Thinkpad T420 three monitors linux/nvidia optimus

Hello,
I have a thinkpad T420 with a nvidia nvs4200 optimus. It has two video ports, one vga and one displayport. With optimus and windows 7 it should be able to display an two external and the internal display, in sum on three monitors.
In the bios I can switch between integrated, discrete, optimus. With discrete I am able to use two monitors. With optimus enabled, the Intel can't see the displayport.
Now the interesting thing. I installed bumblebee and it works. For curiosity I set it up to use the monitor "DP1", et voila, after running the bumblebee deamon and something with optirun I can see the bumblebee X server on the third monitor connected to the displayport. I can run something on it with "DISPLAY=:8.0 gvim" or even "DISPLAY=:8.0 nvidia-settings". Btw. it uses the same mouse as the first X server.
Now, any ideas how I could setup it for something useful?
EDIT:
Ok, with Xdmx it is possible to span a desktop using all three monitors, but with disabled glx, that means no composite, 3d etc.
Setup to test it, assuming a running bumblebee installation:
pacman -S xterm xorg-server-xdmx
echo "exec /usr/bin/optirun /usr/bin/xterm" > ~/.xinitrc
sudo /etc/rc.d/bumblebee start
startx -- :7
-in xterm run
startx /usr/bin/xfce4-session -- /usr/bin/Xdmx -display :7 -display :8 +xinerama -noglxproxy
Until someone has an idea how to enable glx, this setup is hardly useful.
Gruß, Georg
Last edited by Dschoordsch (2011-08-25 09:27:21)

I managed to get 3 monitors working on my T420 with a Lenovo Mini Dock Series 3 Plus. Have a look at my xorg.conf below. Please note that with my T420, the DVI ports on the dock are (probably) hardwired to the nvidia card. The VGA might possibly be, as you said, hardwired to the intel card, whereas the DisplayPort might be hardwired to the nvidia card. So you'd need to power two screens (VGA + internal display) using the intel card and one screen (DP) using the nvidia.
"ServerLayout"
Identifier "X.org Configured"
Screen 0 "LG0" 0 0
Screen 1 "LG1" RightOf "LG0"
Screen 2 "INT" LeftOf "LG0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "1"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri2"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "LG0"
VendorName "LG"
ModelName "LG Electronics L227W"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "LG1"
VendorName "LG"
ModelName "LG Electronics L227W"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "INT"
VendorName "Unknown"
ModelName "Internal"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "intel0"
Driver "intel"
Option "XvMC" "true"
Option "UseEvents" "true"
Option "AccelMethod" "UXA"
BusID "PCI:0:2:0"
EndSection
Section "Device"
Identifier "nvidia0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 4200M"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "nvidia1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVS 4200M"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "LG0"
Device "nvidia0"
Monitor "LG0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "LG1"
Device "nvidia1"
Monitor "LG1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "INT"
Device "intel"
Monitor "INT"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by fhirschmann (2011-09-20 21:46:31)

Similar Messages

  • Is the ThinkPad T420s available with i7 without getting the NVIDIA graphics?

    I'm looking at ordering a Lenovo T420s soon for myself.  In both the reseller guide and on the Lenovo CTO site I don't see any configurations of the T420s that are offered with the Core i7 processor but without the NVIDIA Optimus graphics.  Is this an available configuration?
    Current: ThinkPad Tablet 2 | 64GB // ThinkPad T440s | i7-4600U | 12GB | 512GB SSD | FHD MT
    Previous: ThinkPad T420s // ThinkPad T410s

    Will we be seeing those machines in April? I would be upgrading mine to recycle mine to a new hire. No approval yet, but depending on the timeline I may not have the option of waiting...
    I like the look of the T430u but we use docking stations here so that one may not be an option for me. Besides I want a full power laptop because I find iPad fills the ultraportable space for me quite well right now.
    Current: ThinkPad Tablet 2 | 64GB // ThinkPad T440s | i7-4600U | 12GB | 512GB SSD | FHD MT
    Previous: ThinkPad T420s // ThinkPad T410s

  • Three monitors -- Is it doable? [nVidia]

    First off, let me say I think / hope I am in the right forum section. I couldn't decide if this was a hardware or software question, but since it has more to do with the drivers and software, I decided to put it in here.  If I am in the wrong section, though, I ask that a Mod please move this to the correct one.  Also, I did a quick search of the forum before posting and couldn't find any similar threads. Apologies if this has been asked before. (Sorry for all this humbling rules talk but as this is my first post, I want to make it clear that I am a civilized user!)
    Anyway -- now for the question!
    On my main PC I run three 19" displays, which are connected to two nVidia GTX 275.  I am currently running Windows 7 and would like to switch over to Arch for the majority of my computing needs.  I have ran Arch prior on just one video card and two monitors.  Back when I made the leap to 2 cards/3 monitors, I encountered a lot of X crashes and funky behavior with my desktop environments.  As it's been quite a while since I was fiddled with it, I was wondering if anyone else has had any luck with this configuration and had any pointers for me to try out.
    As for my expectations...
    I'd like to use Gnome 3, preferably with the Cinnamon shell replacement but Gnome-Shell will also work.
    If Gnome 3 is a no-go, I would then prefer XFCE, hopefully with a functional Compiz setup.
    If that won't work, I would be okay with using KDE. I'm not much of a fan, though.
    Back when I had first played around with this setup, I was using the official nVidia drivers and running Gnome-Shell.  I forget the exact xorg configuration setups I was using, but some times it would "work" with one display being normal, and the other two had a single monitor's content stretched across them.  Other times it would just function like a two-monitor setup and ignore the third one completely.  Both situations persisted when I tried Gnome3's Fallback mode as well.
    It might be worth noting that the last time I saw a 3-monitor Linux setup working up close was my friends using Gnome 2.x and not using Compiz.  I'd even be okay with using this, but I can't find an easy way to get back to Gnome 2.x that doesn't involve messing with long-abandoned / buggy code forks.
    But anyway.... I think thats all I have for now. Thanks for reading, and I am looking forward to any responses!

    geeksunny wrote:
    Well I did a little research and it turns out there's a driver feature I just learned off called 'Base-Mosaic'. This will get me a 3d-accelerated desktop using all 3 of my monitors.
    I wanted to test this a little before I upset my existing Windows 7 setup by re-partitioning, so I installed the latest Ubuntu using Wubi. I got a working xorg.conf rigged up and it worked great in the login screen and a stock 2d XFCE! But then it started to get buggy in Unity -- both 2d and 3d -- so I can't be sure if I should blame the nvidia/Xorg config, or Ubuntu/Unity... so I will be re-partitioning my hard drive and setting up a fresh Arch install to test this further!
    For reference, here is the line I used to set up this mosaic X-layout:
    nvidia-xconfig --base-mosaic --metamodes="GPU-0.DFP-1: 1440x900+0+0, GPU-0.DFP-0: 1440x900+1440+0, GPU-1.DFP-0: 1440x900+2880+0"
    I will update this again when I have more to share!
    egon2003 wrote:If you use GTX 680 you can use nvidias twinview as this card supports 3 monitors. I use it myself under gentoo and it works fine.
    Thanks, good to know! I can't see myself upgrading anytime soon though. Haha.
    Hi geeksunny.
    Did you manage to get Mosaic mode working for your 3 monitors?
    I'm currently trying to do the same across my onboard nforce graphics and my GT630.

  • Thinkpad T420 with Optimus: Card is turning on at random

    Hey yall,
    I'm using bumblebeed on my Thinkpad T420 and upgraded to bbswitch for power management. The discrete card still shows up in lspci when it's 'turned off" but power consumption goes down and bumblebee says its off, so I figure that's the best I'm gonna get.
    Weird thing is, it keeps turning itself on for no good reason. I manually switch the daemon on and off, which I thought was completely controlling all software interface with the card. Apparently ACPI is turning the card on for some reason, and I don't want it to. The only reason I noticed is because I was watching the logs to figure out unrelated ACPI behavior. Pasted below is when I unplugged the laptop and plugged it back in a couple times to see what happened. About a minute later, ACPI wakes up the card. The stuff after that is me running a script that cycles the daemon, which is the most consistent way I have to disable the card manually. I think I pressed a laptop button in there somewhere too.
    Does anyone know why ACPI might be waking up the card at random, and how to get it to stop? I have a feeling it's eating away at my battery without my knowledge by turning itself on when I'm on the road.
    Apr 1 03:54:11 localhost josh: ACPI action undefined: PNP0C0A:00
    Apr 1 03:54:11 localhost laptop-mode: Laptop mode
    Apr 1 03:54:11 localhost laptop-mode: enabled,
    Apr 1 03:54:11 localhost laptop-mode: not active [unchanged]
    Apr 1 03:54:11 localhost josh: ACPI action undefined: PNP0C0A:00
    Apr 1 03:54:11 localhost laptop-mode: Laptop mode
    Apr 1 03:54:11 localhost laptop-mode: enabled,
    Apr 1 03:54:11 localhost laptop-mode: not active [unchanged]
    Apr 1 03:55:01 localhost kernel: [43515.975286] nvidia 0000:01:00.0: power state changed by ACPI to D0
    Apr 1 03:55:01 localhost kernel: [43515.975304] nvidia 0000:01:00.0: power state changed by ACPI to D0
    Apr 1 03:55:01 localhost kernel: [43515.975308] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
    Apr 1 03:55:01 localhost kernel: [43515.975313] thinkpad_acpi: EC reports that Thermal Table has changed
    Apr 1 03:55:01 localhost kernel: [43515.975316] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Apr 1 03:55:01 localhost kernel: [43515.975329] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=none
    Apr 1 03:55:01 localhost kernel: [43515.975477] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.33 Sat Mar 17 14:55:45 PDT 2012
    Apr 1 03:55:01 localhost josh: ACPI group/action undefined: ibm/hotkey / LEN0068:00
    Apr 1 03:55:38 localhost bumblebeed[13836]: /usr/sbin/bumblebeed 3.0 started
    Apr 1 03:55:38 localhost kernel: [43553.070886] bbswitch: disabling discrete graphics
    Apr 1 03:55:38 localhost kernel: [43553.083249] pci 0000:01:00.0: Refused to change power state, currently in D0
    Apr 1 03:55:38 localhost kernel: [43553.083871] thinkpad_acpi: EC reports that Thermal Table has changed
    Apr 1 03:55:38 localhost josh: ACPI group/action undefined: ibm/hotkey / LEN0068:00
    Apr 1 03:55:38 localhost bumblebeed[13839]: Received Terminated signal.
    Apr 1 03:55:38 localhost kernel: [43553.091937] pci 0000:01:00.0: power state changed by ACPI to D3

    Ok, so, apparently it is turning itself on when I'm using Flash. I am scratching my head. My browser should have no idea that card exists, because I use optirun to select things to run in that layer. And the bumblebee daemon is off. This seems like a security issue! I'm only able to control the card with root privileges; how on earth is Flash getting around that?
    Any ideas are welcome, this is a little over my head. I don't understand ACPI in any intimate way.

  • Thinkpad T420, Integrated Graphics, Dual Monitors

    Warning: this isn't really a problem thread. I've looked and looked but can't find a definitive answer for my question.
    I'm seriously considering a Thinkpad T420 for a new work laptop. I've heard great things from many people, but the most important question has yet to be answered: if I get one with integrated graphics (Intel HD 3000), will dual monitors work with VGA and DisplayPort with a DVI adapter? It's crucial that I'm able to use two external monitors simultaneously and I'm sick of using TwinView because I can't rotate a monitor. Can anyone confirm that this works?

    according to tabook.pdf
    Intel HD Graphics 3000 in processor,
    external analog monitor support via VGA DB-15 connector and
    digital monitor support via DisplayPort (supports single-link DVI-D via cable 45J7915);
    supports dual independent display;
    Maximum external resolution: 2560x1600 (DisplayPort)@60Hz;
    2048x1536 (VGA)@75Hz; 1920x1200@60Hz (single-link DVI-D via cable 45J7915)
    So, it looks like the hardware is certainly capable of it.

  • Satellite P870/023 - how to install NVIDIA optimus GT 630m in Linux?

    Hi
    Is there anyone who have managed to install nvidia optimus GT 630m in ubuntu or any other OS linux and worked?? coz I did all the methods which are available on net, but no luck, found out that Bumblebee can't get to enable Nvidia!! is it right??
    How to switch graphic card? does it have an option to switch card in BIOS??
    Need a help to install nvidia on ubuntu!! I'm using linux ( ubuntu 12.10and kernel 3.6.0)
    I appreciate your help and thanks

    Hi RedStar
    To be quite forward with You: there is very few details that can be used to help You.
    Suggestions from me: You say there are errors. Great. But what are the error messages.
    When asking for help, please try to put yourself in the position of the people you are asking help from.
    THey need details and relevant information to be able to help.
    They probably know very little of your specific situation.
    Stating things like "it doesn't work" is simply not enough.
    "there are errors" - well ok. That lets people know that something is not running on rails....but what?
    And vague details are also not enough. Provide the exact messages! Copy & Paste if You need to.
    Anyway, I suggest that You issue bug reports on the Bumblebee site for a better support since they probably are the best to help You.
    https://github.com/Bumblebee-Project/Bumblebee/wiki/Reporting-Issues
    BTW - thanks for enlightening me on the Bumblebee project! I was not aware of this until You told me :)
    Good luck and please report your progress back into this thread. I am sure many people are interested in your experiences. I am!
    BR Tom

  • Thinkpad t420 extended displays

    I am currently trying to extend my desktop display over three monitors. I have connected a VGA cable and a display cable into the dock, but the display settings will only allow me to use two displays. From the research I've done, it looks as though a t420 can use three displays. Help please!

    If you only got the intel GPU then this is not possible. If you got the nvidia Optimus then yes.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Problem with Nvidia Optimus

    Hello,
    I have a laptop with the Nvidia Optimus technology. I followed the wiki, and now I get a blank screen.
    This is the guide that I followed: https://wiki.archlinux.org/index.php/NV … ing_nvidia
    This is my /var/log/Xorg.0.log file:
    [ 341.985]
    X.Org X Server 1.16.3
    Release Date: 2014-12-20
    [ 341.987] X Protocol Version 11, Revision 0
    [ 341.988] Build Operating System: Linux 3.18.1-1-ARCH x86_64
    [ 341.988] Current Operating System: Linux egidio-arch 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
    [ 341.988] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=3f7faf8f-4039-466e-b99d-34fa1c61b40f rw quiet
    [ 341.990] Build Date: 29 December 2014 01:09:58PM
    [ 341.990]
    [ 341.991] Current version of pixman: 0.32.6
    [ 341.992] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 341.992] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 341.995] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 3 02:59:24 2015
    [ 341.995] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 341.996] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 341.996] (==) ServerLayout "layout"
    [ 341.996] (**) |-->Screen "nvidia" (0)
    [ 341.996] (**) | |-->Monitor "<default monitor>"
    [ 341.996] (**) | |-->Device "nvidia"
    [ 341.996] (==) No monitor specified for screen "nvidia".
    Using a default monitor configuration.
    [ 341.996] (**) |-->Inactive Device "intel"
    [ 341.996] (==) Automatically adding devices
    [ 341.996] (==) Automatically enabling devices
    [ 341.996] (==) Automatically adding GPU devices
    [ 342.039] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 342.039] Entry deleted from font path.
    [ 342.068] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 342.068] Entry deleted from font path.
    [ 342.068] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 342.068] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 342.068] Entry deleted from font path.
    [ 342.068] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 342.068] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 342.068] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 342.068] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 342.079] (II) Loader magic: 0x818d80
    [ 342.079] (II) Module ABI versions:
    [ 342.079] X.Org ANSI C Emulation: 0.4
    [ 342.079] X.Org Video Driver: 18.0
    [ 342.079] X.Org XInput driver : 21.0
    [ 342.079] X.Org Server Extension : 8.0
    [ 342.081] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 342.081] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 342.081] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 8 paused 0
    [ 342.081] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 342.082] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 9 paused 0
    [ 342.083] (--) PCI:*(0:0:2:0) 8086:0416:1043:129d rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
    [ 342.083] (--) PCI: (0:1:0:0) 10de:0fe4:1043:129d rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 342.083] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 342.083] (II) LoadModule: "glx"
    [ 342.123] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 342.678] (II) Module glx: vendor="NVIDIA Corporation"
    [ 342.678] compiled for 4.0.2, module version = 1.0.0
    [ 342.678] Module class: X.Org Server Extension
    [ 342.685] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
    [ 342.689] (II) LoadModule: "nvidia"
    [ 342.745] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 342.835] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 342.835] compiled for 4.0.2, module version = 1.0.0
    [ 342.835] Module class: X.Org Video Driver
    [ 342.846] (II) LoadModule: "modesetting"
    [ 342.846] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 342.847] (II) Module modesetting: vendor="X.Org Foundation"
    [ 342.847] compiled for 1.16.0, module version = 0.9.0
    [ 342.847] Module class: X.Org Video Driver
    [ 342.847] ABI class: X.Org Video Driver, version 18.0
    [ 342.847] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
    [ 342.847] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 342.847] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 342.847] (++) using VT number 2
    [ 342.847] (--) controlling tty is VT number 2, auto-enabling KeepTty
    [ 342.855] (II) Loading sub module "fb"
    [ 342.855] (II) LoadModule: "fb"
    [ 342.855] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 342.872] (II) Module fb: vendor="X.Org Foundation"
    [ 342.872] compiled for 1.16.3, module version = 1.0.0
    [ 342.872] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 342.872] (II) Loading sub module "wfb"
    [ 342.872] (II) LoadModule: "wfb"
    [ 342.872] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 342.891] (II) Module wfb: vendor="X.Org Foundation"
    [ 342.891] compiled for 1.16.3, module version = 1.0.0
    [ 342.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 342.891] (II) Loading sub module "ramdac"
    [ 342.891] (II) LoadModule: "ramdac"
    [ 342.891] (II) Module "ramdac" already built-in
    [ 342.905] (II) modesetting(1): using drv /dev/dri/card0
    [ 342.905] (II) modesetting(G0): using drv /dev/dri/card0
    [ 342.905] (EE) Screen 1 deleted because of no matching config section.
    [ 342.905] (II) UnloadModule: "modesetting"
    [ 342.905] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "nvidia" for depth/fbbpp 24/32
    [ 342.905] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 342.905] (==) NVIDIA(0): RGB weight 888
    [ 342.905] (==) NVIDIA(0): Default visual is TrueColor
    [ 342.905] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 342.905] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
    [ 342.907] (**) NVIDIA(0): Enabling 2D acceleration
    [ 347.122] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
    [ 347.122] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
    [ 347.122] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
    [ 347.122] (EE) NVIDIA(GPU-0): README for additional information.
    [ 347.122] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
    [ 347.122] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 347.122] (II) UnloadModule: "nvidia"
    [ 347.122] (II) UnloadSubModule: "wfb"
    [ 347.122] (II) UnloadSubModule: "fb"
    [ 347.122] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
    [ 347.122] (==) modesetting(G0): RGB weight 888
    [ 347.122] (==) modesetting(G0): Default visual is TrueColor
    [ 347.122] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
    [ 347.124] (II) modesetting(G0): Output eDP-1-0 has no monitor section
    [ 347.149] (II) modesetting(G0): Output VGA-1-0 has no monitor section
    [ 347.150] (II) modesetting(G0): Output DisplayPort-1-0 has no monitor section
    [ 347.150] (II) modesetting(G0): Output HDMI-1-0 has no monitor section
    [ 347.150] (II) modesetting(G0): Output HDMI-1-1 has no monitor section
    [ 347.152] (II) modesetting(G0): EDID for output eDP-1-0
    [ 347.152] (II) modesetting(G0): Manufacturer: CMO Model: 1720 Serial#: 0
    [ 347.152] (II) modesetting(G0): Year: 2011 Week: 2
    [ 347.152] (II) modesetting(G0): EDID Version: 1.4
    [ 347.152] (II) modesetting(G0): Digital Display Input
    [ 347.152] (II) modesetting(G0): 6 bits per channel
    [ 347.152] (II) modesetting(G0): Digital interface is undefined
    [ 347.152] (II) modesetting(G0): Max Image Size [cm]: horiz.: 38 vert.: 21
    [ 347.152] (II) modesetting(G0): Gamma: 2.20
    [ 347.152] (II) modesetting(G0): No DPMS capabilities specified
    [ 347.152] (II) modesetting(G0): Supported color encodings: RGB 4:4:4
    [ 347.152] (II) modesetting(G0): First detailed timing is preferred mode
    [ 347.152] (II) modesetting(G0): Preferred mode is native pixel format and refresh rate
    [ 347.152] (II) modesetting(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.610
    [ 347.152] (II) modesetting(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 347.152] (II) modesetting(G0): Manufacturer's mask: 0
    [ 347.152] (II) modesetting(G0): Supported detailed timing:
    [ 347.152] (II) modesetting(G0): clock: 140.5 MHz Image Size: 382 x 215 mm
    [ 347.152] (II) modesetting(G0): h_active: 1920 h_sync: 1972 h_sync_end 2007 h_blank_end 2094 h_border: 0
    [ 347.152] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1089 v_blanking: 1118 v_border: 0
    [ 347.152] (II) modesetting(G0): Supported detailed timing:
    [ 347.152] (II) modesetting(G0): clock: 92.5 MHz Image Size: 382 x 215 mm
    [ 347.152] (II) modesetting(G0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 347.152] (II) modesetting(G0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0
    [ 347.152] (II) modesetting(G0): HC9GK173HGE
    [ 347.152] (II) modesetting(G0): Unknown vendor-specific block 0
    [ 347.152] (II) modesetting(G0): EDID (in hex):
    [ 347.152] (II) modesetting(G0): 00ffffffffffff000daf201700000000
    [ 347.152] (II) modesetting(G0): 021501049026157802ed95a3544c9c26
    [ 347.152] (II) modesetting(G0): 0f505400000001010101010101010101
    [ 347.152] (II) modesetting(G0): 010101010101e13680ae703826403423
    [ 347.152] (II) modesetting(G0): 36007ed71000001a1d2480a070381f40
    [ 347.152] (II) modesetting(G0): 302035007ed71000001a000000fe0048
    [ 347.152] (II) modesetting(G0): 4339474b803137334847450a00000000
    [ 347.152] (II) modesetting(G0): 000041319e0000000002010a202000f3
    [ 347.152] (II) modesetting(G0): Printing probed modes for output eDP-1-0
    [ 347.152] (II) modesetting(G0): Modeline "1920x1080"x60.0 140.49 1920 1972 2007 2094 1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
    [ 347.152] (II) modesetting(G0): Modeline "1920x1080"x40.0 92.45 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
    [ 347.152] (II) modesetting(G0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 347.152] (II) modesetting(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 347.176] (II) modesetting(G0): EDID for output VGA-1-0
    [ 347.176] (II) modesetting(G0): EDID for output DisplayPort-1-0
    [ 347.176] (II) modesetting(G0): EDID for output HDMI-1-0
    [ 347.177] (II) modesetting(G0): EDID for output HDMI-1-1
    [ 347.177] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 347.177] (==) modesetting(G0): DPI set to (96, 96)
    [ 347.177] (II) Loading sub module "fb"
    [ 347.177] (II) LoadModule: "fb"
    [ 347.177] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 347.177] (II) Module fb: vendor="X.Org Foundation"
    [ 347.177] compiled for 1.16.3, module version = 1.0.0
    [ 347.177] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 347.177] (II) Loading sub module "shadow"
    [ 347.177] (II) LoadModule: "shadow"
    [ 347.177] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 347.183] (II) Module shadow: vendor="X.Org Foundation"
    [ 347.183] compiled for 1.16.3, module version = 1.1.0
    [ 347.183] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 347.183] (EE) Screen(s) found, but none have a usable configuration.
    [ 347.183] (EE)
    Fatal server error:
    [ 347.183] (EE) no screens found(EE)
    [ 347.183] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 347.183] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 347.183] (EE)
    [ 347.189] (EE) Server terminated with error (1). Closing log file.
    I'm using Gnome.
    Can you please help me?
    Last edited by Aegidius (2015-01-03 10:17:22)

    Here it is, but you will get to my same conclusion.
    [egidio@egidio-arch ~]$ lspci -v
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0
    Capabilities: <access denied>
    Kernel modules: ie31200_edac
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 26
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: f6000000-f70fffff
    Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) (prog-if 00 [VGA controller])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 36
    Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    I/O ports at f000 [size=64]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: <access denied>
    Kernel driver in use: i915
    Kernel modules: i915
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    Subsystem: Intel Corporation Device 2010
    Flags: bus master, fast devsel, latency 0, IRQ 38
    Memory at f7b14000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04) (prog-if 30 [XHCI])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0, IRQ 32
    Memory at f7b00000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_hcd
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 34
    Memory at f7b1e000 (64-bit, non-prefetchable) [size=16]
    Capabilities: <access denied>
    Kernel driver in use: mei_me
    Kernel modules: mei_me
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0, IRQ 16
    Memory at f7b1c000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 37
    Memory at f7b10000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 27
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 28
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Memory behind bridge: f7a00000-f7afffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 29
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: f7900000-f79fffff
    Prefetchable memory behind bridge: 00000000f2100000-00000000f21fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0, IRQ 30
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    Memory behind bridge: f7800000-f78fffff
    Capabilities: <access denied>
    Kernel driver in use: pcieport
    Kernel modules: shpchp
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0, IRQ 23
    Memory at f7b1b000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: <access denied>
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, medium devsel, latency 0
    Capabilities: <access denied>
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 33
    I/O ports at f0b0 [size=8]
    I/O ports at f0a0 [size=4]
    I/O ports at f090 [size=8]
    I/O ports at f080 [size=4]
    I/O ports at f060 [size=32]
    Memory at f7b1a000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: medium devsel, IRQ 18
    Memory at f7b19000 (64-bit, non-prefetchable) [size=256]
    I/O ports at f040 [size=32]
    Kernel modules: i2c_i801
    01:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)
    Subsystem: ASUSTeK Computer Inc. Device 129d
    Flags: bus master, fast devsel, latency 0, IRQ 39
    Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
    Memory at e0000000 (64-bit, prefetchable) [size=256M]
    Memory at f0000000 (64-bit, prefetchable) [size=32M]
    I/O ports at e000 [size=128]
    Expansion ROM at f7000000 [disabled] [size=512K]
    Capabilities: <access denied>
    Kernel driver in use: nouveau
    Kernel modules: nouveau
    03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    Subsystem: AzureWave Device 2126
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at f7a00000 (64-bit, non-prefetchable) [size=512K]
    Expansion ROM at f7a80000 [disabled] [size=64K]
    Capabilities: <access denied>
    Kernel driver in use: ath9k
    Kernel modules: ath9k
    04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
    Subsystem: ASUSTeK Computer Inc. Device 200f
    Flags: bus master, fast devsel, latency 0, IRQ 35
    I/O ports at d000 [size=256]
    Memory at f7900000 (64-bit, non-prefetchable) [size=4K]
    Memory at f2100000 (64-bit, prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: r8169
    Kernel modules: r8169
    05:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader
    Flags: bus master, fast devsel, latency 0, IRQ 31
    Memory at f7800000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: rtsx_pci
    Kernel modules: rtsx_pci
    Last edited by Aegidius (2015-01-03 22:04:23)

  • NVIDIA Optimus on MSI GE70 2OE: No screens, then server fails to start

    Hello,
    I have recently acquired an MSI GE70 2OE-071 laptop with the following configuration, intending to run Arch Linux (dual boot with Windows 7) on it:
    CPU: Intel Core i7-4700 MQ
    GPU: Nvidia GeForce GTX 765M (2 GB DDR5 memory)
    LCD: 17.3" FHD 1920x1080
    Memory: 12 GB DDR3
    HDD: 1 TB 7200 RPM
    I originally installed Arch Linux the same way as described in the beginner's guide. I could get the basic twm setup to work, but the moment I installed the proprietary drivers (using pacman -S nvidia, followed by nvidia-xconfig, followed by a reboot), X Windows crashed, i.e. I started getting the No screens found error. So after some days of digging, I found the NVIDIA Optimus wiki page. Following the advice here, I could get rid of this error, but I still cannot get into the GUI, because the server terminates. There is no hardware problem that I can think of because Manjaro Linux works fine, and being a perpetual Arch novice eager to learn, I just wanted to get this thing to work from the ground up.
    So I'd really appreciate some help.
    Here are the relevant files and command outputs.
    uname -a. url = http://bpaste.net/show/166840/
    Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64 GNU/Linux
    .xinitrc. url = http://bpaste.net/show/166837/
    xrandr --setprovideroutputsource modesetting NVIDIA-0
    xrandr --auto
    /etc/X11/xorg.conf. url = http://bpaste.net/show/166838/
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:53 PDT 2013
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BusID "PCI:1:0:0" # manually added
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    /var/log/Xorg.0.log. url = http://bpaste.net/show/166839/
    [ 1684.463]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1684.465] X Protocol Version 11, Revision 0
    [ 1684.465] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1684.466] Current Operating System: Linux gluon 3.12.6-1-ARCH #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013 x86_64
    [ 1684.466] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 1684.467] Build Date: 06 January 2014 10:25:32PM
    [ 1684.467]
    [ 1684.468] Current version of pixman: 0.32.4
    [ 1684.469] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1684.469] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1684.472] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 11 07:17:09 2014
    [ 1684.472] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1684.473] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1684.473] (==) ServerLayout "Layout0"
    [ 1684.473] (**) |-->Screen "Screen0" (0)
    [ 1684.473] (**) | |-->Monitor "Monitor0"
    [ 1684.473] (**) | |-->Device "Device0"
    [ 1684.473] (**) |-->Input Device "Keyboard0"
    [ 1684.473] (**) |-->Input Device "Mouse0"
    [ 1684.473] (==) Automatically adding devices
    [ 1684.473] (==) Automatically enabling devices
    [ 1684.473] (==) Automatically adding GPU devices
    [ 1684.473] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1684.473] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1684.473] Entry deleted from font path.
    [ 1684.473] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1684.473] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1684.473] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1684.473] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1684.473] (WW) Disabling Keyboard0
    [ 1684.473] (WW) Disabling Mouse0
    [ 1684.473] (II) Loader magic: 0x7fac20
    [ 1684.473] (II) Module ABI versions:
    [ 1684.473] X.Org ANSI C Emulation: 0.4
    [ 1684.473] X.Org Video Driver: 14.1
    [ 1684.473] X.Org XInput driver : 19.1
    [ 1684.473] X.Org Server Extension : 7.0
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1684.473] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1684.474] (--) PCI:*(0:0:2:0) 8086:0416:1462:10e1 rev 6, Mem @ 0xf7400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
    [ 1684.474] (--) PCI: (0:1:0:0) 10de:11e2:1462:10e1 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 1684.475] Initializing built-in extension Generic Event Extension
    [ 1684.476] Initializing built-in extension SHAPE
    [ 1684.476] Initializing built-in extension MIT-SHM
    [ 1684.477] Initializing built-in extension XInputExtension
    [ 1684.478] Initializing built-in extension XTEST
    [ 1684.478] Initializing built-in extension BIG-REQUESTS
    [ 1684.479] Initializing built-in extension SYNC
    [ 1684.479] Initializing built-in extension XKEYBOARD
    [ 1684.480] Initializing built-in extension XC-MISC
    [ 1684.481] Initializing built-in extension SECURITY
    [ 1684.481] Initializing built-in extension XINERAMA
    [ 1684.482] Initializing built-in extension XFIXES
    [ 1684.482] Initializing built-in extension RENDER
    [ 1684.483] Initializing built-in extension RANDR
    [ 1684.484] Initializing built-in extension COMPOSITE
    [ 1684.484] Initializing built-in extension DAMAGE
    [ 1684.485] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1684.485] Initializing built-in extension DOUBLE-BUFFER
    [ 1684.486] Initializing built-in extension RECORD
    [ 1684.487] Initializing built-in extension DPMS
    [ 1684.487] Initializing built-in extension X-Resource
    [ 1684.488] Initializing built-in extension XVideo
    [ 1684.488] Initializing built-in extension XVideo-MotionCompensation
    [ 1684.489] Initializing built-in extension XFree86-VidModeExtension
    [ 1684.489] Initializing built-in extension XFree86-DGA
    [ 1684.490] Initializing built-in extension XFree86-DRI
    [ 1684.490] Initializing built-in extension DRI2
    [ 1684.490] (II) LoadModule: "glx"
    [ 1684.490] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1684.490] (II) Module glx: vendor="X.Org Foundation"
    [ 1684.490] compiled for 1.14.5, module version = 1.0.0
    [ 1684.490] ABI class: X.Org Server Extension, version 7.0
    [ 1684.490] (==) AIGLX enabled
    [ 1684.491] Loading extension GLX
    [ 1684.491] (II) LoadModule: "nvidia"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 1684.491] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 1684.491] compiled for 4.0.2, module version = 1.0.0
    [ 1684.491] Module class: X.Org Video Driver
    [ 1684.491] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013
    [ 1684.491] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 1684.491] (++) using VT number 1
    [ 1684.491] (II) Loading sub module "fb"
    [ 1684.491] (II) LoadModule: "fb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1684.491] (II) Module fb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 1684.491] (II) Loading sub module "wfb"
    [ 1684.491] (II) LoadModule: "wfb"
    [ 1684.491] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 1684.491] (II) Module wfb: vendor="X.Org Foundation"
    [ 1684.491] compiled for 1.14.5, module version = 1.0.0
    [ 1684.491] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1684.491] (II) Loading sub module "ramdac"
    [ 1684.491] (II) LoadModule: "ramdac"
    [ 1684.491] (II) Module "ramdac" already built-in
    [ 1684.491] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 1684.491] (==) NVIDIA(0): RGB weight 888
    [ 1684.492] (==) NVIDIA(0): Default visual is TrueColor
    [ 1684.492] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 1684.492] (**) NVIDIA(0): Enabling 2D acceleration
    [ 1684.492] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
    [ 1684.492] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
    [ 1684.492] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
    [ 1684.492] (EE) NVIDIA(0): you continue to encounter problems, Please try
    [ 1684.492] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
    [ 1684.654] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 1684.655] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 765M (GK106) at PCI:1:0:0 (GPU-0)
    [ 1684.655] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 1684.655] (--) NVIDIA(0): VideoBIOS: 80.06.5d.00.09
    [ 1684.655] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 1684.655] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 765M at PCI:1:0:0
    [ 1684.655] (--) NVIDIA(0): none
    [ 1684.655] (II) NVIDIA(0): Validated MetaModes:
    [ 1684.655] (II) NVIDIA(0): "NULL"
    [ 1684.655] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 1684.655] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 1684.655] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 1684.655] (--) Depth 24 pixmap format is 32 bpp
    [ 1684.655] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 1684.655] (II) NVIDIA: access.
    [ 1684.661] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1684.661] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1684.661] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1684.661] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1684.661] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1684.661] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1684.661] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1684.661] (II) NVIDIA(0): Config Options in the README.
    [ 1684.661] (II) NVIDIA(0): Setting mode "NULL"
    [ 1684.661] (EE) NVIDIA(0): Failed to initiate mode change.
    [ 1684.661] (EE) NVIDIA(0): Failed to complete mode change
    [ 1684.668] (II) NVIDIA(0): Built-in logo is bigger than the screen.
    [ 1684.668] Loading extension NV-GLX
    [ 1684.670] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 1684.670] (==) NVIDIA(0): Backing store disabled
    [ 1684.670] (==) NVIDIA(0): Silken mouse enabled
    [ 1684.670] (**) NVIDIA(0): DPMS enabled
    [ 1684.670] Loading extension NV-CONTROL
    [ 1684.670] (II) Loading sub module "dri2"
    [ 1684.670] (II) LoadModule: "dri2"
    [ 1684.670] (II) Module "dri2" already built-in
    [ 1684.670] (II) NVIDIA(0): [DRI2] Setup complete
    [ 1684.670] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 1684.670] (--) RandR disabled
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 1684.673] (II) AIGLX: Screen 0 is not DRI capable
    [ 1684.680] (II) AIGLX: Loaded and initialized swrast
    [ 1684.680] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 1684.697] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 1684.697] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.697] (II) LoadModule: "evdev"
    [ 1684.697] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1684.697] (II) Module evdev: vendor="X.Org Foundation"
    [ 1684.697] compiled for 1.14.3, module version = 2.8.2
    [ 1684.697] Module class: X.Org XInput Driver
    [ 1684.697] ABI class: X.Org XInput driver, version 19.1
    [ 1684.697] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.697] (**) Power Button: always reports core events
    [ 1684.697] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 1684.697] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.697] (--) evdev: Power Button: Found keys
    [ 1684.697] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.697] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
    [ 1684.697] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1684.697] (**) Option "xkb_rules" "evdev"
    [ 1684.697] (**) Option "xkb_model" "pc104"
    [ 1684.697] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13/event12"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.709] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 1684.709] (II) No input driver specified, ignoring this device.
    [ 1684.709] (II) This device may have been added with another device file.
    [ 1684.709] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
    [ 1684.709] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 1684.709] (II) Using input driver 'evdev' for 'Video Bus'
    [ 1684.709] (**) Video Bus: always reports core events
    [ 1684.709] (**) evdev: Video Bus: Device: "/dev/input/event11"
    [ 1684.709] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 1684.709] (--) evdev: Video Bus: Found keys
    [ 1684.709] (II) evdev: Video Bus: Configuring as keyboard
    [ 1684.709] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:48/LNXVIDEO:00/input/input12/event11"
    [ 1684.709] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 1684.709] (**) Option "xkb_rules" "evdev"
    [ 1684.709] (**) Option "xkb_model" "pc104"
    [ 1684.709] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1684.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'Power Button'
    [ 1684.710] (**) Power Button: always reports core events
    [ 1684.710] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1684.710] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1684.710] (--) evdev: Power Button: Found keys
    [ 1684.710] (II) evdev: Power Button: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
    [ 1684.710] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1684.710] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event14)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event13)
    [ 1684.710] (II) No input driver specified, ignoring this device.
    [ 1684.710] (II) This device may have been added with another device file.
    [ 1684.710] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event9)
    [ 1684.710] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
    [ 1684.710] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
    [ 1684.710] (**) BisonCam, NB Pro: always reports core events
    [ 1684.710] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event9"
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x14c
    [ 1684.710] (--) evdev: BisonCam, NB Pro: Found keys
    [ 1684.710] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
    [ 1684.710] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input11/event9"
    [ 1684.710] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 10)
    [ 1684.710] (**) Option "xkb_rules" "evdev"
    [ 1684.710] (**) Option "xkb_model" "pc104"
    [ 1684.710] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
    [ 1684.711] (II) No input driver specified, ignoring this device.
    [ 1684.711] (II) This device may have been added with another device file.
    [ 1684.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1684.711] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1684.711] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1684.711] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1684.711] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1684.711] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1684.711] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1684.711] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1684.711] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
    [ 1684.711] (**) Option "xkb_rules" "evdev"
    [ 1684.711] (**) Option "xkb_model" "pc104"
    [ 1684.711] (**) Option "xkb_layout" "us"
    [ 1684.711] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
    [ 1684.711] (II) LoadModule: "synaptics"
    [ 1684.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 1684.711] (II) Module synaptics: vendor="X.Org Foundation"
    [ 1684.711] compiled for 1.14.4, module version = 1.7.2
    [ 1684.711] Module class: X.Org XInput Driver
    [ 1684.711] ABI class: X.Org XInput driver, version 19.1
    [ 1684.711] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
    [ 1684.711] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.711] (**) Option "Device" "/dev/input/event10"
    [ 1684.783] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
    [ 1684.783] (**) Option "TapButton1" "1"
    [ 1684.783] (**) Option "TapButton2" "2"
    [ 1684.783] (**) Option "TapButton3" "3"
    [ 1684.783] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
    [ 1684.783] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.783] (**) ETPS/2 Elantech Touchpad: always reports core events
    [ 1684.809] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event10"
    [ 1684.809] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
    [ 1684.810] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
    [ 1684.810] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
    [ 1684.810] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
    [ 1684.810] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 1684.810] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 1684.810] (II) No input driver specified, ignoring this device.
    [ 1684.810] (II) This device may have been added with another device file.
    [ 1684.810] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event5)
    [ 1684.810] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 1684.810] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
    [ 1684.810] (**) MSI WMI hotkeys: always reports core events
    [ 1684.810] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event5"
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
    [ 1684.810] (--) evdev: MSI WMI hotkeys: Found keys
    [ 1684.810] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
    [ 1684.810] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event5"
    [ 1684.810] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 13)
    [ 1684.810] (**) Option "xkb_rules" "evdev"
    [ 1684.810] (**) Option "xkb_model" "pc104"
    [ 1684.810] (**) Option "xkb_layout" "us"
    [ 1685.097] (II) evdev: MSI WMI hotkeys: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) UnloadModule: "synaptics"
    [ 1685.097] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: BisonCam, NB Pro: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Video Bus: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.097] (II) evdev: Power Button: Close
    [ 1685.097] (II) UnloadModule: "evdev"
    [ 1685.116] (II) NVIDIA(GPU-0): Deleting GPU-0
    [b][ 1685.120] (EE) Server terminated successfully (0). Closing log file.[/b]
    lspci. url = http://bpaste.net/show/166842/
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
    00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
    00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
    00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
    00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
    00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
    00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
    00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
    00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
    00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
    00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
    00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
    01:00.0 3D controller: NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
    04:00.0 Ethernet controller: Qualcomm Atheros Killer E2200 Gigabit Ethernet Controller (rev 13)
    05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter
    dmesg. url: http://bpaste.net/show/166841/
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:39:00 CET 2013
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b171fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b172000-0x000000009b178fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000009b179000-0x000000009b8e8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000009b8e9000-0x000000009bb55fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000009bb56000-0x00000000ab48ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab490000-0x00000000ab697fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ab698000-0x00000000ab78bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ab78c000-0x00000000abb73fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000abb74000-0x00000000abffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000034fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
    [ 0.000000] 1 base 0200000000 mask 7F00000000 write-back
    [ 0.000000] 2 base 0300000000 mask 7F80000000 write-back
    [ 0.000000] 3 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 4 base 00B0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00AE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00AD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 0360000000 mask 7FE0000000 uncachable
    [ 0.000000] 8 base 0350000000 mask 7FF0000000 uncachable
    [ 0.000000] 9 base 034FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xad000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34fc00000-0x34fdfffff]
    [ 0.000000] [mem 0x34fc00000-0x34fdfffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x34c000000-0x34fbfffff]
    [ 0.000000] [mem 0x34c000000-0x34fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x300000000-0x34bffffff]
    [ 0.000000] [mem 0x300000000-0x33fffffff] page 1G
    [ 0.000000] [mem 0x340000000-0x34bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x9b171fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0x9affffff] page 2M
    [ 0.000000] [mem 0x9b000000-0x9b171fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] [mem 0x9b179000-0x9b1fffff] page 4k
    [ 0.000000] [mem 0x9b200000-0x9b7fffff] page 2M
    [ 0.000000] [mem 0x9b800000-0x9b8e8fff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] [mem 0x9bb56000-0x9bbfffff] page 4k
    [ 0.000000] [mem 0x9bc00000-0xab3fffff] page 2M
    [ 0.000000] [mem 0xab400000-0xab48ffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xab698000-0xab78bfff]
    [ 0.000000] [mem 0xab698000-0xab78bfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xabfff000-0xabffffff]
    [ 0.000000] [mem 0xabfff000-0xabffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x2ffffffff]
    [ 0.000000] [mem 0x100000000-0x2ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x379fc000-0x37cf5fff]
    [ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 00000000ab814098 000AC (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000ab8206b0 0010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 00000000ab8141d8 0C4D4 (v02 MSI_NB MEGABOOK 00000022 INTL 20091112)
    [ 0.000000] ACPI: FACS 00000000abb72080 00040
    [ 0.000000] ACPI: APIC 00000000ab8207c0 00092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 00000000ab820858 00044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 00000000ab8208a0 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: SSDT 00000000ab820948 00200 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000ab820b48 0019D (v01 Intel zpodd 00001000 INTL 20091112)
    [ 0.000000] ACPI: SLIC 00000000ab820ce8 00176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 00000000ab820e60 00575 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000ab8213d8 00AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: MCFG 00000000ab821eb0 0003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000ab821ef0 00038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 00000000ab821f28 00315 (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab822240 0355D (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 00000000ab8257a0 011FD (v01 SgRef SgPeg 00001000 INTL 20091112)
    [ 0.000000] ACPI: MSFF 00000000ab8269a0 00029 (v01 MSI_NB MEGABOOK 00000010 AMI 00010013)
    [ 0.000000] ACPI: DMAR 00000000ab8269d0 00090 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 00000000ab826a60 01464 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000034fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x34fdfffff]
    [ 0.000000] NODE_DATA [mem 0x34fdf6000-0x34fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea000d3fffff] PMD -> [ffff880343400000-ffff88034f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x34fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x9b171fff]
    [ 0.000000] node 0: [mem 0x9b179000-0x9b8e8fff]
    [ 0.000000] node 0: [mem 0x9bb56000-0xab48ffff]
    [ 0.000000] node 0: [mem 0xab698000-0xab78bfff]
    [ 0.000000] node 0: [mem 0xabfff000-0xabffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x34fdfffff]
    [ 0.000000] On node 0 totalpages: 3125421
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 10893 pages used for memmap
    [ 0.000000] DMA32 zone: 697105 pages, LIFO batch:31
    [ 0.000000] Normal zone: 37880 pages used for memmap
    [ 0.000000] Normal zone: 2424320 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b172000-0x9b178fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x9b8e9000-0x9bb55fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab490000-0xab697fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xab78c000-0xabb73fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xabb74000-0xabffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xac000000-0xacffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xaf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88034fa00000 s86464 r8192 d24128 u262144
    [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3076563
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d2a5754c-c679-48b4-9b12-02ae94b83604 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    BIOS vendor: American Megatrends Inc.; Ver: E1757IMS.10E; Product Version: REV:1.0
    [ 0.000000] Modules linked in:
    [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.12.6-1-ARCH #1
    [ 0.000000] Hardware name: Micro-Star International Co., Ltd. GE70 2OC\2OE/MS-1757, BIOS E1757IMS.10E 07/15/2013
    [ 0.000000] 000000000000000b ffffffff81801de8 ffffffff814ee4fb ffffffff81801e30
    [ 0.000000] ffffffff81801e20 ffffffff81062bcd ffffffff81b3101c ffffffff81b3106c
    [ 0.000000] 0000000000000000 ffff88034fdaad00 ffffffff819f4000 ffffffff81801e80
    [ 0.000000] Call Trace:
    [ 0.000000] [<ffffffff814ee4fb>] dump_stack+0x54/0x8d
    [ 0.000000] [<ffffffff81062bcd>] warn_slowpath_common+0x7d/0xa0
    [ 0.000000] [<ffffffff81062c84>] warn_slowpath_fmt_taint+0x44/0x50
    [ 0.000000] [<ffffffff818fb9d9>] ? early_ioremap+0x13/0x15
    [ 0.000000] [<ffffffff818f1b3f>] ? __acpi_map_table+0x13/0x18
    [ 0.000000] [<ffffffff813d98be>] warn_invalid_dmar+0x7e/0x90
    [ 0.000000] [<ffffffff81927a65>] check_zero_address+0x68/0xf4
    [ 0.000000] [<ffffffff81927b06>] detect_intel_iommu+0x15/0xae
    [ 0.000000] [<ffffffff818ebd5a>] pci_iommu_alloc+0x4a/0x6c
    [ 0.000000] [<ffffffff818fb3af>] mem_init+0x17/0x9c
    [ 0.000000] [<ffffffff818e1ccb>] start_kernel+0x1de/0x420
    [ 0.000000] [<ffffffff818e18f6>] ? repair_env_string+0x5c/0x5c
    [ 0.000000] [<ffffffff818e1120>] ? early_idt_handlers+0x120/0x120
    [ 0.000000] [<ffffffff818e15de>] x86_64_start_reservations+0x2a/0x2c
    [ 0.000000] [<ffffffff818e16e8>] x86_64_start_kernel+0x108/0x117
    [ 0.000000] ---[ end trace ed55042d28ea2d46 ]---
    [ 0.000000] Memory: 12223184K/12501684K available (5124K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 278500K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 50331648 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 2394.605 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.76 BogoMIPS (lpj=7982016)
    [ 0.000004] pid_max: default: 32768 minimum: 301
    [ 0.000023] Security Framework initialized
    [ 0.000028] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000029] Yama: becoming mindful.
    [ 0.000723] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.002956] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.003897] Mount-cache hash table entries: 256
    [ 0.004021] Initializing cgroup subsys memory
    [ 0.004028] Initializing cgroup subsys devices
    [ 0.004029] Initializing cgroup subsys freezer
    [ 0.004030] Initializing cgroup subsys net_cls
    [ 0.004031] Initializing cgroup subsys blkio
    [ 0.004047] CPU: Physical Processor ID: 0
    [ 0.004047] CPU: Processor Core ID: 0
    [ 0.004050] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.004809] mce: CPU supports 9 MCE banks
    [ 0.004819] CPU0: Thermal monitoring enabled (TM1)
    [ 0.004828] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.004901] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    [ 0.005496] ACPI: Core revision 20130725
    [ 0.012467] ACPI: All ACPI Tables successfully acquired
    [ 0.014025] ftrace: allocating 20318 entries in 80 pages
    [ 0.020098] dmar: Host address width 39
    [ 0.020099] dmar: DRHD base: 0x00000000000000 flags: 0x1
    [ 0.020100] dmar: parse DMAR table failure.
    [ 0.020489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.053520] smpboot: CPU0: Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.053525] TSC deadline timer enabled
    [ 0.053531] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.053535] ... version: 3
    [ 0.053536] ... bit width: 48
    [ 0.053537] ... generic registers: 4
    [ 0.053537] ... value mask: 0000ffffffffffff
    [ 0.053538] ... max period: 0000ffffffffffff
    [ 0.053539] ... fixed-purpose events: 3
    [ 0.053539] ... event mask: 000000070000000f
    [ 0.094311] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.080318] smpboot: Booting Node 0, Processors # 1 # 2 # 3 # 4 # 5 # 6 # 7 OK
    [ 0.218665] Brought up 8 CPUs
    [ 0.218667] smpboot: Total of 8 processors activated (38329.08 BogoMIPS)
    [ 0.224614] devtmpfs: initialized
    [ 0.226265] PM: Registering ACPI NVS region [mem 0x9b172000-0x9b178fff] (28672 bytes)
    [ 0.226266] PM: Registering ACPI NVS region [mem 0xab78c000-0xabb73fff] (4096000 bytes)
    [ 0.226792] RTC time: 6:49:04, date: 01/11/14
    [ 0.226816] NET: Registered protocol family 16
    [ 0.226875] cpuidle: using governor ladder
    [ 0.226876] cpuidle: using governor menu
    [ 0.226893] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.226894] ACPI: bus type PCI registered
    [ 0.226896] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.226930] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.226931] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.231360] PCI: Using configuration type 1 for base access
    [ 0.231828] bio: create slab <bio-0> at 0
    [ 0.231908] ACPI: Added _OSI(Module Device)
    [ 0.231909] ACPI: Added _OSI(Processor Device)
    [ 0.231910] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.231911] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.233324] ACPI: EC: Detected MSI hardware, enabling workarounds.
    [ 0.233326] ACPI: EC: Look up EC in DSDT
    [ 0.233774] ACPI Error: No handler for Region [EC__] (ffff88033e484c18) [EmbeddedControl] (20130725/evregion-162)
    [ 0.233777] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20130725/exfldio-305)
    [ 0.233779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88033e4852f8), AE_NOT_EXIST (20130725/psparse-536)
    [ 0.234482] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.268613] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.284659] ACPI: SSDT 00000000ab68dc18 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.285133] ACPI: Dynamic OEM Table Load:
    [ 0.285135] ACPI: SSDT (null) 003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.298133] ACPI: SSDT 00000000ab68d618 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.298671] ACPI: Dynamic OEM Table Load:
    [ 0.298673] ACPI: SSDT (null) 005AA (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.314712] ACPI: SSDT 00000000ab68cd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.315188] ACPI: Dynamic OEM Table Load:
    [ 0.315190] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.339941] ACPI: Interpreter enabled
    [ 0.339948] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
    [ 0.339953] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
    [ 0.339965] ACPI: (supports S0 S3 S4 S5)
    [ 0.339967] ACPI: Using IOAPIC for interrupt routing
    [ 0.339990] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.340148] ACPI: No dock devices found.
    [ 0.366372] ACPI: Power Resource [FN00] (off)
    [ 0.366419] ACPI: Power Resource [FN01] (off)
    [ 0.366465] ACPI: Power Resource [FN02] (off)
    [ 0.366511] ACPI: Power Resource [FN03] (off)
    [ 0.366555] ACPI: Power Resource [FN04] (off)
    [ 0.367075] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.367173] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
    [ 0.367293] acpi PNP0A08:00: ACPI _OSC control (0x18) granted
    [ 0.367577] ACPI: \_SB_.PCI0.TPMX: can't evaluate _ADR (0x5)
    [ 0.367642] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
    [ 0.367643] ACPI: \_SB_.PCI0.DOCK: can't evaluate _ADR (0x5)
    [ 0.367659] ACPI: \_SB_.PCI0.WMI1: can't evaluate _ADR (0x5)
    [ 0.367660] PCI host bridge to bus 0000:00
    [ 0.367662] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.367663] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.367664] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.367665] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.367666] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.367667] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.367668] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.367669] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.367670] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.367671] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.367672] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xfeafffff]
    [ 0.367677] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.367735] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.367760] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.367794] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.367819] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.367827] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
    [ 0.367832] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
    [ 0.367835] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.367887] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.367893] pci 0000:00:03.0: reg 0x10: [mem 0xf7b14000-0xf7b17fff 64bit]
    [ 0.367970] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.367986] pci 0000:00:14.0: reg 0x10: [mem 0xf7b00000-0xf7b0ffff 64bit]
    [ 0.368043] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.368071] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.368097] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.368113] pci 0000:00:16.0: reg 0x10: [mem 0xf7b1e000-0xf7b1e00f 64bit]
    [ 0.368169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.368229] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.368247] pci 0000:00:1a.0: reg 0x10: [mem 0xf7b1c000-0xf7b1c3ff]
    [ 0.368328] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.368366] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.368391] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.368403] pci 0000:00:1b.0: reg 0x10: [mem 0xf7b10000-0xf7b13fff 64bit]
    [ 0.368460] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.368490] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.368512] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.368569] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.368599] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.368621] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.368678] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.368709] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.368731] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.368787] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.368817] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.368839] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
    [ 0.368896] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.368926] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.368953] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.368972] pci 0000:00:1d.0: reg 0x10: [mem 0xf7b1b000-0xf7b1b3ff]
    [ 0.369051] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.369089] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.369114] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.369249] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.369263] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.369269] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.369276] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.369283] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.369289] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.369296] pci 0000:00:1f.2: reg 0x24: [mem 0xf7b1a000-0xf7b1a7ff]
    [ 0.369328] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.369373] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.369385] pci 0000:00:1f.3: reg 0x10: [mem 0xf7b19000-0xf7b190ff 64bit]
    [ 0.369403] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.369506] pci 0000:01:00.0: [10de:11e2] type 00 class 0x030200
    [ 0.369520] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
    [ 0.369537] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.369552] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    [ 0.369563] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.369574] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
    [ 0.369649] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.374726] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.374728] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.374730] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.374733] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.374803] acpiphp: Slot [1] registered
    [ 0.374809] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.374970] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
    [ 0.375028] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a00fff]
    [ 0.375359] pci 0000:03:00.0: supports D1 D2
    [ 0.375360] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.375443] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.381443] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.381448] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.381581] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.381627] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf793ffff 64bit]
    [ 0.381672] pci 0000:04:00.0: reg 0x18: [io 0xd000-0xd07f]
    [ 0.381900] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.381990] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.388100] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.388104] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.388108] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.388207] pci 0000:05:00.0: [10ec:8723] type 00 class 0x028000
    [ 0.388235] pci 0000:05:00.0: reg 0x10: [io 0xc000-0xc0ff]
    [ 0.388284] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7803fff 64bit]
    [ 0.388429] pci 0000:05:00.0: supports D1 D2
    [ 0.388430] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.388469] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.394758] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.394762] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.394766] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.394830] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.402198] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402232] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.402263] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.402295] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.402326] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402357] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.402388] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.402419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.402688] ACPI: Enabled 5 GPEs in block 00 to 3F
    [ 0.402692] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.402741] Found 1 acpi root devices
    [ 0.402767] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.402823] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.402826] vgaarb: loaded
    [ 0.402826] vgaarb: bridge control possible 0000:00:02.0
    [ 0.402849] PCI: Using ACPI for IRQ routing
    [ 0.404045] PCI: pci_cache_line_size set to 64 bytes
    [ 0.404093] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.404094] e820: reserve RAM buffer [mem 0x9b172000-0x9bffffff]
    [ 0.404095] e820: reserve RAM buffer [mem 0x9b8e9000-0x9bffffff]
    [ 0.404096] e820: reserve RAM buffer [mem 0xab490000-0xabffffff]
    [ 0.404097] e820: reserve RAM buffer [mem 0xab78c000-0xabffffff]
    [ 0.404098] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
    [ 0.404149] NetLabel: Initializing
    [ 0.404150] NetLabel: domain hash size = 128
    [ 0.404150] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.404157] NetLabel: unlabeled traffic allowed by default
    [ 0.404169] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.404172] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.406193] Switched to clocksource hpet
    [ 0.408777] pnp: PnP ACPI init
    [ 0.408783] ACPI: bus type PNP registered
    [ 0.408822] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.408824] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.408831] pnp 00:01: [dma 4]
    [ 0.408839] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.408852] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.408908] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.408937] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.409005] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 0.409006] system 00:05: [io 0xffff] has been reserved
    [ 0.409007] system 00:05: [io 0xffff] has been reserved
    [ 0.409008] system 00:05: [io 0xffff] has been reserved
    [ 0.409010] system 00:05: [io 0x1c00-0x1cfe] has been reserved
    [ 0.409011] system 00:05: [io 0x1d00-0x1dfe] has been reserved
    [ 0.409012] system 00:05: [io 0x1e00-0x1efe] has been reserved
    [ 0.409013] system 00:05: [io 0x1f00-0x1ffe] has been reserved
    [ 0.409015] system 00:05: [io 0x1800-0x18fe] could not be reserved
    [ 0.409016] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 0.409017] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409033] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.409058] system 00:07: [io 0x1854-0x1857] has been reserved
    [ 0.409060] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.409121] system 00:08: [io 0x0680-0x068f] has been reserved
    [ 0.409122] system 00:08: [io 0x0c10-0x0c1f] has been reserved
    [ 0.409123] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409150] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.409152] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.409182] pnp 00:0a: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.409206] pnp 00:0b: Plug and Play ACPI device, IDs MSI0001 PNP030b (active)
    [ 0.412551] pnp 00:0c: Plug and Play ACPI device, IDs ENE0110 (active)
    [ 0.416130] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.416131] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.416132] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.416133] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.416135] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.416136] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.416137] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.416138] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.416139] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.416140] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.416142] system 00:0d: [mem 0xf7fef000-0xf7feffff] has been reserved
    [ 0.416143] system 00:0d: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
    [ 0.416144] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.416328] pnp: PnP ACPI: found 14 devices
    [ 0.416329] ACPI: bus type PNP unregistered
    [ 0.422174] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.422176] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.422177] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.422195] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.422196] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.422197] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.422200] pci 0000:00:1c.0: BAR 14: assigned [mem 0xaf200000-0xaf3fffff]
    [ 0.422202] pci 0000:00:1c.0: BAR 15: assigned [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422203] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.422205] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.422206] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.422208] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
    [ 0.422210] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422213] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.422215] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.422219] pci 0000:00:1c.0: bridge window [mem 0xaf200000-0xaf3fffff]
    [ 0.422222] pci 0000:00:1c.0: bridge window [mem 0xaf400000-0xaf5fffff 64bit pref]
    [ 0.422227] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.422231] pci 0000:00:1c.2: bridge window [mem 0xf7a00000-0xf7afffff]
    [ 0.422238] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.422240] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
    [ 0.422244] pci 0000:00:1c.3: bridge window [mem 0xf7900000-0xf79fffff]
    [ 0.422251] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.422253] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.422257] pci 0000:00:1c.5: bridge window [mem 0xf7800000-0xf78fffff]
    [ 0.422264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.422265] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.422266] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.422267] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.422268] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.422269] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.422270] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.422271] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.422272] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.422273] pci_bus 0000:00: resource 13 [mem 0xaf200000-0xfeafffff]
    [ 0.422274] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.422275] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
    [ 0.422276] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    [ 0.422277] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.422278] pci_bus 0000:02: resource 1 [mem 0

    If I understand this correctly, then you have an Optimus graphics card (couldn't find anything online, but your lspci looks like it). I too have such a setup on my laptop. The thing to keep in mind here, is that your main graphics card is the Intel integrated card. So instead of installing your system like with an nvidia card, you install it like an intel card. Specifically, you would want to follow the instructions on Bumblebee. Once you followed them, the whole graphics part runs on the Intel card. Once you want to play a game or do some other heavy graphics card work you call your application like this:
    optirun wine /path/to/game.exe
    Notice how optirun tells the system to use the nvidia card. It will take a second or two to start it (specifically, enable the card, start another X screen and launch the application on it transparently). Follow the instructions in the Wiki if you have any problems.
    If you don't have an Optimus card (just NVIDIA, no Intel), then don't follow any Optimus instructions, just usual NVIDIA stuff from the Wiki.

  • NVIDIA Optimus: Can't init X11

    I'm trying to install official drivers on Arch and run X11, but no luck so far...
    Graphic card is Nvidia740M (with intel on-chip gpu)
    followed the instructions here:
    https://wiki.archlinux.org/index.php/NVIDIA_Optimus
    But when starting X11 , I get the error: Screen(s) found, but none have a usable configuration. error, with the actual problem being related to Failed to assign any connected display devices to X screen 0.
    Been playing with this a day, and really getting frustrated, I also don't care about the intel driver, power-saving and switchable graphics like bumblebee
    I can only get it to work by installing open-source intel drivers (xf86-video-intel), nouveau also brings up the same error.
    .xinitrc
    xrandr --setprovideroutputsource modesetting NVIDIA-0
    xrandr --auto
    exec startxfce4
    /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 337.12 (buildmeister@swio-display-x64-rhel04-11) Fri Apr 4 15:17:56 PDT 2014
    Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia" 0 0
    Inactive "intel"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "keyboard"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:1:0:0"
    EndSection
    Section "Device"
    Identifier "intel"
    Driver "modesetting"
    EndSection
    Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "nvidia-auto-select"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "intel"
    Device "intel"
    Monitor "Monitor0"
    EndSection
    Xorg.0.log
    [ 119.012]
    X.Org X Server 1.15.1
    Release Date: 2014-04-13
    [ 119.020] X Protocol Version 11, Revision 0
    [ 119.023] Build Operating System: Linux 3.14.0-4-ARCH x86_64
    [ 119.025] Current Operating System: Linux sepul-desktop 3.14.2-1-ARCH #1 SMP PREEMPT Sun Apr 27 11:28:44 CEST 2014 x86_64
    [ 119.025] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda8 rw
    [ 119.030] Build Date: 14 April 2014 08:39:09AM
    [ 119.032]
    [ 119.035] Current version of pixman: 0.32.4
    [ 119.039] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 119.039] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 119.048] (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 6 07:10:00 2014
    [ 119.050] (==) Using config file: "/etc/X11/xorg.conf"
    [ 119.052] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 119.052] (==) ServerLayout "layout"
    [ 119.052] (**) |-->Screen "nvidia" (0)
    [ 119.052] (**) | |-->Monitor "Monitor0"
    [ 119.052] (**) | |-->Device "nvidia"
    [ 119.052] (**) |-->Inactive Device "intel"
    [ 119.052] (**) |-->Input Device "Keyboard0"
    [ 119.052] (**) |-->Input Device "Mouse0"
    [ 119.053] (==) Automatically adding devices
    [ 119.053] (==) Automatically enabling devices
    [ 119.053] (==) Automatically adding GPU devices
    [ 119.053] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 119.053] Entry deleted from font path.
    [ 119.053] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 119.053] Entry deleted from font path.
    [ 119.053] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 119.053] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 119.053] Entry deleted from font path.
    [ 119.053] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 119.053] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 119.053] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 119.053] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 119.053] (WW) Disabling Keyboard0
    [ 119.053] (WW) Disabling Mouse0
    [ 119.053] (II) Loader magic: 0x804c80
    [ 119.053] (II) Module ABI versions:
    [ 119.053] X.Org ANSI C Emulation: 0.4
    [ 119.053] X.Org Video Driver: 15.0
    [ 119.053] X.Org XInput driver : 20.0
    [ 119.053] X.Org Server Extension : 8.0
    [ 119.053] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 119.054] (--) PCI:*(0:0:2:0) 8086:0412:1043:8534 rev 6, Mem @ 0xde400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
    [ 119.054] (--) PCI: (0:1:0:0) 10de:1292:1043:85a1 rev 161, Mem @ 0xdd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 119.054] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 119.057] Initializing built-in extension Generic Event Extension
    [ 119.058] Initializing built-in extension SHAPE
    [ 119.060] Initializing built-in extension MIT-SHM
    [ 119.062] Initializing built-in extension XInputExtension
    [ 119.064] Initializing built-in extension XTEST
    [ 119.066] Initializing built-in extension BIG-REQUESTS
    [ 119.067] Initializing built-in extension SYNC
    [ 119.069] Initializing built-in extension XKEYBOARD
    [ 119.070] Initializing built-in extension XC-MISC
    [ 119.072] Initializing built-in extension SECURITY
    [ 119.074] Initializing built-in extension XINERAMA
    [ 119.075] Initializing built-in extension XFIXES
    [ 119.077] Initializing built-in extension RENDER
    [ 119.078] Initializing built-in extension RANDR
    [ 119.079] Initializing built-in extension COMPOSITE
    [ 119.081] Initializing built-in extension DAMAGE
    [ 119.082] Initializing built-in extension MIT-SCREEN-SAVER
    [ 119.083] Initializing built-in extension DOUBLE-BUFFER
    [ 119.085] Initializing built-in extension RECORD
    [ 119.086] Initializing built-in extension DPMS
    [ 119.087] Initializing built-in extension Present
    [ 119.089] Initializing built-in extension DRI3
    [ 119.090] Initializing built-in extension X-Resource
    [ 119.091] Initializing built-in extension XVideo
    [ 119.092] Initializing built-in extension XVideo-MotionCompensation
    [ 119.093] Initializing built-in extension XFree86-VidModeExtension
    [ 119.095] Initializing built-in extension XFree86-DGA
    [ 119.096] Initializing built-in extension XFree86-DRI
    [ 119.097] Initializing built-in extension DRI2
    [ 119.097] (II) LoadModule: "glx"
    [ 119.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 119.109] (II) Module glx: vendor="NVIDIA Corporation"
    [ 119.109] compiled for 4.0.2, module version = 1.0.0
    [ 119.109] Module class: X.Org Server Extension
    [ 119.109] (II) NVIDIA GLX Module 337.12 Fri Apr 4 14:34:00 PDT 2014
    [ 119.110] Loading extension GLX
    [ 119.110] (II) LoadModule: "nvidia"
    [ 119.111] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 119.111] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 119.111] compiled for 4.0.2, module version = 1.0.0
    [ 119.111] Module class: X.Org Video Driver
    [ 119.111] (II) LoadModule: "modesetting"
    [ 119.111] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 119.111] (II) Module modesetting: vendor="X.Org Foundation"
    [ 119.111] compiled for 1.15.0, module version = 0.8.1
    [ 119.111] Module class: X.Org Video Driver
    [ 119.111] ABI class: X.Org Video Driver, version 15.0
    [ 119.111] (II) NVIDIA dlloader X Driver 337.12 Fri Apr 4 14:13:45 PDT 2014
    [ 119.111] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 119.111] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 119.111] (++) using VT number 1
    [ 119.111] (II) Loading sub module "fb"
    [ 119.111] (II) LoadModule: "fb"
    [ 119.111] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 119.111] (II) Module fb: vendor="X.Org Foundation"
    [ 119.112] compiled for 1.15.1, module version = 1.0.0
    [ 119.112] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 119.112] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 119.112] (II) Loading sub module "wfb"
    [ 119.112] (II) LoadModule: "wfb"
    [ 119.112] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 119.112] (II) Module wfb: vendor="X.Org Foundation"
    [ 119.112] compiled for 1.15.1, module version = 1.0.0
    [ 119.112] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 119.112] (II) Loading sub module "ramdac"
    [ 119.112] (II) LoadModule: "ramdac"
    [ 119.112] (II) Module "ramdac" already built-in
    [ 119.113] (WW) Falling back to old probe method for modesetting
    [ 119.113] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 119.113] (==) NVIDIA(0): RGB weight 888
    [ 119.113] (==) NVIDIA(0): Default visual is TrueColor
    [ 119.113] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 119.113] (**) NVIDIA(0): Enabling 2D acceleration
    [ 119.426] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 119.427] (II) NVIDIA(0): NVIDIA GPU GeForce GT 740M (GK208) at PCI:1:0:0 (GPU-0)
    [ 119.427] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 119.427] (--) NVIDIA(0): VideoBIOS: 80.28.2a.00.20
    [ 119.427] (II) NVIDIA(0): Detected PCI Express Link width: 8X
    [ 119.432] (--) NVIDIA(0): Valid display device(s) on GeForce GT 740M at PCI:1:0:0
    [ 119.432] (--) NVIDIA(0): DFP-0
    [ 119.432] (--) NVIDIA(0): DFP-1
    [ 119.432] (--) NVIDIA(0): DFP-2
    [ 119.432] (--) NVIDIA(0): DFP-3
    [ 119.432] (--) NVIDIA(0): DFP-0: Internal TMDS
    [ 119.432] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
    [ 119.432] (--) NVIDIA(0): DFP-1: Internal TMDS
    [ 119.432] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [ 119.432] (--) NVIDIA(0): DFP-2: Internal DisplayPort
    [ 119.432] (--) NVIDIA(GPU-0): DFP-2: 480.0 MHz maximum pixel clock
    [ 119.432] (--) NVIDIA(0): DFP-3: Internal DisplayPort
    [ 119.432] (--) NVIDIA(GPU-0): DFP-3: 480.0 MHz maximum pixel clock
    [ 119.432] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
    [ 119.432] (EE) NVIDIA(0): Set AllowEmptyInitialConfiguration if you want the server
    [ 119.432] (EE) NVIDIA(0): to start anyway
    [ 119.449] (EE) NVIDIA(0): Failing initialization of X screen 0
    [ 119.449] (II) UnloadModule: "nvidia"
    [ 119.449] (II) UnloadSubModule: "wfb"
    [ 119.449] (II) UnloadSubModule: "fb"
    [ 119.449] (EE) Screen(s) found, but none have a usable configuration.
    [ 119.449] (EE)
    Fatal server error:
    [ 119.449] (EE) no screens found(EE)
    [ 119.449] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 119.449] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 119.449] (EE)
    [ 119.452] (EE) Server terminated with error (1). Closing log file.
    lsmod | grep nvidia
    nvidia 10784100 0
    drm 242043 1 nvidia
    i2c_core 25400 4 drm,i2c_i801,nvidia,videodev
    I also added nouveau to blacklist, and nvidia to mkinitcpio.conf
    Also tried added resolutions to xorg.conf, but still get the same error
    some stuff I'm curious about :
    - I installed xrandr after nvidia drivers, as the guide said, but xrandr doesn't work in terminal, brings up "no screens" error, is this normal ?
    - I also noticed that when I initialize X11 with intel (xf86-video-intel) drivers, xrandr shows VGA1, HDMI1, HDMI2, VIRTUAL as valid displays, but in the Xorg.log (nvidia) I don't any any of these enumerated.
    any hints or help ?
    thanks

    Why? it's the best way to get it to work.
    Tried bumblebee too, still get the same error, wanted to get things more simple and also try official nvidia (optimus)
    Check the xorg example on this page https://wiki.archlinux.org/index.php/NVIDIA_Optimus (this if you only want to use nvidia and disable intel).
    Don't forget to get the busID and add it to the xorg. Then try again.
    Yes, I have tried the xorg.conf written there. If you also see the current xorg.conf, it has BusID too. I don't get device not found error (which is the case for missing BusID)
    Does Intel device also need BusID too ?

  • My thinkpad t420s doesn't last 2 hours

    hardware and software:
    * thinkpad t420s, brand new with standard battery
    * CPU: i7-2640M CPU @ 2.80GHz, 4 cores. frequency scaling is enabled, they all usually run at 800MHz (ondemand governor)
    * intel SSD, no HDD
    * wifi: iwlwifi: Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
    * thinkfan is installed, but couldn't get it configured properly. TODO
    * kernel args
    [dieter@dieter-t420s ~]$ cat /proc/cmdline
    BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-root ro root=/dev/mapper/cryptpool-root cryptdevice=/dev/sda3:sda3crypt:allow-discards ro add_efi_memmap i915.modeset=1 i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 pcie_aspm=force quiet quiet add_efi_memmap
    bios options:
    * graphics is set to optimus (though i don't have bumblebee/optimus enabled right now, I haven't needed to attach an external display). TODO  force "built-in GPU" in bios, maybe that helps.
    * intel speedstep set to optimal battery usage when not on AC
    * adaptive thermal management set to "balanced" (it's that or performance)
    * cpu power management enabled
    * pci-e power management enabled
    test:with some basic usage (say 40 min of browsing over wifi and watching some vids, and the rest idle) it doesn't last 2 hours. (about 1h50min)
    although I think I have all the most important things taken care of, I'll also have a look at https://bbs.archlinux.org/viewtopic.php?id=134109 and maybe laptop mode tools (I did look at it, but as i don't have a HDD and i have frequency scaling already enabled...)
    I'll also need to try some power diagnostic tools like powertop or whatever it was.
    any more tips? this is kindof disappointing, I was expecting 4-5-6 hours.. thanks!
    Last edited by Dieter@be (2012-05-22 08:54:48)

    Dieter@be wrote:
    jdahm wrote:
    I have a T420 (didn't want to bother with the dedicated GPU) and get 6+ hours.  I followed the steps on 'Laptop' on the wiki, installed tp_smapi, thinkfan, granola, etc.
    i also had trouble getting thinkfan to work.  The trick I found with it is to stop the daemon and launch it manually (with the -n flag, as shown in the rc.d daemon script) to see what it complains about.  After a few iterations to thinkfan.conf the daemon seemed to start without problem.  This thread (found on the thinkwiki AUR page) helped me the most: http://ubuntuforums.org/showthread.php?t=1749186&page=1.
    thanks, so what's your thinkfan config?
    Here it is.  Hope this is helpful.  You'll probably need to run that find command and replace the four lines which start with "sensor".
    ## Notes:
    # sources:
    # + [url]http://ubuntuforums.org/showthread.php?t=1749186&page=1[/url]
    # Use this command to find devices:
    # find /sys/devices -type f -name "temp*_input"
    # Specify the fan to use
    fan /proc/acpi/ibm/fan
    # Sensors
    sensor /sys/devices/platform/coretemp.0/temp1_input
    sensor /sys/devices/platform/coretemp.0/temp2_input
    sensor /sys/devices/platform/coretemp.0/temp3_input
    sensor /sys/devices/virtual/hwmon/hwmon2/temp1_input
    #(0, 0, 55)
    #(1, 48, 60)
    #(2, 50, 61)
    #(3, 52, 63)
    #(4, 56, 65)
    #(5, 59, 66)
    #(7, 63, 32767)
    # More conservative settings
    (0, 0, 35)
    (1, 33, 38)
    (2, 36, 45)
    (3, 39, 49)
    (4, 46, 58)
    (5, 50, 62)
    (7, 56, 32767)
    Last edited by jdahm (2012-05-24 01:29:35)

  • Does anyone have three monitors working?

    A friend of mine who enjoys the piece of mind of using Linux, but not the poking and prodding recently "inherited" a good monitor in addition to the two he already had.
    He has two Nvidia cards. One came with the computer and has one out while the other card is much nicer and has dual outputs.
    Has anyone gotten three monitors to work in Linux? I googled, but it seems that most of the things I read are from 2004-ish, and it wasn't so good back then.

    AFAIK
    one screen on the old card, one screen with 2 monitors on the new one and in the ServerLayout section you declare both screens ala
    Section "ServerLayout"
    Identifier "MEGAMONITORZ"
    Screen "OldScreen"
    Screen "NewScreen" LeftOf "OldScreen"
    EndSection

  • Black screen - Xorg/GDM config - Nvidia Optimus? [solved]

    Hi!
    I have a Samsung RC539 S09, which has got an Nvidia Optimus graphics card, I want a graphical Xserver on that machine. Therefore I followed the wiki and installed the Nvidia stuff (https://wiki.archlinux.org/index.php/NVIDIA). I did not configure anything jet. I also installed the Xorg stuff and kept the config default (https://wiki.archlinux.org/index.php/Xorg). Then I did nvidia-xconfig:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 280.13 ([email protected]
    ia.com) Wed Jul 27 17:15:58 PDT 2011
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    I have dbus runnung and do rc.d/gdm start.
    [root@myhost ~]# gdm-binary[1147]: WARNING: GdmDisplay: display lasted 1.143111 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029825 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029360 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029428 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029470 seconds
    gdm-binary[1147]: WARNING: GdmDisplay: display lasted 0.029108 seconds
    gdm-binary[1147]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
    My logfile says, that after successfully loading the modules, the failure occures at:
    [ 591.812] (EE) No devices detected.
    [ 591.812]
    Fatal server error:
    [ 591.812] no screens found
    [ 591.812]
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    What does that mean? - No devices detected - can refer to these Nvidia Optimus stuff, where there's some ondemand switching for graphics acceleration afaik. I'm not sure how to solve my issue. So at this point could need some help
    Best,
    wishi
    edit: got this working with the intel stuff. Did onyone archive GPU support jet?
    Last edited by windsheep (2011-08-20 20:34:25)

    first at all check
    lspci | grep -i vga
    I have optimus and I see both cards, Intel and nVidia.
    What do you see?
    If you install xf86-video-intel instead of nvidia driver, does it work then? (backup & remove /etc/X11/xorg.conf then)
    I had to disable optimus and switch to my dedicated nVidia graphics card  in bios in order to make nvidia driver work.
    Now I'm using intel with bumblebee (optimus support for linux) & optimus enabled in bios, and bumblebee loads proprietary nvidia drivers when required.
    But I also have a thinkpad t510, I don't know if bumblebee works with your device.
    cheers, kulpae
    Last edited by kulpae (2011-08-20 14:45:41)

  • Does Presentation Director support rotated monitors on nVidia cards in a T61?

    I'm finding it doesn't. Some of the people here have extra monitors they like to rotate 90 degrees. Presentation Director is not happy.
    Any ideas?
    ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
    Windows 7 Enterprise and Windows XP Pro

    I'm finding it doesn't. Some of the people here have extra monitors they like to rotate 90 degrees. Presentation Director is not happy.
    Any ideas?
    ThinkPad T61 15 Widescreen with nVidia Quadro graphics 6459CTO
    Windows 7 Enterprise and Windows XP Pro

  • CS6/Bridge doesn't use GPU on Nvidia Optimus machines

    Photoshop CS6/Bridge
    Win8.1 64bit/Nvidia GTX 870M
    Is there a way to force Adobe Bridge to using the Nvidia GPU rather than “software rendering”?
    The problem: Starting Bridge on notebooks with the Nvidia Optimus (I tested several) in “preferences -advanced”, the option, “use software rendering”, is not tagged which is correct.
    But as soon as I open an image and recheck with the preferences, “use software rendering” is tagged and greyed out, hence zooming and all other manipulations suffer from a lack of speed and smoothness, slide-show for ex. is not usable at all.
    I’m familiar with the Nvidia control panel and of course the Nvidia GPU is assigned to Bridge.exe there.
    Strange enough, in the registry, the Bridge – preferences value for “use software rendering” always stays on “0”, which is correct.
    BTW. Photoshop is running fine on the Nvidia GPU.
    It is a shame that Bridge performs a lot better on a 6 years old laptop than on a brand new high end gaming machine only because there is Optimus on board.
    Does anybody have an idea for a workaround?

    Is there any insight here? I can't seem to get my brand new work y70 to use the NVidia graphics card for any external displays! What the heck is going on!? And, moreso, why can't even the crummy Intel onboard graphics push 2560 x 1600 via either HDMI or USB (through a replicator)? I've had a 30" monitor running 2560 x 1600 for 5 years. This is a brand new laptop and can't push out high res?! It's crazy to me!! EDIT: I presently have the Intel display adapter disabled in the device manager. I have video on the laptop display but I can no longer get ANY external displays to work. Which means, to me, it would seem that the NVidia GPU is 100% relegated to the laptop display, ONLY.

Maybe you are looking for

  • Linking to mailboxes from elsewhere in the filesystem (or reverse)

    Hi, I'm quite disappointed with how Mail integrates with the rest of the filesystem. Basically if I have a folder somewhere on the Mac I would like to have an alias or a pointer or something in it, which takes me immediately to the mailboxes I deem r

  • SQL Script to MS Access compatable

    Hello Guys, I have a SQL script that I want to change to be able to function in Access. The script uses some outer join (+) clause in the where clause. I want to do the same outer join in Access 2002. The script is below. Some of the code have alread

  • Need help with a small application

    Hi all, I please need help with a small application that I need to do for a homework assignment. Here is what I need to do: "Write an application that creates a frame with one button. Every time the button is clicked, the button must be changed to a

  • Have the URL to save the Web Intelligence Report to be saved as excel.

    Hi, As per our project requirement,we need to have a url to provided to the end users and so that once the users login using their id,they directly get option of saving the excel file. Let me know if you guys can provide me with a suggestion? Regards

  • Office control in mobile client 7.1

    Hi all, i've included an office control in my mobile application to show a word document. However, when i open my application, i receive following error: Fatal HTTP error 500 occured. Connection is closed now. The exact error information is logged in