Thinkpad T510 6-Cell vs. 9-Cell Battery
For a Thinkpad T510 with 128gb SSD, i5-540 processor, nvidia 3100m 512 mb discrete graphics, and 4 gb RAM, does a 6-cell battery cut it? How much time should I expect with a 6-cell and with a 9-cell battery? Also, by how much does the 9-cell protrude past the back of the laptop?
I have a 6 cell with my T510 and I'd say for normal usage (browsing internet on youtube, watching some news clips, reading email, surfing the net and stuff) the usual time I get on performance setting is around 2 hours. If intend to take this out and use it for a day, 2 hours certainly won't cut it.
Similar Messages
-
Hi I wanted a 6 cell or 9 cell battery for Paivilion N037tx NoteBook location Pakistan help me to purchase a battery if its available in my country ?<script charset="UTF-8" type="application/javascript" src="chrome://hdv/content/hdv.js"></script>
Yes.
Per the Lenovo web site, for each battery, "Its compatible design allows it to be in the system when the system is connected to ThinkPad X200 UltraBase."
Message Edited by bananaman on 10-11-2008 09:30 PM
I don't work for Lenovo. I'm a crazy volunteer! -
I recently (about 2 months ago) purchased a Lenovo Thinkpad T510 laptop. Ever since I got it, I have the brightness on 50%, and only use it to surf the internet. My battery life is 2:50 at the maximum.
I have a warrenty for the laptop, could I call in and get another battery for free?
It is quite inconvienent to have to charge and recharge at least twice every day. It makes portability almost impossible.
Solved!
Go to Solution.Do you have discrete graphics? If so, it sounds about right for an untweaked system. There are a few tricks to battery life optimization with the NVidia GPU involving PowerMizer.
http://somemorebytes.com/wp/index.php/software/nvpmmanager/
Enable PowerMizer, and use Max power save on battery.
Also put your CPU into the lowest speed in Power Manager's advanced mode (battery only; AC should be adaptive).
Also, defrag.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
Difference between 6-cell and 9-cell battery
Can someone please explain the difference between a 6-cell Extended Life battery (HP's # WD548AA#ABB) and a 9-cell Extended Life battery (HP's #WD549AA#ABB)? At first I figured the 9-cell must be an extended life battery and the 6-cell was a standard battery. Then I looked at the descriptions of each and they were virtually identical and BOTH are called Extended Life. They are both listed as compatible with my G62 notebook but there's about a $20 difference.
cjperry56You have the six cell MUO6
MU09 is the nine cell -
3 cell vs 6 cell battery for Netbook
I am going to buy a Netbook in the next couple weeks and had a question about the difference betwween the 6 cell and 3 cell lithium battery. Things like weight and runtime especially.
Thanks to all who reply.The weight difference between different size Netbook batteries depends on the model. And also whether it is from a third party vendor which presents other issues (may not fit as well, and may not deliver advertised battery life0. The official manufacturer batteries are best, but at times I have dabbled in third party like for my Asus EEE where I bought the big 9-cell from the company in the Netherlands. It looked very nice and does work, but never approached the longevity advertised and it also is tricky to latch on one side (and when your battery slips and you're not plugged in, it is a bummer).
Specs on weights are difficult to come by from third party companies as they don't want to scare off folks who have a svelte netbook. Original netbook vendors' specs are easier to find.
Some models of the Acer Aspire netbooks have a 2.19 pound 3-cell and a 2.78 pound 6-cell. A jump to a 9-cell may approach double the weight of a 3-cell. One thing to be aware of is the bigger battery is slightly uglier, so you pay for the extra juice. It may interfere with fully reclining the screen also although normal viewing angles are fine.
The question I have is...what Netbook are you considering? I have seen a few models (Dell, HP, Toshiba, Asus, Acer). Out of those I like the Asus and Toshiba best for battery life and reliability and the Dell and HP lagging a bit. I don't think I would buy an Acer based on some I have come across, but YMMV and the price is definitely attractive. In any case budget $50 to imemdiately pull the little 1 GB RAM module out and get a 2 GB replacement. It will be 15% faster and well worth it. -
[SOLVED] Thinkpad T510, freezes on battery power
My Thinkpad T510 will freeze after anything from a few seconds to a few minutes after boot. I cannot do anything except hard power off the laptop. Sometimes it freezes at the login screen, sometimes at the desktop. So far it hasn't frozen on boot. I'm using Gnome 3 and GDM. Laptop-mode which is enabled on battery and AC power. I'm using the nvidia graphics card with proprietary drivers.
I actually had a similar problem to this before, where it would freeze on battery power but much less often, usually anything from 10 minutes to hours after boot. It seemed like that problem had been fixed, but it has come back much, much worse.
I wonder if the updated Nvidia 302 drivers are to blame, but I have no idea how I might go about finding out.
Last edited by themusicalduck (2012-07-22 11:27:02)EDIT: I found the laptop will still freeze once it had reached low battery power. To fix it properly, I backed up and then replaced the entire contents of /usr/lib/pm-utils/power.d/wireless with
#!/bin/sh
/sbin/iwconfig wlan0 power off
I ran the laptop down to critical battery level and had no freeze.
After hours of trawling Google, I *think* I've found a solution. At least it's been running for a good half hour now without freezing.
To fix, open up /usr/lib/pm-utils/power.d/wireless
Find the section -
case $1 in
true) wireless_powersave on ;;
false) wireless_powersave off ;;
*) exit $NA ;;
esac
and change it to -
case $1 in
true) wireless_powersave off ;;
false) wireless_powersave off ;;
*) exit $NA ;;
esac
Last edited by themusicalduck (2012-07-28 04:59:01) -
Hi gang, new member and new owner of the mighty Thinkpads
My questions for the forum are as follows:
I purchased a stripped T510 with no battery , caddy or hard drive.
I purchased a new 6 cell battery and hard drive caddy and now have a problem deciding which ssd to choose.
I have my eye on:
OCZ Agility 3 60gb ( agt3-25sat3-60g )
OCZ Vertex 2 90gb ( oczssd3-2vtx90g )
Or any intel ssd thats at least 60gb
I understand the T510 is limited to its sata 2 controller(3gb/s) and it is fine. Im not going to use my laptop to break any speed records. I will be getting an ultabay and adding a cheap 320gb hard drive 7925DDfor storage or just use my external enclosure and the delicious eSata port ( i get excited about my laptop easily) so I am not worried about the difference in ssd capacity all that much(60 gb vs 90)
What I am interested in is the experience of the forum in regards to what ssd the T510 will play nice with.
Should I stay away from OCZ or Intel? I can update firmware if necessary but would like a good dependable ssd to use.
Windows 7 will be my OS.
Thanks for any advices.
Lenovo Thinkpad T510 | [email protected] | 4GB PC8500 | Win7Welcome to the forum!
I'm currently using several Intel 320 series SSDs along with a Crucial M4 (lenovo version, known as Micron C400) and these would get my highest recommendations.
My experiences with OCZ have been mixed, and I'm being kind here. The customer support in itself left a *lot* to be desired.
My $0.02 only.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
[SOLVED] Thinkpad T510 - Intel Core i7 - Integrated Graphics
Hi,
i recent bought a ThinkPad T510 4349-2RG with an Intel Core i7 M 620 built-in. There is also an NVIDIA NVS 3100.
According to the Intel-Homepage, my CPU should have an integrated GPU (http://www.intel.com/products/processor … ations.htm).
The NVIDIA card just works fine with the latest binary driver. But I would also like to use the integrated Intel GMA (Battery life) and/or bumblebee.
The problem is that the Intel GMA dont get recognized by the kernel, but its also not visible in BIOS (normally there should be an option to select between "Intel integrated" "discrete" and "Optimus" - i've updated to the latest BIOS version 1.44). I double-checked this with a live CD of Ubuntu Linux 11.04 (also only NVIDIA).
Is there any option to get this running?
Output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
[ 0.000000] BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf76c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf76c000 - 00000000bf778000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf778000 - 00000000bf77b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf77b000 - 00000000bf78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 43492RG/43492RG, BIOS 6MET84WW (1.44 ) 03/29/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f68b0] f68b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bf766000-bf76c000
[ 0.000000] RAMDISK: 378a4000 - 37c4a000
[ 0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf7ef2e1 00094 (v01 LENOVO TP-6M 00001440 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ef400 000F4 (v04 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7ef7d1 0F34F (v01 LENOVO TP-6M 00001440 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf6e7000 00040
[ 0.000000] ACPI: SSDT 00000000bf7ef5b4 0021D (v01 LENOVO TP-6M 00001440 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bf7feb20 00052 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feb72 00084 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7fec2e 0003C (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bf7fec6a 00038 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bf7fedbe 000A4 (v16 LENOVO TP-6M 00001440 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee62 00176 (v01 LENOVO TP-6M 00001440 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fefd8 00028 (v01 LENOVO TP-6M 00001440 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6e591a 0084B (v01 LENOVO TP-6M 00001440 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 00000000bf77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf778000 0049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf27c
[ 0.000000] 0: 0x000bf282 -> 0x000bf35f
[ 0.000000] 0: 0x000bf40f -> 0x000bf46f
[ 0.000000] 0: 0x000bf70f -> 0x000bf717
[ 0.000000] 0: 0x000bf71f -> 0x000bf76c
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1012637
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 764999 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[ 0.000000] PM: Registered nosave memory: 00000000bf35f000 - 00000000bf371000
[ 0.000000] PM: Registered nosave memory: 00000000bf371000 - 00000000bf3f2000
[ 0.000000] PM: Registered nosave memory: 00000000bf3f2000 - 00000000bf40f000
[ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf668000
[ 0.000000] PM: Registered nosave memory: 00000000bf668000 - 00000000bf6e8000
[ 0.000000] PM: Registered nosave memory: 00000000bf6e8000 - 00000000bf70f000
[ 0.000000] PM: Registered nosave memory: 00000000bf717000 - 00000000bf71f000
[ 0.000000] PM: Registered nosave memory: 00000000bf76c000 - 00000000bf778000
[ 0.000000] PM: Registered nosave memory: 00000000bf778000 - 00000000bf77b000
[ 0.000000] PM: Registered nosave memory: 00000000bf77b000 - 00000000bf78b000
[ 0.000000] PM: Registered nosave memory: 00000000bf78b000 - 00000000bf78c000
[ 0.000000] PM: Registered nosave memory: 00000000bf78c000 - 00000000bf79f000
[ 0.000000] PM: Registered nosave memory: 00000000bf79f000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf000000 s82176 r8192 d24320 u524288
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995159
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3913576k/5111808k available (3803k kernel code, 1061260k absent, 136972k reserved, 3404k data, 556k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2659.762 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.17 BogoMIPS (lpj=8865873)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000087] Security Framework initialized
[ 0.000092] AppArmor: AppArmor disabled by boot time parameter
[ 0.000341] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001352] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001814] Mount-cache hash table entries: 256
[ 0.002092] Initializing cgroup subsys ns
[ 0.002094] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.002096] Initializing cgroup subsys cpuacct
[ 0.002119] Initializing cgroup subsys memory
[ 0.002132] Initializing cgroup subsys devices
[ 0.002133] Initializing cgroup subsys freezer
[ 0.002135] Initializing cgroup subsys net_cls
[ 0.002136] Initializing cgroup subsys blkio
[ 0.002173] CPU: Physical Processor ID: 0
[ 0.002173] CPU: Processor Core ID: 0
[ 0.002178] mce: CPU supports 9 MCE banks
[ 0.002186] CPU0: Thermal monitoring enabled (TM1)
[ 0.002193] using mwait in idle threads.
[ 0.002908] ACPI: Core revision 20110112
[ 0.046003] Setting APIC routing to flat
[ 0.046400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079318] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05
[ 0.184270] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.184275] ... version: 3
[ 0.184276] ... bit width: 48
[ 0.184277] ... generic registers: 4
[ 0.184278] ... value mask: 0000ffffffffffff
[ 0.184279] ... max period: 000000007fffffff
[ 0.184279] ... fixed-purpose events: 3
[ 0.184280] ... event mask: 000000070000000f
[ 0.194351] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.207564] Booting Node 0, Processors #1
[ 0.320658] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.330605] #2
[ 0.443696] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.453626] #3 Ok.
[ 0.566717] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.569973] Brought up 4 CPUs
[ 0.569977] Total of 4 processors activated (21287.06 BogoMIPS).
[ 0.572103] devtmpfs: initialized
[ 0.573048] NET: Registered protocol family 16
[ 0.573151] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.573153] ACPI: bus type pci registered
[ 0.573289] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.573306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.626058] PCI: Using configuration type 1 for base access
[ 0.626414] bio: create slab <bio-0> at 0
[ 0.627742] ACPI: EC: EC description table is found, configuring boot EC
[ 0.631332] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.722020] ACPI: SSDT 00000000bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.722304] ACPI: Dynamic OEM Table Load:
[ 0.722306] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.722404] ACPI: SSDT 00000000bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.722696] ACPI: Dynamic OEM Table Load:
[ 0.722698] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.743120] ACPI: SSDT 00000000bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.743438] ACPI: Dynamic OEM Table Load:
[ 0.743440] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.752996] ACPI: SSDT 00000000bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.753290] ACPI: Dynamic OEM Table Load:
[ 0.753291] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.764288] ACPI: Interpreter enabled
[ 0.764290] ACPI: (supports S0 S3 S4 S5)
[ 0.764305] ACPI: Using IOAPIC for interrupt routing
[ 0.769164] ACPI: Power Resource [PUBS] (on)
[ 0.772489] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.790239] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.790241] HEST: Table not found.
[ 0.790243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.790253] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.790291] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.790309] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.790324] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.790337] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.790349] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.790362] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.790387] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.790612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.790654] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.790656] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.790657] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.790659] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.790660] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.790662] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.790669] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.790682] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.790695] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.790715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.790717] pci 0000:00:01.0: PME# disabled
[ 0.790762] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.790789] pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit]
[ 0.790862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.790866] pci 0000:00:16.0: PME# disabled
[ 0.790894] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[ 0.790918] pci 0000:00:16.3: reg 10: [io 0x1800-0x1807]
[ 0.790929] pci 0000:00:16.3: reg 14: [mem 0xf2424000-0xf2424fff]
[ 0.791035] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.791058] pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff]
[ 0.791069] pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff]
[ 0.791079] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.791147] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.791151] pci 0000:00:19.0: PME# disabled
[ 0.791180] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.791203] pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff]
[ 0.791289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.791293] pci 0000:00:1a.0: PME# disabled
[ 0.791321] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.791341] pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit]
[ 0.791415] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.791419] pci 0000:00:1b.0: PME# disabled
[ 0.791445] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.791518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.791523] pci 0000:00:1c.0: PME# disabled
[ 0.791549] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.791622] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.791626] pci 0000:00:1c.1: PME# disabled
[ 0.791652] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.791728] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.791732] pci 0000:00:1c.3: PME# disabled
[ 0.791760] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.791836] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.791840] pci 0000:00:1c.4: PME# disabled
[ 0.791876] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.791900] pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff]
[ 0.791986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.791990] pci 0000:00:1d.0: PME# disabled
[ 0.792013] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.792086] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.792199] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.792224] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.792235] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.792245] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.792256] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.792266] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.792276] pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff]
[ 0.792321] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.792325] pci 0000:00:1f.2: PME# disabled
[ 0.792347] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.792367] pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit]
[ 0.792396] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
[ 0.792440] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.792466] pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit]
[ 0.792577] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[ 0.792588] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
[ 0.792600] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.792612] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.792621] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.792629] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.792681] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.792693] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
[ 0.792779] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.792781] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.792783] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.792785] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.792841] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.792846] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.792850] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.792857] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.792994] pci 0000:03:00.0: [8086:4239] type 0 class 0x000280
[ 0.793051] pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
[ 0.793229] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.793255] pci 0000:03:00.0: PME# disabled
[ 0.793326] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.793331] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.793335] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.793342] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.793396] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.793400] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.793404] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.793411] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.793533] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805
[ 0.793555] pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
[ 0.793687] pci 0000:0d:00.0: supports D1 D2
[ 0.793688] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.793693] pci 0000:0d:00.0: PME# disabled
[ 0.793743] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880
[ 0.793765] pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
[ 0.793897] pci 0000:0d:00.1: supports D1 D2
[ 0.793899] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.793904] pci 0000:0d:00.1: PME# disabled
[ 0.793949] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
[ 0.793971] pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff]
[ 0.794103] pci 0000:0d:00.3: supports D1 D2
[ 0.794104] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.794109] pci 0000:0d:00.3: PME# disabled
[ 0.794175] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.794179] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.794184] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.794190] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.794260] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.794264] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.794269] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.794276] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.794278] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.794279] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.794281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.794282] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.794284] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.794285] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.794317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.794387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.794408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.794426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.794446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.794466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.794560] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.797337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797382] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797418] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.797464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797549] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.797629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797706] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.797709] vgaarb: loaded
[ 0.797759] PCI: Using ACPI for IRQ routing
[ 0.797761] PCI: pci_cache_line_size set to 64 bytes
[ 0.797850] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.797852] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[ 0.797855] reserve RAM buffer: 00000000bf35f000 - 00000000bfffffff
[ 0.797858] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[ 0.797861] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[ 0.797864] reserve RAM buffer: 00000000bf76c000 - 00000000bfffffff
[ 0.797866] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.797962] NetLabel: Initializing
[ 0.797963] NetLabel: domain hash size = 128
[ 0.797964] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.797975] NetLabel: unlabeled traffic allowed by default
[ 0.797989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.797993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.800008] Switching to clocksource hpet
[ 0.800954] pnp: PnP ACPI init
[ 0.800967] ACPI: bus type pnp registered
[ 0.801465] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.801466] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.801468] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.801469] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.801470] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.801471] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.801473] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.801474] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.801475] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.801476] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.801478] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.801479] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.801480] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.801481] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.801482] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.801484] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.801485] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.801536] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.801538] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.801539] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.801541] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.801543] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.801544] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.801546] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.801548] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.801550] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.801551] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.801553] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.801555] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.801556] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.801559] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.801560] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.801563] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.801572] pnp 00:01: [bus ff]
[ 0.801603] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.801614] pnp 00:02: [bus 00-fe]
[ 0.801617] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.801619] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.801620] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.801621] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.801623] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.801624] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.801625] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.801626] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.801628] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.801629] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.801630] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.801632] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.801633] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.801634] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.801636] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.801637] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.801638] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.801639] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.801669] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.801905] pnp 00:03: [io 0x0010-0x001f]
[ 0.801906] pnp 00:03: [io 0x0090-0x009f]
[ 0.801908] pnp 00:03: [io 0x0024-0x0025]
[ 0.801909] pnp 00:03: [io 0x0028-0x0029]
[ 0.801910] pnp 00:03: [io 0x002c-0x002d]
[ 0.801911] pnp 00:03: [io 0x0030-0x0031]
[ 0.801912] pnp 00:03: [io 0x0034-0x0035]
[ 0.801913] pnp 00:03: [io 0x0038-0x0039]
[ 0.801914] pnp 00:03: [io 0x003c-0x003d]
[ 0.801915] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.801916] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.801917] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.801919] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.801920] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.801921] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.801922] pnp 00:03: [io 0x0050-0x0053]
[ 0.801923] pnp 00:03: [io 0x0072-0x0077]
[ 0.801924] pnp 00:03: [io 0x164e-0x164f]
[ 0.801925] pnp 00:03: [io 0x002e-0x002f]
[ 0.801926] pnp 00:03: [io 0x1000-0x107f]
[ 0.801927] pnp 00:03: [io 0x1180-0x11ff]
[ 0.801928] pnp 00:03: [io 0x0800-0x080f]
[ 0.801930] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.801931] pnp 00:03: [io 0x1600-0x1641]
[ 0.801933] pnp 00:03: [io 0x1644-0x167f]
[ 0.801934] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.801936] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[ 0.801937] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.801938] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.801939] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.801940] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.801942] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.802000] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.802002] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.802003] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.802005] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.802007] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.802008] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.802010] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.802012] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.802014] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.802016] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.802017] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.802019] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.802021] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.802024] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.802027] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.802048] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.802071] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.802077] pnp 00:05: [io 0x0000-0x000f]
[ 0.802079] pnp 00:05: [io 0x0080-0x008f]
[ 0.802080] pnp 00:05: [io 0x00c0-0x00df]
[ 0.802081] pnp 00:05: [dma 4]
[ 0.802102] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.802106] pnp 00:06: [io 0x0061]
[ 0.802128] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.802133] pnp 00:07: [io 0x00f0]
[ 0.802141] pnp 00:07: [irq 13]
[ 0.802162] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.802168] pnp 00:08: [io 0x0070-0x0071]
[ 0.802172] pnp 00:08: [irq 8]
[ 0.802194] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.802199] pnp 00:09: [io 0x0060]
[ 0.802201] pnp 00:09: [io 0x0064]
[ 0.802205] pnp 00:09: [irq 1]
[ 0.802225] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.802234] pnp 00:0a: [irq 12]
[ 0.802257] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.802507] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.802532] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.802723] Switched to NOHz mode on CPU #0
[ 0.802766] Switched to NOHz mode on CPU #1
[ 0.802790] Switched to NOHz mode on CPU #2
[ 0.802827] Switched to NOHz mode on CPU #3
[ 0.803136] pnp: PnP ACPI: found 12 devices
[ 0.803138] ACPI: ACPI bus type pnp unregistered
[ 0.809007] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.809010] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.809011] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.809014] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.809016] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.809019] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.809020] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.809025] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.809029] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.809036] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.809037] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.809042] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.809046] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.809053] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.809056] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.809061] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.809066] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.809073] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.809074] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.809079] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.809083] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.809089] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.809090] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.809096] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.809100] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.809113] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.809115] pci 0000:00:01.0: setting latency timer to 64
[ 0.809122] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.809126] pci 0000:00:1c.0: setting latency timer to 64
[ 0.809133] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.809137] pci 0000:00:1c.1: setting latency timer to 64
[ 0.809144] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.809148] pci 0000:00:1c.3: setting latency timer to 64
[ 0.809154] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.809158] pci 0000:00:1c.4: setting latency timer to 64
[ 0.809166] pci 0000:00:1e.0: setting latency timer to 64
[ 0.809169] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.809171] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.809172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809173] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.809175] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.809176] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.809178] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.809179] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.809180] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.809182] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.809183] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.809185] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.809186] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.809188] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.809189] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.809191] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.809192] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809193] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.809195] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.809196] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.809250] NET: Registered protocol family 2
[ 0.809382] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.810140] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.811876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.812095] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.812096] TCP reno registered
[ 0.812105] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.812123] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.812327] NET: Registered protocol family 1
[ 0.812454] pci 0000:01:00.0: Boot video device
[ 0.812477] PCI: CLS 64 bytes, default 64
[ 0.812522] Unpacking initramfs...
[ 0.857049] Freeing initrd memory: 3736k freed
[ 0.857674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.857678] Placing 64MB software IO TLB between ffff8800bb000000 - ffff8800bf000000
[ 0.857679] software IO TLB at phys 0xbb000000 - 0xbf000000
[ 0.857724] Simple Boot Flag at 0x35 set to 0x1
[ 0.858111] audit: initializing netlink socket (disabled)
[ 0.858121] type=2000 audit(1307283181.596:1): initialized
[ 0.858513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.860249] VFS: Disk quotas dquot_6.5.2
[ 0.860346] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.860468] msgmni has been set to 7651
[ 0.860628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.860658] io scheduler noop registered
[ 0.860660] io scheduler deadline registered
[ 0.860695] io scheduler cfq registered (default)
[ 0.860786] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.860808] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.861983] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011100000, using 4032k, total 4032k
[ 0.861984] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.861986] vesafb: scrolling: redraw
[ 0.861987] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.968425] Console: switching to colour frame buffer device 160x50
[ 1.066719] fb0: VESA VGA frame buffer device
[ 1.066729] intel_idle: MWAIT substates: 0x1120
[ 1.066730] intel_idle: v0.4 model 0x25
[ 1.066731] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.066771] ERST: Table is not found!
[ 1.066819] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.269059] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.289528] 0000:00:16.3: ttyS0 at I/O 0x1800 (irq = 17) is a 16550A
[ 1.342184] Linux agpgart interface v0.103
[ 1.342250] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.346699] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.346724] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.346788] mousedev: PS/2 mouse device common for all mice
[ 1.346843] rtc_cmos 00:08: RTC can wake from S4
[ 1.350225] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.368707] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.368742] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.368818] cpuidle: using governor ladder
[ 1.368930] cpuidle: using governor menu
[ 1.369080] TCP cubic registered
[ 1.369082] NET: Registered protocol family 17
[ 1.369089] Registering the dns_resolver key type
[ 1.369166] PM: Hibernation image not present or could not be loaded.
[ 1.369169] registered taskstats version 1
[ 1.369764] rtc_cmos 00:08: setting system clock to 2011-06-05 14:13:03 UTC (1307283183)
[ 1.369887] Initalizing network drop monitor service
[ 1.371869] Freeing unused kernel memory: 556k freed
[ 1.372006] Write protecting the kernel read-only data: 6144k
[ 1.374036] Freeing unused kernel memory: 276k freed
[ 1.379233] Freeing unused kernel memory: 820k freed
[ 1.414655] <30>udevd[108]: starting version 171
[ 1.795803] SCSI subsystem initialized
[ 1.809210] libata version 3.00 loaded.
[ 1.814738] ahci 0000:00:1f.2: version 3.0
[ 1.814756] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.814819] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.814859] ahci: SSS flag set, parallel bus scan disabled
[ 1.814905] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.814907] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.814912] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.834923] scsi0 : ahci
[ 1.835114] scsi1 : ahci
[ 1.835275] scsi2 : ahci
[ 1.835441] scsi3 : ahci
[ 1.835597] scsi4 : ahci
[ 1.835756] scsi5 : ahci
[ 1.836192] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41
[ 1.836195] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41
[ 1.836196] ata3: DUMMY
[ 1.836197] ata4: DUMMY
[ 1.836199] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41
[ 1.836202] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41
[ 1.857446] Refined TSC clocksource calibration: 2660.001 MHz.
[ 1.857456] Switching to clocksource tsc
[ 2.153375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.154602] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.154609] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.154838] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.154845] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.155842] ata1.00: ATA-8: HITACHI HTS725032A9A364, PC3ZC70F, max UDMA/100
[ 2.155847] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.157009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.157015] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.157216] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.157222] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.158183] ata1.00: configured for UDMA/100
[ 2.158419] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72503 PC3Z PQ: 0 ANSI: 5
[ 2.475905] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.478447] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.478687] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.480225] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT10, max UDMA/66
[ 2.482926] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.483159] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.484661] ata2.00: configured for UDMA/66
[ 2.486427] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT10 PQ: 0 ANSI: 5
[ 2.805075] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.124275] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.138114] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.138157] sd 0:0:0:0: [sda] Write Protect is off
[ 3.138160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.138177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.140674] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.140675] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.140862] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.181948] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.182662] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.561285] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.402659] <30>udevd[721]: starting version 171
[ 5.616621] ACPI: acpi_idle yielding to intel_idle
[ 5.735472] fuse init (API version 7.16)
[ 6.027584] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.027967] ACPI: AC Adapter [AC] (on-line)
[ 6.033128] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 6.035503] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.035505] ACPI: Thermal Zone [THM0] (55 C)
[ 6.041710] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 6.041730] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.041916] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 6.042077] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 6.049877] Non-volatile memory driver v1.3
[ 6.059884] ACPI: Lid Switch [LID]
[ 6.059942] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 6.060605] acpi device:0c: registered as cooling_device4
[ 6.060954] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.060959] ACPI: Battery Slot [BAT0] (battery present)
[ 6.061014] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input3
[ 6.061019] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 6.070674] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.070713] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.080171] ACPI: Sleep Button [SLPB]
[ 6.080265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.080270] ACPI: Power Button [PWRF]
[ 6.094462] wmi: Mapper loaded
[ 6.119199] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.120805] iTCO_vendor_support: vendor-support=0
[ 6.255308] usbcore: registered new interface driver usbfs
[ 6.255333] usbcore: registered new interface driver hub
[ 6.255381] usbcore: registered new device driver usb
[ 6.255833] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.255940] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[ 6.256006] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.264694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.264718] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.264723] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.264733] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 6.264753] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.264757] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.264776] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.277774] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 6.277776] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.279704] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.283605] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 6.283623] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
[ 6.296289] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.296427] hub 1-0:1.0: USB hub found
[ 6.296432] hub 1-0:1.0: 3 ports detected
[ 6.296507] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.296510] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.296518] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.296544] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.296547] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.296554] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.304884] sdhci: Secure Digital Host Controller Interface driver
[ 6.304886] sdhci: Copyright(c) Pierre Ossman
[ 6.306021] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 6.306036] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.306060] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6.306067] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 6.306109] Registered led device: mmc0::
[ 6.306154] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 6.316265] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.320131] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 6.320137] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
[ 6.332863] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.332976] hub 2-0:1.0: USB hub found
[ 6.332980] hub 2-0:1.0: 3 ports detected
[ 6.333103] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.333112] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.333275] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 6.359105] cfg80211: Calling CRDA to update world regulatory domain
[ 6.408944] WARNING! power/level is deprecated; use power/control instead
[ 6.422229] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.422238] firewire_ohci 0000:0d:00.3: setting latency timer to 64
[ 6.426433] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 6.426435] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.426436] thinkpad_acpi: ThinkPad BIOS 6MET84WW (1.44 ), EC 6MHT44WW-1.19
[ 6.426437] thinkpad_acpi: Lenovo ThinkPad T510, model 43492RG
[ 6.427467] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 6.427632] thinkpad_acpi: radio switch found; radios are enabled
[ 6.429394] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.429879] Registered led device: tpacpi::thinklight
[ 6.429909] Registered led device: tpacpi::power
[ 6.429964] Registered led device: tpacpi::standby
[ 6.430024] Registered led device: tpacpi::thinkvantage
[ 6.432085] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 6.432190] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 6.433196] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 6.482754] firewire_ohci 0000:0d:00.3: irq 43 for MSI/MSI-X
[ 6.482808] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 6.512966] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:ff:35:0a:f1:53
[ 6.512970] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.513038] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 6.513160] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.523606] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 6.605540] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 6.690249] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.711176] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 6.717350] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.717428] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.717460] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.720938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.720939] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.720992] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.721001] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.721041] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 6.729127] hub 1-1:1.0: USB hub found
[ 6.729174] hub 1-1:1.0: 6 ports detected
[ 6.737518] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 6.737520] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 6.737538] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 6.737612] iwlagn 0000:03:00.0: irq 45 for MSI/MSI-X
[ 6.821935] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 6.823671] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.823675] hda_intel: Disable MSI for Nvidia chipset
[ 6.823724] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.838298] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 6.857486] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[ 6.879747] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.960609] nvidia: module license 'NVIDIA' taints kernel.
[ 6.960613] Disabling lock debugging due to kernel taint
[ 6.965263] hub 2-1:1.0: USB hub found
[ 6.965341] hub 2-1:1.0: 8 ports detected
[ 6.981344] firewire_core: created device fw0: GUID 5cff35ff0af153ff, S400
[ 7.031306] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
[ 7.187532] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[ 7.353763] usb 1-1.6: new high speed USB device using ehci_hcd and address 5
[ 7.513384] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[ 7.645548] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
[ 7.645677] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 7.645694] usbcore: registered new interface driver usbhid
[ 7.645695] usbhid: USB HID core driver
[ 7.709967] Linux video capture interface: v2.00
[ 7.719955] Bluetooth: Core ver 2.15
[ 7.720090] NET: Registered protocol family 31
[ 7.720092] Bluetooth: HCI device and connection manager initialized
[ 7.720094] Bluetooth: HCI socket layer initialized
[ 7.725241] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 7.726401] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[ 7.726462] usbcore: registered new interface driver uvcvideo
[ 7.726464] USB Video Class driver (v1.0.0)
[ 7.758706] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.758969] usbcore: registered new interface driver btusb
[ 7.779741] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.779747] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.779755] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.779763] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.779767] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.779885] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.19 Mon May 16 23:32:08 PDT 2011
[ 8.276265] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 8.463589] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.602283] Adding 5276876k swap on /dev/sda2. Priority:-1 extents:1 across:5276876k
[ 11.373150] coretemp coretemp.0: TjMax is 105 C.
[ 11.373202] coretemp coretemp.2: TjMax is 105 C.
[ 11.535629] thinkpad_ec: thinkpad_ec 0.40 loaded.
[ 11.537879] hdaps: initial mode latch is 0x05
[ 11.538022] hdaps: setting ec_rate=250, filter_order=2
[ 11.538240] hdaps: device successfully initialized.
[ 11.538282] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input11
[ 11.538405] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input12
[ 11.538480] hdaps: driver successfully loaded.
[ 12.724831] tp_smapi 0.40 loading...
[ 12.725385] tp_smapi successfully loaded (smapi_port=0xb2).
[ 13.850893] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 13.903961] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.462951] NET: Registered protocol family 10
[ 15.463466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.463569] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.483544] wlan0: authenticate with 00:04:0e:ed:fd:00 (try 1)
[ 22.485591] wlan0: authenticated
[ 22.529427] wlan0: associate with 00:04:0e:ed:fd:00 (try 1)
[ 22.534940] wlan0: RX AssocResp from 00:04:0e:ed:fd:00 (capab=0x11 status=0 aid=2)
[ 22.534944] wlan0: associated
[ 22.537651] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.636802] padlock_aes: VIA PadLock not detected.
[ 23.420441] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 28.197892] EXT4-fs (sda5): re-mounted. Opts: barrier=1,data=ordered,commit=15
[ 28.203962] EXT4-fs (sda6): re-mounted. Opts: commit=15
[ 33.568008] wlan0: no IPv6 routers present
[ 816.256803] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2026.078172] usb 1-1.4: USB disconnect, address 4
Output of lspci -v
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Lenovo Device 2193
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-cdefffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Lenovo Device 215f
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f2427800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06) (prog-if 02 [16550])
Subsystem: Lenovo Device 2162
Flags: 66MHz, fast devsel, IRQ 17
I/O ports at 1800 [size=8]
Memory at f2424000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
Subsystem: Lenovo Device 2153
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at f2400000 (32-bit, non-prefetchable) [size=128K]
Memory at f2425000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 2163
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f2428000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Lenovo Device 215e
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f2420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
MemoSort of solved...
NOTE!
While almost all new ThinkPads have integrated Intel HD Graphics, on those ThinkPads with a Descrete NVIDIA GPU, the Intel GPU is disabled and cannot be enabled. There is no support for Switchable Graphics.
NOTE!
Contrary to the statement above, you can select the GPU in the BIOS of recent models with Nvidia Optimus, e.g. the T510 4384GEG. Windows seems to be able to switch between the GPUs, too.
http://www.thinkwiki.org/wiki/Intel_HD_Graphics
I guess there is no way getting this to work, unless Lenovo unlocks this feature via BIOS-update.
Greetings -
I've been trying to find comparison pictures of the X220 with a 6-cell and 9-cell battery, without much luck. I want to see how much the 9-cell sticks out vs the 6-cell.
Has anyone seen such a picture anywhere?
| X220 i7-2620M | 12.5" IPS | Intel 520 Series 180GB Main SSD | Mushkin 120GB mSATA SSD | 8GB RAM | Intel 6205 WiFi | BT | Win7 Pro 64 SP1 |Hi,
I'm going to buy a X220. I think I'll avoid the 9 cell battery just because it sticks out in the back. Anyway also the 6 cell it sticks out a little bit in the bottom, as you can see here, even if that doesn't give problems of stabilty as stated here. So I was wondering if buying a 4 cell battery, but before I'd like to know if the 4 cell battery is taller as the 6 cell one or less. Do you have any idea? -
Hi. I have an issue: how can I tell the type of battery I have to a S10e; it says on the back of it: 11.1 V - 28 Wh - 2.38 Ah
Does it have 3 cells or 6 cells? thank you.Yours is a 3 cell as the 6 cells will show the same voltage of 11.1V but with 52Wh (or around that, depending on the actual make of the batery).
View my Blog on the Lenovo S10 -
Drag the component from one cell to another cell within JTable
Hi All,
I have one requirement to drag the component from JList to JTable cell. I am able to do it but once if i drag the component from list to table cell, table accepting the drop after this i am unable to move the same component from one cell to another cell within the table.
Any advice.
I have used the following logic for JTable and JList is drag enabled.
DefaultTableModel tableModel=new DefaultTableModel(
new Object [][] {
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null}
new String [] {
"Title 1", "Title 2", "Title 3", "Title 4","Title 5","Title 6","Title 7"
JTable table = new javax.swing.JTable(){
public boolean isCellEditable(int row, int column)
return false;
table.setModel(tableModel);
table.setDragEnabled(true);
table.setDropMode(DropMode.INSERT);
table.setTransferHandler(new TransferHandler(){
public boolean canImport(TransferHandler.TransferSupport info){
if (!info.isDataFlavorSupported(DataFlavor.stringFlavor)){
return false;
return true;
public boolean importData(TransferSupport support) {
if (!support.isDrop()) {
return false;
if (!canImport(support)) {
return false;
JTable table=(JTable)support.getComponent();
DefaultTableModel tableModel=(DefaultTableModel)table.getModel();
// fetch the drop location
JTable.DropLocation dl = (JTable.DropLocation)support.getDropLocation();
int row = dl.getRow();
int col=dl.getColumn();
// fetch the data and bail if this fails
String data;
try {
data = (String)support.getTransferable().getTransferData(DataFlavor.stringFlavor);
} catch (UnsupportedFlavorException e) {
return false;
} catch (IOException e) {
return false;
calendarTableModel.setValueAt(data, row, col);
return true;
});Thanks & Regards,
Maadhav.
Edited by: maadhav on Jun 23, 2009 12:29 AMHi All,
I fixed this issue with some additional logic which allow me to drag and drop the string component from one cell to another cell within in the JTable.
I am attaching the new logic here, if any one needs use it.
DefaultTableModel tableModel=new DefaultTableModel(
new Object [][] {
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null},
{null, null, null, null,null,null,null}
new String [] {
"Title 1", "Title 2", "Title 3", "Title 4","Title 5","Title 6","Title 7"
JTable table = new javax.swing.JTable(){
public boolean isCellEditable(int row, int column)
return false;
table.setModel(tableModel);
table.setDragEnabled(true);
table.setDropMode(DropMode.USE_SELECTION);
table.setTransferHandler(new TransferHandler(){
public int getSourceActions(JComponent c) {
return DnDConstants.ACTION_COPY_OR_MOVE;
public Transferable createTransferable(JComponent comp)
JTable table=(JTable)comp;
int row=table.getSelectedRow();
int col=table.getSelectedColumn();
String value = (String)table.getModel().getValueAt(row,col);
StringSelection transferable = new StringSelection(value);
table.getModel().setValueAt(null,row,col);
return transferable;
public boolean canImport(TransferHandler.TransferSupport info){
if (!info.isDataFlavorSupported(DataFlavor.stringFlavor)){
return false;
return true;
public boolean importData(TransferSupport support) {
if (!support.isDrop()) {
return false;
if (!canImport(support)) {
return false;
JTable table=(JTable)support.getComponent();
DefaultTableModel tableModel=(DefaultTableModel)table.getModel();
JTable.DropLocation dl = (JTable.DropLocation)support.getDropLocation();
int row = dl.getRow();
int col=dl.getColumn();
String data;
try {
data = (String)support.getTransferable().getTransferData(DataFlavor.stringFlavor);
} catch (UnsupportedFlavorException e) {
return false;
} catch (IOException e) {
return false;
tableModel.setValueAt(data, row, col);
return true;
});Thanks & Regards,
Maadhav..
Edited by: maadhav on Jun 23, 2009 5:26 AM
Edited by: maadhav on Jun 23, 2009 5:28 AM -
ThinkPad T510 type 4313 Windows 7 64 bit- sound in and out
Hi,
I bought my ThinkPad T510 in March 2011, had purchased a 1 year warranty, which has expired. My sound issue started almost 2 months ago. While watching DVD's, videos online at any site from yahoo, facebook, youtube, netflix, hulu etc my sound will stop completely while the video still runs. I have to press the volume buttons on the keyboard either up or down to turn the sound back on temporarily. The sound may come back on for 15 minutes or 5 seconds. Sometimes the volume buttons are not effective and then I have to click on the speaker button in the bottom right hand side of the screen to manually slide the volume button up or down.
It seems like such a small problem with an easy fix, but it is extremely frustrating when watching for example, a 30 second video and having to hover over the volume button.
I've tried everything.
- Called Lenovo for support or direction for this quick fix that should be available (I can't be the only one with this issue, because I've never had this problem before). This issue isn't familiar, I can ship it in, and possibly pay up to $600 for them to locate and fix the issue.
- Updating the Conexant drivers
- Removing current driver and having it auto reinstall most up to date driver
- trying the diagnose & fix app on here which found nothing wrong
- Ran my Norton virus check
- removed all cookies and history
- Updated the conexant drivers from the Lenovo Support tab
- Used monthly Norton phone support 3 different times to diagnose and fix the issue
I am at a loss, please help.
I've been told it could be a hardware issue or the VOIP may need to be turned off. Norton cannot touch "the brain"over the phoneHey Soundless,
Have you updated your BIOS to 1.52?
Try to find older audio driver versions and see if it works.
Also, check in Device Manager under your audio devices and make sure that you don't have any audio drivers conflicting with each other.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
ThinkPad T510: eSata External Hard Drive Not Working with Windows 7...
Hey folks,
My LaCie Quadra 1TB drive arrived on Monday and the Quadra disconnects 1 minute into any copy / move function using the eSata connection. The USB 2.0 connection works just fine, however, I invested the extra money in a Quadra specifically to take advantage of eSata connection and would like to get this working.
I received the following from LaCie support:
"...the issue with eSATA and large or small drives on Windows 7 is a known issue. However, it is not limited to LaCie drives and we believe this to be a Windows 7 driver issue from Microsoft... using a third party eSATA card with its own drivers does eliminate the issue."
So, before I spend another £50 on an eSata ExpressCard trying to fix something that should work out of the box:
Any idea how to get my eSata drive working on my ThinkPad T510 or ThinkPad Mini Dock Plus Series 3?
Does the ThinkPad Mini Dock Plus Series 3 eSata connector have its own drivers, as this - ideally - is where I'd like my external drive to be permanenelty connected.
Kind regards,
John DiddyHi Bananaman,
Nope. tried a new eSATA cable and the issues are exactly the same.
LaCie recommend an ExpressCard with it's own drivers to resolve the problem. Trying to avoid this route as I intend to use the drive for regular backups and running virtual machines so it'll be used heavily and I'd rather not have a cable sticking out of the side instead of the docking station!
Any further thoughts? -
Temperature Reading for Thinkpad T510 Usage
Hi All,
I got a question regarding the standard / acceptable temperature operating range for the thinkpad t510 laptops. So my setup currently is my t510 is connected to an external monitor, external speakers, external keyboard and mouse. So it is essentially a desktop except using the innerds of the laptop as the "heart" of the system. My power manager has set the cpu to be adaptive. The temperature readings I am getting for the CPU and the Motherboard from downloading the program called Speccy from Piriform are at an average of 60 and 61 degrees C. I am wondering if that is within normal operating temperature for the laptop and if it is acceptable. Or is this temperature not ok and the reason why it is so high is that I am using the externals. Also, I am not even using heavy load work for the laptop besides for web browsing and listening to music and working on documents / spread sheet so basically office work.
And lastly, would the temperature problem be solved if in the future I would to get a w530 laptop since those laptops are more "powerful"?? Or is that wrong and the temperature is normal.
Thanks in advance for answers
Solved!
Go to Solution.unit88888888 wrote:
Is it because of the confined space or is it because the cpu is i7??
Either or both, It also depends on what you're doing with the T510. If the CPU is running hard that will definitely raise the temperature compared to idle/light load.
Make sure the fan air exhaust (and intake if the T510 has one) grilles aren't obstructed. Leave a few inches to let air circulate.
Also consider:
1. Place plastic or wood spacers below the unit to raise it an inch or so above the desktop.
2. Use a USB-powered notebook fan base/pad to circulate air beneath the unit.
Neither will make a huge improvement but they'll both help.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30 -
hi I'm from Italy.
ok so i'm trying to do a conditional format on numbers if "a cell" = greater than or text then make the same cell
or another cell do something like insert a number or change color.
Does anybody knows how to do that on numbers?. thanks.Among the things you'll learn from the User Guide:
Conditional formatting can be used to change the style of the text in a cell and/or the fill colour of the cell.
A formula may be used to set the value in a cell. In both cases, the format rule or the formula affects only the cell to which the rule is attached or which contains the formula. Neither values or formats may be 'pushed' onto another cell.
Regards,
Barry
Maybe you are looking for
-
Hi All, In OIM how can i use my own/Custom API"S. Wher do i need to place the Jar/Class files. Like in other Identity Management tools (I only have the experience of SUN) you can place the files under WEB-INF/lib or WEB-INF/classes and then can easil
-
How do you add DNS server to a VNET?
I'm trying to create a VM to serve as a DNS server for my VNET, but when I attempt to create a new VM, I'm forced to select one of the subnets I created, which would render it inaccessible from all other subnets. How are you supposed to create a VM i
-
Audit log is not showing any data GRC 10 PC
Hi, when we are trying to execute the audit logs under reports in process controls,not showing data and getting error like no data matching the entere selec criteria. do we need any configuration changes required Thanks GRC Admin
-
Why does my screen scroll to the bottom automatically after I've entered a new website on a new tab?
When I'm on a website and click onto information or another site from this open window, a new tab is opened with the new info or website. However, while waiting for that site to load in the new tab, the site is automatically scrolled to the bottom be
-
Hi, I'm just getting started and i need to know what is the best way to develop an web service in apex ou expose functionality as such. Is this possible or do i have to buy some product to do this? If so, which one? Thanks in advance. Best Regards, P