support in Poland (thanks, got disc set in 7 days).
    After reinstallation the WIndows 8.1 OS keeps saying my licence code embedded into BIOS is invalid and I can no longer activate the system. See the event log for sample try and fail on activation my system, please.
    Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
      <Provider Name="Microsoft-Windows-Security-SPP" Guid="{E23B33B0-C8C9-472C-A5F9-F2BDFEA0F156}" EventSourceName="Software Protection Platform Service" />
      <EventID Qualifiers="32768">1017</EventID>
      <Version>0</Version>
      <Level>2</Level>
      <Task>0</Task>
      <Opcode>0</Opcode>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-01-09T20:02:04.000000000Z" />
      <EventRecordID>1866</EventRecordID>
      <Correlation />
      <Execution ProcessID="0" ThreadID="0" />
      <Channel>Application</Channel>
      <Computer>n316-pc04</Computer>
      <Security />
      </System>
    - <EventData>
      <Data>0xC004F069</Data>
      <Data>9D6TC</Data>
      <Data>?</Data>
      <Data>?</Data>
      </EventData>
      </Event>
    I've contacted the Lenovo Support in Poland and they tend to tell that this is because Microsoft has invalidated my codes for unknown reason. Contacting Microsoft they told me that it its vendor's (Lenovo) problem and they are not responsible - shall I obtain new licence key from Lenovo. The Polish Thinkpad support is working on the problem since January the 9th, with no success.
    The Windows grace period is already over and I cannot use my ultrabook now without activating the licence.
    Is this the famous Thinkpad support quality? I already own 4 Thinkpads and sorry gyus but I'm considering swithing to some other vendor.
    When I called them, the solution provided by the Thinkpad support was... "would you please reainstall the OS once more to get another grace period?" I was thinking it was a kind of joke, but it wasn't... Asking for the responsibility of the Lenovo for the Windows OS they provided I was told that Lenovo is not responsible and I was given the advice to buy the hardware with no OS next time, have box licence from Microsoft separatelly.
    I'm really disappointed. This is my last Thinkpad I believe. It seems even having the warranty it is not enoug to get support from Lenovo - I'm on my own...
    Regards,
    P.
    Solved!
    Go to Solution.

    Solved!
    Finally I've got another DVD recovery set from Lenovo. Now it works. Seems that the first DVD set was invalid .
    Regards,
    P.

Maybe you are looking for

  • How can I sync all my music but a certain playlist?

    Is there any way i can make my itunes sync all my music to my ipod except a certain playlist? For example, i have about 30 or so Christmas songs that i'd rather not have come on randomly when i leave my ipod plugged in and on shuffle. I realize I can

  • Pdf to xlsx

    Converted PDF to xlsx and text and numbers are garbled and worthless, have also tried with text recognition disabled and get the same results. Outcome is useless and provides no benefit what so ever.

  • Fingerprint reader problem

    hi, i got the same problem like everybody , fingerprint issue. the thing is all the solution listed is no help. I cant rollback the driver, I cant see any fingerprint reader in the device manager. I've update my digitapersona to v4.11 but still it ca

  • Photoshop Cs5 64bit Middle East urdu writing problem

    hi i have win7 64bit and i install PS cs5 64bit but i not support urdu then i install 32bit then then it work but why 64bit version not work with urdu language properly

  • Adding count total column .

    Hi, I'm dealing with 9.2.0.8 so some restrictions may apply :). here is the case SQL> create table t (id number) ; Table created. SQL> insert into t values(1); 1 row created. SQL> insert into t values(1); 1 row created. SQL> insert into t values(1);