ThinkPad T61 7664-1KU - cpu upgrade T7500 to T9500 - possible?

HeLLo there.
I'm wondering if there is possibilty to upgrade my T61 cpu from T7500 to T9500.
On this site: http://ark.intel.com/ProductCollection.aspx?familyId=26548 we can find all information about those CPUs.
Both have the same FSB 800 MHz but T7500 is a Merom and T9500 is a Penryn. I'm wondering if there will be no problem with the upgrade?
I have upgraded my RAM to Kingston HyperX 2x2GB PC2-5300 CL4 and everything works fine. In the future I plan to upgrade a HDD to SDD because now the price is to high for me.
THX for all help and tips.
Moderator Note; s/n removed for members own protection
T400 2768-CT7
C2D P9600, 2x 4GB Kingston 1066MHz, 256MB 3470HD (1440x900), FUJITSU MHZ2160BJ G1 + HITACHI HTS541616J9SA00 (ultrabay), 5100AGN, BT
T61 7664-1KU (died cause nVidia GPU fail)

barcode lable: TYPE 7663-13U S/N L3-G3??2 07/09 (question mark used to replace numerical numbers)
I tried every possibilities on the link but lenovo keeps "apologizing" "Auto-Detect Warranty" neither in IE9 with lowest security settings and ActiveX enabled
My system was Vista Business, C2D T7500, 1G 667 MHz, NVS 140M (14.1" 1440x900)
(currently upgraded to 64bitWin7 + 4GB DDR800 + 60G Vertex2 SSD)
(P.S I guess there still no official BIOS update to unleash SATA2 ability?)
T61 (766313U)
T7500, 4G ram, 60G SSD
hoping to upgrade to T9500...

Similar Messages

T61 6463-4YG CPU upgrade

Hi friends,
I plan to upgrade the CPU !!!
what is possible?
i consider T7700 or T7800
is that ok?
br.
Steen

they are both okay, but i think you can get a T8xxx or T9xxx with FSB of 800 mhz, these run faster and cooler than the T7xxx Merom CPU.
But if you are going to run the T9xxx or T8xxx CPU, you would have to apply a modified bios firmware.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Upgrading Thinkpad W520 CPU and RAID is it possible.

Hello, I have Thinkpad W520. I'm interested two things. First is CPU upgrade. Which is highest CPU for this model? And Can I upgrade to 3rd generation CPU? As I see Ivy Bridge CPU use same socket. Second is RAID. I havent RAID option on my laptop. Is it possible to add this option?And last question I have warranty. Is it possible throught warranty upgrade CPU and setup RAID? Of course not for free.
Solved!
Go to Solution.

AFAIK, you can only upgrade within the Sandy Bridge generation. RAID is integral to the motherboard (you'd have to replace the motherboard with one that has RAID).
I don't think warranty does upgrades.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Dell Precision T7500 E5645 CPU Upgrade?

Sid Phiilips wrote:
I think I'd do the SSD and the RAM first and see how it goes. What is he running for a graphics card?
Thanks for the quickly reply, we recently installed a NVIDIA Quadro K4200.

We have a Dell Precision T7500 with 2 x Intel Xeon E5645 2.40GHz
The computer is being used for CAD work and rendering, the user complains the computer is slow which it is compared to the rest of the computers in our studio. I've been told I can't replace it yet but can upgrade it.
I was wondering what would be the best CPU upgrade to do for CAD work?
Have run CPUID and can see it has Socket 1366 LGA, I'm unsure sure if I should be looking at an E or X series processor though.
Other upgrades I'm planning to do to the computer.
Have set aside a Samsung 850 Pro SSD we have spare to rebuild the OS onto.
Going to remove mismatched RAM modules and install 2 x Crucial 16GB DDR3 PC3-12800 Registered ECC 1.35V 2048Meg x 72
This topic first appeared in the Spiceworks Community

Upgrade Thinkpad T61

Hi,
I would like to upgrade my Processor and Video card of my Thinkpad T61.
It’s a 7665, It got now a Intel Centrino 2,0GHz processor and a nVidea nvs 140ms video card. I would like to have a min of 2,5GHz and a 256mb onboard 3D (preferred 512mb) or can't you remove the parts?
Thanks in advance,
Kyoshin

You can either upgrade your ram now or later it doesn't matter, but before you decide to jump on to the 64 bit bandwagon, please remember that some softwares don't have native 64 bit support in which case they won't work.
Also, if i am you then i would wait to next year to upgrade the OS, use the 32 bit Vista now, because Microsoft is abandonding their Vista OS (relatively speaking) and is going to release Windows 7 next year to lure people away from Win XP. So don't waste any more money on Vista, and just wait for the new OS to come out.
But getting 2 x 2 gig of ram is not going to hurt you, because the price of PC 5300 SO DIMM ram has pretty much bottomed out, any price change is minor and mostly will be result of different currency exchange rate. In Australia Ram price actually went up due to Weak Australian Dollar against every major foreign currency.

Thinkpad T61 kernel panics

I'm having some trouble with random kernel panics on a thinkpad T61. Sometimes they occur just after boot yet other times I can be using my laptop for hours with absolutely no problems before it decides to panic. I've attached a picture of the error message I get and the output of some commands I thought would be relevant.
My /etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
MOD_AUTOLOAD="yes"
MODULES=(e1000e snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
USELVM="no"
# NETWORKING
# Should also be put in /etc/hosts
HOSTNAME="alasdair-laptop"
NETWORKS=(ethernet gp)
# DAEMONS
DAEMONS=(syslog-ng acpid @net-profiles netfs crond @alsa)
Here's my dmesg, taken just after booting.
Linux version 2.6.25-ARCH (root@workstation64) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007deb0000 (usable)
BIOS-e820: 000000007deb0000 - 000000007decc000 (ACPI data)
BIOS-e820: 000000007decc000 - 000000007df00000 (ACPI NVS)
BIOS-e820: 000000007df00000 - 000000007e000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
1118MB HIGHMEM available.
896MB LOWMEM available.
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f6900] 000f6900
Entering add_active_range(0, 0, 515760) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 515760
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 515760
On node 0 totalpages: 515760
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2237 pages used for memmap
HighMem zone: 284147 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F68D0, 0024 (r2 LENOVO)
ACPI: XSDT 7DEBB77F, 0094 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: FACP 7DEBB900, 00F4 (r3 LENOVO TP-7L 2170 LNVO 1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT 7DEBBD1D, FED1 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: FACS 7DEE4000, 0040
ACPI: SSDT 7DEBBAB4, 0269 (r1 LENOVO TP-7L 2170 MSFT 3000000)
ACPI: ECDT 7DECBBEE, 0052 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: TCPA 7DECBC40, 0032 (r2 LENOVO TP-7L 2170 LNVO 1)
ACPI: APIC 7DECBC72, 0068 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: MCFG 7DECBCDA, 003C (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: HPET 7DECBD16, 0038 (r1 LENOVO TP-7L 2170 LNVO 1)
ACPI: SLIC 7DECBDF0, 0176 (r1 LENOVO TP-7L 2170 LTP 0)
ACPI: BOOT 7DECBF66, 0028 (r1 LENOVO TP-7L 2170 LTP 1)
ACPI: ASF! 7DECBF8E, 0072 (r16 LENOVO TP-7L 2170 PTL 1)
ACPI: SSDT 7DEE26D9, 025F (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2938, 00A6 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE29DE, 04F7 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: SSDT 7DEE2ED5, 01D8 (r1 LENOVO TP-7L 2170 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad T61
ACPI: Added _OSI(Linux)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 511731
Kernel command line: root=/dev/disk/by-uuid/bf262041-d9e8-494d-becc-808ef613eef2 ro
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2094.737 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2040240k/2063040k available (2083k kernel code, 21556k reserved, 711k data, 268k init, 1145536k highmem)
virtual kernel memory layout:
fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03c1000 - 0xc0404000 ( 268 kB)
.data : 0xc0308fe8 - 0xc03baea0 ( 711 kB)
.text : 0xc0100000 - 0xc0308fe8 (2083 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
hpet clockevent registered
Calibrating delay using timer specific routine.. 4197.54 BogoMIPS (lpj=6992869)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20070126
ACPI: Checking initramfs for custom DSDT
CPU0: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Booting processor 1/1 ip 4000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4191.12 BogoMIPS (lpj=6982598)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz stepping 06
Total of 2 processors activated (8388.66 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 1229046 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to: check_tsc_sync_source failed.
Brought up 2 CPUs
net_namespace: 548 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0x0-0x0 could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff has been reserved
system 00:00: iomem range 0xe4000-0xe7fff has been reserved
system 00:00: iomem range 0xe8000-0xebfff has been reserved
system 00:00: iomem range 0xec000-0xeffff has been reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
system 00:02: ioport range 0x164e-0x164f has been reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x800-0x80f has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x165f could not be reserved
system 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 2000-2fff
MEM window: 0xd4000000-0xd6ffffff
PREFETCH window: 0x00000000e0000000-0x00000000efffffff
PCI: Bridge: 0000:00:1c.0
IO window: 3000-3fff
MEM window: 0xfc000000-0xfdffffff
PREFETCH window: 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
IO window: 4000-4fff
MEM window: 0xdc100000-0xdf2fffff
PREFETCH window: 0x00000000dfd00000-0x00000000dfdfffff
PCI: Bridge: 0000:00:1c.2
IO window: 5000-5fff
MEM window: 0xd8000000-0xd9ffffff
PREFETCH window: 0x00000000dfa00000-0x00000000dfafffff
PCI: Bridge: 0000:00:1c.3
IO window: 6000-6fff
MEM window: 0xd0000000-0xd1ffffff
PREFETCH window: 0x00000000df700000-0x00000000df7fffff
PCI: Bridge: 0000:00:1c.4
IO window: 7000-7fff
MEM window: 0xcc000000-0xcdffffff
PREFETCH window: 0x00000000df400000-0x00000000df4fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
IO window: 0x00008000-0x000080ff
IO window: 0x00008400-0x000084ff
PREFETCH window: 0xf4000000-0xf7ffffff
MEM window: 0x80000000-0x83ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 8000-bfff
MEM window: 0xf8100000-0xfbffffff
PREFETCH window: 0x00000000f4000000-0x00000000f7ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1c.4 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 554k freed
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 268k freed
ACPI: ACPI Dock Station Driver
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ACPI: PCI interrupt for device 0000:00:1f.1 disabled
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 16
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1600BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 08.0 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.12
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
ata4.00: ATAPI: Optiarc DVD RW AD-7910A, 1.D1, max UDMA/33
ata4.00: configured for UDMA/33
ata5: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7910A 1.D1 PQ: 0 ANSI: 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:19.0 to 64
eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:37:d6:46:39
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 4, PHY: 6, PBA No: 1008ff-0ff
ACPI: PCI Interrupt 0000:00:1b.0[b] -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT 7DEE1B32, 02C4 (r1 PmRef Cpu0Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1E7B, 085E (r1 PmRef Cpu0Cst 100 INTL 20050513)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7DEE1A6A, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
ACPI: SSDT 7DEE1DF6, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THM0] (52 C)
ACPI: LNXTHERM:02 is registered as thermal_zone1
ACPI: Thermal Zone [THM1] (42 C)
Non-volatile memory driver v1.2
thinkpad_acpi: ThinkPad ACPI Extras v0.19
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7LETB7WW (2.17 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad T61
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
input: ThinkPad Extra Buttons as /class/input/input5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: WMI: Mapper loaded
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: found ejectable bay
ACPI: \_SB_.PCI0.IDE0.PRIM.MSTR: Adding notify handler
ACPI: Error installing bay notify handler
ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.MSTR] Added
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: device:03 is registered as cooling_device2
input: Video Bus as /class/input/input6
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: device:08 is registered as cooling_device3
input: Video Bus as /class/input/input7
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000
iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23k
iwl4965: Copyright(c) 2003-2007 Intel Corporation
usb 3-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 3-0:1.0: unable to enumerate USB device on port 1
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.0 to 64
iwl4965: Detected Intel Wireless WiFi Link 4965AGN
iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
phy0: Selected rate control algorithm 'iwl-4965-rs'
hub 6-0:1.0: unable to enumerate USB device on port 2
usb 1-2: USB disconnect, address 2
input: PC Speaker as /class/input/input8
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
ACPI: PCI interrupt for device 0000:03:00.0 disabled
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:15:00.1[b] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:15:00.1 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8101000-f81017ff] Max Packet=[2048] IR/IT contexts=[4/4]
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
usb 7-1: new high speed USB device using ehci_hcd and address 2
Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff
cs: IO port probe 0x8000-0xbfff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8100000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04791/0x300000
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input9
usb 7-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Monitor-Mwait will be used to enter C-3 state
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a26dd3a]
EXT3 FS on sda3, internal journal
Adding 891596k swap on /dev/sda4. Priority:-1 extents:1 across:891596k
Clocksource tsc unstable (delta = -297926941 ns)
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 40100102, writing 40100106)
scsi 5:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input10
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: authenticate with AP 00:1f:5b:88:6f:1f
wlan0: RX authentication from 00:1f:5b:88:6f:1f (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:1f:5b:88:6f:1f
wlan0: RX AssocResp from 00:1f:5b:88:6f:1f (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:1f:5b:88:6f:1f)
wlan0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
padlock: VIA PadLock not detected.
FAT: invalid media value (0xb9)
VFS: Can't find a valid FAT filesystem on dev sdb.
usb 7-1: USB disconnect, address 2
usb 7-2: new high speed USB device using ehci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 6:0:0:0: Direct-Access S31B0806 USB DISK 1100 PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 2030592 512-byte hardware sectors (1040 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
lsmod
Module Size Used by
nls_cp437 5888 1
vfat 10880 1
fat 45984 1 vfat
aes_i586 8064 1
aes_generic 27432 1 aes_i586
usb_storage 84800 1
joydev 10048 0
pcmcia 33068 0
firewire_ohci 16512 0
firewire_core 36928 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
arc4 2176 2
ecb 3072 2
ohci1394 28720 0
serio_raw 5508 0
yenta_socket 23436 1
rsrc_nonstatic 11264 1 yenta_socket
ieee1394 79288 1 ohci1394
pcmcia_core 33300 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 2816 0
psmouse 36752 0
i2c_i801 9232 0
i2c_core 19348 1 i2c_i801
iwl4965 101748 0
mac80211 130572 1 iwl4965
cfg80211 16392 1 mac80211
video 16656 0
output 3200 1 video
ehci_hcd 33932 0
bay 4736 0
wmi 6056 0
uhci_hcd 22288 0
usbcore 129904 4 usb_storage,ehci_hcd,uhci_hcd
intel_agp 23740 0
agpgart 28244 1 intel_agp
sg 27188 0
thinkpad_acpi 53624 0
nvram 7436 1 thinkpad_acpi
thermal 15260 0
processor 32096 3 thermal
evdev 9472 0
fan 4356 0
button 6416 0
battery 10372 0
ac 4484 0
snd_seq_oss 30336 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 48560 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_hda_intel 336440 0
snd_hwdep 7428 1 snd_hda_intel
snd_pcm_oss 38656 0
snd_pcm 68228 2 snd_hda_intel,snd_pcm_oss
snd_timer 19848 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14848 1 snd_pcm_oss
snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6496 1 snd
e1000e 90916 0
rtc_cmos 9120 0
rtc_core 15516 1 rtc_cmos
rtc_lib 2944 1 rtc_core
ext3 124040 1
jbd 44052 1 ext3
mbcache 7172 1 ext3
sd_mod 23320 5
sr_mod 15300 0
cdrom 34080 1 sr_mod
ata_piix 17668 0
ahci 25224 2
ata_generic 5636 0
pata_acpi 4992 0
libata 142224 4 ata_piix,ahci,ata_generic,pata_acpi
scsi_mod 92332 5 usb_storage,sg,sd_mod,sr_mod,libata
dock 7952 2 bay,libata
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HBM (ICH8M-E) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1)
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)

Sorry to ressurect an old thread, but recently I've been getting random kernel panics on my t61 as well. I believe the root cause is the wireless card. I have an intel 4965 card just like you.

Lenovo ThinkPad T61 14,1" LCD problem

Hi, LCD in my T61 14,1" with nVidia graphics (T61 7664-18G) has failed - I attached an image. External LCD is 100% OK, just internal have this problem (like image in fog, bad readable). I try to replace LCD - problem is still there. What can be the solution? LCD cable, invertor, or it is a nVidia problem (but really just internal LCD problem)? Thanks for help.
Internal LCD (like in fog, no readable text - or very bad):
Link to picture
External LCD (vertical lines just in photo, everything is 100% OK):
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

xsuchy09 wrote:
Buy new/used mainboard with integrated Intel graphics (external display in dock width 1920x1200 will not be problem, second display with same resolution will be ok with intel graphic too I think, or?)? Buy another T61/T400 with Intel graphics (because of compatibility and old style keyboard) It is used only for programming, I think that I don't need graphics performance ... Are parts from T61 with nVidia graphics full compatible with parts with Intel graphics (when I will go this way I will have some replacement parts )? Or is it compatible T61 14,1" and T400 in main parts? What will be the best choice? Performance of T61 is sufficient for development of web applications etc.
If you don't need graphic performance and the T61 performance is enough for you I would buy an Intel T61 planar and replace the Nvidia one. RAM and CPU are compatible, but you will need an integrated heatsink since it's different than the discrete one you have now. I can't comment about driving two monitors, I guess you now use both VGA and DVI ports, right?
You can also re-use your hard drive or SSD and WLAN card.
If you go the T400 way (or even T410, it also has a non chiclet keyboard) you will be able to reuse the hard drive/ssd. RAM is not compatible! (DDR3 instead of DDR2)
Hope this helps!
Cheers
/L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
Comunidad en Español English Community Deutsche Community Русскоязычное Сообщество

Lenovo N200 B9G CPU upgrade?

I have a N200 B9G with a Celeron 530. The chipset is GM965 according to the Intel Chipset Identification Utility. Is it possible to upgrade the CPU to a T8100 or T8300? I get conflicting reports when searching.

hi Kruskakli,
Welcome to Lenvo Community Forums!
Your Chipset Supports the Processor you want.
Here's the reference
Chipset Compatible CPU
http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller#@compatibility
But as per the Motherboard it will be limited to this list
CPU assembly, Intel Celeron M processor 540 (1.86 GHz)
CPU assembly, Intel Core 2 Duo processor T7100 (1.83 GHz)
CPU assembly, Intel Core 2 Duo processor T7300 (2.0 GHz)
CPU assembly, Intel Core 2 Duo processor T7500 (2.2 GHz)
This list can be checked with your system's maintenance Manual
http://download.lenovo.com/pccbbs/mobiles_pdf/42x3552_02.pdf
Putting a Chipset Compatible CPU but not Mainboard compatible may end up like this Thread
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/G500-cpu-upgrade/td-p/1297039
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

L520 Cpu Upgrade

Hello, i have a Lenovo thinkpad L520 and i'm looking forward to upgrade the cpu (Pentium B960, Intel HM65 mobo). I have some questions regarding this:
Is the Intel core i7 2630QM the top processor that i can go with, or could i try something like i7 2760QM, i7 2860QM or any other similar quad core processor with same TDP 45W, same socket, same stepping? (I suppose 3rd generation cpu's are not compatible, right?)
Is the Turbo Boost feature on these cpu's going to be fully functional?
BIOS Version: 1.23 (8GET46WW)
Links: Intel Core i7 2760QM
Intel Core i7 2860QM
Intel Pentium B960
Solved!
Go to Solution.

Hi Scha,
Welcome to Lenovo Community!
As per your query we understood that you are looking for CPU up-gradation on ThinkPad L520.
You can upgrade the CPU to Intel core i7 2630QM, for detailed specification on all compatible hardware you can visit the below link.
DETAILED SPECIFICATIONS - THINKPAD L520
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

AMD Athlon 64 3800+ cpu upgrade to AMD Athlon 64 X2

Hello everyone,
First of all, I have been to cpu-upgrade.com and typed in my current (CPU)--> AMD Athlon 64 3800+ 2.40GHz (motherboard)--> ASUS A8M2N-LA (Naos) GL6.
According to the website, my AM2 Socket (940pin) is capable of upgrading to a Dual Core, Anyone know if that site is accurate or not? Any help would be nice. I need to get away from this single core.
1) Some CPU models require a BIOS upgrade, which a BIOS upgrade for this board is not available.
2) A lot of X2 Dual Cores work either using a 4400+, 4600+, and so on....
I do have a 550watt PSU installed, also I am using MSI Nvidia GeForce GT620 PCI-express 16x graphics, not using onboard.
I have read that some BIOS' upgrades terminate the onboard video, is that true? Basically, whatever I already have installed is current and up to date with all video/sound drivers, etc... If anybody very knowledgable knows for sure if an AMD Athlon 64 X2 will work in my system that would be nice. My specs below......
OS: Windows Vista Home Basic (32bit)
CPU: AMD Athlon 64 3800+ 2.40GHz
RAM: 2GB (GDDR2)
PSU: 550watt (all 20+4 for main cable to motherboard connected using all 24 pins + 4pin connector for CPU? I believe.
Sound: Realtek HD ALC888 High Definition Audio
Video: MSI Nvidia GeForce GT620 (GDDR3 with 2GB Video Memory).
Only thing I am bottle necking on is the CPU, and I would love to upgrade to Dual Core, once again, thank you for the help.

Hello @bigsnake,
I understand you are looking to upgrade your processor on your Compaq Presario Media Center SR2013WM Desktop PC. I am providing you with a link to a CPU-Upgrade thread concerning your very question ASUS A8M2N-LA CPU compatibility list. Now this is the only information I have been able to find concerning a processor upgrade for your Compaq Presario Media Center SR2013WM Desktop PC.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

CPU upgrade on Satellite L30-101

Hi, I have a Toshiba Satellite L30-101. I've upgraded the RAM successfully to 2GB (2x 1GB) but I'm finding it incredibly hard to get information on processor replacements.
The laptop has the latest BIOS on it (3.10-WIN - 19/02/08) but when trying to find information regarding whats in it I'm hitting brick walls. Firstly the site > http://www.toshiba-tro.de/biosinfo/ < doesn't have my laptop on it,
Product Type: Notebook
Family: Satellite
Product Series: Satellite L Series
Model: ? unknown
Short Model No: ? unknown
I did hope I could stick an Intel Duo in but with the ATI chipset, I'm pretty sure it wont work but again without knowing whats within BIOS, compatible.. I'm lost. The only processor I can find which may work, same package, FSB, socket is an Intel Core Solo Processor T1350 which kicks out 1.86 GHz, not a massive difference and I'm sure it can't be the only replacement option.
Could someone and staff please help me with getting hold of BIOS info and compatible processors for my laptop. The current Intel Celeron M Processor 410 kicking out 1.46 GHz isn't good enough for Vista (cert on laptop) and basic multi tasking. Its lagging way too much even after a good tune up, ram upgrade, HD upgrade to 7200RPM. I'm in need of a processor upgrade but as mention finding it incredibly hard to obtain information of which would be compatible.
Sincerely,
Gourcuff

Hello
In my opinion your attempt to replace CPU is wrong. Why? Satellite L30 is not designed to offer some fabulous performance and it is designed for everyday usage. Best evidence for this was the price. It was not so expensive.
Can you please tell us why do you want to have new CPU? Do you use some special software?
Back to CPU replacement. As you probably know mobile computers have limited upgrade options and it is related to RAM and HDD upgrade. It is definitely unprovided for CPU upgrade and it is not supported. Specific design, especially cooling system is designed for certain CPU.
Due to all this you will not be able to find any relevant info about CPU replacement.
Check please this Toshiba document - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

Is CPU upgrade on Satellite 2410-303 possible?

My Satellite 2410-303 has Pentium 4 Mobile 1.7GHZ processor. I want to upgrade its processor to Pentium 4 Mobile 2.8GHZ. I think that it is possible because its upper models have faster processor and that is unique difference between them.
Please, help me for this question and tell me is it possible?

Hello
You will be very lucky if someone has so good experiences with CPU upgrade on Satellite 2410 but on this forum you can find very nice comments about that. I have founded just two of them but very interesting. Check it out!
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=87488
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=59708
Bye

Thinkpad T61 reports in-correct EDID data to Xorg

Thinkpad T61 with Quadro NVS 140M reports in-correct EDID data . Primary issues is that I want to switch to "1024x768" resolution which is well supported for LCD projectors. But currently with default setting nvidia driver it gives only the following resolutions. Is there any BIOS update for this ??
root#xrandr
Screen 0: minimum 640 x 480, current 1680 x 1050, maximum 1680 x 1050
default connected 1680x1050+0+0 0mm x 0mm
   1680x1050      50.0*    51.0     52.0
   1600x1024      53.0
   1280x1024      54.0
   1280x960       55.0
   800x512        56.0
   640x512        57.0
   640x480        58.0
Here is the snip of Xorg.0.log
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86GL) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.3e.00.00
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
(--) NVIDIA(0):     IBM (DFP-0)
(--) NVIDIA(0): IBM (DFP-0): 330.0 MHz maximum pixel clock
(--) NVIDIA(0): IBM (DFP-0): Internal Dual Link LVDS
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     HorizSync range (53.398-64.075 kHz) would exclude this
(WW) NVIDIA(0):     mode's HorizSync (42.7 kHz); ignoring HorizSync check for
(WW) NVIDIA(0):     mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     VertRefresh range (50.000-60.000 Hz) would exclude this
(WW) NVIDIA(0):     mode's VertRefresh (40.1 Hz); ignoring VertRefresh check
(WW) NVIDIA(0):     for mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     HorizSync range (53.398-64.075 kHz) would exclude this
(WW) NVIDIA(0):     mode's HorizSync (42.7 kHz); ignoring HorizSync check for
(WW) NVIDIA(0):     mode "1680x1050".
(WW) NVIDIA(0): The EDID for IBM (DFP-0) contradicts itself: mode "1680x1050"
(WW) NVIDIA(0):     is specified in the EDID; however, the EDID's valid
(WW) NVIDIA(0):     VertRefresh range (50.000-60.000 Hz) would exclude this
(WW) NVIDIA(0):     mode's VertRefresh (40.1 Hz); ignoring VertRefresh check
(WW) NVIDIA(0):     for mode "1680x1050".
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "default"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(0):     "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
(--) NVIDIA(0): DPI set to (129, 127); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0xf8102400 - 0xf81024ff (0x100) MX[B]
   [5] -1   0   0xf8102000 - 0xf81020ff (0x100) MX[B]
   [6] -1   0   0xf8101c00 - 0xf8101cff (0x100) MX[B]
   [7] -1   0   0xf8101800 - 0xf81018ff (0x100) MX[B]
   [8] -1   0   0xf8101000 - 0xf81017ff (0x800) MX[B]
   [9] -1   0   0xdf2fe000 - 0xdf2fffff (0x2000) MX[B]
   [10] -1   0   0xfe227400 - 0xfe2274ff (0x100) MX[B]
   [11] -1   0   0xfe226000 - 0xfe2267ff (0x800) MX[B]
   [12] -1   0   0xfe227000 - 0xfe2273ff (0x400) MX[B]
   [13] -1   0   0xfe220000 - 0xfe223fff (0x4000) MX[B]
   [14] -1   0   0xfe226c00 - 0xfe226fff (0x400) MX[B]
   [15] -1   0   0xfe225000 - 0xfe225fff (0x1000) MX[B]
   [16] -1   0   0xfe200000 - 0xfe21ffff (0x20000) MX[B]
   [17] -1   0   0xd4000000 - 0xd5ffffff (0x2000000) MX[B](B)
   [18] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
   [19] -1   0   0xd6000000 - 0xd6ffffff (0x1000000) MX[B](B)
   [20] 0   0   0x000a0000 - 0x000affff (0x10000) MS[B]
   [21] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS[B]
   [22] 0   0   0x000b8000 - 0x000bffff (0x8000) MS[B]
   [23] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [24] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [25] -1   0   0x00001c60 - 0x00001c7f (0x20) IX[B]
   [26] -1   0   0x00001c20 - 0x00001c3f (0x20) IX[B]
   [27] -1   0   0x00001c18 - 0x00001c1b (0x4) IX[B]
   [28] -1   0   0x00001c40 - 0x00001c47 (0x8) IX[B]
   [29] -1   0   0x00001c1c - 0x00001c1f (0x4) IX[B]
   [30] -1   0   0x00001c48 - 0x00001c4f (0x8) IX[B]
   [31] -1   0   0x00001830 - 0x0000183f (0x10) IX[B]
   [32] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [33] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [34] -1   0   0x000001f0 - 0x000001f0 (0x1) IX[B]
   [35] -1   0   0x000001f0 - 0x000001f7 (0x8) IX[B]
   [36] -1   0   0x000018e0 - 0x000018ff (0x20) IX[B]
   [37] -1   0   0x000018c0 - 0x000018df (0x20) IX[B]
   [38] -1   0   0x000018a0 - 0x000018bf (0x20) IX[B]
   [39] -1   0   0x00001880 - 0x0000189f (0x20) IX[B]
   [40] -1   0   0x00001860 - 0x0000187f (0x20) IX[B]
   [41] -1   0   0x00001840 - 0x0000185f (0x20) IX[B]
   [42] -1   0   0x00002000 - 0x0000207f (0x80) IX[B](B)
   [43] 0   0   0x000003b0 - 0x000003bb (0xc) IS[B]
   [44] 0   0   0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "CalcAlgorithm" is not used
(==) RandR enabled

Hi,
Please check whether you are able to open the PDF through SOST transaction.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant

Satellite M40x will not boot up after CPU upgrade test

I have an M40x Laptop. I took the CPU out of it to replace it with another to test the computer booted up fine so I shut down and took it out and put it's original CPU back in, and it would not boot. Now it will not boot up at all with either of the CPU's all. When I turn on the power all I get is a white screen for a few seconds and the laptop shuts itself back down. Both the CPU's are good because I have since tested them in other computers to make sure that was not the problem.
Anyone have any ideas on what is causing this??

Im not surprised.
As far as I know Toshiba does not support any CPU upgrades and it's not advisable to do something like that.
Its a fact that the CPU replacement on the notebooks is not easy and mostly not recommended.
The processors used in portables are connected to the system board using a process called TCP (Tape Carrier Package). This is a permanent connection method and is used in the interests of miniaturization and heat dissipation.
Did you assign the new heat paste? Its necessary and important if you want to connect the CPU again.
So possibly this is a reason for the no booting.
I think more details you will get from the service guys in your country

CPU upgrades

I'd like to upgrade a tray-loading iMac with the CPU from one of the faster slot-loading ones - 350, 400, whichever.
I'd also like to swap a 450 or 500 MHz CPU from a DV SE that had firewire into the earlier, ordinary slot-loading version, which didn't.
Does anyone know if there's any reason there would be a problem doing either of these changes?
For that matter, if the DV motherboard's okay, any reason I couldn't use the whole thing in the slot-loader? I think there's a video problem, but if that's just a monitor thing and not on the board, it shouldn't be an issue.
Thanks

you are correct, the slot loaders do not have a separate CPU card, its soldered directly to the logic board.
There are CPU upgrades available for tray loaders (don't know if any are actually still produced anymore, but they do exist), but the cost usually just isn't worth it. You could get a used slot loader for the same amount,a nd a used eMac or mac mini for a little bit more.

ThinkPad T61 7664-1KU - cpu upgrade T7500 to T9500 - possible?

Similar Messages

Maybe you are looking for