ThinkPad T510 - both sets of mouse buttons acting strange
A few days ago, on my ThinkPad t510, the mouse buttons for both trackpad and trackpoint went haywire. Left clicks were registering as right click.. and right click buttons did nothing.
At first, I thought "haha, someone's pulled a prank on me and swapped them".. Negative. After checking in mouse control panel, all was well. Ran System Update and Windows Update, all up to date. Ran the gamut of spyware and malware tools, nothing.
Then I booted into a Live Linux environment, to eliminate the possibility of undetected malware and anything on the Windows 7 install itself being corrupt. Same thing was going on.
If I use a usb external mouse, it fixes it, but still the integrated right click buttons don't work.
I've ordered a new keyboard and palmrest w/ trackpad assembly, in case it's that... so we shall see.
However, has anyone had anything like this happen? Or have any idea what may be causing it?
Hi, I got the same problem on my T510 4313 , this weekend. I tried the configuration , but eventually just reloaded the OS , factory reinstall. it worked for an afternoon and back to the same problem. I see you ordered the new keybaord and palm rest, did that fix the problem?
Similar Messages
-
Mouse is acting strange (only in PS)
In every other application, a short move in the mouse goes from side to side of the screen but is not happening in PS. The ratio tablet-screen is 1:1 now. If the cursor is in the center of the screen and I lift the mouse and put it down again at a different area of the tablet, it won't stay in the center of the screen but move to the screen point relative to the tablet (am I being clear?). I set mouse acceleration and mouse speed to the max and nothing changes.
I'm using PS CS5 and Wacom Intuos3I did and they are all the same. Not that I can do too much with the mouse mapping. The pen has the Full or Portion options but not the mouse. My pen is set on full because that is what I want and it moves fast. The mouse is acting as in Full, but moving slower than the pen.
-
Magic mouse suddenly acting strange?
My magic mouse stopped functioning normally... single click acts like double click... Text selection tool is wonky; drag select words ends up selecting entire paragraph... could not move objects around in InDesign... can barely move finder and application windows, it lags and move only a short distance... delayed reactions all round. I cannot even move icons around on the desktop…I am using Wacom tablet (usb) right now.
Changed batteries
Tried to turn bluetooth off and back on; no change.
Tried removing apple and bluetooh related plist's: no change.
Also tried to lower the 'power' setting on my Bell modem default was 4 went down to 3 (whatever that means) also made no difference. I Don’t want to reduce the quality of my internet connection to fix interference on my bluetooth signal (if this is the issue). I even pulled the power plug on my modem no wiFi
... and still, my mouse has gone rogue!
I have read quite a few posts (some go back a few years) with similar issues and have yet to find a solution. Zapping P ram seem a little excessive - any thoughts?
Any solutions? Is it possible, these little magic mice just simply have a short lifespan : (
The only computer/software changes were done months ago (new internet service & hardware Early Jan) and (Mavericks when it was released last year)
Any help is appreciated. Thanks in advance!
DbonteHi seventy one, Thanks again for all your help. I finally got the magic mouse to work properly... After I spent two days reading posts, troubleshooting and finally posting my querie... It came back to the 1st thing i looked at!
The batteries.
I have been using (the same 4) rechargable AA batteries since the life of the mouse. And even though they showed as 100% charged in the system mouse preferences, the batteries must have weakened over time.
I popped in a fresh set of (off the shelf) Duracells and POW! no more crazy mouse action. I know that Apple has it's own charger & rechargable batteries for its products; so I may look into this. In the meantime, I think it pays to have good quality batteries for something I use (and need) every day.
Im a bit embarrased that I didn't figure this out in the beginning : [
happy that its working again : )
Db -
Hello
I am making my umteenth recital DVD for the 2009 season, and I have encountered a problem that I cannot fathom or solve.
I have a master track with the entire recital and have created stories for each performance. I have a menu with 33 buttons, all of which work as designed, except one. This miscreant, when activated, puts the player into stop mode. If you hit the play button, the player starts over at the beginning of the disk. The target is set properly and all of my usual troubleshooting efforts have failed.
Any ideas what the gremlin is? Is there a limit to the number of buttons on a standard no frills menu?
Thank youBy any chance when you simulate are you using your mouse? I just realized that if navigation was not set for the last two buttons, they would never be accessible on a DVD Player via the remote, so when you say they are not working, and if they are not highlighting, that could be it. (Actually thought of that after I wrote what follows, because I realized that this could be what you mean by not working. Take a look at the navigation and check by using the controller in Simulator and not the mouse.)
Now the part I did write before the part above:
You can delete PAR and items should be rebuilt, for instance if you have your m2vs in a folder called "M2VS" there will be PAR folder in there. Take a look in your destination preferences to see where the various items are being written, PAR and MPEG folders (unless those are actual folders you created and put things into) should be deleted. FWIW, as a matter of course, I never use either of those as names for folders.
31 is strange, SD 4:3 is 36 buttons, 16:9 is 18 (12 with Pan & Scan/Letterbox), HD 4:3 48 and 16:9 24 (16 with P&S/Letterbox)
How are you making the menus, using a template or other item?
How are you burning the DVD? Sounds like something else may be going on. This is a SD DVD and not a HD DVD? Can you open up the VIDEO_TS folder in Apple DVD Player and does the project work properly, including all the buttons? -
Firefox 4 middle mouse button click acts different from v3
clicking on the middle mouse button (not scrolling) acts like "open link in duplicated tab" rather than how it used to act like "open link in new tab".
It places the new tab at the bottom/end of the list of tabs rather than how it used to as a child of the tab in which the middle button was clicked.
Is there an option to change this behavior?jscher2000: THANK YOU. The thread was doubly useful.
1. I had the same problem to cor-el's post to "Set the pref browser.tabs.insertRelatedAfterCurrent to true on the about:config page" as orwel had: it will not be changed.
2. I disabled my addons one by one and found that THE PROBLEM WAS with Duplicate This Tab 1.2 When it is disabled, the center mouse click works as it used to -- and I assume this means 'correctly'. Certainly it's the way I want it to work:-)
3. I am new to this support path. If you think the information I just posted can help those on the thread you pointed to, and you are so inclined, please inform them about Duplicate This Tab 1.2 should anyone there be using it. -
Mouse left button acting like right button
I have a MacBook black with snow Leopard. My mouse is acting up. On both the laptop and a usb mouse the left button is acting like athe write button by bringing up action boxes instead of just doing the deffault action. for example I go to the task bar and to open a program and the box "open/ options" open up. what's the solution?
Is the Control key stuck down? Try another keyboard.
-
Lenovo Thinkpad Compact USB Keyboard with Trackpoint: Middle mouse button and scrolling
I got this keyboard (KU-1255).
Unfortunately, it generates bogus mouse button events if I click the middle mouse button and use the trackpoint:
With "thinkpad scrolling mode" disabled, the middle mouse button is released as soon as I move the trackpoint while still pressing the button!
Expected behaviour: The middle mouse button is pressed, the event created. Moving the trackpoint moves the cursor normally. Releasing the middle button creates a corresponding event.
With "thinkpad scrolling mode" enabled, the button is registered as pressed, then scrolling occurs as I move the trackpoint and the button is released if I release it.
Expected behaviour: No middle mouse button event is registered if I move the trackpoint. Pressing and releasing the middle mouse button is only registered if I click the button without moving the trackpoint.
When will there be a firmware update available for the keyboard, like for the SK-8855?
Since I am also using Linux, I would be really interested in fixing this in the firmware, not only getting a new Windows driver.Help please.
-
Map Thinkpad Mouse Buttons to Keyboard Key
Peace all!
Does anyone know of a way to map the thinkpad mouse buttons to a normal keyboard key? I am unable to identify any mappable keycode using xev. Is it hardwired or something?
ButtonPress event, serial 34, synthetic NO, window 0x4600001,
root 0x115, subw 0x0, time 3353217, (155,11), root:(901,337),
state 0x0, button 1, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4600001,
root 0x115, subw 0x0, time 3353326, (155,11), root:(901,337),
state 0x100, button 1, same_screen YES
What I've managed to do is the opposite; map a keyboard key to a mouse button.
http://www.geocities.jp/fred_b_maciel/kbd/kbd-e.html
Basically involves using the Accessibility X mouse controlling feature(usually using numpad keys); remapping those to other keys.
Thanks in advance?http://wiki.archlinux.org/index.php/Map … o_keycodes
I presume I have to use this?
http://wiki.archlinux.org/index.php/Setkeycodes
The only way to detect a scancode is with,
dmesg|tail -10
fact, any time we press a key which has a scancode but no keycode, the kernel suggests us to use just 'setkeycodes' to
The problem is thinkpad's mouse buttons are already bound. Is there another way to find out?
The "Using HAL" website is broken.
Also, is there a way to determine if the keys are actually hardware bound? Some of the thinkpad's keys are eg. FN keys and maybe the mute/light keys. In that case, there's no point in continuing further. -
Can I set my middle mouse button to pan?
Is it possible in Preferences to set my middle mouse button to temporarily become the "hand" tool so that I can pan?
I switch back and forth between InDesign CS3 and AutoCAD, and my middle mouse button is PAN in CAD. It drives me crazy to switch back and forth. I'd love it if I could make them the same.
I know that I can use the space bar, but I'm lazy and I've developed habits after using CAD exclusively for the last 3 years. I just started using IND again at my new job so this is the first time I've really had to switch between the two.Check with mouse manufacturer. There is nothing in InDesign you can set
for that. -
Left mouse button does not act as an enter action
In some applications, I have noticed that clicking the left mouse button of the wireless mighty mouse (or the USB version) does not result in ENTER and I have to press the enter button on the keyboard. eg in ITunes, to cause a song to play, I have to hit the enter button. Is this the way it should work, or do I have a problem? Phil
Hi Phil;
I just tested iTunes on my Mac. I was able to get a song to play by depressing the left mouse button twice.
Allan -
[SOLVED] Thinkpad T510 - Intel Core i7 - Integrated Graphics
Hi,
i recent bought a ThinkPad T510 4349-2RG with an Intel Core i7 M 620 built-in. There is also an NVIDIA NVS 3100.
According to the Intel-Homepage, my CPU should have an integrated GPU (http://www.intel.com/products/processor … ations.htm).
The NVIDIA card just works fine with the latest binary driver. But I would also like to use the integrated Intel GMA (Battery life) and/or bumblebee.
The problem is that the Intel GMA dont get recognized by the kernel, but its also not visible in BIOS (normally there should be an option to select between "Intel integrated" "discrete" and "Optimus" - i've updated to the latest BIOS version 1.44). I double-checked this with a live CD of Ubuntu Linux 11.04 (also only NVIDIA).
Is there any option to get this running?
Output of dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110513 (prerelease) (GCC) ) #1 SMP PREEMPT Mon May 23 22:02:08 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
[ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
[ 0.000000] BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf76c000 (usable)
[ 0.000000] BIOS-e820: 00000000bf76c000 - 00000000bf778000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf778000 - 00000000bf77b000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf77b000 - 00000000bf78b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 43492RG/43492RG, BIOS 6MET84WW (1.44 ) 03/29/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 138000000 mask FF8000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f68b0] f68b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf800000
[ 0.000000] 0000000000 - 00bf800000 page 2M
[ 0.000000] kernel direct mapping tables up to bf800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ bf766000-bf76c000
[ 0.000000] RAMDISK: 378a4000 - 37c4a000
[ 0.000000] ACPI: RSDP 00000000000f6870 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf7ef2e1 00094 (v01 LENOVO TP-6M 00001440 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf7ef400 000F4 (v04 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7ef7d1 0F34F (v01 LENOVO TP-6M 00001440 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf6e7000 00040
[ 0.000000] ACPI: SSDT 00000000bf7ef5b4 0021D (v01 LENOVO TP-6M 00001440 MSFT 03000001)
[ 0.000000] ACPI: ECDT 00000000bf7feb20 00052 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bf7feb72 00084 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7fec2e 0003C (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bf7fec6a 00038 (v01 LENOVO TP-6M 00001440 LNVO 00000001)
[ 0.000000] ACPI: ASF! 00000000bf7fedbe 000A4 (v16 LENOVO TP-6M 00001440 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bf7fee62 00176 (v01 LENOVO TP-6M 00001440 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf7fefd8 00028 (v01 LENOVO TP-6M 00001440 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6e591a 0084B (v01 LENOVO TP-6M 00001440 INTL 20050513)
[ 0.000000] ACPI: TCPA 00000000bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52)
[ 0.000000] ACPI: SSDT 00000000bf77a000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf779000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 00000000bf778000 0049F (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880134000000-ffff8801377fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[8] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bf27c
[ 0.000000] 0: 0x000bf282 -> 0x000bf35f
[ 0.000000] 0: 0x000bf40f -> 0x000bf46f
[ 0.000000] 0: 0x000bf70f -> 0x000bf717
[ 0.000000] 0: 0x000bf71f -> 0x000bf76c
[ 0.000000] 0: 0x000bf7ff -> 0x000bf800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 1012637
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 764999 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf27c000 - 00000000bf282000
[ 0.000000] PM: Registered nosave memory: 00000000bf35f000 - 00000000bf371000
[ 0.000000] PM: Registered nosave memory: 00000000bf371000 - 00000000bf3f2000
[ 0.000000] PM: Registered nosave memory: 00000000bf3f2000 - 00000000bf40f000
[ 0.000000] PM: Registered nosave memory: 00000000bf46f000 - 00000000bf668000
[ 0.000000] PM: Registered nosave memory: 00000000bf668000 - 00000000bf6e8000
[ 0.000000] PM: Registered nosave memory: 00000000bf6e8000 - 00000000bf70f000
[ 0.000000] PM: Registered nosave memory: 00000000bf717000 - 00000000bf71f000
[ 0.000000] PM: Registered nosave memory: 00000000bf76c000 - 00000000bf778000
[ 0.000000] PM: Registered nosave memory: 00000000bf778000 - 00000000bf77b000
[ 0.000000] PM: Registered nosave memory: 00000000bf77b000 - 00000000bf78b000
[ 0.000000] PM: Registered nosave memory: 00000000bf78b000 - 00000000bf78c000
[ 0.000000] PM: Registered nosave memory: 00000000bf78c000 - 00000000bf79f000
[ 0.000000] PM: Registered nosave memory: 00000000bf79f000 - 00000000bf7ff000
[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feaff000
[ 0.000000] PM: Registered nosave memory: 00000000feaff000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf000000 s82176 r8192 d24320 u524288
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995159
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/c4fd4a58-2d4c-4805-be6e-ba2a6082d88e ro nologo fastboot quiet console=tty1 splash=silent,theme:arch-black,fadein
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3913576k/5111808k available (3803k kernel code, 1061260k absent, 136972k reserved, 3404k data, 556k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 40632320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2659.762 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5321.17 BogoMIPS (lpj=8865873)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000087] Security Framework initialized
[ 0.000092] AppArmor: AppArmor disabled by boot time parameter
[ 0.000341] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001352] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001814] Mount-cache hash table entries: 256
[ 0.002092] Initializing cgroup subsys ns
[ 0.002094] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.002096] Initializing cgroup subsys cpuacct
[ 0.002119] Initializing cgroup subsys memory
[ 0.002132] Initializing cgroup subsys devices
[ 0.002133] Initializing cgroup subsys freezer
[ 0.002135] Initializing cgroup subsys net_cls
[ 0.002136] Initializing cgroup subsys blkio
[ 0.002173] CPU: Physical Processor ID: 0
[ 0.002173] CPU: Processor Core ID: 0
[ 0.002178] mce: CPU supports 9 MCE banks
[ 0.002186] CPU0: Thermal monitoring enabled (TM1)
[ 0.002193] using mwait in idle threads.
[ 0.002908] ACPI: Core revision 20110112
[ 0.046003] Setting APIC routing to flat
[ 0.046400] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079318] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05
[ 0.184270] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.184275] ... version: 3
[ 0.184276] ... bit width: 48
[ 0.184277] ... generic registers: 4
[ 0.184278] ... value mask: 0000ffffffffffff
[ 0.184279] ... max period: 000000007fffffff
[ 0.184279] ... fixed-purpose events: 3
[ 0.184280] ... event mask: 000000070000000f
[ 0.194351] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.207564] Booting Node 0, Processors #1
[ 0.320658] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.330605] #2
[ 0.443696] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.453626] #3 Ok.
[ 0.566717] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.569973] Brought up 4 CPUs
[ 0.569977] Total of 4 processors activated (21287.06 BogoMIPS).
[ 0.572103] devtmpfs: initialized
[ 0.573048] NET: Registered protocol family 16
[ 0.573151] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.573153] ACPI: bus type pci registered
[ 0.573289] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.573306] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.626058] PCI: Using configuration type 1 for base access
[ 0.626414] bio: create slab <bio-0> at 0
[ 0.627742] ACPI: EC: EC description table is found, configuring boot EC
[ 0.631332] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.722020] ACPI: SSDT 00000000bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.722304] ACPI: Dynamic OEM Table Load:
[ 0.722306] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.722404] ACPI: SSDT 00000000bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.722696] ACPI: Dynamic OEM Table Load:
[ 0.722698] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.743120] ACPI: SSDT 00000000bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.743438] ACPI: Dynamic OEM Table Load:
[ 0.743440] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.752996] ACPI: SSDT 00000000bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.753290] ACPI: Dynamic OEM Table Load:
[ 0.753291] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.764288] ACPI: Interpreter enabled
[ 0.764290] ACPI: (supports S0 S3 S4 S5)
[ 0.764305] ACPI: Using IOAPIC for interrupt routing
[ 0.769164] ACPI: Power Resource [PUBS] (on)
[ 0.772489] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.790239] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.790241] HEST: Table not found.
[ 0.790243] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.790253] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[ 0.790291] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.790309] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.790324] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.790337] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.790349] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.790362] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.790387] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 0.790612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.790654] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.790656] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.790657] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.790659] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.790660] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.790662] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.790669] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.790682] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.790695] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.790715] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.790717] pci 0000:00:01.0: PME# disabled
[ 0.790762] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.790789] pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit]
[ 0.790862] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.790866] pci 0000:00:16.0: PME# disabled
[ 0.790894] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[ 0.790918] pci 0000:00:16.3: reg 10: [io 0x1800-0x1807]
[ 0.790929] pci 0000:00:16.3: reg 14: [mem 0xf2424000-0xf2424fff]
[ 0.791035] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
[ 0.791058] pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff]
[ 0.791069] pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff]
[ 0.791079] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f]
[ 0.791147] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.791151] pci 0000:00:19.0: PME# disabled
[ 0.791180] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.791203] pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff]
[ 0.791289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.791293] pci 0000:00:1a.0: PME# disabled
[ 0.791321] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.791341] pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit]
[ 0.791415] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.791419] pci 0000:00:1b.0: PME# disabled
[ 0.791445] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.791518] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.791523] pci 0000:00:1c.0: PME# disabled
[ 0.791549] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 0.791622] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.791626] pci 0000:00:1c.1: PME# disabled
[ 0.791652] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.791728] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.791732] pci 0000:00:1c.3: PME# disabled
[ 0.791760] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.791836] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.791840] pci 0000:00:1c.4: PME# disabled
[ 0.791876] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.791900] pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff]
[ 0.791986] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.791990] pci 0000:00:1d.0: PME# disabled
[ 0.792013] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.792086] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
[ 0.792199] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
[ 0.792224] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.792235] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.792245] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.792256] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.792266] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f]
[ 0.792276] pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff]
[ 0.792321] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.792325] pci 0000:00:1f.2: PME# disabled
[ 0.792347] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.792367] pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit]
[ 0.792396] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f]
[ 0.792440] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.792466] pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit]
[ 0.792577] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300
[ 0.792588] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff]
[ 0.792600] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.792612] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.792621] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.792629] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.792681] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.792693] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff]
[ 0.792779] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.792781] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.792783] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.792785] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.792841] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.792846] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.792850] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.792857] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.792994] pci 0000:03:00.0: [8086:4239] type 0 class 0x000280
[ 0.793051] pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit]
[ 0.793229] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.793255] pci 0000:03:00.0: PME# disabled
[ 0.793326] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.793331] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.793335] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.793342] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.793396] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.793400] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.793404] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.793411] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.793533] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805
[ 0.793555] pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
[ 0.793687] pci 0000:0d:00.0: supports D1 D2
[ 0.793688] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.793693] pci 0000:0d:00.0: PME# disabled
[ 0.793743] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880
[ 0.793765] pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff]
[ 0.793897] pci 0000:0d:00.1: supports D1 D2
[ 0.793899] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.793904] pci 0000:0d:00.1: PME# disabled
[ 0.793949] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00
[ 0.793971] pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff]
[ 0.794103] pci 0000:0d:00.3: supports D1 D2
[ 0.794104] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.794109] pci 0000:0d:00.3: PME# disabled
[ 0.794175] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.794179] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.794184] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.794190] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.794260] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 0.794264] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.794269] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.794276] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.794278] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.794279] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.794281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.794282] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.794284] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.794285] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.794317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.794387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
[ 0.794408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.794426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.794446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.794466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.794560] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.797337] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797382] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797418] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.797464] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797507] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797549] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797585] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.797629] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.797706] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.797709] vgaarb: loaded
[ 0.797759] PCI: Using ACPI for IRQ routing
[ 0.797761] PCI: pci_cache_line_size set to 64 bytes
[ 0.797850] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.797852] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff
[ 0.797855] reserve RAM buffer: 00000000bf35f000 - 00000000bfffffff
[ 0.797858] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff
[ 0.797861] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff
[ 0.797864] reserve RAM buffer: 00000000bf76c000 - 00000000bfffffff
[ 0.797866] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff
[ 0.797962] NetLabel: Initializing
[ 0.797963] NetLabel: domain hash size = 128
[ 0.797964] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.797975] NetLabel: unlabeled traffic allowed by default
[ 0.797989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.797993] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.800008] Switching to clocksource hpet
[ 0.800954] pnp: PnP ACPI init
[ 0.800967] ACPI: bus type pnp registered
[ 0.801465] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.801466] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.801468] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.801469] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.801470] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.801471] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.801473] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
[ 0.801474] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
[ 0.801475] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.801476] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.801478] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.801479] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.801480] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.801481] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.801482] pnp 00:00: [mem 0x00100000-0xbfffffff]
[ 0.801484] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.801485] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.801536] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.801538] system 00:00: [mem 0x000c0000-0x000c3fff] has been reserved
[ 0.801539] system 00:00: [mem 0x000c4000-0x000c7fff] has been reserved
[ 0.801541] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.801543] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.801544] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.801546] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.801548] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.801550] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.801551] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.801553] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.801555] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.801556] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.801559] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.801560] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.801563] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.801572] pnp 00:01: [bus ff]
[ 0.801603] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.801614] pnp 00:02: [bus 00-fe]
[ 0.801617] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.801619] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.801620] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.801621] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.801623] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.801624] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.801625] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.801626] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.801628] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.801629] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.801630] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.801632] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.801633] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.801634] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.801636] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.801637] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.801638] pnp 00:02: [mem 0xc0000000-0xfebfffff window]
[ 0.801639] pnp 00:02: [mem 0xfed40000-0xfed4bfff window]
[ 0.801669] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.801905] pnp 00:03: [io 0x0010-0x001f]
[ 0.801906] pnp 00:03: [io 0x0090-0x009f]
[ 0.801908] pnp 00:03: [io 0x0024-0x0025]
[ 0.801909] pnp 00:03: [io 0x0028-0x0029]
[ 0.801910] pnp 00:03: [io 0x002c-0x002d]
[ 0.801911] pnp 00:03: [io 0x0030-0x0031]
[ 0.801912] pnp 00:03: [io 0x0034-0x0035]
[ 0.801913] pnp 00:03: [io 0x0038-0x0039]
[ 0.801914] pnp 00:03: [io 0x003c-0x003d]
[ 0.801915] pnp 00:03: [io 0x00a4-0x00a5]
[ 0.801916] pnp 00:03: [io 0x00a8-0x00a9]
[ 0.801917] pnp 00:03: [io 0x00ac-0x00ad]
[ 0.801919] pnp 00:03: [io 0x00b0-0x00b5]
[ 0.801920] pnp 00:03: [io 0x00b8-0x00b9]
[ 0.801921] pnp 00:03: [io 0x00bc-0x00bd]
[ 0.801922] pnp 00:03: [io 0x0050-0x0053]
[ 0.801923] pnp 00:03: [io 0x0072-0x0077]
[ 0.801924] pnp 00:03: [io 0x164e-0x164f]
[ 0.801925] pnp 00:03: [io 0x002e-0x002f]
[ 0.801926] pnp 00:03: [io 0x1000-0x107f]
[ 0.801927] pnp 00:03: [io 0x1180-0x11ff]
[ 0.801928] pnp 00:03: [io 0x0800-0x080f]
[ 0.801930] pnp 00:03: [io 0x15e0-0x15ef]
[ 0.801931] pnp 00:03: [io 0x1600-0x1641]
[ 0.801933] pnp 00:03: [io 0x1644-0x167f]
[ 0.801934] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.801936] pnp 00:03: [mem 0xfeaff000-0xfeafffff]
[ 0.801937] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[ 0.801938] pnp 00:03: [mem 0xfed10000-0xfed13fff]
[ 0.801939] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[ 0.801940] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[ 0.801942] pnp 00:03: [mem 0xfed45000-0xfed4bfff]
[ 0.802000] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.802002] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.802003] system 00:03: [io 0x1180-0x11ff] has been reserved
[ 0.802005] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.802007] system 00:03: [io 0x15e0-0x15ef] has been reserved
[ 0.802008] system 00:03: [io 0x1600-0x1641] has been reserved
[ 0.802010] system 00:03: [io 0x1644-0x167f] could not be reserved
[ 0.802012] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.802014] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved
[ 0.802016] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.802017] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.802019] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.802021] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.802024] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.802027] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.802048] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.802071] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.802077] pnp 00:05: [io 0x0000-0x000f]
[ 0.802079] pnp 00:05: [io 0x0080-0x008f]
[ 0.802080] pnp 00:05: [io 0x00c0-0x00df]
[ 0.802081] pnp 00:05: [dma 4]
[ 0.802102] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.802106] pnp 00:06: [io 0x0061]
[ 0.802128] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.802133] pnp 00:07: [io 0x00f0]
[ 0.802141] pnp 00:07: [irq 13]
[ 0.802162] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.802168] pnp 00:08: [io 0x0070-0x0071]
[ 0.802172] pnp 00:08: [irq 8]
[ 0.802194] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.802199] pnp 00:09: [io 0x0060]
[ 0.802201] pnp 00:09: [io 0x0064]
[ 0.802205] pnp 00:09: [irq 1]
[ 0.802225] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.802234] pnp 00:0a: [irq 12]
[ 0.802257] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
[ 0.802507] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.802532] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.802723] Switched to NOHz mode on CPU #0
[ 0.802766] Switched to NOHz mode on CPU #1
[ 0.802790] Switched to NOHz mode on CPU #2
[ 0.802827] Switched to NOHz mode on CPU #3
[ 0.803136] pnp: PnP ACPI: found 12 devices
[ 0.803138] ACPI: ACPI bus type pnp unregistered
[ 0.809007] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref]
[ 0.809010] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.809011] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.809014] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff]
[ 0.809016] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.809019] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.809020] pci 0000:00:1c.0: bridge window [io disabled]
[ 0.809025] pci 0000:00:1c.0: bridge window [mem disabled]
[ 0.809029] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 0.809036] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.809037] pci 0000:00:1c.1: bridge window [io disabled]
[ 0.809042] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff]
[ 0.809046] pci 0000:00:1c.1: bridge window [mem pref disabled]
[ 0.809053] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.809056] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.809061] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
[ 0.809066] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.809073] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.809074] pci 0000:00:1c.4: bridge window [io disabled]
[ 0.809079] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff]
[ 0.809083] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 0.809089] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 0.809090] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.809096] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.809100] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.809113] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.809115] pci 0000:00:01.0: setting latency timer to 64
[ 0.809122] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.809126] pci 0000:00:1c.0: setting latency timer to 64
[ 0.809133] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.809137] pci 0000:00:1c.1: setting latency timer to 64
[ 0.809144] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.809148] pci 0000:00:1c.3: setting latency timer to 64
[ 0.809154] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.809158] pci 0000:00:1c.4: setting latency timer to 64
[ 0.809166] pci 0000:00:1e.0: setting latency timer to 64
[ 0.809169] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.809171] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.809172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809173] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.809175] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.809176] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.809178] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.809179] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff]
[ 0.809180] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.809182] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff]
[ 0.809183] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.809185] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[ 0.809186] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref]
[ 0.809188] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff]
[ 0.809189] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7]
[ 0.809191] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff]
[ 0.809192] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.809193] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.809195] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.809196] pci_bus 0000:0e: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.809250] NET: Registered protocol family 2
[ 0.809382] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.810140] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.811876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.812095] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.812096] TCP reno registered
[ 0.812105] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.812123] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.812327] NET: Registered protocol family 1
[ 0.812454] pci 0000:01:00.0: Boot video device
[ 0.812477] PCI: CLS 64 bytes, default 64
[ 0.812522] Unpacking initramfs...
[ 0.857049] Freeing initrd memory: 3736k freed
[ 0.857674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.857678] Placing 64MB software IO TLB between ffff8800bb000000 - ffff8800bf000000
[ 0.857679] software IO TLB at phys 0xbb000000 - 0xbf000000
[ 0.857724] Simple Boot Flag at 0x35 set to 0x1
[ 0.858111] audit: initializing netlink socket (disabled)
[ 0.858121] type=2000 audit(1307283181.596:1): initialized
[ 0.858513] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.860249] VFS: Disk quotas dquot_6.5.2
[ 0.860346] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.860468] msgmni has been set to 7651
[ 0.860628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.860658] io scheduler noop registered
[ 0.860660] io scheduler deadline registered
[ 0.860695] io scheduler cfq registered (default)
[ 0.860786] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.860808] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.861983] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90011100000, using 4032k, total 4032k
[ 0.861984] vesafb: mode is 1280x800x32, linelength=5120, pages=0
[ 0.861986] vesafb: scrolling: redraw
[ 0.861987] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.968425] Console: switching to colour frame buffer device 160x50
[ 1.066719] fb0: VESA VGA frame buffer device
[ 1.066729] intel_idle: MWAIT substates: 0x1120
[ 1.066730] intel_idle: v0.4 model 0x25
[ 1.066731] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.066771] ERST: Table is not found!
[ 1.066819] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.269059] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.289528] 0000:00:16.3: ttyS0 at I/O 0x1800 (irq = 17) is a 16550A
[ 1.342184] Linux agpgart interface v0.103
[ 1.342250] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.346699] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.346724] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.346788] mousedev: PS/2 mouse device common for all mice
[ 1.346843] rtc_cmos 00:08: RTC can wake from S4
[ 1.350225] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.368707] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.368742] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.368818] cpuidle: using governor ladder
[ 1.368930] cpuidle: using governor menu
[ 1.369080] TCP cubic registered
[ 1.369082] NET: Registered protocol family 17
[ 1.369089] Registering the dns_resolver key type
[ 1.369166] PM: Hibernation image not present or could not be loaded.
[ 1.369169] registered taskstats version 1
[ 1.369764] rtc_cmos 00:08: setting system clock to 2011-06-05 14:13:03 UTC (1307283183)
[ 1.369887] Initalizing network drop monitor service
[ 1.371869] Freeing unused kernel memory: 556k freed
[ 1.372006] Write protecting the kernel read-only data: 6144k
[ 1.374036] Freeing unused kernel memory: 276k freed
[ 1.379233] Freeing unused kernel memory: 820k freed
[ 1.414655] <30>udevd[108]: starting version 171
[ 1.795803] SCSI subsystem initialized
[ 1.809210] libata version 3.00 loaded.
[ 1.814738] ahci 0000:00:1f.2: version 3.0
[ 1.814756] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.814819] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.814859] ahci: SSS flag set, parallel bus scan disabled
[ 1.814905] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
[ 1.814907] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.814912] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.834923] scsi0 : ahci
[ 1.835114] scsi1 : ahci
[ 1.835275] scsi2 : ahci
[ 1.835441] scsi3 : ahci
[ 1.835597] scsi4 : ahci
[ 1.835756] scsi5 : ahci
[ 1.836192] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41
[ 1.836195] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41
[ 1.836196] ata3: DUMMY
[ 1.836197] ata4: DUMMY
[ 1.836199] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41
[ 1.836202] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41
[ 1.857446] Refined TSC clocksource calibration: 2660.001 MHz.
[ 1.857456] Switching to clocksource tsc
[ 2.153375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.154602] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.154609] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.154838] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.154845] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.155842] ata1.00: ATA-8: HITACHI HTS725032A9A364, PC3ZC70F, max UDMA/100
[ 2.155847] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.157009] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.157015] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.157216] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 2.157222] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.158183] ata1.00: configured for UDMA/100
[ 2.158419] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72503 PC3Z PQ: 0 ANSI: 5
[ 2.475905] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.478447] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.478687] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.480225] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, LT10, max UDMA/66
[ 2.482926] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 2.483159] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 2.484661] ata2.00: configured for UDMA/66
[ 2.486427] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N LT10 PQ: 0 ANSI: 5
[ 2.805075] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.124275] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.138114] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.138157] sd 0:0:0:0: [sda] Write Protect is off
[ 3.138160] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.138177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.140674] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.140675] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.140862] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.181948] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.182662] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.561285] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 5.402659] <30>udevd[721]: starting version 171
[ 5.616621] ACPI: acpi_idle yielding to intel_idle
[ 5.735472] fuse init (API version 7.16)
[ 6.027584] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.027967] ACPI: AC Adapter [AC] (on-line)
[ 6.033128] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 6.035503] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.035505] ACPI: Thermal Zone [THM0] (55 C)
[ 6.041710] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 6.041730] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.041916] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 6.042077] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 6.049877] Non-volatile memory driver v1.3
[ 6.059884] ACPI: Lid Switch [LID]
[ 6.059942] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 6.060605] acpi device:0c: registered as cooling_device4
[ 6.060954] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.060959] ACPI: Battery Slot [BAT0] (battery present)
[ 6.061014] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input3
[ 6.061019] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no)
[ 6.070674] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.070713] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.080171] ACPI: Sleep Button [SLPB]
[ 6.080265] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 6.080270] ACPI: Power Button [PWRF]
[ 6.094462] wmi: Mapper loaded
[ 6.119199] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.120805] iTCO_vendor_support: vendor-support=0
[ 6.255308] usbcore: registered new interface driver usbfs
[ 6.255333] usbcore: registered new interface driver hub
[ 6.255381] usbcore: registered new device driver usb
[ 6.255833] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.255940] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[ 6.256006] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.264694] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.264718] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.264723] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 6.264733] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 6.264753] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.264757] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.264776] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 6.277774] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 6.277776] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 6.279704] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.283605] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 6.283623] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
[ 6.296289] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.296427] hub 1-0:1.0: USB hub found
[ 6.296432] hub 1-0:1.0: 3 ports detected
[ 6.296507] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.296510] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 6.296518] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.296544] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.296547] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.296554] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.304884] sdhci: Secure Digital Host Controller Interface driver
[ 6.304886] sdhci: Copyright(c) Pierre Ossman
[ 6.306021] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 6.306036] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.306060] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6.306067] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 6.306109] Registered led device: mmc0::
[ 6.306154] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 6.316265] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.320131] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 6.320137] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
[ 6.332863] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.332976] hub 2-0:1.0: USB hub found
[ 6.332980] hub 2-0:1.0: 3 ports detected
[ 6.333103] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 6.333112] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.333275] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 6.359105] cfg80211: Calling CRDA to update world regulatory domain
[ 6.408944] WARNING! power/level is deprecated; use power/control instead
[ 6.422229] firewire_ohci 0000:0d:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.422238] firewire_ohci 0000:0d:00.3: setting latency timer to 64
[ 6.426433] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 6.426435] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.426436] thinkpad_acpi: ThinkPad BIOS 6MET84WW (1.44 ), EC 6MHT44WW-1.19
[ 6.426437] thinkpad_acpi: Lenovo ThinkPad T510, model 43492RG
[ 6.427467] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 6.427632] thinkpad_acpi: radio switch found; radios are enabled
[ 6.429394] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.429879] Registered led device: tpacpi::thinklight
[ 6.429909] Registered led device: tpacpi::power
[ 6.429964] Registered led device: tpacpi::standby
[ 6.430024] Registered led device: tpacpi::thinkvantage
[ 6.432085] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 6.432190] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 6.433196] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 6.482754] firewire_ohci 0000:0d:00.3: irq 43 for MSI/MSI-X
[ 6.482808] firewire_ohci: Added fw-ohci device 0000:0d:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 6.512966] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 5c:ff:35:0a:f1:53
[ 6.512970] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.513038] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[ 6.513160] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.523606] tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
[ 6.605540] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 6.690249] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 6.711176] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7
[ 6.717350] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.717428] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.717460] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.720938] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 6.720939] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 6.720992] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.721001] iwlagn 0000:03:00.0: setting latency timer to 64
[ 6.721041] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 6.729127] hub 1-1:1.0: USB hub found
[ 6.729174] hub 1-1:1.0: 6 ports detected
[ 6.737518] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
[ 6.737520] iwlagn 0000:03:00.0: Device SKU: 0Xb
[ 6.737538] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 6.737612] iwlagn 0000:03:00.0: irq 45 for MSI/MSI-X
[ 6.821935] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 6.823671] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.823675] hda_intel: Disable MSI for Nvidia chipset
[ 6.823724] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.838298] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 6.857486] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
[ 6.879747] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.960609] nvidia: module license 'NVIDIA' taints kernel.
[ 6.960613] Disabling lock debugging due to kernel taint
[ 6.965263] hub 2-1:1.0: USB hub found
[ 6.965341] hub 2-1:1.0: 8 ports detected
[ 6.981344] firewire_core: created device fw0: GUID 5cff35ff0af153ff, S400
[ 7.031306] usb 1-1.3: new full speed USB device using ehci_hcd and address 3
[ 7.187532] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[ 7.353763] usb 1-1.6: new high speed USB device using ehci_hcd and address 5
[ 7.513384] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[ 7.645548] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input9
[ 7.645677] generic-usb 0003:046D:C01D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 7.645694] usbcore: registered new interface driver usbhid
[ 7.645695] usbhid: USB HID core driver
[ 7.709967] Linux video capture interface: v2.00
[ 7.719955] Bluetooth: Core ver 2.15
[ 7.720090] NET: Registered protocol family 31
[ 7.720092] Bluetooth: HCI device and connection manager initialized
[ 7.720094] Bluetooth: HCI socket layer initialized
[ 7.725241] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
[ 7.726401] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10
[ 7.726462] usbcore: registered new interface driver uvcvideo
[ 7.726464] USB Video Class driver (v1.0.0)
[ 7.758706] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.758969] usbcore: registered new interface driver btusb
[ 7.779741] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.779747] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 7.779755] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.779763] nvidia 0000:01:00.0: setting latency timer to 64
[ 7.779767] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.779885] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.19 Mon May 16 23:32:08 PDT 2011
[ 8.276265] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 8.463589] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 8.602283] Adding 5276876k swap on /dev/sda2. Priority:-1 extents:1 across:5276876k
[ 11.373150] coretemp coretemp.0: TjMax is 105 C.
[ 11.373202] coretemp coretemp.2: TjMax is 105 C.
[ 11.535629] thinkpad_ec: thinkpad_ec 0.40 loaded.
[ 11.537879] hdaps: initial mode latch is 0x05
[ 11.538022] hdaps: setting ec_rate=250, filter_order=2
[ 11.538240] hdaps: device successfully initialized.
[ 11.538282] input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input11
[ 11.538405] input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input12
[ 11.538480] hdaps: driver successfully loaded.
[ 12.724831] tp_smapi 0.40 loading...
[ 12.725385] tp_smapi successfully loaded (smapi_port=0xb2).
[ 13.850893] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 13.903961] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 15.462951] NET: Registered protocol family 10
[ 15.463466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.463569] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.483544] wlan0: authenticate with 00:04:0e:ed:fd:00 (try 1)
[ 22.485591] wlan0: authenticated
[ 22.529427] wlan0: associate with 00:04:0e:ed:fd:00 (try 1)
[ 22.534940] wlan0: RX AssocResp from 00:04:0e:ed:fd:00 (capab=0x11 status=0 aid=2)
[ 22.534944] wlan0: associated
[ 22.537651] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.636802] padlock_aes: VIA PadLock not detected.
[ 23.420441] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 28.197892] EXT4-fs (sda5): re-mounted. Opts: barrier=1,data=ordered,commit=15
[ 28.203962] EXT4-fs (sda6): re-mounted. Opts: commit=15
[ 33.568008] wlan0: no IPv6 routers present
[ 816.256803] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2026.078172] usb 1-1.4: USB disconnect, address 4
Output of lspci -v
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
Subsystem: Lenovo Device 2193
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-cdefffff
Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Lenovo Device 215f
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f2427800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06) (prog-if 02 [16550])
Subsystem: Lenovo Device 2162
Flags: 66MHz, fast devsel, IRQ 17
I/O ports at 1800 [size=8]
Memory at f2424000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
Subsystem: Lenovo Device 2153
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at f2400000 (32-bit, non-prefetchable) [size=128K]
Memory at f2425000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Lenovo Device 2163
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f2428000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Lenovo Device 215e
Flags: bus master, fast devsel, latency 0, IRQ 44
Memory at f2420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
MemoSort of solved...
NOTE!
While almost all new ThinkPads have integrated Intel HD Graphics, on those ThinkPads with a Descrete NVIDIA GPU, the Intel GPU is disabled and cannot be enabled. There is no support for Switchable Graphics.
NOTE!
Contrary to the statement above, you can select the GPU in the BIOS of recent models with Nvidia Optimus, e.g. the T510 4384GEG. Windows seems to be able to switch between the GPUs, too.
http://www.thinkwiki.org/wiki/Intel_HD_Graphics
I guess there is no way getting this to work, unless Lenovo unlocks this feature via BIOS-update.
Greetings -
Temperature Reading for Thinkpad T510 Usage
Hi All,
I got a question regarding the standard / acceptable temperature operating range for the thinkpad t510 laptops. So my setup currently is my t510 is connected to an external monitor, external speakers, external keyboard and mouse. So it is essentially a desktop except using the innerds of the laptop as the "heart" of the system. My power manager has set the cpu to be adaptive. The temperature readings I am getting for the CPU and the Motherboard from downloading the program called Speccy from Piriform are at an average of 60 and 61 degrees C. I am wondering if that is within normal operating temperature for the laptop and if it is acceptable. Or is this temperature not ok and the reason why it is so high is that I am using the externals. Also, I am not even using heavy load work for the laptop besides for web browsing and listening to music and working on documents / spread sheet so basically office work.
And lastly, would the temperature problem be solved if in the future I would to get a w530 laptop since those laptops are more "powerful"?? Or is that wrong and the temperature is normal.
Thanks in advance for answers
Solved!
Go to Solution.unit88888888 wrote:
Is it because of the confined space or is it because the cpu is i7??
Either or both, It also depends on what you're doing with the T510. If the CPU is running hard that will definitely raise the temperature compared to idle/light load.
Make sure the fan air exhaust (and intake if the T510 has one) grilles aren't obstructed. Leave a few inches to let air circulate.
Also consider:
1. Place plastic or wood spacers below the unit to raise it an inch or so above the desktop.
2. Use a USB-powered notebook fan base/pad to circulate air beneath the unit.
Neither will make a huge improvement but they'll both help.
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30 -
How do i disable mouse button 4 and 5 to open new tabs or windows?
Okay so I got myself a new mouse, its a logitech G700s mouse but I don't think that matters anyway.
The problem is that the extra buttons on the mouse (small buttons on the side) i have are assigned as "mouse button 4" and "mouse button 5". Now to a standart mac system these buttons are assigned to open a new window or a new tab in safari but when I customly set these buttons to something else it does both of those things. For example i sat the mouse button 5 to mission control (show all windows) but now if I am using safari it also opens something in a new page if I am holding the cursor on a link.
I just want to know how I can remove that function. To make the mouse button 5 and 4 do nothing.
The system I use to customise the mouse buttons are a separate program. I need to know how to disable this new page function in the mac software.
Sincerly Thomas.Okay so I got myself a new mouse, its a logitech G700s mouse but I don't think that matters anyway.
The problem is that the extra buttons on the mouse (small buttons on the side) i have are assigned as "mouse button 4" and "mouse button 5". Now to a standart mac system these buttons are assigned to open a new window or a new tab in safari but when I customly set these buttons to something else it does both of those things. For example i sat the mouse button 5 to mission control (show all windows) but now if I am using safari it also opens something in a new page if I am holding the cursor on a link.
I just want to know how I can remove that function. To make the mouse button 5 and 4 do nothing.
The system I use to customise the mouse buttons are a separate program. I need to know how to disable this new page function in the mac software.
Sincerly Thomas. -
Auto-scoll (middle mouse button) gone/not working in Firefox 20/Windows 7 64-bit?
duplicate of [/questions/956896]
I recently upgraded both my work PC and my home PC to Firefox 20.0.1. My work PC (Win XP 32-bit) works fine, but my home PC (Win 7 64-bit) no longer allows me to auto-scroll when I click the middle mouse button (it does nothing). I have tried restarting Firefox with all addons disabled, as well as a totally fresh install, but haven't had any luck. To clarify, the mouse wheel itself still works as it should, it's just clicking it in to auto-scroll that's the problem.
Has anyone else experienced this?
##EDIT##
Please delete this (double post)Did you check the setting?
*Tools > Options > Advanced > General: Browsing: "Use autoscrolling"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Auto-scoll (middle mouse button) gone in Firefox 20/Windows 7 64-bit
I recently upgraded both my work PC and my home PC to Firefox 20.0.1. My work PC (Win XP 32-bit) works fine, but my home PC (Win 7 64-bit) no longer allows me to auto-scroll when I click the middle mouse button (it does nothing). I have tried restarting Firefox with all addons disabled, as well as a totally fresh install, but haven't had any luck. To clarify, the mouse wheel itself still works as it should, it's just clicking it in to auto-scroll that's the problem. I have confirmed that 'Use Autoscrolling' is set under Options>Advanced on both computers.
Has anyone else experienced this?Did you check the setting?
*Tools > Options > Advanced > General: Browsing: "Use autoscrolling"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Maybe you are looking for
-
Is an AMD Athlon 64 3200+ compatible with windows 8.1 64bit?
I have an older build with an AMD Athlon 64 3200+ processor. I have been reading about Win 8.1 64 bit compatibility issues regarding certain AMD processors. My question is... Looking at my system information under processor, it shows "cx16 CMPXCHG
-
What is Tcode for purchase order and purchse requisition.
HI all What is Tcode for purchase order and purchse requisition. Thanks
-
Hi people, I just finished testing FMS4 and Cirrus public servers with simple multicast broadcast-receive application. It works, but quality (frankly) sucks big time in both FMS4 and CIrrus. I played with all i(un)maginable options with setQuality/se
-
I'm having trouble connecting my PS3 on my Wi-Fi. It can not read my IP Adress?
I can not get my PS3 to connect with my Wi-Fi. The PS3 can not read my IP adress on my Airport express. Please help Thank you
-
Oracle 11G Linux ( Oracle Database Gateway for SQL Server 11.1.0.6.0. )
Hi, I am tring Gateway for SQL Server .. I want to Select Oracle Database Gateway for SQL Server 11.1.0.6.0 at the time of installation, but It is not coming in the Avaliable Components List.. Is there any prerequisite for SQL server ? Any Help pleas