Thinkpad T-60 New Adapter, No Power

Hello folks   This laptop was working perfectly until one day when my AC cord wasn't in the best shape (it was a frayed at the plug in point.  Dog chewed it.) I plugged it in and it sparked, after that it lost the ability to charge the battery. Still running on battery power it worked perfectly. So I ordered a new IBM AC power adapter just like the factory one, no satisfaction, tested adapter with TVM and all was good with adapter. Tried ATX Reset, no joy.   So the laptop works perfectly with battery power it just doesnt charge!  Can anyone help me??
Thanks,
Mark

you probably caused an electrical short in the power plug of the laptop. Hopefully you would just need to change the power plug and it will fix the problem. Otherwise you are looking at a new motherboard.
You maybe able to power the laptop through AC using a port replicator, advanced mini dock, etc, which can provide ac power through the dock connector.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • 65W 20V AC Adapter gets super hot (including new adapter replaced on warranty)

    I bought a e420 in March and the 65W 20V AC adapter it came with has always ran really hot. Hot enough you can't really hold it while using the laptop while it's plugged in. When the laptop is off and charging, it's very cool. Now I just recieved a new adapter through warranty and it also gets really hot.
    I also ordered my e420 with the big 9-cell battery, could that effect it? I'm also worried it has been killing my battery life as well, as it's much lower now on full charge than when it was new 7 months ago. I try to take care of the battery by almost always let it run down before charging it and don't use it plugged in unless i have too. 
    Would appreciate any thoughts on this. i see several random posts about hot ac adapters on the forum here but found no real conclusions.
    -Thanks

    Hi synovo,
    May i have the machine type please? If your machine equipped with descrete graphic please disconnect immediately for safety reason, and use 90W AC instead. Anyway please contact local lenovo for further info
    Worldwide Support Center phone list for ThinkPad, ThinkCentre and ThinkStation systems
    http://support.lenovo.com/en_US/detail.page?DocID=​PD008370
    Fred
    T61 + X201i

  • Creating a new adapter in sap pi

    Hi experts,
    I got a requirement to configure custamised adaptor for the sibel systems.
    Can you please provide information to build a new adapter in sap pi 7.1.
    Thankyou in advance......

    Hi,
    This [wiki|http://wiki.sdn.sap.com/wiki/display/XI/XIlibrariesfor+development] link should help get you started.  I have a very useful PDF too that describes some of the steps but unfortunately I don't have the link where I got it from.
    Regards,
    Ryan Crosby

  • New adapter creation in Pi 7.0

    hi
    i have recently attended the sapteched and there is a session on new adapter development. unfortunately i could not attend it. when i was going through the excercise doc i have come across the below lines.
    Change the file contents of all the files in sample_ra.jar.
    The files contain the package name/path of the sample_ra adapter. We will have to change them
    to our own package/path names. When doing so, text editors such as TextPad or UltraEdit can
    be used to perform changes to all the files at once, easing the process. (Please note also, instead
    of using text editors, all the files can be loaded into NWDS and use the u201CRefactoru201D and search-nreplace
    capabilities within NWDS to accomplish the same.)
    a. Change package name:
    From: com.sap.aii.af.sample.adapter.ra
    To: com.test.zip.adapter.ra
    b. Change package path for log and trace file locations:
    From: com/sap/aii/af/sample/adapter/ra
    To: com/test/zip/adapter/ra
    c. Change adapter guid:
    From: http://sap.com/xi/XI/sample/JCA
    To: http://sap.com/xi/XI/zip/JCA
    d. Change adapter namespace:
    From: http://sap.com/xi/XI/sample
    To: http://sap.com/xi/XI/zip
    i have download the sample_ra.rar and unzipped the  jar file sample_ra.jar file. after that i am not sure where i need to change the package names and adapter namespace and other things. There are several java files where the package statemetns is used. please clarify.
    thanks
    sankar

    hi
    thanks for the reply . i figured out how to change the package name .but i could not find out how to change the below . where can i find these entries.
    . Change package path for log and trace file locations:
    From: com/sap/aii/af/sample/adapter/ra
    To: com/test/zip/adapter/ra
    d. Change adapter namespace:
    From: http://sap.com/xi/XI/sample
    To: http://sap.com/xi/XI/zip
    thanks
    sankar

  • How to  add new Adapter in Sap XI

    could you help me to how to add a new Adapter in SAP XI
    after installation of SAP XI.
    if any one send this really help full to me
    Ram

    Hi,
    I am getting an error when importing SAP Basis 640 Software components into Integration repository. It is giving thsese java errors:
    com.sap.engine.services.ejb.exceptions.BaseRemoteException: Exception in method importFromImportSource. at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10.importFromImportSource(TransportServiceRemoteObjectImpl10.java:850) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl10p4_Skel.dispatch(TransportServiceRemoteObjectImpl10p4_Skel.java:100) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.lang.NoClassDefFoundError at com.sap.aii.utilxi.core.strings.StringConversion.xml2String(StringConversion.java:645) at com.sap.aii.utilxi.dtd.api.DtdHelper.getString(DtdHelper.java:381) at com.sap.aii.utilxi.dtd.api.DtdParser.parseInputSource(DtdParser.java:68) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getDtdSchema(DtdInternalExternalCategoryService.java:72) at com.sap.aii.ibrep.bom.extdef.DtdInternalExternalCategoryService.getExternalReferences(DtdInternalExternalCategoryService.java:48) at com.sap.aii.ibrep.bom.extdef.ExternalCategoryServiceImpl.getExternalReferences(ExternalCategoryServiceProvider.java:51) at com.sap.aii.ibrep.bom.extdef.ExternalDefinition.getExternalReferences(ExternalDefinition.java:35) at com.sap.aii.ibrep.server.persist.extdef.ExtDefInternalPersistSevice.writeTypeData(ExtDefInternalPersistSevice.java:95) at com.sap.aii.ib.server.persist.gen.PersistServiceProvider$PersistServiceImpl.writeObjectVersion(PersistServiceProvider.java:446) at
      The environment is same as in our development server.
    Any idea what causes this error.
    Thanks for your help.
    Madhu

  • Cretaing a new adapter using the existing file adapter

    Hi,
    Is it possible to create a new adapter type copying the existing file adapter. That is I want to create a new adapter type for example "FNFS" and use the same module callsapadapter which is used in the File adapter. So that this new adapter type "FNFS" functions like the File adapter,
    What are the actions I need to perform to acheive this.
    Thanks in advance.

    what will be the significance of that?
    I think if you need some extra functionality then Development of Custom Module is enough.
    /people/john.ta2/blog/2006/12/20/to-create-or-not-to-create-an-sap-xi-adapter
    Thanks
    farooq.

  • Jco.JCO$Exception when create a new adaptive model in NWDS

    HI friends:
    when I create a new adaptive model in NWDS, error occurs:
    Warning:Creating a connection with Metamodel language <zh_CN> failed. Continuing with language <zh>
    Fatal: com.sap.mw.jco.JCO$Exception: Missing R3NAME=... or ASHOST=... in connect_param in RfcOpenEx
    but when I used a existent model to reimport model  , it has no error
    Thank you in advance.
    Yonk
    Edited by: Yonk King on Nov 7, 2008 11:11 AM

    Check whether you are providing the correct login credentials while importing the RFC.

  • Possible to AVOID RECHARGING while using AC adapter to power up on Zen Tou

    Hi there,
    I would really want to know if there's a possibilty that I can use the supplied AC adapter only for powering up the Zen Touch, but not recharging the battery everytime I plug in the adapter?
    For example I've some amount of charge in the battery but want to spare that part for a walk outside in the afternoon. Meanwhile I want to power up my Zen with the AC adapter at home. But everytime I plug in the adapter, it starts to recharge. Well, recharging the battery when it's not fully empty would probably reduce its overall life. So what should I do?
    I saw a display symbol consisting of a "small plug" icon (not a "plug in a battery" icon) on the users guide with an explanation: "using AC adapter to power up"
    Is it possible? Thank you very much at all.
    Best Regards
    Adnan AK, MD.

    There's no way to disable it, but it's actually very good for Lithium Ion batteries to be charged in a shallow way. More here on batteries.

  • I have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?

    This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.

  • Could macbook starts without battery by using adapter as power source!!??

    Hi all
    I have macbook black early 2008 model. My battery is damaged as it falls in water.
    I have experienced that If the adapter is plugged with macbook and macbook is on and then i remove the battery ...its remain on...
    My question is this that could macbook starts without battery using the power adapter as power source.
    Thanks
    Regards
    Abdul Azeez

    Yes it will start and run. The downside is your MacBook will run slower and if you accidentally pull out the plug it will shut off immediately and you'll lose any work that hasn't been saved. I suggest replacing the battery when you can.

  • Developing New Adapter

    Hi,
    I have a requirement that we need to develop a new adapter to communicate between .NET system & SAP XI. Can you help me how can we do that. Please dont ask why , i am not sure why..
    Both the system will communicate thro XML.
    Raja T

    Raja,
    Have you seen this weblogs how to communicate between XI and .Net:
    https://weblogs.sdn.sap.com/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    https://weblogs.sdn.sap.com/pub/wlg/1442 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    For info on how to use Webservices and SOAP adapters , these 2 documents should help,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79
    ---Satish

  • Create New Adapter for BPEL

    Hallo, I would like to write my own new adapter in JDeveloper to work with BPEL process. Can anybody put here any links about tis topic.... I couldn't find

    John is right. But this might be a good place to start:
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b31005/intgn.htm#CJHCIJJI
    Jan Kettenis

  • Is S10 compatible with Thinkpad 90W Slim AC adapter?

    Hello,
    Is S10 compatible with Thinkpad 90W Slim AC adapter?
    Or are there plans to sell appropriate jack for this adapter (as is the case with many mobiles and PDAs)?
    Best regards,
    John J. Ruthe

    I would really like to know this as well.
    There is a Y-series tip that comes with the adapter.
    It seems like it fits. Butit  is 19V instead of the required 20V.
    I haven't had the nerve to try it.

  • I just bought a new 10watt usb power charger and it says not charging?

    I just bought a new 10watt usb power charger and it says not charging?

    Maybe the charger is OK , but the cable may be damaged.

  • 2006 MBP: can I use a new adapter with my old t-cable?

    My 85w adapter crapped out and I have isolated the issue to the adapter itself and not the cable with the magsafe t-shape. I understand that the new adapters dont work with older macbooks so rather than trying to track down an old adapter can I just buy a new one with the L-shape magsafe and swap in my t-shape magsafe cable?

    There have been people report "fit" issues with the L adaptors on older MBPs. Not all, but a lot. Take the MBP with you to an Apple Store or AASP and make them show you that the new adapter not only fits but charges your computer.

Maybe you are looking for